Good Morning Drew,
They are TenGigabitethernet Interfaces:
PortNameStatus VlanDuplex Speed Type
Te10/0/44 connected xxx a-full a-1000
100/1000/2.5G/5G/10GBaseTX
Have a good day,
Aaron
Aaron Childs Director
Infrastructure Services
You could use offset-list in your router eigrp config.
Aaron
Aaron Childs, CCNA
Associate Director, Networking
Information Technology
www.westfield.ma.edu/it
Please Note: new e-mail address - aa...@westfield.ma.edu
-Original Message-
From: cisco-nsp
Hi MK,
You configure that in the pool.
For example:
ip dhcp pool pc's
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 1.2.3.4
Etc...
ip dhcp pool access-points
network 192.168.2.0 255.255.255.0
default-router 192.168.2.1
dns-server 1.2.3.4
Etc...
Inter
Yep. Sh mac address-table | inc mod/port
Have a good day,
Aaron
Aaron Childs, CCNA
Associate Director, Networking
Information Technology
www.westfield.ma.edu/it
Please Note: new e-mail address - aa...@westfield.ma.edu
-Original Message-
From: cisco-nsp-boun...@puck.nether.net
Although we didn't convert from a WLSM to WiSM (we just waited until the
WiSM was on the market at the suggestion of our reseller.) I also have to
disagree with Andrew on two of his points.
WCS is a really cool product and if you are familiar with the web interface
on the WiSM controllers you'll
Hi Sony,
There aren't any tools that I know of. I converted all of our SUP720's and
SUP2's last summer using the directions here:
http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015bfa6.shtml
The process isn't as painful as it looks, just a little time
Try boot [device]:[image file name]
---
Aaron Childs
Assistant Director, Networking
Westfield State College
http://www.wsc.ma.edu/it/
From: cisco-nsp-boun...@puck.nether.net [cisco-nsp-boun...@puck.nether.net] On
Behalf Of Renelson Panosky
I gave up on calling TAC around 5 years ago. All of my TAC cases are handled
via e-mail (yea, I know it wasn't an option in your case) but I too have gotten
sick of trying to understand their engineers. I agree with William's comment
about the evaluation.
---
Aaron Childs
Assistant
Hi Renelson,
What's the configuration register set to? (sh boot) once you're in IOS. 0x0
will bring you to rommon everytime, 0x2102 will boot the sup using the config
file.
Aaron
-
Aaron Childs
Assistant Director, Networking
Westfield State College
http://www.wsc.ma.edu/it/
Hi Bill,
It all depends on what other modules you have installed in your chassis. I am
running a 6509-E with 3000W power supplies using 110v, however I have to run
them in combined mode. To give you some real-time data here's the output from
my 'sh power':
system power redundancy mode =
Good Afternoon,
A couple of months ago I upgraded our FWSM to version 4 of the code. I
applied a new access-list today and wanted to remove an old one. To my
amazement no access-list blah is no longer a valid command. I have tried
to ask the oracle of Google and Cisco, but I can't find an
I had a similar problem between a 2948-G and a 6506 about two months ago
(CatOS on both devices). The problem was that the trunk between the two
devices was dropping. I tested the fiber (tested ok), moved the links
to a different port on both ends, swapped out the GBICS, swapped out the
fiber
12 matches
Mail list logo