We have a Cisco 2921 running 15.2(3T);
We are seeing PAUSE OUTPUT incrementing on the device, and every time it
does, our users experience pretty nasty jitter and silence on VOIP calls.
The link is 1000BaseLX with a 100MB committed rate; we rarely see more than
10-15MB of output or input traffic
the underlying issue, which is causing
the pauses to be sent in the first place.
-Blake
On Fri, Oct 12, 2012 at 2:05 PM, Jonathan Charles jonv...@gmail.comwrote:
We have a Cisco 2921 running 15.2(3T);
We are seeing PAUSE OUTPUT incrementing on the device, and every time it
does, our users
Not an option.
ROUTER(config-if)#fl?
flow-sampler
Jonathan
On Fri, Oct 12, 2012 at 2:22 PM, Andriy Bilous andriy.bil...@gmail.comwrote:
int g0/1
flow send off
flow rec off
On Fri, Oct 12, 2012 at 9:05 PM, Jonathan Charles jonv...@gmail.com
wrote:
We have a Cisco 2921 running 15.2
So, noticed something weird...
Got a 2851 with 512MB or RAM... if I have a constant ping going thru the
router and I write mem, the ping goes up by a factor of 5
Cisco 2851 (revision 53.50) with 507904K/16384K bytes of memory.
Processor board ID FTX1345A0EY
2 Gigabit Ethernet interfaces
51
-mail address has changed.
On Mon, Jan 25, 2010 at 8:27 AM, Jonathan Charles jonv...@gmail.comwrote:
So, noticed something weird...
Got a 2851 with 512MB or RAM... if I have a constant ping going thru the
router and I write mem, the ping goes up by a factor of 5
Cisco 2851 (revision
one but it is one of
those things that I dont worry about.
Regards,
Jason
--- On Mon, 1/25/10, Jonathan Charles jonv...@gmail.com wrote:
From: Jonathan Charles jonv...@gmail.com
Subject: Re: [cisco-voip] [c-nsp] Wr mem causes massive delay...
To: Byrd, William w...@collier-byrd..net
It is a big config... cuz of all the voipy stuff.
J
On Mon, Jan 25, 2010 at 11:14 AM, Seth Mattinen se...@rollernet.us wrote:
On 1/25/10 8:07 AM, Church, Charles wrote:
This is a software based router, and 'wri mem' is very CPU intensive.
What does the CPU look like before the wri mem is
The short answer is... no.
Cisco said they will never release a 64-bit version of their VPN Client.
However, Anyconnect has a 64-bit variant, however, this requires a
separate license for the ASA...
There is a third-party VPN client for 64-bit that works fine:
http://www.ncp-e.com/en.html
So, does it work?
Jonathan
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
Turned out it was an ACL on the SSH Server that was blocking me... wow, that
was silly.
Curious tho... if I enable proxy arp I break the connection to their AS400
server, if I disable it, I kill the VPN...
Jonathan
On Mon, Sep 15, 2008 at 10:58 PM, D W [EMAIL PROTECTED] wrote:
I haven't
Got an ASA 5505... if I enable proxy arp, users lose connections to their
AS400...
If I disable it, my VPN clients can't connect anywhere...
Any idea why, and how to fix?
Jonathan
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
I have an SSH server on the inside of a network, and the ASA is blocking SSH
requests even tho I have an ACL permitting them and a static NAT to the SSH
server.
The ASA says it is blocked by the outside ACL even tho SSH (TCP 22) is
specifically permitted... any ideas?
Jonathan
I have a 4402 with two subnets, voice and data... and a management
interface.
This is a remote site and the AAA server is at the HQ...
There is no IP address on the service port, but the WLC will not let me add
a route to get to the AAA server... I do not have another subnet to use...
Why can't
boot
In my experience, if the RP shows the correct confreg value, and the
SP doesn't, a wr mem on the RP usually writes the correct value to
the SP.
cheers,
Dale
On Wed, Apr 23, 2008 at 1:36 PM, Jonathan Charles [EMAIL PROTECTED] wrote:
AMLIATLCORE#remote command switch sh boot
We just deployed a 6513E with a Sup720.
It is running IOS, but when it reboots it goes straight into rommon
and you need to type boot to get it to load... once you do that it
boots fine...
My worry is that this site has power issues...
Here is some output:
6513#sh boot
BOOT variable =
Nothing
Just rommon, immediately...
Jonathan
On Tue, Apr 22, 2008 at 10:03 PM, David Coulson [EMAIL PROTECTED] wrote:
Jonathan Charles wrote:
Configuration register is 0x2102
What is the output to the console before it drops you to the rommon prompt
)
cheers,
Dale
On Wed, Apr 23, 2008 at 12:52 PM, Jonathan Charles [EMAIL PROTECTED] wrote:
We just deployed a 6513E with a Sup720.
It is running IOS, but when it reboots it goes straight into rommon
and you need to type boot to get it to load... once you do that it
boots fine
You need to console in and set the SC0 interface up, then you can telnet to it.
Jonathan
On Tue, Mar 25, 2008 at 3:20 PM, Adam Greene [EMAIL PROTECTED] wrote:
How's this for a stupid question?
I'm working remotely on a pair of 6509's: CatOS 8.3(3) / IOS 12.1(8a)E3.
I can telnet to the
.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jonathan
Charles
Sent: Wednesday, February 13, 2008 10:54 PM
To: [EMAIL PROTECTED]; cisco-nsp@puck.nether.net
Subject: Re: [cisco-voip] Cisco VPN Client for 64-bit
Oh, and not that stupid AnyConnect
Well, the Cucumber is ok, it combines CCM 6.X and CUC 6.X in a single
box, the downside is you can't integrate with AD and you can only have
5 remote sites.
Also, since it is a single server, there is no redundancy, so you may
need a big, fat router for SRST depending on how many users you have.
This is just a stab int he dark, but could it be that you need new
PROMs to get the router to see em? I know this was an issue on
2600s...
Jonathan
On Sun, Feb 24, 2008 at 11:24 PM, Travis [EMAIL PROTECTED] wrote:
I purchased 2 new flash SIMMs to upgrade a 3640 from 8MB to 32MB and I'm
The Os mean out of order.
Which means what you are TFTPing is over 18.4MB and crappy TFTP
servers (Solarwinds, Cisco...) reset their sequence number to 0 after
18.4MB... Get 3CDaemon
Jonathan
On Dec 20, 2007 3:50 PM, Adam Greene [EMAIL PROTECTED] wrote:
Hi,
Have you ever received output
on the controller (or service module), you did a channel-group 0
timeslots 1-24 speed 64...
Jonathan
On Dec 11, 2007 7:45 AM, gagandeep singh [EMAIL PROTECTED] wrote:
Hi
What is your meaning about channels.
Regards
Gagandeep
Jonathan Charles [EMAIL PROTECTED] wrote:
On your controller
On your controller, what is the speed set to for the channels?
Jonathan
On Dec 8, 2007 1:09 AM, gagandeep singh [EMAIL PROTECTED] wrote:
Hi
I am facing the errors in multilink but there is no problem on the physical
level.All the serial links are error free.
Regards
Gagandeep
Just a head's up, cuz Cisco changed this...
It used to be you would do EF for voip payload and AF31 for control.
Well, Cisco changed it and now voip control is using CS3, so you need
to do a match any for voip control and hit either.
J
On Nov 8, 2007 9:33 AM, Paul Stewart [EMAIL PROTECTED]
I am building a router for a customer, a 3845, and the customer needs
a full routing table, how much RAM do I need?
They also have a remote location with a 2851 that they want to do the
same thing, is the 2851 capable of handling a full BGP feed?
Jonathan
This is going to sound weird, but I am looking for a utility that will
let me tracroute on a specific port to see if and where a port is
being blocked on a network...
I run into issues where customers have ACLs on their network (that
they don't know about) and it is causing network failures...
, I'm so tired... and I need the load that image into the router...
and I don't have one manner for that... pls... sugestions...
Rgds.
On 10/19/07, Jonathan Charles [EMAIL PROTECTED] wrote:
Well, from rommon, there isn't much you can do...
The goal was to format the flash, and then tftp
memory is incorrect, how can I know if my
flash is working well, or maybe is not working anymore!?
Thanks for your response...
PD. At this moment, my router is in rommon mode, and I don't know
troubleshooting my flash...
On 10/18/07, Jonathan Charles [EMAIL PROTECTED] wrote:
Well, build
Well, build a tarball of your IOS and CME files and just archive tar
/extract it to the flash
Jonathan
On 10/18/07, Adrian Chadd [EMAIL PROTECTED] wrote:
On Thu, Oct 18, 2007, Jonathan Charles wrote:
Issue a format flash:
It takes about 2 seconds and wipes it clean...
Besides
Issue a format flash:
It takes about 2 seconds and wipes it clean...
Besides, no one uses SDM anyway...
Jonathan
On 10/18/07, Jason Travis [EMAIL PROTECTED] wrote:
If you freed up space by using 'delete flash:filename', then you will have
to enter 'squeeze flash:' to actually free up the
No.
This worked fine for 4 years and died this morning... I woke up and it
was all blinky...
Jonathan
On 6/5/07, Dan [EMAIL PROTECTED] wrote:
Weak power supply? Do you have one that you can switch it out with?
Dan.
Jonathan Charles wrote:
I have a Cisco 3550-24... on post all lights
PROTECTED]
- Original Message -
From: [EMAIL PROTECTED]
[EMAIL PROTECTED]
To: Jonathan Charles [EMAIL PROTECTED]
Cc: ciscovoip [EMAIL PROTECTED]; cisco-nsp@puck.nether.net
cisco-nsp@puck.nether.net
Sent: Thu May 31 12:05:56 2007
Subject: Re: [cisco-voip] Yanking Compact Flash while
So, I am curious, can you pull a CF card from a 2821 while the router
is up and running?
We need to replace flaky flash with a new one, but I would rather not
have to talk a remote tech (low skillset) through a ROMMON TFTP
operation..
If not, we can do it the hard waybut I have heard rumors
The only thing on the flash is the IOS and SDM, and we don't use SDM...
Jonathan
On 5/25/07, Seth Mattinen [EMAIL PROTECTED] wrote:
David Coulson wrote:
I do it all the time with routers - Not with a 2800, but with others. I
can't imagine why it would have a problem, unless it's in the
Installed a 6513 for a customer, they want to use SNMP to dynamically poll a
few interfaces for traffic, how do I set this up (CatOS at layer-2) to
poll just
a few interfaces? There is no SNMP configuration on the box.
I want to poll ports 1/1 -1/4
Jonathan
Use WANkiller from solarwinds... there is a freeware demo out there...
Jonathan
On 4/20/07, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Hi,
I´d like to stress some our links. Does anyone know a free traffic
generator?
At.
LUIZ PAULO MAIA
Gerência de Redes e Telecomun / ATOS ORIGIN
37 matches
Mail list logo