Hi all,
For copper ethernet port I know there is an option to force up/up with
no keepalive
But, what about a fiber link?
I have here a 7606 with...
Cisco 7600 Series SPA Interface Processor-400 Rev. 2.5
5-port Gigabit Ethernet Shared Port Adapter
no keepalive command available under
Hi all,
I have this code on a router:
kron occurrence T10660 in 2:0 recurring
policy-list T10660
!
kron policy-list T10660
cli show proc mem sort | redirect tftp://10.225.225.1/T10660-$t
$t is not a variable as in the 'archive' command so I can have the
timestamp in every file generated at
, 2011-11-02 at 15:37 +0100, LM wrote:
kron occurrence T10660 in 2:0 recurring
policy-list T10660
!
kron policy-list T10660
cli show proc mem sort | redirect tftp://10.225.225.1/T10660-$t
$t is not a variable as in the 'archive' command so I can have the
timestamp in every file generated
Is the same in 7600
El 15/06/11 18:46, vinny_abe...@dell.com escribió:
Oh yuck, really?? Is this a limitation of the platform?
-Vinny
-Original Message-
From: cisco-nsp-boun...@puck.nether.net
[mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Nick Hilliard
Sent: Wednesday, June
12.2SRC5 here running EIGRP, BGP, multicast nat, PBR
Just today I found this issue :P, it is scary:
RSat2#sh ip ro vrf EU_Idirect_Normal 10.53.0.226
Routing Table: EU_Idirect_Normal
Routing entry for 10.53.0.226/32
Known via connected, distance 0, metric 0 (connected)
Redistributing via
I did it with L2TP against a router, I posted the config here:
https://supportforums.cisco.com/thread/2012285
El 31/05/11 12:47, Justin M. Streiner escribió:
On Tue, 31 May 2011, Soon Lee wrote:
Is anyone who success to connect vpn for Android on ASA or router?
I tried it with ASA L2TP but i
No, no ACLs with logging option configured at all.
Regarding the commmand, I tried before I sent the email to the list and...
#sh proc cpu sort
^
% Invalid input detected at '^' marker.
So it is not supported so far.
Anyway I took note about this process:
50
No, the SVI is just for management and the only multicast is the VRRP
from the firewalls.
I dont see this behaviour in other 2950 with the SVI in the same vlan,
also all of the 2950s run the same IOS.
Configuration is based on template, so looks like it is not that neither.
For the strange
sw2950 running c2950-i6q4l2-mz.121-22.EA13
Is normal the cpu behaviour? I attached an image, I hope it wont be removed
switch is just managing multicast traffic
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
Here is the link, thanks to let me know.
http://postimage.org/image/2hp8nccw4/
El 12/04/11 16:44, Pierre Emeriaud escribió:
2011/4/12 LMasturlui...@gmail.com:
sw2950 running c2950-i6q4l2-mz.121-22.EA13
Is normal the cpu behaviour? I attached an image, I hope it wont be removed
it has been
I know how to put a ethernet interface into UP/UP status with no
keepalive but.. how to do that with a Frame-relay interface? (Se5/1.3
in my case)
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
: cisco-nsp-boun...@puck.nether.net
[mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of LM
Sent: Thursday, October 14, 2010 9:01 PM
To: cisco-nsp@puck.nether.net
Subject: [c-nsp] 12.4 for 7205vxr npe-g2 recommendation?
just that, any recommendation?
services running:
- nat
- eigrp
- bgp
- hsrp
just that, any recommendation?
services running:
- nat
- eigrp
- bgp
- hsrp
- pim
- cdp
- gre tunnels
- ipsec
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at
which IOS?
El 29/09/10 09:08, sinan akyıldız escribió:
Hi,
I have issues with applying ACL on 7606s. Most of the time I cannot see
matching packets to the ACL entries and the ACLs are not working as
expected.
For testing
I have two access-lists
Extended IP access list 156
10 permit icmp
Several problems with SIP and NAT check bug toolkit for that IOS at
cisco.com
El 22/09/10 10:41, Bikash Bhattarai escribió:
Dear all,
I have just configured a Cisco 1811 with
c181x-advipservicesk9-mz.124-15.T10. If I put my ATA on public IP it works
fine but if I put behind NAT it doesn't
What OIDs do you use to monitor?
El 17/08/10 01:25, Tony Varriale escribió:
- Original Message - From: John Neiberger
jneiber...@gmail.com
To: cisco-nsp@puck.nether.net
Sent: Monday, August 16, 2010 11:02 AM
Subject: [c-nsp] Cisco Multicast Manager
Anyone here running CMM? I've been
With cisco concentrator 3030 works ok, sometimes it get disconnected but
not a big deal ,you can always reconnect.
No problems for me at all, neither the people in the office using it
over ubuntu.
El 10/08/10 18:16, Quinn Snyder escribió:
network-manager-vpnc
in the ubuntu repos.
little
Works perfectly.
Dont import the .pcf file, use to have problems, much better if you
configured the account manually, not a big deal.
El 10/08/10 16:57, Jan Gregor escribió:
Hi,
there exists network-manager plugin for vpnc. Never used it though.
Best regards,
Jan
On 08/10/2010 02:54 PM,
I love NMIS :D
El 04/08/10 05:01, ar escribió:
Hi. Aside from Nagios, any other opensource monitoring tool you are using that
greatly works for cisco especially 7600 series?
thanks
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
Never saw this before, we saw here error cosmetic AAA messages over
3750G and 12.2.44SE1 and SE2
Not this one.
El 04/08/10 14:07, Chris Lane escribió:
All,
Running a C3750 48TS on 12.2(35)SE2 . Used very simple AAA method for
authentication with radius, 4 lines of AAA.
Happened to log into
This is disgusting, specially if your 7200 is at 15% of capacity working
perfectly.
El 04/08/10 14:40, Mounir Mohamed escribió:
Yes very interested.
Thus 7200 will get out of the picture, because the SR train is used on the
7200 series with NPE-G2 in many small size service providers, and
Hi all,
I would like to hear comments/experiences -positive and/or negative-
about the next switches:
ME-3400EG-12CS-M
ME-3400E-24TS-M
One of the main requirements is the option to have 2 redundant power
supplies in each switch and they should be able to replace while the
switch is working.
El 02/08/10 10:18, LM escribió:
Hi all,
I would like to hear comments/experiences -positive and/or negative-
about the next switches:
ME-3400EG-12CS-M
ME-3400E-24TS-M
One of the main requirements is the option to have 2 redundant power
supplies in each switch and they should be able
ironicThat is great!!/ironic ¬¬
El 02/08/10 13:53, Adrian M escribió:
Don't know about the E flavor, but the old version (ME-3400G) have
small buffers and drops output packets.
http://www.gossamer-threads.com/lists/cisco/nsp/80758
___
cisco-nsp
Any experience with STM?
El 21/07/10 17:14, Jeferson Guardia escribió:
iDirect is a good technology, agred with Terry. Besides, they offer great
courses to give training for the staff in US - Virginia.
Rgs,
2010/7/18 Ziv Leyesz...@gilat.net
I second Terry, we have good experience with
According with Cisco
(http://cisco.biz/en/US/docs/routers/1/10008/configuration/guides/ancp/isbl4rdt.html#wp1043711)
I create the next configuration:
!--
ip access-list extended
Thanks for your answer, I will take a look to it.
El 21/07/10 14:11, Anton Kapela escribió:
On Jul 15, 2010, at 6:02 AM, LM wrote:
Hi,
I want to control the SLA gave by our internet provider against USA and Europe.
The issue is that I would like to configure SLA code in our border
Hi,
I want to control the SLA gave by our internet provider against USA and
Europe.
The issue is that I would like to configure SLA code in our border
routers to have some visibility of it.
So, is there anyone in the mailing list who can give me a fixed points
-IPs- to verify this?, I don't
Well, first of all sorry if this email is considered an off-topic subject.
In the other hand I can't see a better place to talk about this.
I use ubuntu 10.04 64bits, firefox 3.6.6 and java 6.20.
I enter at tools.cisco.com to manage the SRs and when I entered in one
of them the firefox lauchs
Nice to see that I am not alone with problems at cisco.com.
I can't understand how is possible to make so ticket website so bad.
El 09/07/10 14:47, Phil Mayers escribió:
On 09/07/10 12:39, LM wrote:
Well, first of all sorry if this email is considered an off-topic
subject.
In the other hand
As far as I can read at Cisco.com:
-
In the following example, the show parser dump command is not available
in Cisco IOS software
because this command was removed in Cisco IOS 15.0(1)M:
Router# show parser dump all
Command accepted, but obsolete, parser dumper has been
I see Input queue: 0/75/1707/0 (size/max/drops/flushes)
Did you play with the command hold-queue XXX in? where XXX is a value
over 75, which is the default value.
El 30/06/10 20:00, Rodney Dunn escribió:
Input queue: 0/75/1707/0 (size/max/drops/flushes)
Hi all,
We are facing here a very strange issue.
We have 4 routers connected to a 3750 stack doing pure L2 stuff.
All 4 routers are talking EIGRP over a VRF-lite environment.
Sometimes, suddenly, without reason -no strange logs, no strange traffic
behaviour as far as we were checking- the
Is there any command inside the switch to determine a possible packet
loss?, more than the error counters under sh int, I am curious about
the ASIC values and buffer issues.
El 22/06/10 10:53, Peter Rathlev escribió:
On Fri, 2010-06-18 at 18:34 +0200, Sascha Pollok wrote:
Any idea how
Few problems also with letters like á é í ó ó and spanish ones like ñ
To avoid problems with spaces we used here the typical underscore _
A classic issue
El 21/06/10 19:20, Rodney Dunn escribió:
So we do care. ;)
Seriously, something like that that doesn't parse on reload is a bug.
Rodney
I am curious about it too, I work in a sat company and I dont see the
reason to do that neither.
El 18/06/10 23:36, Asbjorn Hojmark - Lists escribió:
On Fri, 18 Jun 2010 19:49:14 +, you wrote:
Instead of relying on the routers for IPSEC VPN encryption, I am considering
the use of
36 matches
Mail list logo
