Ivan,
It should work:
interface GigabitEthernet0/11
switchport trunk allowed vlan none
switchport mode trunk
service instance 3 ethernet
encapsulation dot1q 51
!
!
interface GigabitEthernet0/12
switchport trunk allowed vlan none
switchport mode trunk
service instance 4 ethernet
Just what I was after - EVC Local Connect. Looks like i needed a
newer IOS - 15.3(2)S. Thanks to those who replied.
http://www.cisco.com/c/en/us/td/docs/switches/metro/me3600x_3800x/software/release/15-3_2_S/configuration/guide/3800x3600xscg/swevc.html#wp1079580
Ivan
On 20/Feb/2014 7:59
Hi,
Just what I was after - EVC Local Connect. Looks like i needed a
newer IOS - 15.3(2)S. Thanks to those who replied.
http://www.cisco.com/c/en/us/td/docs/switches/metro/me3600x_3800x/software/release/15-3_2_S/configuration/guide/3800x3600xscg/swevc.html#wp1079580
FYI, you also need the
Hi,
I have seen in the config guides at way of send traffic in and out the
same port or even different ports
http://www.cisco.com/c/en/us/td/docs/switches/metro/me3600x_3800x/software/release/15-3_1_S/configuration/guide/3800x3600xscg/swevc.html#wp1051612
I was looking to use the connect
Hi,
You have to use the EVC concept here - create a bridge-domain and add
both service instances to it. I'm also not sure what you're trying to
achieve with the 'no rewrite' command - by default no tag manipulation
is done.
Most of the EVC concepts are explained here:
Hi,
This feature is supported in 15.3(2)S and newer images.
Check
http://www.cisco.com/c/en/us/td/docs/ios/15_3s/release/notes/15_3s_rel_notes/15_3s_feats_important_notes_15_3_2s.html
I've tested it successfully in 15.3(3)S1a
Best regards
George
On Thu, Feb 20, 2014 at 4:45 AM, Ivan
