Message-
From: cisco-nsp-boun...@puck.nether.net [mailto:
cisco-nsp-boun...@puck.nether.net] On Behalf Of Erçin TORUN
Sent: Friday, January 11, 2013 12:07 PM
To: Adam Vitkovsky
Cc: cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] show command for active multicast kbps rate
Hi again,
I've
Sh mfib route rate
Thanks!
Aaron
From: Erçin TORUN [mailto:ercinto...@gmail.com]
Sent: Monday, January 14, 2013 6:18 AM
To: John Neiberger
Cc: Aaron; Adam Vitkovsky; cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] show command for active multicast kbps rate
the command is show mrib
Hi again,
I've enabled the rate-per-route command but still cant see the per flow
rates. Have any idea ? I'm sure that there is a flow cause i'm watching it
and it passes throughout the backbone.
#show mfib route 233.88.168.176 detail
IP Multicast Forwarding Information Base
Entry flags: C -
Of Erçin TORUN
Sent: Friday, January 11, 2013 12:07 PM
To: Adam Vitkovsky
Cc: cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] show command for active multicast kbps rate
Hi again,
I've enabled the rate-per-route command but still cant see the per flow
rates. Have any idea ? I'm sure
-nsp-boun...@puck.nether.net] On Behalf Of Erçin TORUN
Sent: Friday, January 11, 2013 12:07 PM
To: Adam Vitkovsky
Cc: cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] show command for active multicast kbps rate
Hi again,
I've enabled the rate-per-route command but still cant see the per flow
Hi All,
In IOS
--
ERCIN TORUN
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
Hi All,
In IOS show ip mroute active command shows kbps rate for a multicast
flow. In IOS-XR i could not find a command that gives the active bandwidth
rate for multicast flow. I wonder if there is a way to see active multicast
bandwidth rate.
Regards
Erçin TORUN
2013/1/8 Erçin TORUN
In XR its sh mrib route/sh mfib route but in order to get the bw rate you have
to have the following cmd enabled:
multicast-routing
rate-per-route
adam
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
Hi Adam,
Thanks for quick response. I used the sh mrib route before but without
rate-per-route config, will check asap.
2013/1/8 Adam Vitkovsky adam.vitkov...@swan.sk
In XR its sh mrib route/sh mfib route but in order to get the bw rate you
have to have the following cmd enabled: