[c-nsp] SFP-GE-Z

Hey all i connected the mentioned SFP to GSR , but when i make show run on that interface , i found something weiard sh int g6/1/1 | inc media Full Duplex, 1000Mbps, link type is autonegotiation, media type is unknown 0 does anyone faces this before ?? Thanks Best Regards, Mohammad

Re: [c-nsp] Network Drawing tool

http://www.pacestar.com/lanflow/index.html I was working with it, it is cheap and IMHO very good software The only problem is that it doesn't support Visio stencils :-P I don't know if Pacestar guys have change that in the latest versions. El mar, 17-03-2009 a las 20:53 +0200, Mohammad Khalil

[c-nsp] centralized mac filtering

Hi all, Is any solution to filtering wifi mac addresses from one database, if i have more devices and one wireless domain with one ssid? thank you! br Gabor ___ cisco-nsp mailing list cisco-nsp@puck.nether.net

[c-nsp] SFP-GE-Z

Hey all i connected the mentioned SFP to GSR , but when i make show run on that interface , i found something weiard sh int g6/1/1 | inc media Full Duplex, 1000Mbps, link type is autonegotiation, media type is unknown 0 does anyone faces this before ?? Thanks Best Regards, Mohammad Khalil

[c-nsp] Routers SPF calculation time

Dear Sirs, I would like to collect real-world average SPF calculation times in large OSPF or IS-IS areas. If someone work for a big SP please write it to me. And please if someone answer write also the number of routers and the number links that the area consists, and the type of the router

[c-nsp] equivlant of backup interface command in cisco router ethernet interfaces

Dear Techies , what is the equivalent command in juniper for below cisco commands interface gig1/2 backup interface GigabitEthernet5/2 Regards, Shariq Qamar, ___ cisco-nsp mailing list cisco-nsp@puck.nether.net

Re: [c-nsp] Cisco 3750G-24PS Issues with POE

-Original Message- From: Michael K. Smith - Adhost [mailto:mksm...@adhost.com] Sent: 17 March 2009 23:57 To: George Stylianou; cisco-nsp@puck.nether.net Subject: RE: [c-nsp] Cisco 3750G-24PS Issues with POE -Original Message- From: cisco-nsp-boun...@puck.nether.net

Re: [c-nsp] Export routes from VRF to the global routing table

Hi, I am also looking for a way to a complete mutual redistribution between 2 vrfs. For political reasons I am not allowed to put all the interfaces on the redistributing router in the same vrf. Is there some way to do it? If I mutually import/export the route-targets between both vrfs, would

Re: [c-nsp] Cisco 3750G-24PS Issues with POE

sh power inline Module Available Used Remaining (Watts) (Watts)(Watts) -- - - 1 370.00.0 370.0 Interface Admin Oper Power Device Class Max (Watts) -

Re: [c-nsp] OSPF Areas

That resolved the issue. Thanks a lot. On Tue, Mar 17, 2009 at 7:19 PM, Oliver Boehmer (oboehmer) oboeh...@cisco.com wrote: Thermos Saamnet wrote on Tuesday, March 17, 2009 17:09: Hi all, I'm having an issue setting up an OSPF border router using a VRF. Here's the configuration:

[c-nsp] Routers SPF calculation time

Dear Sirs, I would like to collect real-world average SPF calculation times in large OSPF or IS-IS areas. If someone work for a big SP please write it to me. And please if someone answer write also the number of routers and the number links that the area consists, and the type of the router

[c-nsp] bgp_cpu2timeout and %LINK-4-NOMAC

Hi, today I've upgraded the IOS-Software and the Boot-Image on a Lab-Router (7206VXR + NPE-G1) to 12.4(23), since then i can see the following funny messages: *Mar 18 11:35:04.091: bgp_cpu2timeout: seconds: 3, slot: 3 for 5: 0% and 1: 0% *Mar 18 11:35:34.875: bgp_cpu2timeout: seconds:

[c-nsp] capacity planning

Hi, Does anyone know of any (preferably free) tools that is any good in terms of capacity planning for a enterprise? We already have netflow in place and various other monitoring tools and there is no doubt that we are running out of capacity (afaik, we already are), but in the same breath we

Re: [c-nsp] Communities on local prefixes

Hi, I would like to set a BGP community tag on local (non-customer) prefixes before I send them to my peers and customers. Attach your route-map to your redistribution command(s), e.q: router bgp 65001 redistribute connected route-map REDIST-TO-BGP redistribute static route-map

Re: [c-nsp] Communities on local prefixes

Hi Andy, Attach a route-map to your bgp network statement e.g. network x.x.0.0 mask 255.255.0.0 route-map TEST-OUT. This will solve you issue. Cheers, Michiel -Oorspronkelijk bericht- Van: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] Verzonden:

[c-nsp] cisco AnyConnect - cisco 877

Hi Everyone,Does anyone know if Cisco AnyConnect supported in cisco 877 router ?? I know that Cisco AnyConnect is supported in Cisco ASA. This is my Details: 877 version: flash:c870-advipservicesk9-mz.124-24.T.bin WebVpn Config : webvpn gateway SSLVPNGW1 ip address x.x.x.x port 443

[c-nsp] BCP 38 on single-mode uRPF platforms?

List, I'm re-evaluating my BCP 38 strategy on my customer-facing Sup720-3BXL platforms, and would like to hear from the list on what you're doing in similar situations. Since the uRPF logic on these platforms is limited to a global setting of 'reachable-via any' OR 'reachable-via rx', I'm

Re: [c-nsp] centralized mac filtering

Hegedus Gabor wrote: Hi all, Is any solution to filtering wifi mac addresses from one database, if i have more devices and one wireless domain with one ssid? thank you! br Gabor ___ cisco-nsp mailing list cisco-nsp@puck.nether.net

Re: [c-nsp] cisco AnyConnect - cisco 877

There's a configuration guide here: http://www.cisco.com/en/US/products/ps6496/products_configuration_example091 86a0080720346.shtml According to, 877 should be supported. Regards, - Luan Nguyen Chesapeake

[c-nsp] TCAM at Cat4500 Sup6E

Hello! Could anybody clear me with TCAM on Cat4500 Sup6E? Or Cat4900M as it is Sup6E based. There are 64 TCAM blocks. Each of them can be DYNAMICALY configured as 80 or 160-bit with 4096 and 2048 entries accordingly. IPv4 and IPv6 FIBs are builded DYNAMICALY using one or more TCAM blocks.

Re: [c-nsp] centralized mac filtering

Hegedus Gabor wrote: Hegedus Gabor wrote: Hi all, Is any solution to filtering wifi mac addresses from one database, if i have more devices and one wireless domain with one ssid? thank you! br Gabor I think this would be something that RADIUS is good for. You need to look at your

Re: [c-nsp] Cisco 3750G-24PS Issues with POE

George Stylianou wrote: sh power inline Module Available Used Remaining (Watts) (Watts)(Watts) -- - - 1 370.00.0 370.0 Interface Admin Oper Power Device Class Max

Re: [c-nsp] Cisco 3750G-24PS Issues with POE

Huh, that's weird. Are you plugging the phone directly into the switch or is there wiring (patch panels, in-wall wiring, etc.) between the switch and the phone? It seems like it's just not detecting that there's a POE device on the other end. very weird... phones are plugging directly in

Re: [c-nsp] PPPoA Sessions MRTG

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 We are also trying to find similar information and can not. I believe the engineer working on this is writing a script that gets the total ppp sessions and then subtracts the amount of PPPoE sessions to get the amount of PPPoA sessions. - -- -

[c-nsp] CCM7 Mobilty Access Dial peer question

I am trying out the mobile voice access on ccm7 and run into an issue I have two dial peers, when I call the 2103 from my network I get into the ivr, but when I dial the whole number XXX 2103 I get the reception dial-peer voice 1 pots description ***Main Line*** translation-profile

Re: [c-nsp] CCM7 Mobilty Access Dial peer question

Opss wrong group :) -Original Message- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Leslie Meade Sent: Wednesday, March 18, 2009 11:46 AM To: cisco-nsp@puck.nether.net Subject: [c-nsp] CCM7 Mobilty Access Dial peer question I am trying

Re: [c-nsp] centralized mac filtering

Hegedus Gabor wrote: Hi all, Is any solution to filtering wifi mac addresses from one database, if i have more devices and one wireless domain with one ssid? I've done this in the past with great success using FreeRADIUS, MySQL, and HP AP420 access points. It's actually quite simple; the

[c-nsp] L2TPv3 LNS mode

Hello, is there any possibility to route(L3 process) Ethernet encapsulated IP packets arriving at a Cisco router in a L2TPv3 tunnel? In other words, is it possible to configure a Cisco box in LNS role in an Ethernet L2TPv3 setup? L2TP Network Server (LNS)      If a given L2TP session is

Re: [c-nsp] Cisco 3750G-24PS Issues with POE

George Stylianou wrote: Huh, that's weird. Are you plugging the phone directly into the switch or is there wiring (patch panels, in-wall wiring, etc.) between the switch and the phone? It seems like it's just not detecting that there's a POE device on the other end.

Re: [c-nsp] Sup720-3BXL and diag issues

Seems that all cards and in all slots seem to fail. Again, the same cards work fine else were. On Mon, Mar 16, 2009 at 6:47 PM, Phil Mayers p.may...@imperial.ac.ukwrote: On Mon, Mar 16, 2009 at 07:40:30PM +, Jimmy Changa wrote: I have a 6500 with a sup720-3BXL. Every time I put a

Re: [c-nsp] Cisco 3750G-24PS Issues with POE

There is a standard Cisco document Troubleshooting Power over Ethernet (PoE) that explains the whole mess. Available via Google. b...@misn.com On Wed, 2009-03-18 at 20:15 +0200, George Stylianou wrote: Huh, that's weird. Are you plugging the phone directly into the switch or is there

[c-nsp] Cisco 7600: unsupported module

Hi, I have an OSM-2+4GE-WAN+ Line blade that I'm trying to use on a 7600 chassis but it wont power up. Any help as to why it doesn't? The Cisco website seems to claim that the software I'm running should support this Line card. Here is the error message that I see: *Sep 10 06:46:35.347:

Re: [c-nsp] Cisco 7600: unsupported module

Your running a non-wan image. You need a wan image to support this card. Ian Asheesh Jadav wrote: Hi, I have an OSM-2+4GE-WAN+ Line blade that I'm trying to use on a 7600 chassis but it wont power up. Any help as to why it doesn't? The Cisco website seems to claim that the software I'm

Re: [c-nsp] Cisco 7600: unsupported module

Bad answer (Forgot the bundling changed in SR duh), how much memory is installed on the card? Did it used to work before upgrading or is this a new install for the card. Are there more syslog messages than just this one? Ian Ian Cox wrote: Your running a non-wan image. You need a wan image to

Re: [c-nsp] Cisco 7600: unsupported module

Hi Asheesh, Without remembering correctly, it could be the case, that your OSM card is not supported in the 7606-S chassis. You should consult your local Cisco SE about specifications whether it is supported in this chassis model. __ Med venlig hilsen /

Re: [c-nsp] L2TPv3 LNS mode

One could send this over vanilla crypto IPSec; IPSec is routable. We are doing this over here. Regards, Ge Moua | Email: moua0...@umn.edu Network Design Engineer University of Minnesota | Networking Telecommunications Services Gabor Ivanszky wrote: Hello, is there any possibility to

Re: [c-nsp] Cisco 7600: unsupported module

Lars Lystrup Christensen wrote: Hi Asheesh, Without remembering correctly, it could be the case, that your OSM card is not supported in the 7606-S chassis. You should consult your local Cisco SE about specifications whether it is supported in this chassis model. Was looking at this

[c-nsp] Cisco ACE Module error message

hey all we have Cisco 6509 with ACE Module installed actually , the ACE module is used for caching purposes we are facing the below error Mar 14 08:08:01 UTC: %OSPF-4-ERRRCV: Received invalid packet: Bad LLS Checksum from x.x.x.x, Vlan201 anyone's suggestions ?? Thanks in advance Best

[c-nsp] GRE Tunnel 1811 and Backhaul VLAN dot1q

Will this work ? I need to setup a GRE tunnel between the two 1811 so that everything is transparent to the ISP that wants to use our fiber link. ISP is using dot1q vlan. Customer vlan are tagged by modem. Everything needs to be transparent on my side as I don't want to add vlan database and I

Re: [c-nsp] Virtual Access int down after IOS upgrade

For archiving purposes... The issue with the ATM interfaces was due to an older ATM card that wasn't compatible with 12.4(23). Once the card was replaced with a newer enhanced ATM card, all PVC interfaces came online without a problem. -Todd On Mar 14, 2009, at 2:24 PM, Todd Shipway