alguem te,sala cisco webex
Em qua., 1 de abr. de 2020 às 23:04, Anthony Holloway <
avholloway+cisco-v...@gmail.com> escreveu:
> Oh, good to hear!
>
> Yeah NAT and SIP doesn't work without an ALGwellsort of. You
> could apply a Lua script to the SIP trunk to modify OUTBOUND INVITEs,
> eff
I’ve reconfigured it all to use FQDN and re-configured my nodes. And I’m logged
in okay now and MRA is working.
Cheers
Dana
From: NateCCIE
Sent: Thursday, 2 April 2020 12:45 PM
To: Dana Tong
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Can MRA work with old UCM configured with IP
Check to make sure the Expressway-C has a reverse DNS record for the
Expressway-E’s IP address.
Also, upload your Logs to here: https://cway.cisco.com/csa/
CSA usually has good advice for MRA issues.
Thanks
Tommy
Tommy Schlotterer| Engineer
Presidio
| presidio.com<
I know I have done one MRA with IPs, back when MRA was new. You still need the
Cisco Uds srv record to be there and that record needs to be resolvable my the
C.
That old system isn’t using MRA right now, so I don’t know if it’s changed in
newer versions of expressway.
Sent from my iPhone
> O
never tried, but I wouldn't be surprised if FQDN is required. Are your
hosts discovered in the expressway core and showing as TCP Active? I'm
also assuming you have TLS verify mode off?
On Wed, Apr 1, 2020 at 9:13 PM Dana Tong wrote:
> Hi all,
>
>
> I have a customer who was installed some 9 y
Hi,
Jabber is going to connect directly to an LDAP source unless you use UDS.
You'll have to create records in AD to match those sources, or go through the
fun of UDS (avatar hosting, make sure records from your source are right).
You can alternatively supply some other sort of custom lookup ta
Hi all,
I have a customer who was installed some 9 years ago and the hosts were all
configured with IP address instead of FQDN. They're up on UCM 10.5(2) now and I
have spun up Expressway X12.5.7.
The UC Traversal zone is up and running. The Expressway's have certificates
installed.
However I a
Oh, good to hear!
Yeah NAT and SIP doesn't work without an ALGwellsort of. You could
apply a Lua script to the SIP trunk to modify OUTBOUND INVITEs,
effectively doing your own SIP inspection, but then it would apply to all
CUCMs, and you'd need it to apply to only that one. Which you sho
hi,
I have the requirement to search both users configured in AD and its working
fine. I have some local users on cucm as well, i am not able to search them, on
CUCM i have same field populated as AD user, specially mailid.
any suggestions
System version: 12.5.1.11900-146.
Jabber version: 12.
Nope it is actually as simple as they said. Basic sip trunk out of CUCM. No
special profiles, or anything. Am having problems as one of my CUCMs goes
through an ISR to get to RedSky vs an ASA. ISR NAT is being funky but dealing
with that.
Matthew Loraditch
Sr. Network Engineer
p: 443.541.1518
So...are you still without a functional SIP trunk then Matt?
On Tue, Mar 31, 2020 at 8:08 AM Matthew Loraditch <
mloradi...@heliontechnologies.com> wrote:
> Has anyone done this? Surprisingly they don’t provide a bunch of guidance
> here. I’m so used to carriers and other vendors being very very
11 matches
Mail list logo