With mobile remote access, the mobile number is query’s against the cucm. If I
set the calling mask to be different to the cell number, let’s say client main
line. The vxml is sent back to the Cisco cube and the call is release with the
main line as the caller ID.
What I want to know, can
I am exporting the Tomcast certs and i have checked it against a CSR checker to
make sure that everything is good before i submit the CSR.
But I am getting a , in my Subject Alternative Name.
For example
Subject Alternative Name: , ca.forces.net
There is a comma in the subject feild and I
Nope that's not it. i checked that as well
From: James Buchanan james.buchan...@gmail.com
Sent: Monday, May 4, 2015 7:15 AM
To: Leslie Meade
Cc: cisco-voip (cisco-voip@puck.nether.net)
Subject: Re: [cisco-voip] CSR Information
Check the parent domain field
?Ok thanks.
From: bmead...@gmail.com bmead...@gmail.com on behalf of Brian Meade
bmead...@vt.edu
Sent: Tuesday, April 21, 2015 2:02 PM
To: Leslie Meade
Cc: cisco-voip (cisco-voip@puck.nether.net)
Subject: Re: [cisco-voip] EMCC with SME
You'll want just a single
, 2015 1:48 PM
To: Leslie Meade
Cc: cisco-voip (cisco-voip@puck.nether.net)
Subject: Re: [cisco-voip] EMCC with SME
The EMCC config file transfers is all done via TFTP.
The EMCC SIP Trunk only comes into play when trying to route calls back to the
visiting cluster.
Here's a diagram of how
?So I know that in order to make this work you need SIP trunks between
clusters. And what i understand the SIP trunks only carry the communication
for the EMCC config. Question is what if there is a SME between both clusters ?
If the SIP trunks only carry EMCC information and nothing to do
Any one seen a problem where an analog phone gets battery/voltage but no ring
tone. the phone will not work. However if you ring it everything works well.
You are then able to lift the handset and get dial tone and make calls. Give
the port X amount of time and you loose dial tone again.
on behalf of Leslie Meade
leslie.me...@lvs1.com
Sent: Tuesday, March 31, 2015 4:45 AM
To: cisco-voip (cisco-voip@puck.nether.net)
Subject: [cisco-voip] VG350 analog ports
Any one seen a problem where an analog phone gets battery/voltage but no ring
tone. the phone will not work. However if you ring
Can anyone tell me if there are firmware updates in this release ?
I looked at the release notes and I can not see it.
Sent from my iPad
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
I installed this and while 90% of the time I do not have issues I run into this
error every so often.. It does not matter what version of browser I am using I
some times get the error saying it cannot play it.. anyone seen this ?
[cid:image001.png@01D034B0.E0F81EB0]
Is there a away to pull the phone book from Callmanager 10.5 to a web page ?
Client wants to searchable phonebook, that is pulling the data from CUCM.
Cheers
Leslie
___
cisco-voip mailing list
cisco-voip@puck.nether.net
I'd also recommend this way as well. A whole lot easier
Leslie
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of
Matthew Collins
Sent: Monday, January 05, 2015 1:38 AM
To: Ryan Huff; cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Device pack installation
It is currently in use where I am contracting at the moment..
They have get it setup so that the end users/help desk folks never log into
callmanager/unity etc to do MAC's
They also use it to bulk import users, that makes their Unity, Jabber, Remote
destination profile as well as extension
But that is a separate application from the uplinx device program
Leslie Meade
..
Mobile:778.228.4339 | Main: 604.676.5239
Email: leslie.me...@lvs1.commailto:leslie.me...@lvs1.com
From: cisco-voip [mailto:cisco-voip-boun
Client is getting this error when they try to use EM.
The error tells me that it is to do with EMCC and they are not configured for
this, any ideas ?
I have restarted the EM service in the cluster and it was working before hand.
Cheers
Leslie
___
Yes to all. It is not just one site. I have tried other phones in the cluster
and it is also happening to them as well.
From: Ryan Huff [mailto:ryanh...@outlook.com]
Sent: Thursday, November 27, 2014 8:31 AM
To: Leslie Meade; cisco-voip cisco-voip@puck.nether.net
Subject: RE: [cisco-voip
I know that works well, but the need is to have the end user press * and
ring the extension from a call handler
Leslie Meade
..
Mobile:778.228.4339 | Main: 604.676.5239
Email: leslie.me...@lvs1.commailto:leslie.me...@lvs1
I also have seen the same issue, and put everyone onto the same server
Leslie Meade
..
Mobile:778.228.4339 | Main: 604.676.5239
Email: leslie.me...@lvs1.commailto:leslie.me...@lvs1.com
From: cisco-voip [mailto:cisco-voip-boun
I am looking for a call reporting application that will also take into account
abandoned calls. The client is not running UCCX and wants to get reports on
this.
Now I know there are lots of applications that will do in, out and how long
they were on a call for (that's just normal call
I should add this
The client wants a list of calls though the day, or any given time for any
given number or group for example
ext 1234 had 30 inbound calls, 10 outbound calls, 29 abandoned average time on
call was 4 minutes
From: Leslie Meade
Sent: Thursday, October 16, 2014 7:42 AM
Is there a reason why DND on an IP Phone does not show as DND on a jabber
client ?
All other states are working except for DND
Cheers
Leslie
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
think it would have to so with shared lines and DND. If you have shared lines
and place one into DND the other still ring and not show that one is in DND
From: bmead...@gmail.com [mailto:bmead...@gmail.com] On Behalf Of Brian Meade
Sent: Thursday, September 11, 2014 9:03 AM
To: Leslie Meade
Cc
I am trying to find out if there is a bulk import function in Jabber to where a
pre populated list of contacts can be installed ?
As far as I can tell that there is not. Each user will have to manually import
from a XML file.
There is no bulk way of doing this ?
Cheers
They look exactly the same including the gui, and you have to install a COP
file to get them to run. Even 10.5 does not have them included by default.
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Brian
Meade
Sent: Thursday, August 14, 2014 9:03 AM
To: Matthew
That's the strange part there is nothing coming back in the route plat report
or Extension report
Leslie Meade
..
Mobile:778.228.4339 | Main: 604.676.5239
Email: leslie.me...@lvs1.commailto:leslie.me...@lvs1.com
From: Chris Ward
Tired that there was a SCCP template that I deleted but still no go.
Leslie Meade
..
Mobile:778.228.4339 | Main: 604.676.5239
Email: leslie.me...@lvs1.commailto:leslie.me...@lvs1.com
From: Ryan Ratliff (rratliff) [mailto:rratl
Does sage crm support integration into uccx ?
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
While the mediasense app is easy to get running the gui for play back is woeful
at best and no reporting.
Mediasence is a oem of calabrio.
Sent from Samsung Mobile
Original message
From: Chris Ward (chrward)
Date:05/28/2014 10:15 (GMT-08:00)
To: Ken Rhodes
I have a client that is using the 88XX model of phone with KEM's. They also
have a recording profile configured and working with no issues.
However when there is a speed dial configured(either on the device or the KEM)
the call is not being recorded. When we place a packet capture on the Nice
Every line has a recording profile on it. If I select the speed dial it will
select the primary line.
If I make a call from the primary line it records that call. It's only speed
dial that's not functional.
Leslie Meade
I know that the 1st gen phones are end of life, but they should still connect
to a callmanager 10 environment ?
I have a client that wants to upgrade the system, but at this time not willing
to upgrade the handsets.
___
cisco-voip mailing list
31 matches
Mail list logo