I’ve reconfigured it all to use FQDN and re-configured my nodes. And I’m logged
in okay now and MRA is working.
Cheers
Dana
From: NateCCIE
Sent: Thursday, 2 April 2020 12:45 PM
To: Dana Tong
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Can MRA work with old UCM configured with IP
Check to make sure the Expressway-C has a reverse DNS record for the
Expressway-E’s IP address.
Also, upload your Logs to here: https://cway.cisco.com/csa/
CSA usually has good advice for MRA issues.
Thanks
Tommy
Tommy Schlotterer| Engineer
Presidio
|
I know I have done one MRA with IPs, back when MRA was new. You still need the
Cisco Uds srv record to be there and that record needs to be resolvable my the
C.
That old system isn’t using MRA right now, so I don’t know if it’s changed in
newer versions of expressway.
Sent from my iPhone
>
never tried, but I wouldn't be surprised if FQDN is required. Are your
hosts discovered in the expressway core and showing as TCP Active? I'm
also assuming you have TLS verify mode off?
On Wed, Apr 1, 2020 at 9:13 PM Dana Tong wrote:
> Hi all,
>
>
> I have a customer who was installed some 9