Yep I have a 90 day Advanced Networking key now. Am just waiting for the
customer to be available to test again.
Cheers
Do you know how to obtain a permanent license? How can I prove to someone that
I am entitled to this option for Collaboration Edge?
Ie The customer has maintenance on this ha
Good morning,
I have a problem with my CUBE and Caller ID.
The ITSP supports P Asserted ID. I see the PAI from CUCM to CUBE but nothing to
the ITSP.
I have set the "voice service voip, sip" to asserted-id pai.
I now see a PAI going to the ITSP but it is "anonymous".
I have asked the customer to
You need the advanced networking key so you can specify the public IP.
There is no charge for that license when used for collaboration edge (i.e.
Cisco expressway)
On Mar 20, 2014 5:12 AM, "Bruno Nonogaki (AM)" <
bruno.nonog...@dimensiondata.com> wrote:
> If you don't have this key, you have to
Hi all,
Just a pointer after deploying a fresh install. Even though its not documented
you have to make sure ICMP in enabled between the reverse Proxy and the Admin
server otherwise the final system check fails.
Regards
Matthew
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On B
Did you debug ccsip messages (SIP) and then correlate, debug voip dial peer
(h323), debug voip ccapi inout, etc
http://www.cisco.com/c/en/us/support/docs/voice/h323/14081-voip-debugcalls.html
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Reto
Gassmann
Sent: Thursday
Hello Group
we try to set up the SIP Outbounddialer with a UCCE 9.
The UCCE part is working and the PG is sending SIP to the Gateway. However, the
Gateway (2921 IOS 15.2(3) T4) does not accept the SIP requests.
The gateway is also used for PSTN calls to the CUCM. We habe dialpeers set up
to the
Florian –
No, I have not made any configuration changes to the hba.conf file.
First, as I said, Im using a Windows install, not a *nix. Those
instructions are not for windows installs.
Second, those settings are to restrict access to the external
database. At thi
hy
have u checked the local fw on the windows server for inbound connection
from the presence server.
have u done the config in the hba.conf and so on
Am Donnerstag, 20. März 2014 schrieb Jeffrey Girard :
> I have searched the Cisco site and there are tons of documents on how to
> configure the
Florian –
Thanks for the response.
Yes, I have already turned off the firewall completely
No, I have not done any config in the hba.conf - I don’t know what
that is or where its located
-
I have searched the Cisco site and there are tons of documents on how to
configure the database for *nix installs. I, unfortunately, am not skilled in
that arena.
I have downloaded and installed PostgreSQL on a Win2k8R2 server.
I tried to interpret the Cisco doc instructions as best I could
I
I've found that with Cisco, especially Unified Communications, it doesn't
always pay to learn "how it used to be". UC changes so frequently, I've found
that it is better to jump in wherever Cisco is at and start figuring it out
from there.
Sent from my iPhone
> On Mar 20, 2014, at 9:21 AM, Je
At this point if say get a TAC case opened if it is production and you have a
contract/support.
I retired my use of CUPC and moved to JFW . CUPC should be working as long
as all the ownership stuff is setup correctly.
Sent from my iPhone
> On Mar 20, 2014, at 9:14 AM, Jeffrey Girard
> wr
Well at this point is say get a TAC case opened if it's for production
Sent from my iPhone
> On Mar 20, 2014, at 9:14 AM, Jeffrey Girard
> wrote:
>
> Replies inline….
> Jeff
>
> From: Ryan Huff [mailto:rthconsulta...@gmail.com]
> Sent: Wednesday, March 19, 2014 10:21 PM
> To: Jeffrey Girard
If you don't have this key, you have to configure the public address directly
in the vcse interface. NAT will not work.
Regards,
Bruno
Em 20/03/2014 03:11, Dana Tong escreveu:
The SDP in the logs appears to show :
C = IN IP4 192.168.x.x
I’ve emailed my Cisco rep to see if he can get me a de
14 matches
Mail list logo