I think it's on the User Profile and you assign that on the LDAP Directory
Config. Look under User Management->User Settings->User Profile.
On Tue, May 23, 2017 at 6:31 PM, Scott Voll wrote:
> Is there a way to tick the check mark on Home Cluster automatically with
> each
Is there a way to tick the check mark on Home Cluster automatically with
each new user? we are running 11.5.
TIA
Scott
[image: Inline image 1]
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
If you're talking about using a 2900 series router versus something like a
VG224, its essentially the same difference as far as technicalities go. I have
one in my current environment running off an FXS port on our 4431 gateway, just
have it configured via SCCP on CUCM.
From: cisco-voip
I have a router with 4 FXO port and i am thinking about bypassing VG and
directly connecting to Bogan Paging system however, i haven't done this kind of
configuration and that is the reason i am asking.
I am just wondering if someone has a working config.
Thanks
Hamu
Sent from my Sprint
We use our SRST routers with FXO cards as the gateway for our PAs. We’ve used
them successful with Bogan in the past using the module that had the POTS
connection. We’ve also used them successfully with Valcom PA equipment.
I’ve found that if you have a POTS/Analog connection and know the
I’ve connected to bogens in the past by using Valcom V9970s quite a number of
times.
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of
dhortens1 .
Sent: Tuesday, May 23, 2017 12:59 PM
To: norm.nichol...@kitchener.ca
Cc: Cisco VoIP Group
I use a Bogen TAMB2PS as the interface between Cisco analog ports and Bogen
amps.
Thanks
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Hamu
Ebiso
Sent: Tuesday, May 23, 2017 12:48 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] BOGEN PAGING SYSTEM.
Hi