OK - coming at this from a different angle...
For those of you who have multiple video endpoints like SX20 and roomkits
installed, when you dial between those units and other DNs, like Jabber or
hardphones, do you not see the Alerting Name programmed on the far end called
party displayed on
mhhh then try to play with Remote Number Calling Party Transformation CSS.
Create a calling party transformation pattern to change the number from
"prefix + number" to just "number". Keep it in a relevant partition and
assign the CSS to Remote Number Calling Party Transformation CSS on device
Create a dial peer on cube to match the calling number, then use the call
limits in the dial peer to limit the number.
Don’t forget to make it a lower preference, then your main ones, or it will
never hit.Hunt stop in the dial peer so it doesn’t roll over….
Test after hours with your cell
Hi everyone,
This is a shot in the dark here but has anyone seen a product that can
rate-limit SIP calls based on the calling party number?
We've had a few recent incidents where a scammer has put our telephone
exchange into their robocall system and blasted us with presumably
thousands of call
I can't change it, because I need that pattern for calls that we do send
that way. So, I need my cake, and to be able to eat it too. As a work
around, I am just creating one off DNs for the patterns in question*. In
the real world, it's not 1XXX, rather, this is an environment which
thought
Interesting. I’m sending it to Expressway. Out to a SIP trunk to my two C’s.
I’m using the same SIP trunk for my SIP route patterns, so I’m not sure how
much flexibility I have in changing trunk settings without affecting the SIP
routing as well.
---
Lelio Fulgenzi, B.A. | Senior Analyst
Maybe I’m oversimplifying the work around (having not seen your environment),
but could you not just set your redirect CSS to one that doesn’t have
visibility of the 1XXX route pattern?
FWIW, I have agreed with your assessment 100%. It makes no sense at all why
CCM is performing DA/DM on
Where is the call going? Cucm shouldn’t be updating what the user sees with
that config, but the thing your sending the call to is probably updating it and
then cucm shows the update.
Sent from my iPhone
> On Sep 24, 2018, at 12:49 PM, Lelio Fulgenzi wrote:
>
>
> Hmmm, went through the
Hi,
did you try setting the *Always Display Original Dialed Number *service
parameter to True?
Il giorno lun 24 set 2018 alle ore 20:49 Lelio Fulgenzi
ha scritto:
>
>
> Hmmm, went through the effort of building a route group and route list and
> adding the prefix digits I need on the route
Damn! You played a Reverse card on me! Well played.
Well, here's how it made me feel. You were just testing the use of
different CSSs, which caused a difference in Digit Analysis. You didn't
provide any logs to review, but I assume you have a different CSS on each
of the: CTI Port, VGW, and IP
I believe so. Sorry, that’s what I was trying to convey when I said, “…filling
out this info on the config page..” – but that was way too cryptic.
I’m hoping there’s an option.
There’s this neat blog I started reading but did not go deep into that talks
about “local” vs SIP, etc.
Was it when you added the SIP TLD in CUCM?
On Fri, Sep 21, 2018 at 1:46 PM Lelio Fulgenzi wrote:
>
> At some point in my configuration tasks for the roomkit, it seems all
> calls from both the roomkit (CE) and the SX20 (TC) are now sip uri calls. I
> used to dial a DN and not see the @otld
12 matches
Mail list logo