[SOLVED]
Here is what ended up working for me;
ATA190 firmware 1.1.2 (posted to CCO on 02-15-2015) - Specifically states
PLAR isn't supported until Version 1.1.2
SIP Dial Rule with 1 blank PLAR pattern (no button value)
Translation pattern using the *!* wildcard, not (blank)
Traces showed that
For the SIP Dial Rule, all you want it to have is a PLAR with Button 1
set. Don't enter the number you want to PLAR to. Then just set up PLAR
like you would for a SCCP phone with a new CSS/partition/blank translation
pattern.
On Fri, Mar 13, 2015 at 3:30 PM, Barry Howser bhowser5...@gmail.com
@puck.nether.net
*Subject:* [cisco-voip] ATA190 Plar SIP Dial Rule
Hello everyone.
I have an ATA190 that needs to do a plar to 911. My dial plan uses 9 to
access an outside line (including the 911 pattern).
I created a SIP dial rule and added a plar pattern. I added a parameter
called 911
Sorry, it was the ATA187s I tried this on. Can you attach a screenshot of
your dial rule config?
On Fri, Mar 13, 2015 at 4:15 PM, Brian Meade bmead...@vt.edu wrote:
Right, that's correct. Add 2 PLARs to the SIP Dial Rule with descriptions
both with just a button parameter.
I've used this
Looks good to me. Might want to pull the CallManager traces to see if the
call comes in after going off-hook okay. I can look at them if you want to
throw them up on dropbox or something. Sounds like it's doing something
now at least.
On Fri, Mar 13, 2015 at 5:15 PM, Barry Howser
Hello everyone.
I have an ATA190 that needs to do a plar to 911. My dial plan uses 9 to
access an outside line (including the 911 pattern).
I created a SIP dial rule and added a plar pattern. I added a parameter
called 911 in the description and then added 9911 in the value field. I
saved,
Right, that's correct. Add 2 PLARs to the SIP Dial Rule with descriptions
both with just a button parameter.
I've used this for ATA 188s but haven't tested specifically on the 190.
On Fri, Mar 13, 2015 at 3:46 PM, Barry Howser bhowser5...@gmail.com wrote:
hi Brian,
So what you're saying is
Brian,
I have attached the screen shot of the sip dial rule.
I have the ATA187 using the same CSS on the device and line. That CSS only
accesses one partition. That partition has one translation pattern, with a
blank pattern field and the digits 9911 in the Called Party
Transformation field. The
