Right, that's correct. Add 2 PLARs to the SIP Dial Rule with descriptions both with just a button parameter.
I've used this for ATA 188s but haven't tested specifically on the 190. On Fri, Mar 13, 2015 at 3:46 PM, Barry Howser <[email protected]> wrote: > hi Brian, > > So what you're saying is that in the SIP dial rule; I'll click the "Add > Plar" button and then give my parameter a description, select "Button" as > my dial parameter then in the value box I'd enter a "1" or a "2" depending > on if I wanted the *PLAR* working on line 1 or 2 of the ATA. > > I would then assume that if I wanted both ATA lines to plar, I would have > two parameters in the SIP dial rule? > > Oyyyy ..... I wish you would write Cisco docs .... I can understand you, > lol. > > > On Fri, Mar 13, 2015 at 3:38 PM, Brian Meade <[email protected]> wrote: > >> For the SIP Dial Rule, all you want it to have is a PLAR with Button 1 >> set. Don't enter the number you want to PLAR to. Then just set up PLAR >> like you would for a SCCP phone with a new CSS/partition/blank translation >> pattern. >> >> On Fri, Mar 13, 2015 at 3:30 PM, Barry Howser <[email protected]> >> wrote: >> >>> Hello everyone. >>> >>> I have an ATA190 that needs to do a plar to 911. My dial plan uses "9" >>> to access an outside line (including the 911 pattern). >>> >>> I created a SIP dial rule and added a plar pattern. I added a parameter >>> called "911" in the description and then added 9911 in the value field. I >>> saved, applied config and restarted. >>> >>> I have applied that SIP Dial Rule to the ATA190 device's sip dial rule >>> section and reset the ATA. When I take either of the lines off hook with an >>> analog phone, I just get dial tone .... no PLARing. >>> >>> What am I doing wrong? >>> >>> thanks >>> >>> _______________________________________________ >>> cisco-voip mailing list >>> [email protected] >>> https://puck.nether.net/mailman/listinfo/cisco-voip >>> >>> >> >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
