Re: [cisco-voip] TCL Script to play message for hotel room?

[Pawlowski, Adam]

Interesting, I’m going to have to see if we can get a loaner unit.

Seems like there is some confusion even at Cisco as to what these are capable 
of. Granted most of the older tCL scripts and that seemed to have appeared back 
in the early 2000s and haven’t received much loving since. Things like that 
make me wary to continue using them instead of pulling the bandage on them as 
they may not be around forever.

From: Brian Meade 
Sent: Wednesday, February 20, 2019 8:00 AM
To: Jason Aarons (Americas) 
Cc: Pawlowski, Adam ; Sreekanth Narayanan (sreenara) 
; Lelio Fulgenzi ; 
cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] TCL Script to play message for hotel room?

That's good to know.  Maybe I'll see if I can get one of these fax detect 
scripts working.

On Wed, Feb 20, 2019 at 7:20 AM Jason Aarons (Americas) 
mailto:jason.aar...@dimensiondata.com>> wrote:
To followup I had no issues running a TCL script that played a prompt and 
continued call out.  Google play_message_2_calling_then_connect.tcl

IOS XE 16.6.5 on ISR 4431

conf t
app
service welcome bootflash:play_message_2_calling_then_connect.tcl

dial-peer voice 24 voip
service welcome

As stated I understand CVP/VXML is not supported, but good to know basic TCL 
working.

-jason

From: cisco-voip 
mailto:cisco-voip-boun...@puck.nether.net>> 
On Behalf Of Pawlowski, Adam
Sent: Friday, February 15, 2019 2:55 PM
To: 'Sreekanth Narayanan (sreenara)' 
mailto:sreen...@cisco.com>>; Lelio Fulgenzi 
mailto:le...@uoguelph.ca>>; 'Brian Meade' 
mailto:bmead...@vt.edu>>
Cc: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
Subject: Re: [cisco-voip] TCL Script to play message for hotel room?


And yes it seems that on/off ramp faxing and TCL audio are dead so on to other 
things.

I can do this easily with Asterisk, it is just another thing to maintain.

One of the things we did use this for was having a fallthrough recording if all 
the dialpeers were dead to the UCM on a PRI gateway, we’d play something 
letting people know we were having an issue and check a website, versus sending 
back the a cause and having them get a recording that caused the caller to try 
over and over.

Things move on, such is life I guess.

Thanks for all the information

Adam
SUNYAB

From: Sreekanth Narayanan (sreenara) 
mailto:sreen...@cisco.com>>
Sent: Monday, February 11, 2019 10:43 PM
To: Lelio Fulgenzi mailto:le...@uoguelph.ca>>; Pawlowski, 
Adam mailto:aj...@buffalo.edu>>; 'Brian Meade' 
mailto:bmead...@vt.edu>>
Cc: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
Subject: RE: [cisco-voip] TCL Script to play message for hotel room?

Yes, VXML is no longer supported on the ISR4K so these routers cannot be used 
in a CVP deployment as VXML gateways.
The VVB is the alternative.

I’m not sure the fax TCL script has been tested on ISR4K, but BACD has been 
tested and works fine.

Regards
Sreekanth

From: cisco-voip 
mailto:cisco-voip-boun...@puck.nether.net>> 
On Behalf Of Lelio Fulgenzi
Sent: Tuesday, February 12, 2019 01:53 AM
To: Pawlowski, Adam mailto:aj...@buffalo.edu>>; 'Brian 
Meade' mailto:bmead...@vt.edu>>
Cc: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
Subject: Re: [cisco-voip] TCL Script to play message for hotel room?

Is this what you might need?

https://community.cisco.com/t5/contact-center/vxml-gateway-alternatives/td-p/2859129



Munaf Ahmed<https://community.cisco.com/t5/user/viewprofilepage/user-id/317391> 
[Cisco Employee]

Cisco Employee
‎01-05-2017 09:34 PM
One option would to deploy
One option would to deploy UCS-E series server on ISR 4K router and install VVB 
on it.
https://www.cisco.com/c/en/us/support/contact-center/virtualized-voice-browser-12-0-1/model.html


---
Lelio Fulgenzi, B.A. | Senior Analyst
Computing and Communications Services | University of Guelph
Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1
519-824-4120 Ext. 56354 | le...@uoguelph.ca<mailto:le...@uoguelph.ca>

www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs> | @UofGCCS on Instagram, 
Twitter and Facebook

[University of Guelph Cornerstone with Improve Life tagline]

From: cisco-voip 
mailto:cisco-voip-boun...@puck.nether.net>> 
On Behalf Of Pawlowski, Adam
Sent: Monday, February 11, 2019 2:47 PM
To: 'Brian Meade' mailto:bmead...@vt.edu>>
Cc: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
Subject: Re: [cisco-voip] TCL Script to play message for hotel room?

Spoke too soon maybe.

I’m getting answers that refer to VXML but I’m told that TCL is impacted as 
well. There’s a module for the 4K apparently that runs IP IVR to be a VXML 
processor but I can’t find details on this at the moment or what impact that 
has on other functionality.

So maybe panic attack not totally averted.

Adam



From: Brian Meade mailto:bmead...@vt.edu>>
Sent: Monday, February 1

Re: [cisco-voip] TCL Script to play message for hotel room?

[Brian Meade]

That's good to know.  Maybe I'll see if I can get one of these fax detect
scripts working.

On Wed, Feb 20, 2019 at 7:20 AM Jason Aarons (Americas) <
jason.aar...@dimensiondata.com> wrote:

> To followup I had no issues running a TCL script that played a prompt and
> continued call out.  Google play_message_2_calling_then_connect.tcl
>
>
>
> IOS XE 16.6.5 on ISR 4431
>
>
>
> conf t
>
> app
>
> service welcome bootflash:play_message_2_calling_then_connect.tcl
>
>
>
> dial-peer voice 24 voip
>
> service welcome
>
>
>
> As stated I understand CVP/VXML is not supported, but good to know basic
> TCL working.
>
>
>
> -jason
>
>
>
> *From:* cisco-voip  *On Behalf Of 
> *Pawlowski,
> Adam
> *Sent:* Friday, February 15, 2019 2:55 PM
> *To:* 'Sreekanth Narayanan (sreenara)' ; Lelio
> Fulgenzi ; 'Brian Meade' 
> *Cc:* cisco-voip@puck.nether.net
> *Subject:* Re: [cisco-voip] TCL Script to play message for hotel room?
>
>
>
>
>
> And yes it seems that on/off ramp faxing and TCL audio are dead so on to
> other things.
>
>
>
> I can do this easily with Asterisk, it is just another thing to maintain.
>
>
>
> One of the things we did use this for was having a fallthrough recording
> if all the dialpeers were dead to the UCM on a PRI gateway, we’d play
> something letting people know we were having an issue and check a website,
> versus sending back the a cause and having them get a recording that caused
> the caller to try over and over.
>
>
>
> Things move on, such is life I guess.
>
>
>
> Thanks for all the information
>
>
>
> Adam
>
> SUNYAB
>
>
>
> *From:* Sreekanth Narayanan (sreenara) 
> *Sent:* Monday, February 11, 2019 10:43 PM
> *To:* Lelio Fulgenzi ; Pawlowski, Adam <
> aj...@buffalo.edu>; 'Brian Meade' 
> *Cc:* cisco-voip@puck.nether.net
> *Subject:* RE: [cisco-voip] TCL Script to play message for hotel room?
>
>
>
> Yes, VXML is no longer supported on the ISR4K so these routers cannot be
> used in a CVP deployment as VXML gateways.
>
> The VVB is the alternative.
>
>
>
> I’m not sure the fax TCL script has been tested on ISR4K, but BACD has
> been tested and works fine.
>
>
>
> Regards
>
> Sreekanth
>
>
>
> *From:* cisco-voip  *On Behalf Of *Lelio
> Fulgenzi
> *Sent:* Tuesday, February 12, 2019 01:53 AM
> *To:* Pawlowski, Adam ; 'Brian Meade' 
> *Cc:* cisco-voip@puck.nether.net
> *Subject:* Re: [cisco-voip] TCL Script to play message for hotel room?
>
>
>
> Is this what you might need?
>
>
>
>
> https://community.cisco.com/t5/contact-center/vxml-gateway-alternatives/td-p/2859129
>
>
>
>
>
>
> Munaf Ahmed
> <https://community.cisco.com/t5/user/viewprofilepage/user-id/317391> [image:
> Cisco Employee]
>
>
>
> Cisco Employee
>
> ‎01-05-2017 09:34 PM
>
> One option would to deploy
>
> One option would to deploy UCS-E series server on ISR 4K router and
> install VVB on it.
>
>
> https://www.cisco.com/c/en/us/support/contact-center/virtualized-voice-browser-12-0-1/model.html
>
>
>
>
>
> ---
>
> *Lelio Fulgenzi, B.A.* | Senior Analyst
>
> Computing and Communications Services | University of Guelph
>
> Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON |
> N1G 2W1
>
> 519-824-4120 Ext. 56354 | le...@uoguelph.ca
>
>
>
> www.uoguelph.ca/ccs | @UofGCCS on Instagram, Twitter and Facebook
>
>
>
> [image: University of Guelph Cornerstone with Improve Life tagline]
>
>
>
> *From:* cisco-voip  *On Behalf Of 
> *Pawlowski,
> Adam
> *Sent:* Monday, February 11, 2019 2:47 PM
> *To:* 'Brian Meade' 
> *Cc:* cisco-voip@puck.nether.net
> *Subject:* Re: [cisco-voip] TCL Script to play message for hotel room?
>
>
>
> Spoke too soon maybe.
>
>
>
> I’m getting answers that refer to VXML but I’m told that TCL is impacted
> as well. There’s a module for the 4K apparently that runs IP IVR to be a
> VXML processor but I can’t find details on this at the moment or what
> impact that has on other functionality.
>
>
>
> So maybe panic attack not totally averted.
>
>
>
> Adam
>
>
>
>
>
>
>
> *From:* Brian Meade 
> *Sent:* Monday, February 11, 2019 2:21 PM
> *To:* Pawlowski, Adam 
> *Cc:* cisco-voip@puck.nether.net
> *Subject:* Re: [cisco-voip] TCL Script to play message for hotel room?
>
>
>
> This is interesting because I was working to move a customer to a
> different platform due to fax detect scripts no longer working in ISR4k's.
> Should that still be working as we

Re: [cisco-voip] TCL Script to play message for hotel room?

[Jason Aarons (Americas)]

To followup I had no issues running a TCL script that played a prompt and 
continued call out.  Google play_message_2_calling_then_connect.tcl

IOS XE 16.6.5 on ISR 4431

conf t
app
service welcome bootflash:play_message_2_calling_then_connect.tcl

dial-peer voice 24 voip
service welcome

As stated I understand CVP/VXML is not supported, but good to know basic TCL 
working.

-jason

From: cisco-voip  On Behalf Of Pawlowski, 
Adam
Sent: Friday, February 15, 2019 2:55 PM
To: 'Sreekanth Narayanan (sreenara)' ; Lelio Fulgenzi 
; 'Brian Meade' 
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] TCL Script to play message for hotel room?


And yes it seems that on/off ramp faxing and TCL audio are dead so on to other 
things.

I can do this easily with Asterisk, it is just another thing to maintain.

One of the things we did use this for was having a fallthrough recording if all 
the dialpeers were dead to the UCM on a PRI gateway, we’d play something 
letting people know we were having an issue and check a website, versus sending 
back the a cause and having them get a recording that caused the caller to try 
over and over.

Things move on, such is life I guess.

Thanks for all the information

Adam
SUNYAB

From: Sreekanth Narayanan (sreenara) 
mailto:sreen...@cisco.com>>
Sent: Monday, February 11, 2019 10:43 PM
To: Lelio Fulgenzi mailto:le...@uoguelph.ca>>; Pawlowski, 
Adam mailto:aj...@buffalo.edu>>; 'Brian Meade' 
mailto:bmead...@vt.edu>>
Cc: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
Subject: RE: [cisco-voip] TCL Script to play message for hotel room?

Yes, VXML is no longer supported on the ISR4K so these routers cannot be used 
in a CVP deployment as VXML gateways.
The VVB is the alternative.

I’m not sure the fax TCL script has been tested on ISR4K, but BACD has been 
tested and works fine.

Regards
Sreekanth

From: cisco-voip 
mailto:cisco-voip-boun...@puck.nether.net>> 
On Behalf Of Lelio Fulgenzi
Sent: Tuesday, February 12, 2019 01:53 AM
To: Pawlowski, Adam mailto:aj...@buffalo.edu>>; 'Brian 
Meade' mailto:bmead...@vt.edu>>
Cc: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
Subject: Re: [cisco-voip] TCL Script to play message for hotel room?

Is this what you might need?

https://community.cisco.com/t5/contact-center/vxml-gateway-alternatives/td-p/2859129<https://community.cisco.com/t5/contact-center/vxml-gateway-alternatives/td-p/2859129>



Munaf Ahmed<https://community.cisco.com/t5/user/viewprofilepage/user-id/317391> 
[Cisco Employee]

Cisco Employee
‎01-05-2017 09:34 PM
One option would to deploy
One option would to deploy UCS-E series server on ISR 4K router and install VVB 
on it.
https://www.cisco.com/c/en/us/support/contact-center/virtualized-voice-browser-12-0-1/model.html<https://www.cisco.com/c/en/us/support/contact-center/virtualized-voice-browser-12-0-1/model.html>


---
Lelio Fulgenzi, B.A. | Senior Analyst
Computing and Communications Services | University of Guelph
Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1
519-824-4120 Ext. 56354 | le...@uoguelph.ca<mailto:le...@uoguelph.ca>

www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs> | @UofGCCS on Instagram, 
Twitter and Facebook

[University of Guelph Cornerstone with Improve Life tagline]

From: cisco-voip 
mailto:cisco-voip-boun...@puck.nether.net>> 
On Behalf Of Pawlowski, Adam
Sent: Monday, February 11, 2019 2:47 PM
To: 'Brian Meade' mailto:bmead...@vt.edu>>
Cc: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
Subject: Re: [cisco-voip] TCL Script to play message for hotel room?

Spoke too soon maybe.

I’m getting answers that refer to VXML but I’m told that TCL is impacted as 
well. There’s a module for the 4K apparently that runs IP IVR to be a VXML 
processor but I can’t find details on this at the moment or what impact that 
has on other functionality.

So maybe panic attack not totally averted.

Adam



From: Brian Meade mailto:bmead...@vt.edu>>
Sent: Monday, February 11, 2019 2:21 PM
To: Pawlowski, Adam mailto:aj...@buffalo.edu>>
Cc: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
Subject: Re: [cisco-voip] TCL Script to play message for hotel room?

This is interesting because I was working to move a customer to a different 
platform due to fax detect scripts no longer working in ISR4k's.  Should that 
still be working as well?  I thought the new architecture couldn't terminate 
the audio streams like this.

On Mon, Feb 11, 2019 at 1:59 PM Pawlowski, Adam 
mailto:aj...@buffalo.edu>> wrote:
Almost had a panic attack there for a minute.

I heard that's why the DVO functionality moved into the UCM as the new ISR 4k 
didn't support VXML. That was more of a CVP thing I think and VXML is probably 
as ancient and unused as VRML.

The TCL function to terminate a call leg and play a stream I didn't think 

Re: [cisco-voip] TCL Script to play message for hotel room?

[Pawlowski, Adam]

And yes it seems that on/off ramp faxing and TCL audio are dead so on to other 
things.

I can do this easily with Asterisk, it is just another thing to maintain.

One of the things we did use this for was having a fallthrough recording if all 
the dialpeers were dead to the UCM on a PRI gateway, we’d play something 
letting people know we were having an issue and check a website, versus sending 
back the a cause and having them get a recording that caused the caller to try 
over and over.

Things move on, such is life I guess.

Thanks for all the information

Adam
SUNYAB

From: Sreekanth Narayanan (sreenara) 
Sent: Monday, February 11, 2019 10:43 PM
To: Lelio Fulgenzi ; Pawlowski, Adam ; 
'Brian Meade' 
Cc: cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] TCL Script to play message for hotel room?

Yes, VXML is no longer supported on the ISR4K so these routers cannot be used 
in a CVP deployment as VXML gateways.
The VVB is the alternative.

I’m not sure the fax TCL script has been tested on ISR4K, but BACD has been 
tested and works fine.

Regards
Sreekanth

From: cisco-voip 
mailto:cisco-voip-boun...@puck.nether.net>> 
On Behalf Of Lelio Fulgenzi
Sent: Tuesday, February 12, 2019 01:53 AM
To: Pawlowski, Adam mailto:aj...@buffalo.edu>>; 'Brian 
Meade' mailto:bmead...@vt.edu>>
Cc: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
Subject: Re: [cisco-voip] TCL Script to play message for hotel room?

Is this what you might need?

https://community.cisco.com/t5/contact-center/vxml-gateway-alternatives/td-p/2859129



Munaf Ahmed<https://community.cisco.com/t5/user/viewprofilepage/user-id/317391> 
[Cisco Employee]

Cisco Employee
‎01-05-2017 09:34 PM
One option would to deploy
One option would to deploy UCS-E series server on ISR 4K router and install VVB 
on it.
https://www.cisco.com/c/en/us/support/contact-center/virtualized-voice-browser-12-0-1/model.html


---
Lelio Fulgenzi, B.A. | Senior Analyst
Computing and Communications Services | University of Guelph
Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1
519-824-4120 Ext. 56354 | le...@uoguelph.ca<mailto:le...@uoguelph.ca>

www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs> | @UofGCCS on Instagram, 
Twitter and Facebook

[University of Guelph Cornerstone with Improve Life tagline]

From: cisco-voip 
mailto:cisco-voip-boun...@puck.nether.net>> 
On Behalf Of Pawlowski, Adam
Sent: Monday, February 11, 2019 2:47 PM
To: 'Brian Meade' mailto:bmead...@vt.edu>>
Cc: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
Subject: Re: [cisco-voip] TCL Script to play message for hotel room?

Spoke too soon maybe.

I’m getting answers that refer to VXML but I’m told that TCL is impacted as 
well. There’s a module for the 4K apparently that runs IP IVR to be a VXML 
processor but I can’t find details on this at the moment or what impact that 
has on other functionality.

So maybe panic attack not totally averted.

Adam



From: Brian Meade mailto:bmead...@vt.edu>>
Sent: Monday, February 11, 2019 2:21 PM
To: Pawlowski, Adam mailto:aj...@buffalo.edu>>
Cc: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
Subject: Re: [cisco-voip] TCL Script to play message for hotel room?

This is interesting because I was working to move a customer to a different 
platform due to fax detect scripts no longer working in ISR4k's.  Should that 
still be working as well?  I thought the new architecture couldn't terminate 
the audio streams like this.

On Mon, Feb 11, 2019 at 1:59 PM Pawlowski, Adam 
mailto:aj...@buffalo.edu>> wrote:
Almost had a panic attack there for a minute.

I heard that's why the DVO functionality moved into the UCM as the new ISR 4k 
didn't support VXML. That was more of a CVP thing I think and VXML is probably 
as ancient and unused as VRML.

The TCL function to terminate a call leg and play a stream I didn't think was 
related and I take advantage of this on fall through or other cases where I 
want to play an announcement to a caller without hooping through the voicemail 
system.

Good that still works.

Adam


___
cisco-voip mailing list
cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] TCL Script to play message for hotel room?

[Sreekanth Narayanan (sreenara) via cisco-voip]

Yes, VXML is no longer supported on the ISR4K so these routers cannot be used 
in a CVP deployment as VXML gateways.
The VVB is the alternative.

I’m not sure the fax TCL script has been tested on ISR4K, but BACD has been 
tested and works fine.

Regards
Sreekanth

From: cisco-voip  On Behalf Of Lelio 
Fulgenzi
Sent: Tuesday, February 12, 2019 01:53 AM
To: Pawlowski, Adam ; 'Brian Meade' 
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] TCL Script to play message for hotel room?

Is this what you might need?

https://community.cisco.com/t5/contact-center/vxml-gateway-alternatives/td-p/2859129



Munaf Ahmed<https://community.cisco.com/t5/user/viewprofilepage/user-id/317391> 
[Cisco Employee]

Cisco Employee
‎01-05-2017 09:34 PM
One option would to deploy
One option would to deploy UCS-E series server on ISR 4K router and install VVB 
on it.
https://www.cisco.com/c/en/us/support/contact-center/virtualized-voice-browser-12-0-1/model.html


---
Lelio Fulgenzi, B.A. | Senior Analyst
Computing and Communications Services | University of Guelph
Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1
519-824-4120 Ext. 56354 | le...@uoguelph.ca<mailto:le...@uoguelph.ca>

www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs> | @UofGCCS on Instagram, 
Twitter and Facebook

[University of Guelph Cornerstone with Improve Life tagline]

From: cisco-voip 
mailto:cisco-voip-boun...@puck.nether.net>> 
On Behalf Of Pawlowski, Adam
Sent: Monday, February 11, 2019 2:47 PM
To: 'Brian Meade' mailto:bmead...@vt.edu>>
Cc: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
Subject: Re: [cisco-voip] TCL Script to play message for hotel room?

Spoke too soon maybe.

I’m getting answers that refer to VXML but I’m told that TCL is impacted as 
well. There’s a module for the 4K apparently that runs IP IVR to be a VXML 
processor but I can’t find details on this at the moment or what impact that 
has on other functionality.

So maybe panic attack not totally averted.

Adam



From: Brian Meade mailto:bmead...@vt.edu>>
Sent: Monday, February 11, 2019 2:21 PM
To: Pawlowski, Adam mailto:aj...@buffalo.edu>>
Cc: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
Subject: Re: [cisco-voip] TCL Script to play message for hotel room?

This is interesting because I was working to move a customer to a different 
platform due to fax detect scripts no longer working in ISR4k's.  Should that 
still be working as well?  I thought the new architecture couldn't terminate 
the audio streams like this.

On Mon, Feb 11, 2019 at 1:59 PM Pawlowski, Adam 
mailto:aj...@buffalo.edu>> wrote:
Almost had a panic attack there for a minute.

I heard that's why the DVO functionality moved into the UCM as the new ISR 4k 
didn't support VXML. That was more of a CVP thing I think and VXML is probably 
as ancient and unused as VRML.

The TCL function to terminate a call leg and play a stream I didn't think was 
related and I take advantage of this on fall through or other cases where I 
want to play an announcement to a caller without hooping through the voicemail 
system.

Good that still works.

Adam


___
cisco-voip mailing list
cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] TCL Script to play message for hotel room?

[Lelio Fulgenzi]

Is this what you might need?

https://community.cisco.com/t5/contact-center/vxml-gateway-alternatives/td-p/2859129



Munaf Ahmed<https://community.cisco.com/t5/user/viewprofilepage/user-id/317391> 
[Cisco Employee]

Cisco Employee
‎01-05-2017 09:34 PM
One option would to deploy
One option would to deploy UCS-E series server on ISR 4K router and install VVB 
on it.
https://www.cisco.com/c/en/us/support/contact-center/virtualized-voice-browser-12-0-1/model.html


---
Lelio Fulgenzi, B.A. | Senior Analyst
Computing and Communications Services | University of Guelph
Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1
519-824-4120 Ext. 56354 | le...@uoguelph.ca<mailto:le...@uoguelph.ca>

www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs> | @UofGCCS on Instagram, 
Twitter and Facebook

[University of Guelph Cornerstone with Improve Life tagline]

From: cisco-voip  On Behalf Of Pawlowski, 
Adam
Sent: Monday, February 11, 2019 2:47 PM
To: 'Brian Meade' 
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] TCL Script to play message for hotel room?

Spoke too soon maybe.

I’m getting answers that refer to VXML but I’m told that TCL is impacted as 
well. There’s a module for the 4K apparently that runs IP IVR to be a VXML 
processor but I can’t find details on this at the moment or what impact that 
has on other functionality.

So maybe panic attack not totally averted.

Adam



From: Brian Meade mailto:bmead...@vt.edu>>
Sent: Monday, February 11, 2019 2:21 PM
To: Pawlowski, Adam mailto:aj...@buffalo.edu>>
Cc: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
Subject: Re: [cisco-voip] TCL Script to play message for hotel room?

This is interesting because I was working to move a customer to a different 
platform due to fax detect scripts no longer working in ISR4k's.  Should that 
still be working as well?  I thought the new architecture couldn't terminate 
the audio streams like this.

On Mon, Feb 11, 2019 at 1:59 PM Pawlowski, Adam 
mailto:aj...@buffalo.edu>> wrote:
Almost had a panic attack there for a minute.

I heard that's why the DVO functionality moved into the UCM as the new ISR 4k 
didn't support VXML. That was more of a CVP thing I think and VXML is probably 
as ancient and unused as VRML.

The TCL function to terminate a call leg and play a stream I didn't think was 
related and I take advantage of this on fall through or other cases where I 
want to play an announcement to a caller without hooping through the voicemail 
system.

Good that still works.

Adam


___
cisco-voip mailing list
cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] TCL Script to play message for hotel room?

[Pawlowski, Adam]

Spoke too soon maybe.

I’m getting answers that refer to VXML but I’m told that TCL is impacted as 
well. There’s a module for the 4K apparently that runs IP IVR to be a VXML 
processor but I can’t find details on this at the moment or what impact that 
has on other functionality.

So maybe panic attack not totally averted.

Adam



From: Brian Meade 
Sent: Monday, February 11, 2019 2:21 PM
To: Pawlowski, Adam 
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] TCL Script to play message for hotel room?

This is interesting because I was working to move a customer to a different 
platform due to fax detect scripts no longer working in ISR4k's.  Should that 
still be working as well?  I thought the new architecture couldn't terminate 
the audio streams like this.

On Mon, Feb 11, 2019 at 1:59 PM Pawlowski, Adam 
mailto:aj...@buffalo.edu>> wrote:
Almost had a panic attack there for a minute.

I heard that's why the DVO functionality moved into the UCM as the new ISR 4k 
didn't support VXML. That was more of a CVP thing I think and VXML is probably 
as ancient and unused as VRML.

The TCL function to terminate a call leg and play a stream I didn't think was 
related and I take advantage of this on fall through or other cases where I 
want to play an announcement to a caller without hooping through the voicemail 
system.

Good that still works.

Adam


___
cisco-voip mailing list
cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] TCL Script to play message for hotel room?

[Pawlowski, Adam]

I’m going to reach and see if I can find out. If they don’t work then it will 
be back to Unity Connection or maybe Asterisk just as a utility server.

The onramp faxing is slow as molasses and I never had much luck with the 
offramp. Does that hook into something more modern that wouldn’t support its 
own DSP faxing?

From: Brian Meade 
Sent: Monday, February 11, 2019 2:21 PM
To: Pawlowski, Adam 
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] TCL Script to play message for hotel room?

This is interesting because I was working to move a customer to a different 
platform due to fax detect scripts no longer working in ISR4k's.  Should that 
still be working as well?  I thought the new architecture couldn't terminate 
the audio streams like this.

On Mon, Feb 11, 2019 at 1:59 PM Pawlowski, Adam 
mailto:aj...@buffalo.edu>> wrote:
Almost had a panic attack there for a minute.

I heard that's why the DVO functionality moved into the UCM as the new ISR 4k 
didn't support VXML. That was more of a CVP thing I think and VXML is probably 
as ancient and unused as VRML.

The TCL function to terminate a call leg and play a stream I didn't think was 
related and I take advantage of this on fall through or other cases where I 
want to play an announcement to a caller without hooping through the voicemail 
system.

Good that still works.

Adam


___
cisco-voip mailing list
cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] TCL Script to play message for hotel room?

[Brian Meade]

This is interesting because I was working to move a customer to a different
platform due to fax detect scripts no longer working in ISR4k's.  Should
that still be working as well?  I thought the new architecture couldn't
terminate the audio streams like this.

On Mon, Feb 11, 2019 at 1:59 PM Pawlowski, Adam  wrote:

> Almost had a panic attack there for a minute.
>
> I heard that's why the DVO functionality moved into the UCM as the new ISR
> 4k didn't support VXML. That was more of a CVP thing I think and VXML is
> probably as ancient and unused as VRML.
>
> The TCL function to terminate a call leg and play a stream I didn't think
> was related and I take advantage of this on fall through or other cases
> where I want to play an announcement to a caller without hooping through
> the voicemail system.
>
> Good that still works.
>
> Adam
>
>
> ___
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] TCL Script to play message for hotel room?

[Pawlowski, Adam]

Almost had a panic attack there for a minute.

I heard that's why the DVO functionality moved into the UCM as the new ISR 4k 
didn't support VXML. That was more of a CVP thing I think and VXML is probably 
as ancient and unused as VRML.

The TCL function to terminate a call leg and play a stream I didn't think was 
related and I take advantage of this on fall through or other cases where I 
want to play an announcement to a caller without hooping through the voicemail 
system.

Good that still works.

Adam


___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] TCL Script to play message for hotel room?

[Sreekanth Narayanan (sreenara) via cisco-voip]

Yes this is tested in BE4K. BACD is implemented for queuing.
This script should work fine. 
https://software.cisco.com/download/home/286322812/type/282786567/release/3.0.0.6

The bug wasn’t reproducible in the customer environment.

Regards
Sreekanth

From: cisco-voip  On Behalf Of Brian Meade
Sent: Monday, February 11, 2019 09:39 PM
To: Sreekanth 
Cc: cisco-voip (cisco-voip@puck.nether.net) 
Subject: Re: [cisco-voip] TCL Script to play message for hotel room?

Have you tested that?  It looks like it can't play the audio prompts- 
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvm45589

On Mon, Feb 11, 2019 at 11:05 AM Sreekanth 
mailto:sknt...@gmail.com>> wrote:
BACD still works on the 4000 series routers usinf tcl scripts. The BE4K 
solution has implemented this.
On Mon, 11 Feb, 2019, 20:23 Lelio Fulgenzi 
mailto:le...@uoguelph.ca> wrote:
I’m guessing the alternative here is running CUE v9 (with IVR ports)? But not 
sure what intelligence CUE has compared to UCCx. I know that the scripts are 
pretty much the same syntax, so maybe there is that available?



---
Lelio Fulgenzi, B.A. | Senior Analyst
Computing and Communications Services | University of Guelph
Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1
519-824-4120 Ext. 56354 | le...@uoguelph.ca<mailto:le...@uoguelph.ca>

www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs> | @UofGCCS on Instagram, 
Twitter and Facebook


From: Brian Meade mailto:bmead...@vt.edu>>
Sent: Monday, February 11, 2019 9:45 AM
To: Lelio Fulgenzi mailto:le...@uoguelph.ca>>
Cc: Jason Aarons (Americas) 
mailto:jason.aar...@dimensiondata.com>>; 
cisco-voip (cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>) 
mailto:cisco-voip@puck.nether.net>>
Subject: Re: [cisco-voip] TCL Script to play message for hotel room?

Yep unfortunately.

On Mon, Feb 11, 2019 at 9:41 AM Lelio Fulgenzi 
mailto:le...@uoguelph.ca>> wrote:
Does this mean all those people out there using the free auto-attendant scripts 
are out of luck when they migrate to the 4400s?

---
Lelio Fulgenzi, B.A. | Senior Analyst
Computing and Communications Services | University of Guelph
Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1
519-824-4120 Ext. 56354 | le...@uoguelph.ca<mailto:le...@uoguelph.ca>

www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs> | @UofGCCS on Instagram, 
Twitter and Facebook


From: cisco-voip 
mailto:cisco-voip-boun...@puck.nether.net>> 
On Behalf Of Brian Meade
Sent: Monday, February 11, 2019 9:07 AM
To: Jason Aarons (Americas) 
mailto:jason.aar...@dimensiondata.com>>
Cc: cisco-voip (cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>) 
mailto:cisco-voip@puck.nether.net>>
Subject: Re: [cisco-voip] TCL Script to play message for hotel room?

You can't do VXML on ISR4k's so there's no way to play any sort of audio any 
more.  None of the Voice TCL scripts really work on the 4k's if they do any 
media termination so things like fax detection no longer work.

On Sun, Feb 10, 2019 at 8:43 PM Jason Aarons (Americas) 
mailto:jason.aar...@dimensiondata.com>> wrote:

Call is routed to router as #23+number, then a message would need to be played 
flash  “This call will be charged to your account at the rate indicated in your 
room, to accept these charges and continue your call press 1 otherwise hangup” 
then if thye hit 1 send it along to dial-peer.

Anyone seen something like this, don’t have UCCX to script etc.

IOS 16.6.5 on ISR 4431s

-jason



This email and all contents are subject to the following disclaimer:
"http://www.dimensiondata.com/emaildisclaimer;<http://www.dimensiondata.com/Global/Policies/Pages/Email-Disclaimer.aspx>
___
cisco-voip mailing list
cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
___
cisco-voip mailing list
cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] TCL Script to play message for hotel room?

[Brian Meade]

Have you tested that?  It looks like it can't play the audio prompts-
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvm45589

On Mon, Feb 11, 2019 at 11:05 AM Sreekanth  wrote:

> BACD still works on the 4000 series routers usinf tcl scripts. The BE4K
> solution has implemented this.
>
> On Mon, 11 Feb, 2019, 20:23 Lelio Fulgenzi 
>> I’m guessing the alternative here is running CUE v9 (with IVR ports)? But
>> not sure what intelligence CUE has compared to UCCx. I know that the
>> scripts are pretty much the same syntax, so maybe there is that available?
>>
>>
>>
>>
>>
>>
>>
>> ---
>>
>> *Lelio Fulgenzi, B.A.* | Senior Analyst
>>
>> Computing and Communications Services | University of Guelph
>>
>> Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON |
>> N1G 2W1
>>
>> 519-824-4120 Ext. 56354 | le...@uoguelph.ca
>>
>>
>>
>> www.uoguelph.ca/ccs | @UofGCCS on Instagram, Twitter and Facebook
>>
>>
>>
>> [image: University of Guelph Cornerstone with Improve Life tagline]
>>
>>
>>
>> *From:* Brian Meade 
>> *Sent:* Monday, February 11, 2019 9:45 AM
>> *To:* Lelio Fulgenzi 
>> *Cc:* Jason Aarons (Americas) ;
>> cisco-voip (cisco-voip@puck.nether.net) 
>> *Subject:* Re: [cisco-voip] TCL Script to play message for hotel room?
>>
>>
>>
>> Yep unfortunately.
>>
>>
>>
>> On Mon, Feb 11, 2019 at 9:41 AM Lelio Fulgenzi  wrote:
>>
>> Does this mean all those people out there using the free auto-attendant
>> scripts are out of luck when they migrate to the 4400s?
>>
>>
>>
>> ---
>>
>> *Lelio Fulgenzi, B.A.* | Senior Analyst
>>
>> Computing and Communications Services | University of Guelph
>>
>> Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON |
>> N1G 2W1
>>
>> 519-824-4120 Ext. 56354 | le...@uoguelph.ca
>>
>>
>>
>> www.uoguelph.ca/ccs | @UofGCCS on Instagram, Twitter and Facebook
>>
>>
>>
>> [image: University of Guelph Cornerstone with Improve Life tagline]
>>
>>
>>
>> *From:* cisco-voip  *On Behalf Of *Brian
>> Meade
>> *Sent:* Monday, February 11, 2019 9:07 AM
>> *To:* Jason Aarons (Americas) 
>> *Cc:* cisco-voip (cisco-voip@puck.nether.net) > >
>> *Subject:* Re: [cisco-voip] TCL Script to play message for hotel room?
>>
>>
>>
>> You can't do VXML on ISR4k's so there's no way to play any sort of audio
>> any more.  None of the Voice TCL scripts really work on the 4k's if they do
>> any media termination so things like fax detection no longer work.
>>
>>
>>
>> On Sun, Feb 10, 2019 at 8:43 PM Jason Aarons (Americas) <
>> jason.aar...@dimensiondata.com> wrote:
>>
>>
>>
>> Call is routed to router as #23+number, then a message would need to be
>> played flash  “This call will be charged to your account at the rate
>> indicated in your room, to accept these charges and continue your call
>> press 1 otherwise hangup” then if thye hit 1 send it along to dial-peer.
>>
>>
>>
>> Anyone seen something like this, don’t have UCCX to script etc.
>>
>>
>>
>> IOS 16.6.5 on ISR 4431s
>>
>>
>>
>> -jason
>>
>>
>>
>>
>>
>> This email and all contents are subject to the following disclaimer:
>> "http://www.dimensiondata.com/emaildisclaimer;
>> <http://www.dimensiondata.com/Global/Policies/Pages/Email-Disclaimer.aspx>
>>
>> ___
>> cisco-voip mailing list
>> cisco-voip@puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>> ___
>> cisco-voip mailing list
>> cisco-voip@puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] TCL Script to play message for hotel room?

[Sreekanth]

BACD still works on the 4000 series routers usinf tcl scripts. The BE4K
solution has implemented this.

On Mon, 11 Feb, 2019, 20:23 Lelio Fulgenzi  I’m guessing the alternative here is running CUE v9 (with IVR ports)? But
> not sure what intelligence CUE has compared to UCCx. I know that the
> scripts are pretty much the same syntax, so maybe there is that available?
>
>
>
>
>
>
>
> ---
>
> *Lelio Fulgenzi, B.A.* | Senior Analyst
>
> Computing and Communications Services | University of Guelph
>
> Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON |
> N1G 2W1
>
> 519-824-4120 Ext. 56354 | le...@uoguelph.ca
>
>
>
> www.uoguelph.ca/ccs | @UofGCCS on Instagram, Twitter and Facebook
>
>
>
> [image: University of Guelph Cornerstone with Improve Life tagline]
>
>
>
> *From:* Brian Meade 
> *Sent:* Monday, February 11, 2019 9:45 AM
> *To:* Lelio Fulgenzi 
> *Cc:* Jason Aarons (Americas) ;
> cisco-voip (cisco-voip@puck.nether.net) 
> *Subject:* Re: [cisco-voip] TCL Script to play message for hotel room?
>
>
>
> Yep unfortunately.
>
>
>
> On Mon, Feb 11, 2019 at 9:41 AM Lelio Fulgenzi  wrote:
>
> Does this mean all those people out there using the free auto-attendant
> scripts are out of luck when they migrate to the 4400s?
>
>
>
> ---
>
> *Lelio Fulgenzi, B.A.* | Senior Analyst
>
> Computing and Communications Services | University of Guelph
>
> Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON |
> N1G 2W1
>
> 519-824-4120 Ext. 56354 | le...@uoguelph.ca
>
>
>
> www.uoguelph.ca/ccs | @UofGCCS on Instagram, Twitter and Facebook
>
>
>
> [image: University of Guelph Cornerstone with Improve Life tagline]
>
>
>
> *From:* cisco-voip  *On Behalf Of *Brian
> Meade
> *Sent:* Monday, February 11, 2019 9:07 AM
> *To:* Jason Aarons (Americas) 
> *Cc:* cisco-voip (cisco-voip@puck.nether.net) 
> *Subject:* Re: [cisco-voip] TCL Script to play message for hotel room?
>
>
>
> You can't do VXML on ISR4k's so there's no way to play any sort of audio
> any more.  None of the Voice TCL scripts really work on the 4k's if they do
> any media termination so things like fax detection no longer work.
>
>
>
> On Sun, Feb 10, 2019 at 8:43 PM Jason Aarons (Americas) <
> jason.aar...@dimensiondata.com> wrote:
>
>
>
> Call is routed to router as #23+number, then a message would need to be
> played flash  “This call will be charged to your account at the rate
> indicated in your room, to accept these charges and continue your call
> press 1 otherwise hangup” then if thye hit 1 send it along to dial-peer.
>
>
>
> Anyone seen something like this, don’t have UCCX to script etc.
>
>
>
> IOS 16.6.5 on ISR 4431s
>
>
>
> -jason
>
>
>
>
>
> This email and all contents are subject to the following disclaimer:
> "http://www.dimensiondata.com/emaildisclaimer;
> <http://www.dimensiondata.com/Global/Policies/Pages/Email-Disclaimer.aspx>
>
> ___
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> ___
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] TCL Script to play message for hotel room?

[Lelio Fulgenzi]

I’m guessing the alternative here is running CUE v9 (with IVR ports)? But not 
sure what intelligence CUE has compared to UCCx. I know that the scripts are 
pretty much the same syntax, so maybe there is that available?



---
Lelio Fulgenzi, B.A. | Senior Analyst
Computing and Communications Services | University of Guelph
Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1
519-824-4120 Ext. 56354 | le...@uoguelph.ca<mailto:le...@uoguelph.ca>

www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs> | @UofGCCS on Instagram, 
Twitter and Facebook

[University of Guelph Cornerstone with Improve Life tagline]

From: Brian Meade 
Sent: Monday, February 11, 2019 9:45 AM
To: Lelio Fulgenzi 
Cc: Jason Aarons (Americas) ; cisco-voip 
(cisco-voip@puck.nether.net) 
Subject: Re: [cisco-voip] TCL Script to play message for hotel room?

Yep unfortunately.

On Mon, Feb 11, 2019 at 9:41 AM Lelio Fulgenzi 
mailto:le...@uoguelph.ca>> wrote:
Does this mean all those people out there using the free auto-attendant scripts 
are out of luck when they migrate to the 4400s?

---
Lelio Fulgenzi, B.A. | Senior Analyst
Computing and Communications Services | University of Guelph
Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1
519-824-4120 Ext. 56354 | le...@uoguelph.ca<mailto:le...@uoguelph.ca>

www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs> | @UofGCCS on Instagram, 
Twitter and Facebook

[University of Guelph Cornerstone with Improve Life tagline]

From: cisco-voip 
mailto:cisco-voip-boun...@puck.nether.net>> 
On Behalf Of Brian Meade
Sent: Monday, February 11, 2019 9:07 AM
To: Jason Aarons (Americas) 
mailto:jason.aar...@dimensiondata.com>>
Cc: cisco-voip (cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>) 
mailto:cisco-voip@puck.nether.net>>
Subject: Re: [cisco-voip] TCL Script to play message for hotel room?

You can't do VXML on ISR4k's so there's no way to play any sort of audio any 
more.  None of the Voice TCL scripts really work on the 4k's if they do any 
media termination so things like fax detection no longer work.

On Sun, Feb 10, 2019 at 8:43 PM Jason Aarons (Americas) 
mailto:jason.aar...@dimensiondata.com>> wrote:

Call is routed to router as #23+number, then a message would need to be played 
flash  “This call will be charged to your account at the rate indicated in your 
room, to accept these charges and continue your call press 1 otherwise hangup” 
then if thye hit 1 send it along to dial-peer.

Anyone seen something like this, don’t have UCCX to script etc.

IOS 16.6.5 on ISR 4431s

-jason



This email and all contents are subject to the following disclaimer:
"http://www.dimensiondata.com/emaildisclaimer;<http://www.dimensiondata.com/Global/Policies/Pages/Email-Disclaimer.aspx>
___
cisco-voip mailing list
cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] TCL Script to play message for hotel room?

[Brian Meade]

Yep unfortunately.

On Mon, Feb 11, 2019 at 9:41 AM Lelio Fulgenzi  wrote:

> Does this mean all those people out there using the free auto-attendant
> scripts are out of luck when they migrate to the 4400s?
>
>
>
> ---
>
> *Lelio Fulgenzi, B.A.* | Senior Analyst
>
> Computing and Communications Services | University of Guelph
>
> Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON |
> N1G 2W1
>
> 519-824-4120 Ext. 56354 | le...@uoguelph.ca
>
>
>
> www.uoguelph.ca/ccs | @UofGCCS on Instagram, Twitter and Facebook
>
>
>
> [image: University of Guelph Cornerstone with Improve Life tagline]
>
>
>
> *From:* cisco-voip  *On Behalf Of *Brian
> Meade
> *Sent:* Monday, February 11, 2019 9:07 AM
> *To:* Jason Aarons (Americas) 
> *Cc:* cisco-voip (cisco-voip@puck.nether.net) 
> *Subject:* Re: [cisco-voip] TCL Script to play message for hotel room?
>
>
>
> You can't do VXML on ISR4k's so there's no way to play any sort of audio
> any more.  None of the Voice TCL scripts really work on the 4k's if they do
> any media termination so things like fax detection no longer work.
>
>
>
> On Sun, Feb 10, 2019 at 8:43 PM Jason Aarons (Americas) <
> jason.aar...@dimensiondata.com> wrote:
>
>
>
> Call is routed to router as #23+number, then a message would need to be
> played flash  “This call will be charged to your account at the rate
> indicated in your room, to accept these charges and continue your call
> press 1 otherwise hangup” then if thye hit 1 send it along to dial-peer.
>
>
>
> Anyone seen something like this, don’t have UCCX to script etc.
>
>
>
> IOS 16.6.5 on ISR 4431s
>
>
>
> -jason
>
>
>
>
>
> This email and all contents are subject to the following disclaimer:
> "http://www.dimensiondata.com/emaildisclaimer;
> <http://www.dimensiondata.com/Global/Policies/Pages/Email-Disclaimer.aspx>
>
> ___
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] TCL Script to play message for hotel room?

[Lelio Fulgenzi]

Does this mean all those people out there using the free auto-attendant scripts 
are out of luck when they migrate to the 4400s?

---
Lelio Fulgenzi, B.A. | Senior Analyst
Computing and Communications Services | University of Guelph
Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1
519-824-4120 Ext. 56354 | le...@uoguelph.ca<mailto:le...@uoguelph.ca>

www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs> | @UofGCCS on Instagram, 
Twitter and Facebook

[University of Guelph Cornerstone with Improve Life tagline]

From: cisco-voip  On Behalf Of Brian Meade
Sent: Monday, February 11, 2019 9:07 AM
To: Jason Aarons (Americas) 
Cc: cisco-voip (cisco-voip@puck.nether.net) 
Subject: Re: [cisco-voip] TCL Script to play message for hotel room?

You can't do VXML on ISR4k's so there's no way to play any sort of audio any 
more.  None of the Voice TCL scripts really work on the 4k's if they do any 
media termination so things like fax detection no longer work.

On Sun, Feb 10, 2019 at 8:43 PM Jason Aarons (Americas) 
mailto:jason.aar...@dimensiondata.com>> wrote:

Call is routed to router as #23+number, then a message would need to be played 
flash  “This call will be charged to your account at the rate indicated in your 
room, to accept these charges and continue your call press 1 otherwise hangup” 
then if thye hit 1 send it along to dial-peer.

Anyone seen something like this, don’t have UCCX to script etc.

IOS 16.6.5 on ISR 4431s

-jason



This email and all contents are subject to the following disclaimer:
"http://www.dimensiondata.com/emaildisclaimer;<http://www.dimensiondata.com/Global/Policies/Pages/Email-Disclaimer.aspx>
___
cisco-voip mailing list
cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] TCL Script to play message for hotel room?

[Brian Meade]

You can't do VXML on ISR4k's so there's no way to play any sort of audio
any more.  None of the Voice TCL scripts really work on the 4k's if they do
any media termination so things like fax detection no longer work.

On Sun, Feb 10, 2019 at 8:43 PM Jason Aarons (Americas) <
jason.aar...@dimensiondata.com> wrote:

>
>
> Call is routed to router as #23+number, then a message would need to be
> played flash  “This call will be charged to your account at the rate
> indicated in your room, to accept these charges and continue your call
> press 1 otherwise hangup” then if thye hit 1 send it along to dial-peer.
>
>
>
> Anyone seen something like this, don’t have UCCX to script etc.
>
>
>
> IOS 16.6.5 on ISR 4431s
>
>
>
> -jason
>
>
>
>
> This email and all contents are subject to the following disclaimer:
> "http://www.dimensiondata.com/emaildisclaimer;
> 
> ___
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[cisco-voip] TCL Script to play message for hotel room?

[Jason Aarons (Americas)]

   Call is routed to router as #23+number, then a message would need to be 
played flash  "This call will be charged to your account at the rate indicated 
in your room, to accept these charges and continue your call press 1 otherwise 
hangup" then if thye hit 1 send it along to dial-peer.

Anyone seen something like this, don't have UCCX to script etc.

IOS 16.6.5 on ISR 4431s

-jason

This email and all contents are subject to the following disclaimer:

"http://www.dimensiondata.com/emaildisclaimer;
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip