February 3, 2015 11:28:10 AM
SUBJECT: Re: [cisco-voip] easiest and quickest way to disable a PRI
PSTN (MGCP) port?
dang. not working for MGCP.
will try CUCM service parameter. now to figure out the notation.
---
Lelio Fulgenzi, B.A.
Senior Analyst, Network Infrastructure
Computing and Communications
edersen"
Cc: cisco-voip@puck.nether.net
Sent: Tuesday, February 3, 2015 11:28:10 AM
Subject: Re: [cisco-voip] easiest and quickest way to disable a PRI PSTN (MGCP)
port?
dang. not working for MGCP.
will try CUCM service parameter. now to figure out the notation.
---
Lelio Fulgenzi,
ailto:gen...@ucpenguin.com>
Cc: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
Subject: Re: [cisco-voip] easiest and quickest way to disable a PRI PSTN (MGCP)
port?
This is great. I like the idea of busy'ing out the channels.
And I just tested it, it's additive, not destructi
f Of Lelio
Fulgenzi
Sent: 03 February 2015 8:42 AM
To: gen...@ucpenguin.com
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] easiest and quickest way to disable a PRI PSTN (MGCP)
port?
This is great. I like the idea of busy'ing out the channels.
And I just tested it, it's
] On Behalf Of Eric
Pedersen
Sent: Tuesday, February 03, 2015 11:13 AM
To: Lelio Fulgenzi; gen...@ucpenguin.com
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] easiest and quickest way to disable a PRI PSTN (MGCP)
port?
I thought that didn’t work with MGCP PRIs. Did that change? In the past
...@ucpenguin.com
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] easiest and quickest way to disable a PRI PSTN (MGCP)
port?
This is great. I like the idea of busy'ing out the channels.
And I just tested it, it's additive, not destructive, so I can simply add busy
channel stateme
t: Tuesday, February 3, 2015 9:54:48 AM
Subject: Re: [cisco-voip] easiest and quickest way to disable a PRI PSTN (MGCP)
port?
Assuming that you don't care about dropping any active calls:
controller t1 X/X/X
shutdown
Otherwise, you could busy out the channels that are not in use (sh isdn
Assuming that you don't care about dropping any active calls:
controller t1 X/X/X
shutdown
Otherwise, you could busy out the channels that are not in use (sh isdn
service to see status).
interface SerialX/X/X:23
isdn busy b_channel 0-24
On 2015-02-03 08:42, Lelio Fulgenzi wrote:
Good mor
ubject: [cisco-voip] easiest and quickest way to disable a PRI PSTN (MGCP)
port?
Good morning all,
Here's hoping the snow is clearing up if that's what you had outside your
home/office these last few days!
I'm looking for a quick way to disable a PRI PSTN (MGCP) port on my
Good morning all,
Here's hoping the snow is clearing up if that's what you had outside your
home/office these last few days!
I'm looking for a quick way to disable a PRI PSTN (MGCP) port on my 3945
gateway. I need to do some tests on a gateway in my local building, but that
means disabling
10 matches
Mail list logo