I should have mentioned, my spinnakers' max widths are both "only" 184% of J.
Randy
- Original Message -
From: "Randy Stafford via CnC-List"
To: "cnc-list"
Cc: "randy stafford"
Sent: Saturday, May 21, 2016
When I bought C 30-1 HIN 3007972 it came with two spinnakers of different
material weights. They were handed down with the boat when the PO moved it to
Colorado from Traverse City Michigan (where it spent the first 40 years of its
life). The lighter one was made by Babel & Buchbinder, an
Finesse it works great on paint as that is what auto body shops use after the
wet sand the clear coat
Sent from Joe Bognar
> On May 21, 2016, at 5:21 PM, Jake Brodersen via CnC-List
> wrote:
>
> James,
>
> My neighbor with a C 99 buffed out his Awlgrip hull this
That was one of the FAQs at the Talalay website. Evidently the allergy is
because of the rubber sap proteins which also get washed out of the foam
during its manufacture. They also cite that the allergy typically requires
direct contact with latex and since the foam is rarely if ever in direct
Hope you never become alergic to latex.
- Original Message -
From: "Josh Muckley via CnC-List"
To: "C List"
Cc: "Josh Muckley"
Sent: Saturday, May 21, 2016 11:09:33 PM
Subject: Stus-List New mattress!
Hey
Hey guys,
Just wanted to share a really good experience with y'all. We just had a
custom mattress made for Sea Hawk. It is 7" of Talalay latex foam and was
entirely custom built by John at Magic Sleeper in Pottstown, PA. A
competing company which we saw at the boat show, HMC (Handcrafted
Mine is the same color and looked pretty sad when I bought her. I did it
exactly as the directions indicate. I did Poli-prep as I had no idea what was
on it from the PO and then about 6 coats of Poliglow. Got many compliments
afterward from people walking around the yard. It is all the
Ditto.
Dennis C.
Touché 35-1 #83
Mandeville, LA
Sent from my iPhone
> On May 21, 2016, at 10:24 AM, Neil Gallagher via CnC-List
> wrote:
>
> Allen,
>
> When my aluminum tank was shot, I replaced it with a plastic tank:
>
>
Cost? If you don't mind...
What were the symptoms of a slipping transmission?
Josh Muckley
S/V Sea Hawk
1989 C 37+
Solomons, MD
Yanmar 3HM35F w/Kanzaki
On May 21, 2016 6:21 PM, "John and Maryann Read via CnC-List" <
cnc-list@cnc-list.com> wrote:
> Just passing on a good experience for the good
Just passing on a good experience for the good of the order. Have a Yanmar
3GM with Kanzaki transmission. Transmission was slipping. Had my
transmission rebuilt by the following. One week turnaround. Two year
warranty. Cost very reasonable. Uses OEM bearings, seals etc. He reman'd
a gear
James,
My neighbor with a C 99 buffed out his Awlgrip hull this spring with
Finesse It II. Looks fabulous. I didn't think it was recommended by
Awlgrip, but it worked. His hull wasn't too chalky though, just a little
dull.
Jake
Jake Brodersen
C 35 Mk-III "Midnight Mistress"
Dave,
That’s very interesting. My awlgrip (Stars and Stripes blue) looks pretty
sad. Can you give me any info on what you did?
James
Delaney
C 38 Mk2
Oriental NC
From: David Knecht via CnC-List
Sent: Saturday, May 21, 2016 1:06 PM
To: CnC CnC discussion list
Cc: David Knecht
Subject: Re:
Ron,
No they don’t. Run one or the other, but not both. I run the tricolor
offshore or when sailing overnight. I run the lower lights near shore.
Jake
Jake Brodersen
C 35 Mk-III “Midnight Mistress”
Hampton VA
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf
I have been using Poliglow on my Awlgrip hull for 3 years with no ill effects I
can discern. I don’t know where that rumor originated. The hull looked
“awful” before and it looks hugely better after Poliglow. It really needs
repainting but that is a job for another year. I would never use
Thanks for the offer Joe, but I"m in St. Louis.Ron
From: Joseph Bognar via CnC-List
To: cnc-list@cnc-list.com
Cc: Joseph Bognar
Sent: Friday, May 20, 2016 9:21 PM
Subject: Re: Stus-List Removing Polyglow
Ron : where is wild Cheri ? All
I believe mine is rated 186 in STL; but I have a 160% genny, folding prop and
shoal draft. There is a small difference between the shoal and fin keels for
PHRF. From personal experience, I do know the fin keel points higher than my
shoal draft.How did you end up with a chute that has >180%
Do the rules of the road allow the use of a tricolor and lower running lights
at the same time? I didn't think so.RonWild CheriC 30-1STL
From: Andrew Means via CnC-List
To: cnc-list@cnc-list.com
Cc: Andrew Means
Sent: Thursday, May 19,
Florida marine tanks made the original & have the drawings. They produce them
fairly quickly too.
Bob
Bob Boyer
S/V Rainy Days (1983 C Landfall 38 - Hull #230)
Blog: dainyrays.blogspot.com
Email: dainyr...@icloud.com
Annapolis, MD (presently in Baltimore)
> On May 21, 2016, at 10:32 AM, allen
Allen,
When my aluminum tank was shot, I replaced it with a plastic tank:
http://moellermarine.com/product-category/fuel-containment/permanent-fuel-tanks/less-than-20-gals/
Something to consider, it's worked great for me.
Neil Gallagher
Weatherly 35-1
Glen Cove, NY
On 5/21/2016 10:32 AM,
Septima's aluminum 18 gallon fuel tank is shot. Before I have one fabricated
locally, do we know of any source that might stock NOS? SouthShoreYachts
didn't list any.
Allen Miles
s/v Septima
C 30-2
Hampton, VA___
This list is supported by the
They were still around last year when I bought a new one.
Gary
Maryland
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Randy
Stafford via CnC-List
Sent: Friday, May 20, 2016 11:50 PM
To: cnc-list
Cc: randy.staff...@comcast.net
Subject:
21 matches
Mail list logo