Stus-List Replacement Handrails

Listers- Can anyone recommend a source for replacement exterior (cabin top) handrails for a 30-1? I would prefer teak, but would be willing to consider an estimate on stainless steel as well. Thanks in advance. Best Regards, Randy Stafford S/V Grenadine C 30-1 #7 Ken Caryl, CO

Re: Stus-List C 32 Cutlass Bearing Size

Erik, Cutless bearings are now sold by Johnson Durmax, among others, and the names are shown on the .pdf in the link. http://www.duramaxmarine.com/pdf/CutlessBearingMS.pdf BACK, BAIT and BALE are bearings with 1" shaft diameter, with 1-1/4", 1-3/8" and 1-1/2" outside diameters,

Stus-List C 32 Cutlass Bearing Size

Hello, Recently, I had my 1981 C 32 hauled at a boat yard for bottom painting. I noticed that there was a problem with the cutlass bearing. Unfortunately, the boat was launched before I was able to measure the cutlass bearing size. Does anyone know the size of the replacement cutlass bearing for

Re: Stus-List 1988 30MKII 2GM throttle reversed

Allen, not sure about the 30-1 numbering. The 30-2's went up to hull #175 in 1995 which was the last one built, your hull 167 was near the end of the production run. Al RheaumeDrumroll 30-2 # 90 From: allen via CnC-List To: cnc-list@cnc-list.com Cc: allen

Re: Stus-List C 30mkI numbering

Thanks Rick. So what month and year are encoded in your HIN? Cheers, Randy - Original Message - From: "Rick Taillieu via CnC-List" To: "cnc-list" Cc: "Rick Taillieu" Sent: Saturday, June 18, 2016 7:15:02 PM

Stus-List C 29-2 shaft

My 1985 (US built) 29-2 has a 7/8 inch prop shaft. Not sure of packing size. Bob Hickson, P. ENG.,29-2Flying ColoursPickering, ON___ This list is supported by the generous donations of our members. If you like what we do, please help us pay for

Re: Stus-List Awful Vibration - now transmission cable adjustment

We had similar issues with our 3GM30 with Kanzaki transmission about 5 years ago. The shaft was not turning fast enough until RPM’s got up to a certain point then would sort of fully engage but the blades were not symmetrically deployed causing the vibration. Cause was the transmission cone

Re: Stus-List C 30mkI numbering

The plate and HIN won't necessarily match. Mine don't. The last four digits on the small plate are R178, whereas the stamped in serial number on the hull ends in 1177. Maybe mine was manufacturered 11/77, and sold 1/78? No idea Sophia 1978 C MK-1  Toronto, ON   Original Message   From: