Re: Stus-List C hull number

My C 35 has a metal stamped plate below the wheel on the pedestal showing the model, year and serial number. - Original Message - From: Veiko Piirsalu via CnC-List To: cnc-list@cnc-list.com Cc: Veiko Piirsalu Sent: Tue, 14 Aug 2018 09:16:35 -0400 (EDT) Subject: Stus-List C hull

Re: Stus-List Chain plate hull reinforcement

Paul Neil is correct there are more modern materials available so worth looking into. I'll admit I'm a bit old school so what follows is what I've used for many years and am most comfortable with. For repairs such as this to replace wet / rotten balsa core I've stayed with  balsa but also have

Re: Stus-List Rot around chain plate

Dan On my first boat, an O'Day 25 I de-masted after tacking in strong winds due to a leaking chain plate on the port side shroud that over many year (I suspect) had rotted the wooden bulkhead the chain plate was bolted to. Unfortunately due to the design it was almost impossible to detect and

Re: Stus-List [EXTERNAL] Re: Ship's Compass

Mine came with a Ritchie Globemaster as well. James Flamingo IV C 35-1 - Original Message - From: "Joe via CnC-List Della Barba" To: cnc-list@cnc-list.com Cc: "Joe Della Barba" Sent: Tuesday, April 17, 2018 10:45:55 AM Subject:

Re: Stus-List Question for 29mk ii owners

Lisle I co-own C 29 Mk II, s/n 001, White Magic. See the following link for more 29 MkII info (if you look close the brochure pictures are of White Magic!) http://www.frontiernet.net/~markvii/index.htm Sail her in fresh water on Lake Winnipeg (6th largest lake in North America) in Manitoba,

Re: Stus-List Emergency tiller for the CnC 35 mk2

To bad they changed in on the Mk II, it has to be due to the different rudder on the Mk II. It works well on my 35 Mk I (I tested it to make sure it worked) but as you noted it is in front of the steering column on the Mk I. On the 29 Mk II (had one of those too) it is aft of the pedestal and

Re: Stus-List Interior Teak

To clean and kill any mold on wood in the boat I’ve always used a 50/50 water and vinegar mix. Has worked well for me. Cheers James. C 35 Mk1 - Original Message - From: David Castor via CnC-List To: cnc-list@cnc-list.com Cc: David Castor

Re: Stus-List new haylards

Jeff Thanks for the recommendation for zephyrwerks. Cheers, James - Original Message - From: "Jeffrey Nelson via CnC-List" To: cnc-list@cnc-list.com Cc: "Jeffrey Nelson" Sent: Sunday, December 10, 2017 7:35:26 AM Subject: Re:

Re: Stus-List new haylards

through the splash rail outboard of the groove, it's just a PVC tube through a hole. I use that for the whisker pole topping lift. https://drive.google.com/file/d/1axg6mSDjplwNf8AYS_2LHg9KBEM_ijMR8A/view?usp=sharing Neil Gallagher Weatherly, 35-1 Glen Cove, NY On 12/11/2017 10:05 PM, Jim via

Re: Stus-List new haylards

35-1 Glen Cove, NY On 12/10/2017 2:52 PM, Jim via CnC-List wrote: Dennis Thanks for the info and pictures. Your set up looks like what I'm trying to achieve. When you say a small diameter high tech halyard should work, what diameter where you thinking? I purchased 8mm VPC (but have not

Re: Stus-List new haylards

ouche' 35-1 #83 Mandeville, LA (Currently lying Pensacola, FL) On Sun, Dec 10, 2017 at 11:42 AM, Jim via CnC-List < cnc-list@cnc-list.com > wrote: I have a '71 C 35 Mk1 with the original 100% wire main halyard to wire winch beside the mast. In February I purchased 8mm (5/16") Ne

Re: Stus-List new haylards

I have a '71 C 35 Mk1 with the original 100% wire main halyard to wire winch beside the mast. In February I purchased 8mm (5/16") New England VPC to replace the wire halyard but have not yet as I believe I need to replace the mast head sheave (mast still up), remove winch, run line back to the

Re: Stus-List Throttle on C 35 Mk I

Glen When I originally bought my C Mk1, sn 75, I thought it was missing the controls for the side mounted (not on pedestal) Morse Controls and tried to find some new or used and had no luck in the search. Luckily I found the original set of handles for the Morse Control throttle / f-rev

Re: Stus-List CnC-List Digest, Vol 139, Issue 162

I just replaced my wire lifelines with dynemma. I also bought the lifeline hardware/turnbuckles that allowed me to work eye slices. It created a very finished and upgraded look. Am very happy with it so far. > On Aug 31, 2017, at 12:00 PM, cnc-list-requ...@cnc-list.com wrote: > > Send CnC-List

Re: Stus-List Rod Rigging Tension C 32

I have a 1971 C 35 mk1 with an old style rig tension gauge (see pics as follow https://www.dropbox.com/sc/y2fsam4l5vrvz7v/AAAzwvyuC7njm3lEGi3xNJ1Sa Anyone have instructions on how to use this old style gauge? It has a scale reading from 1 to about 3. Cheers, James - Original

Re: Stus-List Looking for recommendation for a good rigger

ckstay adjuster to The Rigging Company and was pretty > satisfied with their service. > https://theriggingco.com/ > >> On Mon, May 15, 2017 at 12:24 PM Jim via CnC-List <cnc-list@cnc-list.com> >> wrote: >> Hi group: >> >> I need rigging repairs to

Stus-List Looking for recommendation for a good rigger

Hi group: I need rigging repairs to my 29 located on the northern Chesapeake. I reached out to Walden rigging, the only riggers I know of, around here, who have a great rep. Sadly they are so busy, it may be late July before I will be able to get my repairs done and use my boat. There are a

Re: Stus-List C 35 Mk1 rudder replace/rebuild

I second that question and am also curious as to how she sails with the straight blade vs the original swept scimitar rudder? James Flamingo IV C 35 Mk1 - Original Message - From: "Joe via CnC-List Della Barba" To: cnc-list@cnc-list.com Cc: "Joe Della

Re: Stus-List List Butyl tape or is there something better?

I use Bed-It-Butyl tape which has been noted by others on this post.  James Neirinck C 35 MK1 Flamingo IV Lake of the Woods, Ontario - Original Message - From: "Chuck Saur via CnC-List" To: cnc-list@cnc-list.com Cc: "Chuck Saur" Sent:

Re: Stus-List Soft spots in Deck

I agree with Mike and had the same issue that I repaired on my previous O'Day 25.  My approach was to cut from the top and did a combination of re-use the cut piece of fiberglass and put in new matting.   Key is to get all the old wet and rotting balsa out and replace with new balsa / plywood

Re: Stus-List Travel Track Width and Tool ID

on how I should use the tension gauge? Cheers, James Neirinck C 35 Mk1, Flamingo IV - Original Message - From: "Neil Schiller via CnC-List" <cnc-list@cnc-list.com> To: "Jim via CnC-List" <cnc-list@cnc-list.com> Cc: "Neil Schiller" <schil...

Stus-List Travel Track Width and Tool ID

Getting my 'new to me last fall' C 35 mk 1 ready for spring launch and am looking for input on the traveler track width (see pic in attached dropbox link) and what the purpose is for a tool that I found on the boat (see pic in attached dropbox link). >From the traveler track picture you can

Stus-List C 35 Mk 1 Owners Manual

I just purchased a 1971 C& C 35 Mk 1 (and just joined this users group!) and am looking for an owners manual for this sailboat. There are C owners manuals for other sizes of C boats but not for the 35ft Mk1 it seems. So any assistance in print or pdf is greatly appreciated. Cheers, Jim