;
>
>
>
> John and Maryann
>
> Legacy III
>
> 1982 C 34
>
> Noank, CT
>
>
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Andrew
> Means via CnC-List
> *Sent:* Monday, June 27, 2016 5:15 PM
> *To:* cnc-list@cnc-list.com
&
ns
Subject: Stus-List Bulkheads separated from cabin top (C 34) Hey all - Last
week while S.V. Safari was bashing upwind offshore en route to Tofino BC I
noticed that the forward bulkheads were creaking. Upon closer inspection I
realized that they had separated entirely from the cabin top b
Andrew,
I get a bit of squeaking between the top of that bulkhead and the
underside of the deck when in any kind of sea. A friend who grew up
sailing on a 35-1 told me they used to put beeswax in that joint to
quiet it down. Not sure if you could anything in there, but might we be
worth a
and Maryann
Legacy III
1982 C 34
Noank, CT
*From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Andrew
Means via CnC-List
*Sent:* Monday, June 27, 2016 5:15 PM
*To:* cnc-list@cnc-list.com
*Cc:* Andrew Means
*Subject:* Stus-List Bulkheads separated from cabin top (C 34)
Hey all
-list.com] On Behalf Of Andrew Means
via CnC-List
Sent: Monday, June 27, 2016 5:15 PM
To: cnc-list@cnc-list.com
Cc: Andrew Means
Subject: Stus-List Bulkheads separated from cabin top (C 34)
Hey all -
Last week while S.V. Safari was bashing upwind offshore en route to Tofino BC I
noticed
Hi Andrew,
I have a similar looking issue on my 1978 C 34, Also have very slight
dimples in the hull at the same places. I've never sensed movement, and
thought not as much as yours, I can see that my bulkheads are not set in as
deep as they may have been at the build.
Aft sides of the bulkheads
Hey all -
Last week while S.V. Safari was bashing upwind offshore en route to Tofino
BC I noticed that the forward bulkheads were creaking. Upon closer
inspection I realized that they had separated entirely from the cabin top
by moving inboard about 1.5cm.
Here’s the port bulkhead: