cell)
>
>
> From: CnC-List on behalf of Michael Cotton
> via CnC-List
> Sent: Friday, December 30, 2016 3:39 PM
> To: cnc-list@cnc-list.com
> Cc: Michael Cotton
> Subject: Re: Stus-List Fwd: Navtec 10 Series 7
>
> Was that Tri-Power in Warwick?
>
>
>
No a place in Woburn, MA.
David F. Risch
(401) 419-4650 (cell)
From: CnC-List on behalf of Michael Cotton via
CnC-List
Sent: Friday, December 30, 2016 3:39 PM
To: cnc-list@cnc-list.com
Cc: Michael Cotton
Subject: Re: Stus-List Fwd: Navtec 10 Series 7
Was
;re easily available).
-Patrick
On Fri, Dec 30, 2016 at 12:43 PM, wrote:
> From: David
> To: "cnc-list@cnc-list.com"
> Cc:
> Date: Fri, 30 Dec 2016 19:47:44 +0000
> Subject: Re: Stus-List Fwd: Navtec 10 Series 7
>
> I took mine to a truck repair shop after I paid
C-List
Sent: Friday, December 30, 2016 3:47:44 PM
To: cnc-list@cnc-list.com
Cc: David
Subject: Re: Stus-List Fwd: Navtec 10 Series 7
I took mine to a truck repair shop after I paid a "Navtec Approved" repair
shop $500 only have it fail again in 14 months...no warranty so I was stuck
wi
ave Godwin via
CnC-List
Sent: Friday, December 30, 2016 11:25 AM
To: cnc-list@cnc-list.com
Cc: Dave Godwin
Subject: Re: Stus-List Fwd: Navtec 10 Series 7 My original Navtec is in the
shop right now. The highest price estimated was $500 but both my rigger and the
hydraulic guy said that would be
cost $500 would have
cost $100 there.
David F. Risch
(401) 419-4650 (cell)
From: CnC-List on behalf of Dave Godwin via
CnC-List
Sent: Friday, December 30, 2016 11:25 AM
To: cnc-list@cnc-list.com
Cc: Dave Godwin
Subject: Re: Stus-List Fwd: Navtec 10 Series 7
M
lto:cenel...@aol.com>
>
>
> -Original Message-
> From: Dave via CnC-List
> To: John McKay
> Cc: Dave ; cnc-list
> Sent: Fri, Dec 30, 2016 10:02 am
> Subject: Stus-List Fwd: Navtec 10 Series 7
>
> John, have taken the liberty of forwarding this to the Cnc li
Dave via CnC-List
To: John McKay
Cc: Dave ; cnc-list
Sent: Fri, Dec 30, 2016 10:02 am
Subject: Stus-List Fwd: Navtec 10 Series 7
John, have taken the liberty of forwarding this to the Cnc list.
Subject: Re: Navtec 10 Series 7
John,
When you say failed, I assume that you mean the seals
John, have taken the liberty of forwarding this to the Cnc list.
> Subject: Re: Navtec 10 Series 7
>
> John,
>
> When you say failed, I assume that you mean the seals now don't.
> If so, Plenty of industrial hydraulics places in the GTA - would expect they
> could fix?
>
> FYI - windstar (33
