Ahh, yes, the old condom in the hot tub pump problem.
you wrote:
I had a hot tub that
>would heal itself on occasion after a brief group hug!
___
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -
sday, May 19, 2015 1:21 PM
To: cnc-list@cnc-list.com
Cc: Rick Rohwer
Subject: Re: Stus-List Impeller Damn...
Where do you look for the parts? any kits available? Thanks
Rick
C&C 37+ Paikea
Poulsbo, WA
___
Email address:
CnC-List@cnc-lis
-list.com
Subject: Re: Stus-List Impeller Damn...
From: cnc-list@cnc-list.com
CC: russ...@telus.net
Hi David,
Probably a pitted shaft at the seal area. Replace shaft & seal no big
deal, assess bearing(s) at the same time.
Cheers,
Russ
Sweet
35 mk-1
At 06:04 PM 18/05/
avid F. Risch
(401) 419-4650 (cell)
--
To: cnc-list@cnc-list.com
Date: Mon, 18 May 2015 18:44:59 -0400
Subject: Re: Stus-List Impeller Damn...
From: cnc-list@cnc-list.com
CC: rickbr...@earthlink.net
David,
If I'm not mistaken, having the Sen-Dur retrofit makes it a fresh
wat
d F. Risch
> (401) 419-4650 (cell)
>
>
> --
> Date: Tue, 19 May 2015 10:21:00 -0700
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List Impeller Damn...
> From: cnc-list@cnc-list.com
> CC: rickroh...@gmail.com
>
>
> Where do you look for the parts? any kits available
: Stus-List Impeller Damn...
From: cnc-list@cnc-list.com
CC: rickroh...@gmail.com
Where do you look for the parts? any kits available? Thanks
RickC&C 37+ PaikeaPoulsbo, WA
On May 19, 2015, at 3:28 AM, Jake Brodersen via CnC-List
wrote:David, The seals and bearings on the raw water
pump
Sent: Monday, May 18, 2015 9:04 PM
> To: CNC CNC
> Cc: David
> Subject: Re: Stus-List Impeller Damn...
>
> Rick,
>
> Thank you. Correct on all counts except the missing vane is from the
> impeller which internally circulates the glycol.
>
> I need to do a bit of
CnC-List
Sent: Monday, May 18, 2015 9:04 PM
To: CNC CNC
Cc: David
Subject: Re: Stus-List Impeller Damn...
Rick,
Thank you. Correct on all counts except the missing vane is from the
impeller which internally circulates the glycol.
I need to do a bit of digging around the Sen-Dur exchanger and it
pump needs to be replaced too. Leaking shaft. $400 for a
pump. Whodathunk?
Damn.
David F. Risch
(401) 419-4650 (cell)
To: cnc-list@cnc-list.com
Date: Mon, 18 May 2015 18:44:59 -0400
Subject: Re: Stus-List Impeller Damn...
From: cnc-list@cnc-list.com
CC: rickbr...@earthlink.net
David
d via
CnC-List
Sent: Sunday, May 17, 2015 6:01 PM
To: CNC CNC
Cc: David
Subject: Re: Stus-List Impeller Damn...
Thanks all.
Checked obvious hose areas. Nothing. Ran it today on the hard, seemed fine,
Will be launched tomorrow. As we are Bermuda bound in June I need to find
that puppy as it
) heat exchanger.
Wish me luck.
David F. Risch
1981 40-2
(401) 419-4650 (cell)
Date: Sun, 17 May 2015 16:11:49 -0500
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Impeller Damn...
From: cnc-list@cnc-list.com
CC: muckl...@gmail.com
You can use the shop-vac to blow out the system too...or a
> removed, I have had no cooling problems for the last year!
>
> Start at one end, and follow it through. Blow out everything as you go.
>
> Gary Nylander
> 30-1 Maryland
>
> - Original Message -
> *From:* Rick Rohwer via CnC-List
> *To:* cnc-list@cnc-list.co
: cnc-list@cnc-list.com
Cc: Rick Rohwer
Sent: Sunday, May 17, 2015 12:44 PM
Subject: Re: Stus-List Impeller Damn...
Hi David,
i’ll chime in and hope it helps.
If you are lucky, the vane was torn to tiny particles and pushed all the way
through the cooling system and you are free as
When I had a raw water cooled 3GM, the 1st time I went to replace the
impellor I found only 1 vane left. Interestingly, the engine was not
overheating.
Some years later when I had an overheating problem it was the exhaust elbow
that had cloggd with a carbon build up. When I removed the elbow I
Hi David,
i’ll chime in and hope it helps.
If you are lucky, the vane was torn to tiny particles and pushed all the way
through the cooling system and you are free as rain!
If you are like me, it is lurking somewhere in the system between the pump and
the exhaust outlet and pretty much the sam
Gets hair balls out of drains too.
- Original Message -
From: Josh Muckley via CnC-List
To: C&C List
Cc: Josh Muckley
Sent: Sunday, May 17, 2015 09:12
Subject: Re: Stus-List Impeller Damn...
Yep, works well for broke off pencil zincs too.
On May 17, 2015 9:1
-0500
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List Impeller Damn...
> From: cnc-list@cnc-list.com
> CC: muckl...@gmail.com
>
> Shop-vac
> On May 17, 2015 9:02 AM, "David via CnC-List"
> wrote:
>
> A first time. Found a missing impeller vane on my 3
Interesting thought...just hook up and suck?
David F. Risch
(401) 419-4650 (cell)
Date: Sun, 17 May 2015 08:03:25 -0500
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Impeller Damn...
From: cnc-list@cnc-list.com
CC: muckl...@gmail.com
Shop-vac
On May 17, 2015 9:02 AM, "David via CnC
Shop-vac
On May 17, 2015 9:02 AM, "David via CnC-List" wrote:
> A first time. Found a missing impeller vane on my 3QM30. The whole damn
> vane. Suggestions before I start tearing the who damned cooling system
> apart? Its a raw water cooled engine with a Sen-Dur retro-fit.
>
> Thanks in adv
A first time. Found a missing impeller vane on my 3QM30. The whole damn vane.
Suggestions before I start tearing the who damned cooling system apart? Its
a raw water cooled engine with a Sen-Dur retro-fit.
Thanks in advance.
David F. Risch
C & C 40-2
(401) 419-4650 (cell)
20 matches
Mail list logo