Stus-List Re: Question and info

Hi Matt, I've found these spiral clips at local bearing and seal shop. Took in one of the old (non-stainless) and they ordered in what I wanted within a couple days. Since the manufacturer order min was some silly number, they ordered me 3 "samples". Jon Tebbens 78 Mega 30 Katherine On Sun, 3 Dec

Stus-List Re: Question and Report

I need a new tank for my 38 the label on the tank was still on it from the manufacturer. I called them and they still had the blueprint for it I just ordered a new one. I converted from gas to diesel so I had them install a return line as well. Here is the link to the company https://miraxfuelpr

Stus-List Re: Question and Report

I think Aluminum is OK for diesel, I would also check industrial or automotive metal tank fabricators. I had a custom aluminum fuel tank made for a Lotus Europa years back and it was easy to source and buy. Dave On Tue, 9 May 2023 at 10:42, Bill Coleman via CnC-List < cnc-list@cnc-list.com> wr

Stus-List Re: Question and Report

Here are a few I can think of http://www.moellermarine.com/product-category/fuel-containment/permanent-fuel-tanks/ https://www.virginiatank.com/ https://www.plastic-mart.com/category/159/marine-holding-tanks Bill On Mon, May 8, 2023 at 11:31 PM Matt Wolford via CnC-

Stus-List Re: Question and Report

st Sent: Tuesday, May 9, 2023 8:15 AM To: 'Stus-List' ; wolf...@erie.net Cc: John Read Subject: Stus-List Re: Question and Report I replaced my fuel tank a few years ago as a precautionary measure to avoid pin hole leaks in mid-summer. After much discussion was advised to have

Stus-List Re: Question and Report

I replaced my fuel tank a few years ago as a precautionary measure to avoid pin hole leaks in mid-summer. After much discussion was advised to have a new aluminum tank fabricated of aircraft grade material to match the old. Main reasons to not use a plastic tank are they are supposedly designe

Stus-List Re: Question and Report

Moeller Marine makes many different sized fuel tanks. I would measure the area in the boat and pick a tank model that fits and then research the web for the best price. All the marine suppliers sell them, West Marine, Defender, Go2Marine, etc. https://duckduckgo.com/?q=moeller+marine+plastic

Stus-List Re: Question

The Main is the chute on a Nonsuch it’s huge! and always does well downwind in our sat. Phrf races John Conklin S/V Halcyon S/V Heartbeat > On Mar 2, 2023, at 5:11 PM, Glen Eddie via CnC-List > wrote: > >  > I have also heard of this mythical creature but I have never seen one. > > I a

Stus-List Re: Question

I have also heard of this mythical creature but I have never seen one. I also raced on a nonsuch once. In all seriousness I knew it was over when the captain took out his lawn chair after crossing the starting line. Get Outlook for Android Glen Eddie​ Legal services pro

Stus-List Re: Question??

On 2021-06-16 6:40 p.m., Adam Hayden via CnC-List wrote: Rob   I know someone in Mahone bay that may need a new engine.  What is the make and model again Sent from my Bell Samsung device over Canada’s largest network. *F

Stus-List Re: Question??

Rob I know someone in Mahone bay that may need a new engine. What is the make and model again Sent from my Bell Samsung device over Canada’s largest network. From: Robert Abbott via CnC-List Sent: Wednesday, June 16, 2021 5:58:41 PM To: cnc-list@cnc-list.com

Stus-List Re: Question??

I recommend contacting this outfit https://schoonerbaymarinallc.com/site/ in Bayfield WI They are a Yanmar dealer. They rebuilt theHurth Kanzaki transmission I use with my Yanmar. They are a little colorful, but competent. Nate 1980 30-1 1994 T31 On Mon, Jun 14, 2021 at 6:31 PM Robert Abbott vi

Stus-List Re: Question??

Hi Bob Please advise engine model (3GM??) and transmission make and model and ratio – should be on a plate. My mechanic may have a rebuilt Kanzaki available John and Maryann Legacy III 1982 C&C 34 Noank, CT From: Robert Abbott via CnC-List [mailto:cnc-list@cnc-list.com] S

Stus-List Re: Question??

Gary: I don't have the model #'s of the engine or transmission but I can get them from the mechanic in whose garage they now sit.  No idea how the tranni failed but it did is all I know.  Not my boat and not my problem but I am aware of what transpired. If you wish, I can contact the mechani

Stus-List Re: Question??

Hello John, You might check the ZFs. My 2year old Yanmar 3YM30AE has one, albeit with an 8 degree angle. My mechanic had strongly urged me to lower the slope of the engine beds in my 37 to promote better oil distribution and therefore engine life. I can discuss this further if there’s interest

Stus-List Re: Question??

"who would want to buy an engine with no available transmission?" Someone with a blown engine and good transmission that is the same. So far I have not seen the model number of the engine or the transmission. Why did the tranny fail after 200 hours? Thanks to all of the subscribers that contribute

Stus-List Re: Question??

Did the person with the Tartan already get a new engine installed? If so, it seems like anyone wanting a Yanmar might give him a call 😊 Normally I would say it is nuts to not just fix the tranny, but given current COVID shortages of everything maybe the parts are not in stock in North America??

Stus-List Re: Question??

ing around for a >> swap out if another repair is needed (if they are identical). I know a guy >> with a Viking 33 that has a completely rebuilt and pristine atomic 4 in his >> garage for that very purpose! He says he can swap out the engine and dial >> it in within a day

Stus-List Re: Question??

What transmission model? Should be a name plate on it. Had my Kanzaki transmission rebuilt in 2016 as was slipping. Mechanic was in New Jersey and provided great service at reasonable pricing. Getting parts easy then but entire transmissions were not available. I want to say they went out of p

Stus-List Re: Question??

> dial it in within a day. > > Danny > > -- Original Message -- > From: "Dennis C. via CnC-List" > To: Stus-List > Cc: "Dennis C." > Subject: Stus-List Re: Question?? > Date: Mon, 14 Jun 2021 20:53:15 -0500 > > There are 68

Stus-List Re: Question??

needed (if they are identical). I know a guy with a Viking 33 that has a completely rebuilt and pristine atomic 4 in his garage for that very purpose! He says he can swap out the engine and dial it in within a day. Danny -- Original Message -- From: "Dennis C. via CnC-List&

Stus-List Re: Question??

There are 68 Kanzaki transmissions listed on eBay right now. Perhaps one will work. There are also sites that sell used and rebuilt trannies. I find it hard to believe he needs a new tranny AND engine. -- Dennis C. Touche' 35-1 #83 Mandeville, LA On Mon, Jun 14, 2021 at 6:32 PM Robert Abbott

Stus-List Re: Question??

Rob, Others will probably want more details on the engine or transmission before they can answer your question with accuracy, but I will say having been an (aircraft) mechanic, might be worth looking at a newer transmission from the same series and having an adaptor plate made to fit the new trans

Stus-List Re: Question re heater transom exhaust thru hull

h Muckley *Subject:* Stus-List Re: Question re heater transom exhaust thru hull Mike, I don't know if it changes anything but ALL of my discharge and exhaust ports come out under the reverse transom.  You can see it in the video linked below. https://drive.google.com/file/d/0B8pEh5lnvP1yb

Stus-List Re: Question re heater transom exhaust thru hull

, NS www.hoytsailing.com From: Dennis C. via CnC-List Sent: May 6, 2021 10:03 AM To: Stus-List Cc: Dennis C. Subject: Stus-List Re: Question re heater transom exhaust thru hull Being from the south where we're more concerned about air conditioners, I'm not familiar with heater exhau

Stus-List Re: Question re heater transom exhaust thru hull

Being from the south where we're more concerned about air conditioners, I'm not familiar with heater exhausts at all. If one goes through a balsa cored portion of the hull or deck, is there concern about heat and the balsa? Or is a heater exhaust fitting designed to protect the core from excessiv

Stus-List Re: Question re heater transom exhaust thru hull

boat but would be a bitch to access from the outside for installation with the boat in the water! Mike From: Josh Muckley via CnC-List Sent: May 5, 2021 11:24 PM To: Stus-List Cc: Josh Muckley Subject: Stus-List Re: Question re heater transom exhaust thru hull Mike, I don't know if it ch

Stus-List Re: Question re heater transom exhaust thru hull

Mike, I don't know if it changes anything but ALL of my discharge and exhaust ports come out under the reverse transom. You can see it in the video linked below. https://drive.google.com/file/d/0B8pEh5lnvP1yb1hNSENwOHRaZ1k/view?usp=drivesdk Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On

Stus-List Re: Question re heater transom exhaust thru hull

A picture is the easiest way to show how mine is installed. I didn't do the work, so I don't know if that ovalized trim ring is standard. https://lh3.googleusercontent.com/pw/ACtC-3dOGxyHGeiFDqOIEGkz5-tkRcjJ-PBQkJ-sXT-N76L8uiaKwQmYEFbODh1tUwmi_0ZPutRsUE4uf6BTNR3zN6yoJbSOhsUeOkzTA7PaFsXE9tCh6ZmUnd_

Stus-List Re: Question re heater transom exhaust thru hull

, 2021 7:45 PM To: Hoyt, Mike via CnC-List Cc: Graham Collins Subject: Stus-List Re: Question re heater transom exhaust thru hull Hi Mike! Haven't seen you in over a year, hope all is well. Secret Plans has an Espar with the exhaust out the transom, it is angled sufficiently that I

Stus-List Re: Question re heater transom exhaust thru hull

Hi Mike!  Haven't seen you in over a year, hope all is well. Secret Plans has an Espar with the exhaust out the transom, it is angled sufficiently that I have absolutely no concerns about drainage, it has worked flawlessly since 2010.  I've got it tucked up high as I could and still get a 12"

Stus-List Re: Question re heater transom exhaust thru hull

Our 35-2 has a modest reverse transom, and the through-hull I got would have just allowed for drainage, but I decided to put on the aft quarter, about 12" forward of the transom edge. The heater is just below the deck, so it's all downhill to the outlet, and I've had no issues so far. Many newer bo

Stus-List Re: Question re heater transom exhaust thru hull

We have a reverse transom too but our Espar exhaust doesn't go through the transom. It goes through the side of the hull back close to the transom. Ken H. On Tue, 4 May 2021 at 16:19, Hoyt, Mike via CnC-List wrote: > Wondering if anyone on this list has installed a forced air heater with > the

Stus-List Re: Question for the group;

I've sailed a Hobie, Tornado, and a 26 and 30 foot Wharram designed cats (no bridge accommodations). All of them were fast boats, and to some extent fun boats.  They all tacked well, the Hobie being the worst of them all, and they all felt like sailing the clubhouse.  No need for cup holders, no

Stus-List Re: Question for the group;

I totally lost interest in owning a cruising cat once I saw them picked up by hurricanes*. I have enough to worry about in storms without the added possibility of becoming a very poor aircraft that is about to suffer a likely fatal crash landing. Also it seems every year the cats mutate away fro

Stus-List Re: Question for the group;

From: CHARLES SCHEAFFER via CnC-List Sent: Monday, January 4, 2021 9:10:08 PM To: Stus-List Cc: CHARLES SCHEAFFER Subject: Stus-List Re: Question for the group; I love my C&C but if I had enough money, and my wife was into it, we'd have a really good time with a catamaran. Catamarans

Stus-List Re: Question for the group;

I love my C&C but if I had enough money, and my wife was into it, we'd have a really good time with a catamaran. Catamarans; Check out a couple of world travellers who have logged thousands of miles on multihulls before trading up to catamarans; Checkout YouTube.com "sailing la vagabonde" is a

Stus-List Re: Question for the group;

I agree with everything Joe said. We chartered a cat once in the Caribbean and never again. It was great for accommodations and deck space for toys, but completely removed the “sailing” aspect of the trip. It was like I imagine driving an RV would be. Yuck! Dave S/V Aries 1990 C&C 34+ New

Stus-List Re: Question for the group;

the washing machine…”.. That about says it all. Chuck Gilchrest S/V Half Magic 1983 35 Landfall Padnaram, MA From: Richard Bush via CnC-List Sent: Monday, January 4, 2021 3:17 PM To: cnc-list@cnc-list.com Cc: Richard Bush Subject: Stus-List Re: Question for the group; I'll star

Stus-List Re: Question for the group;

ked in light air, but we didn’t really have much light air. Joe Della Barba Coquina C&C 35 MK I Kent Island MD USA From: Richard Bush via CnC-List Sent: Monday, January 4, 2021 3:17 PM To: cnc-list@cnc-list.com Cc: Richard Bush Subject: Stus-List Re: Question for the group; I&

Stus-List Re: Question for the group;

I'll start with an apology; it's not specifically C&C related; and I have no wish to start a general debate; my question...I see lots and lots of catamaran ads and apparently Sail Magazine thinks monohulls have been mothballed...: what is the appeal of these boats I recognize their added sp