com>
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Soft thumping/banging when in gear at low-rpm?
Message-ID:
<caeeqabcr83arrzgkjur63x2d2zopqnscp5hxclspopmagsi...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
I think you should try minor adjustments 1st. Then, if you
thlink.net> >
To: <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> >
Subject: Re: Stus-List Soft thumping/banging when in gear at low-rpm?
Message-ID: <004b01d1aabc$ea4ca480$bee5ed80$@earthlink.net
<http://earthlink.net> >
Content-Type: text/plain; chars
>
>
> --
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Andrew
> Means via CnC-List
> *Sent:* May-11-16 2:56 PM
> *To:* cnc-list@cnc-list.com
> *Cc:* Andrew Means
> *Subject:* Re: Stus-List Soft thumping/banging
, ON
_
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Andrew Means
via CnC-List
Sent: May-11-16 2:56 PM
To: cnc-list@cnc-list.com
Cc: Andrew Means
Subject: Re: Stus-List Soft thumping/banging when in gear at low-rpm?
Guys this is fantastic information (and hopefully not too
orums.sailinganarchy.com/index.php?showtopic=154931
>>
>>
>>
>> Dave
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> Message: 1
>>
>> Date: Tue, 10 May 2016 09:07:32 -0400
>>
&
hotos, where you can see the various parts. You will need a gear
> puller.
>
>
>
> http://forums.sailinganarchy.com/index.php?showtopic=154931
>
>
>
> Dave
>
>
>
>
>
>
>
>
>
> Message: 1
>
> Date: Tue, 10 May 2016 09:07:32 -0400
>
> F
-0400
From: "Rick Brass" <rickbr...@earthlink.net>
To: <cnc-list@cnc-list.com>
Subject: Re: Stus-List Soft thumping/banging when in gear at low-rpm?
Message-ID: <004b01d1aabc$ea4ca480$bee5ed80$@earthlink.net>
Content-Type: text/plain; charset="utf-8"
Or this.
-list.com] On Behalf Of Brian Davis
via CnC-List
Sent: Tuesday, May 10, 2016 8:47 AM
To: cnc-list@cnc-list.com
Cc: Brian Davis <brianwdavis...@gmail.com>
Subject: Re: Stus-List Soft thumping/banging when in gear at low-rpm?
Hi Dave,
Is the lapping compound you used somethin
ked perfectly.
>> Make sure you secure the prop shaft so it can't fall out.
>>
>>
>> Dave.
>>
>> Date: Sun, 8 May 2016 15:40:53 -0700
>> From: Andrew Means <andrew.cnc...@gmail.com>
>> To: cnc-list@cnc-list.com
>> Subject: Stus-List Soft thumpi
t of the
> transmission.
> Worked perfectly.
> Make sure you secure the prop shaft so it can't fall out.
>
>
> Dave.
>
> Date: Sun, 8 May 2016 15:40:53 -0700
> From: Andrew Means <andrew.cnc...@gmail.com>
> To: cnc-list@cnc-list.com
> Subject: Stus-List Soft
it can't fall out.
Dave.
Date: Sun, 8 May 2016 15:40:53 -0700
From: Andrew Means <andrew.cnc...@gmail.com>
To: cnc-list@cnc-list.com
Subject: Stus-List Soft thumping/banging when in gear at low-rpm?
Message-ID: <etPan.572fc098.5095526e.13b@worsley.local>
Content-Type: text/plain; charset=&
, Whitby ON.
>
>
>
>
>
>
>
>
>
>
> Message: 5
> Date: Mon, 9 May 2016 09:14:46 -0700
> From: Andrew Means <andrew.cnc...@gmail.com>
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List Soft thumping/banging when in gear at low-rpm?
> Message-ID:
frequently., then will really start to slam, and could be uncooperative
when you need it most.
Dave
Windstar, 33-2, Whitby ON.
Message: 5
Date: Mon, 9 May 2016 09:14:46 -0700
From: Andrew Means <andrew.cnc...@gmail.com>
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Soft thumping/b
Sounds like it could be a transmission issue. Especially since you only
hear it in forward and not reverse. Not sure of your engine/Trans
placement, but in my Landfall 38, I have a vdrive, so the trans is right
there behind the steps and access panel. If there's a plate or cover,
remove it and
Ugh - that sounds expensive. I’ll see about holding the lever down, maybe it
just needs tensioning…
--
Andrew Means
S.V. Safari - 1977 C 34 Mk I
Seattle, WA
On May 9, 2016 at 9:12:16 AM, Derek McLeod via CnC-List (cnc-list@cnc-list.com)
wrote:
I had a similar issue with my 29mk2 with Yanmar
Landfall 38
Seattle, WA
On Mon, May 9, 2016 at 9:00 AM, <cnc-list-requ...@cnc-list.com> wrote:
> From: Andrew Means <andrew.cnc...@gmail.com>
> To: cnc-list@cnc-list.com
> Cc:
> Date: Sun, 8 May 2016 15:40:53 -0700
> Subject: Stus-List Soft thumping/banging when in gear
I had a similar issue with my 29mk2 with Yanmar 2GM. Turned out it was the
transmission slipping. I suspected my Flexofold prop at first, and eventually
discovered that pushing the shifter hard down helped, before having a mechanic
aboard who immediately recognized it as the transmission. All
Anchovy had the same symptoms three years ago...broken strut.
Rick Bushie
Anchovy, 1971 30-1
Tolchester, MD
___
This list is supported by the generous donations of our members. If you like
what we do, please help us pay for our costs by donating. All
I wonder if the prop isn't opening properly?
Andy
C 40
Peregrine
Andrew Burton
61 W Narragansett
Newport, RI
USA02840
http://sites.google.com/site/andrewburtonyachtservices/
+401 965-5260
> On May 8, 2016, at 18:40, Andrew Means via CnC-List
> wrote:
>
> Boat:
Boat: 1977 C 34
Engine: Yanmar 3GM30 (F)
Prop: 3 Blade Max Prop
Recently I noticed that when engaged in forward-drive, at low RPM, it almost
feels like something is banging against the bottom of the hull, like a piece of
kelp or rope tangled in the prop. Once the RPMs get above 1400 or so the
20 matches
Mail list logo