Re: Stus-List Standard Horizon 150 wind instrument - cable needed

2016-05-23 Thread Frederick G Street via CnC-List
The biggest issue is that the cable is probably permanently attached to the connection block at the masthead; so you’d need to splice new cable to a pigtail of the existing cable near that block. Belden 9534 would be an almost perfect replacement for the existing cable, except that the color

Re: Stus-List Standard Horizon 150 wind instrument - cable needed

2016-05-23 Thread Bill Bina - gmail via CnC-List
Sounds like how my masthead unit slowly died. It became intermittent. Brought it down and it tested fine. Put it back up and it acted up again after a short while. It was just too old. Failure of the wire is possible, but I think less likely. The wire in my mast is inside a narrow conduit. Not

Re: Stus-List Standard Horizon 150 wind instrument - cable needed

2016-05-23 Thread John Read via CnC-List
Fred Was getting erratic readings. Sent crew up mast. Removed sending unit and plugged directly to receiving unit Worked perfectly . Checked continuity from junction box to receive unit Was perfect. Only part left is masthead wire. Visual inspection of box at top where send unit plugs in

Re: Stus-List Standard Horizon 150 wind instrument - cable needed

2016-05-23 Thread Frederick G Street via CnC-List
John — where is the issue with the cable? From the masthead to the junction box; the box to the instrument; or the connector at the instrument itself? It’s a simple four-conductor with shield cable; there are generic options for you. If it’s the plug, that’s a bit more difficult. — Fred

Re: Stus-List Standard Horizon 150 wind instrument - cable needed

2016-05-23 Thread John Read via CnC-List
-Original Message- From: cnc-list@cnc-list.com To: cnc-list@cnc-list.com Cc: f...@postaudio.net Sent: 2016-05-22 20:53:28 GMT Subject: Re: Stus-List Standard Horizon 150 wind instrument - cable needed John — the manual

Re: Stus-List Standard Horizon 150 wind instrument - cable needed

2016-05-23 Thread Bill Bina - gmail via CnC-List
-List Standard Horizon 150 wind instrument - cable needed John — the manual for the 150 lists a replacement masthead cable as part M13349005A; have you checked with them? http://www.standardhorizon.com/?cmd=ContactUs=3 — Fred Fred Street -- Minneapolis S/V Oceanis (1979 C Landfall 38

Re: Stus-List Standard Horizon 150 wind instrument - cable needed

2016-05-23 Thread John Read via CnC-List
Hi Fred. Sent them an email yesterday. We shall see. Sent from XFINITY Connect Mobile App-Original Message-From: cnc-list@cnc-list.comTo: cnc-list@cnc-list.comCc: f...@postaudio.netSent: 2016-05-22 20:53:28 GMTSubject: Re: Stus-List Standard Horizon 150 wind instrument - cable neededJohn

Re: Stus-List Standard Horizon 150 wind instrument - cable needed

2016-05-22 Thread Frederick G Street via CnC-List
John — the manual for the 150 lists a replacement masthead cable as part M13349005A; have you checked with them? http://www.standardhorizon.com/?cmd=ContactUs=3 — Fred Fred Street -- Minneapolis S/V Oceanis (1979 C Landfall 38) -- on the hard in Bayfield, WI :^( > On May 22, 2016, at 4:39

Stus-List Standard Horizon 150 wind instrument - cable needed

2016-05-22 Thread John and Maryann Read via CnC-List
In need of replacement masthead cable for Standard Horizon Model 150 wind speed / direction. Anyone have one? Many thanks John and Maryann Legacy III 1982 C 34 Noank, CT --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus