I sent some phots and information to John in response to this request, but
the email was rejected by gmail with an indication the johnrogerswright
address was invalid.
John, if you are still on the list and interested in the photos and
information, email me off list and give me your current
I can't help you with the alternator issues.
Regarding LED replacement bulbs, they don't have to be expensive to be good.
But you have to do some searching around. Since you are on this side of the
border, you may like to check the marineledscanada.ca. I had good success with
his solutions
Had a 80 amp Balmar for 12 years. Buy their smart charger. Flawless
performance.
>From my Android
From: CnC-List on behalf of Dennis C. via
CnC-List
Sent: Saturday, October 13, 2018 5:46:52 PM
To: CnClist
Cc: Dennis C.
Subject: Re: Stus-List Solar
Interesting - have been contemplating exactly this for Windstar - 33-2, and my
needs and equipment are similar for contemplated summer cruising in Georgian
bay.
I have a Bimini and can barely fit 200w (iirc) of solar panel on the Bimini,
which is the bare minimum required to keep my house
Doing some work on Windstar, and while I’m at it I will probably replace the
sun-beaten original water deck fill. Any recommendations as to a high-quality
replacement?Thanks!
Dave
Sent from my iPad
___
Thanks everyone for supporting this list
> Alan,
Thank you I was afraid of that reality
Mark Watson
Trinity
C newport 41 MK 1C 1977
Sausalito, Ca___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the
No help for you on the solar panels but the ONLY LED replacement bulbs or
fixtures to buy are marinebeam.com.
I've bought a couple of LED products from other suppliers. I have replaced
them with marinebeam products.
I have both entire fixtures and also replacement bulbs from them. 1st
quality
Will do Marek!
Sent from Yahoo Mail for iPhone
On Saturday, October 13, 2018, 4:52 PM, Marek Dziedzic via CnC-List
wrote:
If you call Garhauer, talk to them about replicating your bolt pattern. That
way, you could re-use all the mounting holes.
Marek
Sent from my Samsung Galaxy
He is excellent and his gear is even better, high quality guaranteed for 10
years
Sent from my iPhone
> On Oct 13, 2018, at 1:48 PM, Doug Mountjoy via CnC-List
> wrote:
>
> Derrick,
> Call Guido at Garhauer. He will help you with finding the best traveler. I
> just had him help me with
If you call Garhauer, talk to them about replicating your bolt pattern. That
way, you could re-use all the mounting holes.
Marek
Sent from my Samsung Galaxy smartphone.
Original message
From: Sam Salter via CnC-List
Date: 2018-10-13 10:26 (GMT-05:00)
To:
My previous boat was an Ericson 2-30. It had wooden framed hatches that I
replaced with aluminum framed hatches from Bomar. The deck on the Ericson
was raised, so the mounting surface of the wooden framed hatches wasn't
curved. On your boat you would have to mount the Bomar or Harken hatches on
Ladies and gentlemen
We acquired Trinity (C newport 41 mk1 c from 1977) a little over a year ago
and love her.
Question has anybody have experience replacing the original wood framed and
plexiglass deck hatch’s with something more contemporary in aluminum. ?
Here is a link to an image
On my 27 MkIII I installed the Lewmar size 1, it uses the existing holes.
Happy with it ( but I customized it for single handling )
Sylvain
C MkIII
On Saturday, October 13, 2018, 9:14:28 AM EDT, Chris Graham via CnC-List
wrote:
I need to first replace the main traveler system. Any
Hi All
Last year after putting in a new Beta engine with a larger alternator (110 amp)
we added an additional battery, a battery monitor, and to use all that power, a
fridge. (Of interest, and not the point of this email, is we went through two
alternators on the boat last summer both on
I’m looking for the same!!!
So thanks for that :)
Sent from Yahoo Mail for iPhone
On Saturday, October 13, 2018, 12:54 PM, Doug Mountjoy via CnC-List
wrote:
Oops, It was supposed to go to Derrick.
Doug
On Sat, Oct 13, 2018 at 9:51 AM Chris Graham via CnC-List
wrote:
Not sure if
Oops, It was supposed to go to Derrick.
Doug
On Sat, Oct 13, 2018 at 9:51 AM Chris Graham via CnC-List <
cnc-list@cnc-list.com> wrote:
> Not sure if this was meant for me but I’ve worked with him before I
> believe. Love their products!
>
> Chris
> Sent from Yahoo Mail for iPhone
Not sure if this was meant for me but I’ve worked with him before I believe.
Love their products!
Chris
Sent from Yahoo Mail for iPhone
On Saturday, October 13, 2018, 12:48 PM, Doug Mountjoy via CnC-List
wrote:
Derrick,Call Guido at Garhauer. He will help you with finding the best
Derrick,
Call Guido at Garhauer. He will help you with finding the best traveler. I
just had him help me with finding a new traveler for my LF39. Plus Garhauer
will modify it to fit your boat.
Doug
>
>
>>
>>
>>
>
>
--
Douglas Mountjoy
Port Orchard YC, WA
Rebecca Leah
LF39
Sent from Yahoo Mail for iPhone
On Saturday, October 13, 2018, 11:36 AM, John Irvin via CnC-List
wrote:
Go Garhauer
Sent from my iPhone
On Oct 13, 2018, at 9:14 AM, Chris Graham via CnC-List
wrote:
I need to first replace the main traveler system. Any suggestions with a system
Go Garhauer
Sent from my iPhone
On Oct 13, 2018, at 9:14 AM, Chris Graham via CnC-List
mailto:cnc-list@cnc-list.com>> wrote:
I need to first replace the main traveler system. Any suggestions with a system
that won’t break the bank?
Chris
Sent from Yahoo Mail for
Always some on eBay.
BTW, there's a FICO car out there now for anyone with that system.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
On Sat, Oct 13, 2018 at 8:43 AM Gary Nylander via CnC-List <
cnc-list@cnc-list.com> wrote:
> Look at the selection from Garhauer. Great stuff at an attractive
Oh wow!
I’ll see if I can find that and take a look Chris
Sent from Yahoo Mail for iPhone
On Saturday, October 13, 2018, 10:25 AM, Sam Salter via CnC-List
wrote:
Not necessarily cheap, but Harken makes a track that has a longitudinal slot on
the underside. It fits the head of the
Hi Gary
I just read your reply to Chris.
I too have a 30-1, with the original traveller. One of its stops is jammed
and must be released with pliers. I'm looking to replace it and have looked
at the Garhauer catalog. What do you recommend?
Thanks
Derek
C 30 mk1 #553, Tortuga
Ballantynes Cove, NS
Not necessarily cheap, but Harken makes a track that has a longitudinal slot on
the underside. It fits the head of the installation bolts so they can slide
anywhere along the track. No filling and redrilling - they can match the
original bolt spacing - easy, quick install.
sam
On Oct 13,
Thanks Gary!
Bought their boom bang for my 28’ and loved it!!!
Chris
Sent from Yahoo Mail for iPhone
On Saturday, October 13, 2018, 9:42 AM, Gary Nylander via CnC-List
wrote:
#yiv8608864735 #yiv8608864735 -- _filtered #yiv8608864735
{font-family:Helvetica;panose-1:2 11 6 4 2 2 2 2 2 4;}
Look at the selection from Garhauer. Great stuff at an attractive price.
Gary
30-1 with a boatload of their stuff
From: CnC-List On Behalf Of Chris Graham via
CnC-List
Sent: Saturday, October 13, 2018 9:14 AM
To: cnc-list@cnc-list.com
Cc: Chris Graham
Subject: Re: Stus-List C 26' or 27'?
I need to first replace the main traveler system. Any suggestions with a system
that won’t break the bank?
Chris
Sent from Yahoo Mail for iPhone
On Friday, October 12, 2018, 10:43 PM, Sam Salter via CnC-List
wrote:
Roller furler - Profurl
sam
On Oct 12, 2018, at 5:19 PM, Chris Graham
27 matches
Mail list logo