Re: Stus-List Building a hard bimini - part 1

[Joel Aronson via CnC-List]

Should be there at the bottom.

On Sun, Apr 22, 2018 at 7:20 PM Josh Muckley via CnC-List <
cnc-list@cnc-list.com> wrote:

> Added where?  I checked the original url and only found the original
> pictures.
>
> Josh
>
> On Sun, Apr 22, 2018, 6:54 PM Joel Aronson via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> It’s done!  Photos of the finished product were added.
>>
>> Joel
>>
>> On Mon, Apr 16, 2018 at 7:34 PM <captain_j...@cox.net> wrote:
>>
>>> Looking great Joel.  The shade will be much appreciated.  And it is a
>>> great place for the solar panels.  Out of sight and out of mind.
>>>
>>>
>>>
>>> Jake
>>>
>>>
>>>
>>> *Jake Brodersen*
>>>
>>> *C 35 Mk-III “Midnight Mistress”*
>>>
>>> *Hampton VA*
>>>
>>> [image: cid:image001.png@01D2F43E.567E4070]
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> *From:* CnC-List <cnc-list-boun...@cnc-list.com> *On Behalf Of *Joel
>>> Aronson via CnC-List
>>> *Sent:* Monday, April 16, 2018 11:26
>>> *To:* cnc-list <cnc-list@cnc-list.com>
>>> *Cc:* Joel Aronson <joel.aron...@gmail.com>
>>> *Subject:* Re: Stus-List Building a hard bimini - part 1
>>>
>>>
>>>
>>> Danny,
>>>
>>>
>>>
>>> I also expect to add solar, so this made more sense than new canvas.
>>>
>>>
>>>
>>> For $300 worth of materials I took a shot!
>>>
>>>
>>>
>>> Joel
>>>
>> --
>> Joel
>> 301 541 8551
>>
> ___
>>
>> Thanks everyone for supporting this list with your contributions.  Each
>> and every one is greatly appreciated.  If you want to support the list -
>> use PayPal to send contribution --   https://www.paypal.me/stumurray
>>
>> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
> --
Joel
301 541 8551
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Building a hard bimini - part 1

[Josh Muckley via CnC-List]

Added where?  I checked the original url and only found the original
pictures.

Josh

On Sun, Apr 22, 2018, 6:54 PM Joel Aronson via CnC-List <
cnc-list@cnc-list.com> wrote:

> It’s done!  Photos of the finished product were added.
>
> Joel
>
> On Mon, Apr 16, 2018 at 7:34 PM <captain_j...@cox.net> wrote:
>
>> Looking great Joel.  The shade will be much appreciated.  And it is a
>> great place for the solar panels.  Out of sight and out of mind.
>>
>>
>>
>> Jake
>>
>>
>>
>> *Jake Brodersen*
>>
>> *C 35 Mk-III “Midnight Mistress”*
>>
>> *Hampton VA*
>>
>> [image: cid:image001.png@01D2F43E.567E4070]
>>
>>
>>
>>
>>
>>
>>
>> *From:* CnC-List <cnc-list-boun...@cnc-list.com> *On Behalf Of *Joel
>> Aronson via CnC-List
>> *Sent:* Monday, April 16, 2018 11:26
>> *To:* cnc-list <cnc-list@cnc-list.com>
>> *Cc:* Joel Aronson <joel.aron...@gmail.com>
>> *Subject:* Re: Stus-List Building a hard bimini - part 1
>>
>>
>>
>> Danny,
>>
>>
>>
>> I also expect to add solar, so this made more sense than new canvas.
>>
>>
>>
>> For $300 worth of materials I took a shot!
>>
>>
>>
>> Joel
>>
> --
> Joel
> 301 541 8551
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Building a hard bimini - part 1

[Joel Aronson via CnC-List]

It’s done!  Photos of the finished product were added.

Joel

On Mon, Apr 16, 2018 at 7:34 PM <captain_j...@cox.net> wrote:

> Looking great Joel.  The shade will be much appreciated.  And it is a
> great place for the solar panels.  Out of sight and out of mind.
>
>
>
> Jake
>
>
>
> *Jake Brodersen*
>
> *C 35 Mk-III “Midnight Mistress”*
>
> *Hampton VA*
>
> [image: cid:image001.png@01D2F43E.567E4070]
>
>
>
>
>
>
>
> *From:* CnC-List <cnc-list-boun...@cnc-list.com> *On Behalf Of *Joel
> Aronson via CnC-List
> *Sent:* Monday, April 16, 2018 11:26
> *To:* cnc-list <cnc-list@cnc-list.com>
> *Cc:* Joel Aronson <joel.aron...@gmail.com>
> *Subject:* Re: Stus-List Building a hard bimini - part 1
>
>
>
> Danny,
>
>
>
> I also expect to add solar, so this made more sense than new canvas.
>
>
>
> For $300 worth of materials I took a shot!
>
>
>
> Joel
>
-- 
Joel
301 541 8551
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Building a hard bimini - part 1

[Jake Brodersen via CnC-List]

Looking great Joel.  The shade will be much appreciated.  And it is a great 
place for the solar panels.  Out of sight and out of mind.

 

Jake

 

Jake Brodersen

C 35 Mk-III “Midnight Mistress”

Hampton VA



 

 

 

From: CnC-List <cnc-list-boun...@cnc-list.com> On Behalf Of Joel Aronson via 
CnC-List
Sent: Monday, April 16, 2018 11:26
To: cnc-list <cnc-list@cnc-list.com>
Cc: Joel Aronson <joel.aron...@gmail.com>
Subject: Re: Stus-List Building a hard bimini - part 1

 

Danny,

 

I also expect to add solar, so this made more sense than new canvas.

 

For $300 worth of materials I took a shot!

 

Joel

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Building a hard bimini - part 1

[Joel Aronson via CnC-List]

Danny,

I also expect to add solar, so this made more sense than new canvas.

For $300 worth of materials I took a shot!

Joel

On Mon, Apr 16, 2018 at 11:15 AM, Danny Haughey via CnC-List <
cnc-list@cnc-list.com> wrote:

> It makes really good sense too,  I never take my Bimini down.  I'm
> considering a solar panel install there.  I just have too many projects
> underway at the moment
>
> On 4/16/2018 9:28 AM, Joel Aronson via CnC-List wrote:
>
> Thanks!  This was way beyond any project I had tackled.
>
> Joel
>
> On Mon, Apr 16, 2018 at 8:52 AM, Danny Haughey via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> looking really good Joel!
>>
>> On 4/16/2018 8:51 AM, Joel Aronson via CnC-List wrote:
>>
>> The hard bimini is almost done!  Did the test fit Saturday, marked the
>> corners, but the curves, filled the edges.  Final sanding, and painting,
>> hopefully this week.
>>
>> Photos are on the link:
>> https://drive.google.com/drive/folders/1jQwPE06SOaWaLx-EAU-y
>> QpnJv5BP0UwU?usp=sharing
>>
>> Joel
>>
>> On Wed, Apr 11, 2018 at 3:53 PM, Joel Aronson via CnC-List <
>> cnc-list@cnc-list.com> wrote:
>>
>>> I started building the hard bimini with the FRP panels from Home Depot
>>> after speaking to the guys at Jamestown Distributors.
>>>
>>> Day 1
>>>
>>> assembled the bits - MAS epoxy, 2x6s sheet of plywood, foam core, glass
>>> cloth,  and 2 4x8 sheets of FRP panel from Home Depot to use as skins.
>>>
>>> Took a 2x6 to the boat and clamped it to the existing frame and marked
>>> the curve. Realized that a 2x6 was not wide enough.
>>> Cut the 2x6, screwed 'extensions' on the end so they were 2x12, clamped
>>> it to the rail. Cut the rest of the curve. Verified that the 2 bows had the
>>> same curve and repeated the process.
>>>
>>> Then came the evil FRP. It has a bubble finish on one side that needed
>>> to be sanded. This stuff is hard as a rock and creates a fine white powder
>>> that goes everywhere. You MUST wear a mask! It also consumes sandpaper. I
>>> got frustrated with 80 grit, so tried 60. 80 was marginally better. Did the
>>> sanding on the garage floor. Spent more time on my knees than a cheap
>>> hooker.
>>>
>>> Set aside the FRP and screwed the sheet of plywood to the 2x6s to get
>>> the shape.
>>>
>>> Realized I was short of foam, so I cut about a 48 x 5 inch piece of 1/4
>>> inch PVC sheet.  MAS sticks to PVC, unlike West.
>>>
>>>
>>>
>>> Day 2 - part 1. Trimmed the excess off to get the size to its proper
>>> size 48 by 76.
>>> Cut G10 into squares for the attachment points as recommended by
>>> Jamestown distributors.
>>> Cut holed in the foam core sheets for the G10 to fit in. Measured
>>> distance from the edges.
>>>
>>> Did the layup of bottom FRP panel, glass cloth and foam.  Epoxied in the
>>> G10.
>>>
>>> Will add more epoxy, cloth and the top FRP panel tomorrow night.
>>>
>>> Right now it is fairly flexible.  I'm hoping it stiffens as I go.  The
>>> good news is that if my measurements are slightly off it won't matter.
>>>
>>> Photos of intial work:
>>> https://drive.google.com/drive/folders/1jQwPE06SOaWaLx-EAU-y
>>> QpnJv5BP0UwU?usp=sharing
>>>
>>> --
>>> Joel
>>> 301 541 8551
>>>
>>> ___
>>>
>>> Thanks everyone for supporting this list with your contributions.  Each
>>> and every one is greatly appreciated.  If you want to support the list -
>>> use PayPal to send contribution --   https://www.paypal.me/stumurray
>>>
>>>
>>>
>>
>>
>> --
>> Joel
>> 301 541 8551
>>
>>
>> ___
>>
>> Thanks everyone for supporting this list with your contributions.  Each and 
>> every one is greatly appreciated.  If you want to support the list - use 
>> PayPal to send contribution --   https://www.paypal.me/stumurray
>>
>>
>>
>> ___
>>
>> Thanks everyone for supporting this list with your contributions.  Each
>> and every one is greatly appreciated.  If you want to support the list -
>> use PayPal to send contribution --   https://www.paypal.me/stumurray
>>
>>
>>
>
>
> --
> Joel
> 301 541 8551
>
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
>


-- 
Joel
301 541 8551
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Building a hard bimini - part 1

[Danny Haughey via CnC-List]

It makes really good sense too,  I never take my Bimini down. I'm 
considering a solar panel install there.  I just have too many projects 
underway at the moment



On 4/16/2018 9:28 AM, Joel Aronson via CnC-List wrote:

Thanks!  This was way beyond any project I had tackled.

Joel

On Mon, Apr 16, 2018 at 8:52 AM, Danny Haughey via CnC-List 
> wrote:


looking really good Joel!


On 4/16/2018 8:51 AM, Joel Aronson via CnC-List wrote:

The hard bimini is almost done!  Did the test fit Saturday,
marked the corners, but the curves, filled the edges.  Final
sanding, and painting, hopefully this week.

Photos are on the link:

https://drive.google.com/drive/folders/1jQwPE06SOaWaLx-EAU-yQpnJv5BP0UwU?usp=sharing




Joel

On Wed, Apr 11, 2018 at 3:53 PM, Joel Aronson via CnC-List
> wrote:

I started building the hard bimini with the FRP panels from
Home Depot after speaking to the guys at Jamestown Distributors.

Day 1

assembled the bits - MAS epoxy, 2x6s sheet of plywood, foam
core, glass cloth,  and 2 4x8 sheets of FRP panel from Home
Depot to use as skins.

Took a 2x6 to the boat and clamped it to the existing frame
and marked the curve. Realized that a 2x6 was not wide enough.
Cut the 2x6, screwed 'extensions' on the end so they were
2x12, clamped it to the rail. Cut the rest of the curve.
Verified that the 2 bows had the same curve and repeated the
process.

Then came the evil FRP. It has a bubble finish on one side
that needed to be sanded. This stuff is hard as a rock and
creates a fine white powder that goes everywhere. You MUST
wear a mask! It also consumes sandpaper. I got frustrated
with 80 grit, so tried 60. 80 was marginally better. Did the
sanding on the garage floor. Spent more time on my knees than
a cheap hooker.

Set aside the FRP and screwed the sheet of plywood to the
2x6s to get the shape.

Realized I was short of foam, so I cut about a 48 x 5 inch
piece of 1/4 inch PVC sheet.  MAS sticks to PVC, unlike West.



Day 2 - part 1. Trimmed the excess off to get the size to its
proper size 48 by 76.
Cut G10 into squares for the attachment points as recommended
by Jamestown distributors.
Cut holed in the foam core sheets for the G10 to fit in.
Measured distance from the edges.

Did the layup of bottom FRP panel, glass cloth and foam. 
Epoxied in the G10.

Will add more epoxy, cloth and the top FRP panel tomorrow night.

Right now it is fairly flexible.  I'm hoping it stiffens as I
go.  The good news is that if my measurements are slightly
off it won't matter.

Photos of intial work:

https://drive.google.com/drive/folders/1jQwPE06SOaWaLx-EAU-yQpnJv5BP0UwU?usp=sharing



-- 
Joel

301 541 8551

___

Thanks everyone for supporting this list with your
contributions.  Each and every one is greatly appreciated. 
If you want to support the list - use PayPal to send
contribution -- https://www.paypal.me/stumurray






-- 
Joel

301 541 8551


___

Thanks everyone for supporting this list with your contributions.  Each and every 
one is greatly appreciated.  If you want to support the list - use PayPal to send 
contribution --https://www.paypal.me/stumurray 




___

Thanks everyone for supporting this list with your contributions. 
Each and every one is greatly appreciated. If you want to support
the list - use PayPal to send contribution --
https://www.paypal.me/stumurray 





--
Joel
301 541 8551


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Building a hard bimini - part 1

[Joel Aronson via CnC-List]

Thanks!  This was way beyond any project I had tackled.

Joel

On Mon, Apr 16, 2018 at 8:52 AM, Danny Haughey via CnC-List <
cnc-list@cnc-list.com> wrote:

> looking really good Joel!
>
> On 4/16/2018 8:51 AM, Joel Aronson via CnC-List wrote:
>
> The hard bimini is almost done!  Did the test fit Saturday, marked the
> corners, but the curves, filled the edges.  Final sanding, and painting,
> hopefully this week.
>
> Photos are on the link:
> https://drive.google.com/drive/folders/1jQwPE06SOaWaLx-EAU-
> yQpnJv5BP0UwU?usp=sharing
>
> Joel
>
> On Wed, Apr 11, 2018 at 3:53 PM, Joel Aronson via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> I started building the hard bimini with the FRP panels from Home Depot
>> after speaking to the guys at Jamestown Distributors.
>>
>> Day 1
>>
>> assembled the bits - MAS epoxy, 2x6s sheet of plywood, foam core, glass
>> cloth,  and 2 4x8 sheets of FRP panel from Home Depot to use as skins.
>>
>> Took a 2x6 to the boat and clamped it to the existing frame and marked
>> the curve. Realized that a 2x6 was not wide enough.
>> Cut the 2x6, screwed 'extensions' on the end so they were 2x12, clamped
>> it to the rail. Cut the rest of the curve. Verified that the 2 bows had the
>> same curve and repeated the process.
>>
>> Then came the evil FRP. It has a bubble finish on one side that needed to
>> be sanded. This stuff is hard as a rock and creates a fine white powder
>> that goes everywhere. You MUST wear a mask! It also consumes sandpaper. I
>> got frustrated with 80 grit, so tried 60. 80 was marginally better. Did the
>> sanding on the garage floor. Spent more time on my knees than a cheap
>> hooker.
>>
>> Set aside the FRP and screwed the sheet of plywood to the 2x6s to get the
>> shape.
>>
>> Realized I was short of foam, so I cut about a 48 x 5 inch piece of 1/4
>> inch PVC sheet.  MAS sticks to PVC, unlike West.
>>
>>
>>
>> Day 2 - part 1. Trimmed the excess off to get the size to its proper size
>> 48 by 76.
>> Cut G10 into squares for the attachment points as recommended by
>> Jamestown distributors.
>> Cut holed in the foam core sheets for the G10 to fit in. Measured
>> distance from the edges.
>>
>> Did the layup of bottom FRP panel, glass cloth and foam.  Epoxied in the
>> G10.
>>
>> Will add more epoxy, cloth and the top FRP panel tomorrow night.
>>
>> Right now it is fairly flexible.  I'm hoping it stiffens as I go.  The
>> good news is that if my measurements are slightly off it won't matter.
>>
>> Photos of intial work:
>> https://drive.google.com/drive/folders/1jQwPE06SOaWaLx-EAU-
>> yQpnJv5BP0UwU?usp=sharing
>>
>> --
>> Joel
>> 301 541 8551
>>
>> ___
>>
>> Thanks everyone for supporting this list with your contributions.  Each
>> and every one is greatly appreciated.  If you want to support the list -
>> use PayPal to send contribution --   https://www.paypal.me/stumurray
>>
>>
>>
>
>
> --
> Joel
> 301 541 8551
>
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
>


-- 
Joel
301 541 8551
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Building a hard bimini - part 1

[Danny Haughey via CnC-List]

looking really good Joel!


On 4/16/2018 8:51 AM, Joel Aronson via CnC-List wrote:
The hard bimini is almost done!  Did the test fit Saturday, marked the 
corners, but the curves, filled the edges. Final sanding, and 
painting, hopefully this week.


Photos are on the link:
https://drive.google.com/drive/folders/1jQwPE06SOaWaLx-EAU-yQpnJv5BP0UwU?usp=sharing 
 



Joel

On Wed, Apr 11, 2018 at 3:53 PM, Joel Aronson via CnC-List 
> wrote:


I started building the hard bimini with the FRP panels from Home
Depot after speaking to the guys at Jamestown Distributors.

Day 1

assembled the bits - MAS epoxy, 2x6s sheet of plywood, foam core,
glass cloth,  and 2 4x8 sheets of FRP panel from Home Depot to use
as skins.

Took a 2x6 to the boat and clamped it to the existing frame and
marked the curve. Realized that a 2x6 was not wide enough.
Cut the 2x6, screwed 'extensions' on the end so they were 2x12,
clamped it to the rail. Cut the rest of the curve. Verified that
the 2 bows had the same curve and repeated the process.

Then came the evil FRP. It has a bubble finish on one side that
needed to be sanded. This stuff is hard as a rock and creates a
fine white powder that goes everywhere. You MUST wear a mask! It
also consumes sandpaper. I got frustrated with 80 grit, so tried
60. 80 was marginally better. Did the sanding on the garage floor.
Spent more time on my knees than a cheap hooker.

Set aside the FRP and screwed the sheet of plywood to the 2x6s to
get the shape.

Realized I was short of foam, so I cut about a 48 x 5 inch piece
of 1/4 inch PVC sheet.  MAS sticks to PVC, unlike West.



Day 2 - part 1. Trimmed the excess off to get the size to its
proper size 48 by 76.
Cut G10 into squares for the attachment points as recommended by
Jamestown distributors.
Cut holed in the foam core sheets for the G10 to fit in. Measured
distance from the edges.

Did the layup of bottom FRP panel, glass cloth and foam.  Epoxied
in the G10.

Will add more epoxy, cloth and the top FRP panel tomorrow night.

Right now it is fairly flexible.  I'm hoping it stiffens as I go. 
The good news is that if my measurements are slightly off it won't
matter.

Photos of intial work:

https://drive.google.com/drive/folders/1jQwPE06SOaWaLx-EAU-yQpnJv5BP0UwU?usp=sharing



-- 
Joel

301 541 8551

___

Thanks everyone for supporting this list with your contributions. 
Each and every one is greatly appreciated. If you want to support
the list - use PayPal to send contribution --
https://www.paypal.me/stumurray 





--
Joel
301 541 8551


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Building a hard bimini - part 1

[Joel Aronson via CnC-List]

The hard bimini is almost done!  Did the test fit Saturday, marked the
corners, but the curves, filled the edges.  Final sanding, and painting,
hopefully this week.

Photos are on the link:
https://drive.google.com/drive/folders/1jQwPE06SOaWaLx-
EAU-yQpnJv5BP0UwU?usp=sharing

Joel

On Wed, Apr 11, 2018 at 3:53 PM, Joel Aronson via CnC-List <
cnc-list@cnc-list.com> wrote:

> I started building the hard bimini with the FRP panels from Home Depot
> after speaking to the guys at Jamestown Distributors.
>
> Day 1
>
> assembled the bits - MAS epoxy, 2x6s sheet of plywood, foam core, glass
> cloth,  and 2 4x8 sheets of FRP panel from Home Depot to use as skins.
>
> Took a 2x6 to the boat and clamped it to the existing frame and marked the
> curve. Realized that a 2x6 was not wide enough.
> Cut the 2x6, screwed 'extensions' on the end so they were 2x12, clamped it
> to the rail. Cut the rest of the curve. Verified that the 2 bows had the
> same curve and repeated the process.
>
> Then came the evil FRP. It has a bubble finish on one side that needed to
> be sanded. This stuff is hard as a rock and creates a fine white powder
> that goes everywhere. You MUST wear a mask! It also consumes sandpaper. I
> got frustrated with 80 grit, so tried 60. 80 was marginally better. Did the
> sanding on the garage floor. Spent more time on my knees than a cheap
> hooker.
>
> Set aside the FRP and screwed the sheet of plywood to the 2x6s to get the
> shape.
>
> Realized I was short of foam, so I cut about a 48 x 5 inch piece of 1/4
> inch PVC sheet.  MAS sticks to PVC, unlike West.
>
>
>
> Day 2 - part 1. Trimmed the excess off to get the size to its proper size
> 48 by 76.
> Cut G10 into squares for the attachment points as recommended by Jamestown
> distributors.
> Cut holed in the foam core sheets for the G10 to fit in. Measured distance
> from the edges.
>
> Did the layup of bottom FRP panel, glass cloth and foam.  Epoxied in the
> G10.
>
> Will add more epoxy, cloth and the top FRP panel tomorrow night.
>
> Right now it is fairly flexible.  I'm hoping it stiffens as I go.  The
> good news is that if my measurements are slightly off it won't matter.
>
> Photos of intial work:
> https://drive.google.com/drive/folders/1jQwPE06SOaWaLx-
> EAU-yQpnJv5BP0UwU?usp=sharing
>
> --
> Joel
> 301 541 8551
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
>


-- 
Joel
301 541 8551
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Building a hard bimini - part 1

[Chuck S via CnC-List]

Looks good so far. Can't wait to see the final


> On April 11, 2018 at 3:53 PM Joel Aronson via CnC-List 
>  wrote:
> 
> I started building the hard bimini with the FRP panels from Home Depot 
> after speaking to the guys at Jamestown Distributors.
> 
> Day 1
> 
> assembled the bits - MAS epoxy, 2x6s sheet of plywood, foam core, glass 
> cloth,  and 2 4x8 sheets of FRP panel from Home Depot to use as skins.
> 
> Took a 2x6 to the boat and clamped it to the existing frame and marked 
> the curve. Realized that a 2x6 was not wide enough.
> Cut the 2x6, screwed 'extensions' on the end so they were 2x12, clamped 
> it to the rail. Cut the rest of the curve. Verified that the 2 bows had the 
> same curve and repeated the process.
> 
> Then came the evil FRP. It has a bubble finish on one side that needed to 
> be sanded. This stuff is hard as a rock and creates a fine white powder that 
> goes everywhere. You MUST wear a mask! It also consumes sandpaper. I got 
> frustrated with 80 grit, so tried 60. 80 was marginally better. Did the 
> sanding on the garage floor. Spent more time on my knees than a cheap hooker.
> 
> Set aside the FRP and screwed the sheet of plywood to the 2x6s to get the 
> shape.
> 
> Realized I was short of foam, so I cut about a 48 x 5 inch piece of 1/4 
> inch PVC sheet.  MAS sticks to PVC, unlike West.
> 
> 
> 
> Day 2 - part 1. Trimmed the excess off to get the size to its proper size 
> 48 by 76.
> Cut G10 into squares for the attachment points as recommended by 
> Jamestown distributors.
> Cut holed in the foam core sheets for the G10 to fit in. Measured 
> distance from the edges.
> 
> Did the layup of bottom FRP panel, glass cloth and foam.  Epoxied in the 
> G10.
> 
> Will add more epoxy, cloth and the top FRP panel tomorrow night.  
> 
> Right now it is fairly flexible.  I'm hoping it stiffens as I go.  The 
> good news is that if my measurements are slightly off it won't matter.
> 
> Photos of intial work:
> 
> https://drive.google.com/drive/folders/1jQwPE06SOaWaLx-EAU-yQpnJv5BP0UwU?usp=sharing
> 
> --
> Joel
> 301 541 8551
> ___
> 
> Thanks everyone for supporting this list with your contributions. Each 
> and every one is greatly appreciated. If you want to support the list - use 
> PayPal to send contribution -- https://www.paypal.me/stumurray
> 
> 
 
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray