Re: Stus-List Harken original roller furler parts

[T power via CnC-List]

Hi Matthew,


I would be interested in the jib feeder.


Cheers,


Tom Power<http://aka.ms/weboutlook>
Invictus
C&C 30 MK1
Fredericton, NB

From: CnC-List  on behalf of Matthew L. Wolford 
via CnC-List 
Sent: Friday, May 18, 2018 12:08:54 AM
To: cnc-list@cnc-list.com
Cc: Matthew L. Wolford
Subject: Re: Stus-List Harken original roller furler parts

All:

So far I have about three or four requests for mostly screws from my old 
roller furler.  I will review the e-mail notes sometime next week, compare 
requests against what I have, and let you know if I think I can help.  That 
said, I reiterate that I no longer have the headstay foil.  It was cut up and 
recycled.  I now wish that I had saved the cut pieces until after I sent my 
initial e-mail, but I incorrectly assumed that the old foil pieces would have 
little value and not worth the time to deconstruct.  My bad – sorry.

 Matt

From: Garry Cross via CnC-List<mailto:cnc-list@cnc-list.com>
Sent: Thursday, May 17, 2018 10:42 PM
To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>
Cc: Garry Cross<mailto:garr...@gmail.com>
Subject: Re: Stus-List Harken original roller furler parts

Mathew I have Series 1. The foil connectors have roll pins. If yours is the 
same, I need one as I broke one removing the mast.

Thanks.

- Forwarded message --
From: "Matthew L. Wolford" mailto:wolf...@erie.net>>
To: mailto:cnc-list@cnc-list.com>>
Cc:
Bcc:
Date: Tue, 15 May 2018 13:42:09 -0400
Subject: Stus-List Harken original roller furler parts
Listers:

Due to the inability to replace a broken torque tube, I am upgrading
from a Harken original roller furler (1980s vintage MK 1, but not called
that), Unit 2, to the newer Harken model.  The new one is nearly finished,
and I cut up/recycled the old foils.  Before I recycle the rest of the old
parts, does anyone have an interest in them (aside from the broken torque
tube)?  Please advise if you do.  Thanks.

Matt Wolford
C&C 42 Custom


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Harken original roller furler parts

[Hoyt, Mike via CnC-List]

Hi Matthew

I would suggest that you hold on to the feeder and possibly the drum and 
turnbuckles.  Foils are easily sourced but many of those parts are no longer 
manufactured and are very difficult to find.  I know that I personally have to 
lower the collar below the feeder when racing and then raise it above when not 
racing and every time I do I am afraid that I will drop the feeder overboard.  
I actually did find a spare at one time and have it in my ships stores for when 
I eventually do drop it.

Hanging on to these pieces is of little use to you but a great service to our 
extended sailing community.

Mike
Persistence
Halifax

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Matthew L. 
Wolford via CnC-List
Sent: Friday, May 18, 2018 12:09 AM
To: cnc-list@cnc-list.com
Cc: Matthew L. Wolford
Subject: Re: Stus-List Harken original roller furler parts

All:

So far I have about three or four requests for mostly screws from my old 
roller furler.  I will review the e-mail notes sometime next week, compare 
requests against what I have, and let you know if I think I can help.  That 
said, I reiterate that I no longer have the headstay foil.  It was cut up and 
recycled.  I now wish that I had saved the cut pieces until after I sent my 
initial e-mail, but I incorrectly assumed that the old foil pieces would have 
little value and not worth the time to deconstruct.  My bad – sorry.

 Matt

From: Garry Cross via CnC-List<mailto:cnc-list@cnc-list.com>
Sent: Thursday, May 17, 2018 10:42 PM
To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>
Cc: Garry Cross<mailto:garr...@gmail.com>
Subject: Re: Stus-List Harken original roller furler parts

Mathew I have Series 1. The foil connectors have roll pins. If yours is the 
same, I need one as I broke one removing the mast.

Thanks.

- Forwarded message --
From: "Matthew L. Wolford" mailto:wolf...@erie.net>>
To: mailto:cnc-list@cnc-list.com>>
Cc:
Bcc:
Date: Tue, 15 May 2018 13:42:09 -0400
Subject: Stus-List Harken original roller furler parts
Listers:

Due to the inability to replace a broken torque tube, I am upgrading
from a Harken original roller furler (1980s vintage MK 1, but not called
that), Unit 2, to the newer Harken model.  The new one is nearly finished,
and I cut up/recycled the old foils.  Before I recycle the rest of the old
parts, does anyone have an interest in them (aside from the broken torque
tube)?  Please advise if you do.  Thanks.

Matt Wolford
C&C 42 Custom

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Harken original roller furler parts

[Matthew L. Wolford via CnC-List]

All:

So far I have about three or four requests for mostly screws from my old 
roller furler.  I will review the e-mail notes sometime next week, compare 
requests against what I have, and let you know if I think I can help.  That 
said, I reiterate that I no longer have the headstay foil.  It was cut up and 
recycled.  I now wish that I had saved the cut pieces until after I sent my 
initial e-mail, but I incorrectly assumed that the old foil pieces would have 
little value and not worth the time to deconstruct.  My bad – sorry.

 Matt   

From: Garry Cross via CnC-List 
Sent: Thursday, May 17, 2018 10:42 PM
To: cnc-list@cnc-list.com 
Cc: Garry Cross 
Subject: Re: Stus-List Harken original roller furler parts

Mathew I have Series 1. The foil connectors have roll pins. If yours is the 
same, I need one as I broke one removing the mast. 


Thanks.



- Forwarded message --
From: "Matthew L. Wolford" 
To: 
Cc: 
Bcc: 
Date: Tue, 15 May 2018 13:42:09 -0400
Subject: Stus-List Harken original roller furler parts
Listers:

Due to the inability to replace a broken torque tube, I am upgrading 
from a Harken original roller furler (1980s vintage MK 1, but not called 
that), Unit 2, to the newer Harken model.  The new one is nearly finished, 
and I cut up/recycled the old foils.  Before I recycle the rest of the old 
parts, does anyone have an interest in them (aside from the broken torque 
tube)?  Please advise if you do.  Thanks.

Matt Wolford
C&C 42 Custom 



___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Harken original roller furler parts

[Garry Cross via CnC-List]

Mathew I have Series 1. The foil connectors have roll pins. If yours is the
same, I need one as I broke one removing the mast.

Thanks.

- Forwarded message --
From: "Matthew L. Wolford" 
To: 
Cc:
Bcc:
Date: Tue, 15 May 2018 13:42:09 -0400
Subject: Stus-List Harken original roller furler parts
Listers:

Due to the inability to replace a broken torque tube, I am upgrading
from a Harken original roller furler (1980s vintage MK 1, but not called
that), Unit 2, to the newer Harken model.  The new one is nearly finished,
and I cut up/recycled the old foils.  Before I recycle the rest of the old
parts, does anyone have an interest in them (aside from the broken torque
tube)?  Please advise if you do.  Thanks.

Matt Wolford
C&C 42 Custom
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Harken original roller furler parts

[T power via CnC-List]

I'm missing the jib feeder on my Fuler, I would be interested in that for sure


Tom Power
Invictus
C&C 30 MK1
Fredericton, NB

From: CnC-List  on behalf of Matthew L. Wolford 
via CnC-List 
Sent: Tuesday, May 15, 2018 2:42:09 PM
To: cnc-list@cnc-list.com
Cc: Matthew L. Wolford
Subject: Stus-List Harken original roller furler parts

Listers:

Due to the inability to replace a broken torque tube, I am upgrading
from a Harken original roller furler (1980s vintage MK 1, but not called
that), Unit 2, to the newer Harken model.  The new one is nearly finished,
and I cut up/recycled the old foils.  Before I recycle the rest of the old
parts, does anyone have an interest in them (aside from the broken torque
tube)?  Please advise if you do.  Thanks.

Matt Wolford
C&C 42 Custom


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Harken original roller furler parts

[svrebeccaleah via CnC-List]

Thanks for the offer but all I need is the foil screws. I hope. Pulling my mast 
in July. 


Doug Mountjoy Rebecca Leah LF39 POYC, WA.


 Original message From: "Matthew L. Wolford via CnC-List" 
 Date: 5/15/18  18:43  (GMT-08:00) To: 
cnc-list@cnc-list.com Cc: "Matthew L. Wolford"  Subject: Re: 
Stus-List Harken original roller furler parts 



Screws.  I should have asked sooner – as I said, I already cut up and 
recycled the foils.  I did not think to remove the screws first (which were 
secured with red Loctite).  Sorry.
 
With the exception of the foil pieces, I do have the other various 
screws.  Does that help?


 

From: svrebeccaleah via CnC-List 
Sent: Tuesday, May 15, 2018 7:40 PM
To: cnc-list@cnc-list.com 
Cc: svrebeccaleah 
Subject: Re: Stus-List Harken original roller furler 
parts
 

Matt, were your foils aka torque tube connections secures with rivets or 
screws? I need 6 screws for my old harken furler. 
 
 
 
 

Doug Mountjoy 
Rebecca Leah 
LF39 
POYC, WA.
 
 
 

 Original message 
From: "Matthew L. Wolford via CnC-List"  

Date: 5/15/18 10:42 (GMT-08:00) 
To: cnc-list@cnc-list.com 
Cc: "Matthew L. Wolford"  
Subject: Stus-List Harken original roller furler parts 
 Listers:

    Due to the inability 
to replace a broken torque tube, I am upgrading 
from a Harken original 
roller furler (1980s vintage MK 1, but not called 
that), Unit 2, to the 
newer Harken model.  The new one is nearly finished, 
and I cut 
up/recycled the old foils.  Before I recycle the rest of the old 
parts, 
does anyone have an interest in them (aside from the broken torque 

tube)?  Please advise if you do.  Thanks.

Matt 
Wolford
C&C 42 Custom 



___

Thanks 
everyone for supporting this list with your contributions.  Each and every 
one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray




___

Thanks everyone for 
supporting this list with your contributions.  Each and every one is 
greatly appreciated.  If you want to support the list - use PayPal to send 
contribution --   
https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Harken original roller furler parts

[Matthew L. Wolford via CnC-List]

Screws.  I should have asked sooner – as I said, I already cut up and recycled 
the foils.  I did not think to remove the screws first (which were secured with 
red Loctite).  Sorry.

With the exception of the foil pieces, I do have the other various screws.  
Does that help?

From: svrebeccaleah via CnC-List 
Sent: Tuesday, May 15, 2018 7:40 PM
To: cnc-list@cnc-list.com 
Cc: svrebeccaleah 
Subject: Re: Stus-List Harken original roller furler parts

Matt, were your foils aka torque tube connections secures with rivets or 
screws? I need 6 screws for my old harken furler. 




Doug Mountjoy 
Rebecca Leah 
LF39 
POYC, WA.



 Original message 
From: "Matthew L. Wolford via CnC-List"  
Date: 5/15/18 10:42 (GMT-08:00) 
To: cnc-list@cnc-list.com 
Cc: "Matthew L. Wolford"  
Subject: Stus-List Harken original roller furler parts 

Listers:

Due to the inability to replace a broken torque tube, I am upgrading 
from a Harken original roller furler (1980s vintage MK 1, but not called 
that), Unit 2, to the newer Harken model.  The new one is nearly finished, 
and I cut up/recycled the old foils.  Before I recycle the rest of the old 
parts, does anyone have an interest in them (aside from the broken torque 
tube)?  Please advise if you do.  Thanks.

Matt Wolford
C&C 42 Custom 


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray





___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Harken original roller furler parts

[svrebeccaleah via CnC-List]

Matt, were your foils aka torque tube connections secures with rivets or 
screws? I need 6 screws for my old harken furler. 



Doug Mountjoy Rebecca Leah LF39 POYC, WA.


 Original message From: "Matthew L. Wolford via CnC-List" 
 Date: 5/15/18  10:42  (GMT-08:00) To: 
cnc-list@cnc-list.com Cc: "Matthew L. Wolford"  Subject: 
Stus-List Harken original roller furler parts 
Listers:

    Due to the inability to replace a broken torque tube, I am upgrading 
from a Harken original roller furler (1980s vintage MK 1, but not called 
that), Unit 2, to the newer Harken model.  The new one is nearly finished, 
and I cut up/recycled the old foils.  Before I recycle the rest of the old 
parts, does anyone have an interest in them (aside from the broken torque 
tube)?  Please advise if you do.  Thanks.

Matt Wolford
C&C 42 Custom 


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray