Hi,
I am running the kernel from yesterday
(uImage-2.6.24+git20080424-om-gta02.bin). Is the fix included in it or do I
have to do anything else to get the software fix?
Katrin
--
View this message in context:
http://n2.nabble.com/GPS-problems%2C-summary-tp532037p581965.html
Sent from the
0n Tue, Jul 22, 2008 at 12:27:20PM +1000, Lorn Potter wrote:
Yes. both work fine. Qtopia is developed here in Brisbane. :)
heh, well I'll be dam'd.
-aW
IMPORTANT: This email remains the property of the Australian Defence
Organisation and is subject to the jurisdiction of section 70
I will reply over the weekend.
-Sean
Yorick Moko wrote:
the unabomber would know what to do! :)
No, seriously: enough openmoko-members read these mails.
It seems unimaginable that none of the design team has seen this
thread. It's about time they spoke up or that someone at
Just thought I would add another voice of support for TrueBox, excellent
service!
One point to note is that they aren't too happy about shipping to an
alternative address, for fraud prevention reasons. I did managed to persuade
them to ship to my work place after a couple of exchanges. I am sick
Bug opened
http://www.trolltech.com/developer/task-tracker
bug n° 220697
On Wed, Jul 23, 2008 at 16:44, Cédric Berger [EMAIL PROTECTED] wrote:
When I try in the settings-Call Networks to Select operator, it
fails (Failed to register to the selected network operator).
Same error when I
it is included
On Fri, Jul 25, 2008 at 7:58 AM, Katrin Tomanek [EMAIL PROTECTED] wrote:
Hi,
I am running the kernel from yesterday
(uImage-2.6.24+git20080424-om-gta02.bin). Is the fix included in it or do I
have to do anything else to get the software fix?
Katrin
--
View this message
are you sure the ASU is fast?
maybe it's because i'm running it from SD, but the ASU is everything
but fast here. There is even a slight delay when typing in numbers in
the dialer...
Qtopia seemed far more faster to me.
On Thu, Jul 24, 2008 at 10:50 PM, Ken Restivo [EMAIL PROTECTED] wrote:
On
If you are running Ubuntu you could try out:
http://andreasdalsgaard.blogspot.com/2008/07/openmoko-development-in-5-minutes.html
If you experience any problems please drop me a mail.
2008/7/24 Brian C [EMAIL PROTECTED]:
Marek Lindner wrote:
Hi,
since it seems to be extremely difficult to
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| I've upgraded to the current kernel. TTFF-issue is solved by the last
| kernel-patch. Congratulations!
|
| Now I'm testing the inteferences while accessing data from the sd-card.
| On the current default
Hi raster,
If this fork of this is how Carlsten and many others here thinks ilumme
has to be ever is created count with a tester/user/brerly developer.
I like ASU a lot but this fuzzy, not argued nor defended design
desitions made for people that prefer to not to discuss it in public is
a little
So, I have to live with the fact that OM2007.2 is very slow? Or is there
anything I can do about it (in terms of configuration).
please, elaborate your definition/experience of slow.
the worst in terms of slow i experience is either shortly after a resume
or that sometimes one needs to tap
slow = framerate is set at 10fps, and when opening the configuration
tab screen gets all jittery, you kow, like someone copy-pasted
the same text over and over again, but each time a few pixels more to
the bottom of the screen. Another example I already stated, when
dialing a number, there is
slow = framerate is set at 10fps, and when opening the configuration
tab screen gets all jittery, you kow, like someone copy-pasted
i had that experience once after playing around w/ mplayer.
I am hower running an from the sd card
would think it possible that, because sd card is
i got a 4 gig card too (can't say if from intenso, have to check the
wrapping).
my card's boot sector is not erased but -- after a resume the card is
mounted wrongly!
fstab says as mountpoint /media/card and after booting that's where the
card is.
after suspend/resume the card (often) is
On Fri, Jul 25, 2008 at 10:47 AM, arne anka [EMAIL PROTECTED] wrote:
slow = framerate is set at 10fps, and when opening the configuration
tab screen gets all jittery, you kow, like someone copy-pasted
i had that experience once after playing around w/ mplayer.
I am hower running an from
On Friday 25 July 2008, Carsten Haitzler wrote:
What about checking hal at startup (then subsequently monitoring hal
events) to see if a device with input.keyboard in its
info.capabilities list exists or is added/removed?
I'm planning on getting a USB keyboard (a frogpad) to use with
Hello,
On Thu, Jul 24, 2008 at 8:00 PM, Michael Sheldon [EMAIL PROTECTED] wrote:
It was the mention on the bug report Jeff linked to in the ASU
keyboard thread that we should be using the packages from
downloads.openmoko.org that put me on the right track, after that it was
just a matter of
Hello,
On Thu, Jul 24, 2008 at 7:54 PM, Michael Sheldon [EMAIL PROTECTED] wrote:
simarillion wrote:
Thank you,
it works fine, but how can I switch to the full keyboard which has not only
the letters? Do I need an additional package?
Drag your finger upwards (or downwards) and you'll cycle
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| i got a 4 gig card too (can't say if from intenso, have to check the
| wrapping).
| my card's boot sector is not erased but -- after a resume the card is
| mounted wrongly!
|
| fstab says as mountpoint
Hello,
On Fri, Jul 25, 2008 at 4:01 AM, Christopher White [EMAIL PROTECTED] wrote:
It's not necessary in ASU.
I disagree - gpsd or somethin like it is required no matter which
package you run on your FreeRunner.
Why? So that several applications cn get the gps data at the same time.
The
This is definitely the signature of the old MMC resume problems, not
anything else.
oh, ok. thought it to be related to the wiped out boot sector and thus
maybe helpful.
I am deep down that mine at the minute, this is getting intensely looked
at.
is there a workaround for the time
On Fri, Jul 25, 2008 at 11:13 AM, Torfinn Ingolfsen [EMAIL PROTECTED] wrote:
Hello,
On Thu, Jul 24, 2008 at 8:00 PM, Michael Sheldon [EMAIL PROTECTED] wrote:
It was the mention on the bug report Jeff linked to in the ASU
keyboard thread that we should be using the packages from
On Thu, Jul 24, 2008 at 08:49, Andy Green [EMAIL PROTECTED] wrote:
Well, a good rule of thumb for generic 1-bit transfer is divide by 10
for the max speed in Bytes/sec you could expect, here we have 4-bit so
the peak raw trasfer speed is ~10MBytes/sec *BUT* after Glamo pulls the
data from the
Wilkinson, Alex wrote:
0n Fri, Jul 25, 2008 at 02:06:15AM +0100, Michael Sheldon wrote:
I'm planning on getting a USB keyboard (a frogpad) to use with my
Freerunner, so might be willing to have a play around with getting this
sort of thing to work (time permitting).
Michael Sheldon wrote:
Wilkinson, Alex wrote:
0n Fri, Jul 25, 2008 at 02:06:15AM +0100, Michael Sheldon wrote:
I'm planning on getting a USB keyboard (a frogpad) to use with my
Freerunner, so might be willing to have a play around with getting this
sort of thing to work
On Fri, Jul 25, 2008 at 08:33:50AM +0200, David Samblas wrote:
Hi raster,
If this fork of this is how Carlsten and many others here thinks ilumme
has to be ever is created count with a tester/user/brerly developer.
I like ASU a lot but this fuzzy, not argued nor defended design
desitions
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| On Thu, Jul 24, 2008 at 08:49, Andy Green [EMAIL PROTECTED] wrote:
| Well, a good rule of thumb for generic 1-bit transfer is divide by 10
| for the max speed in Bytes/sec you could expect, here we have
Oops, sorry my mistake, that's a bluetooth frogpad. But I would guess
the usb version presents itself as a normal usb keyboard.
My Apple Wireless BT keyboard works great with the Freerunner! Very
nice combination!
;
--
Jay Vaughan
___
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| This is definitely the signature of the old MMC resume problems, not
| anything else.
|
| oh, ok. thought it to be related to the wiped out boot sector and thus
| maybe helpful.
It can be related, I expect
Alex Fitzpatrick wrote:
Two questions:
A) If part of my goal is to be a beta tester should I stick with the
default software stack or switch to one of the other options?
Use daily builds from:
http://buildhost.openmoko.org/daily/freerunner/
B) Are there any applications out there for
Hi Ross,
I work for Oxford Archaeology, we're startign to distribute
FreeRunners to various people for the purposes of encouraging
development and general community good will. I've recently been told
that our prices are less than other resellers too!
Drop me an email if you'd like a FreeRunner
On Fri, Jul 25, 2008 at 09:44:21AM +0200, Yorick Moko wrote:
are you sure the ASU is fast?
maybe it's because i'm running it from SD, but the ASU is everything
but fast here. There is even a slight delay when typing in numbers in
the dialer...
Qtopia seemed far more faster to me.
It seems
Hello,
On Fri, Jul 25, 2008 at 11:57 AM, Yorick Moko [EMAIL PROTECTED] wrote:
i'm using a fully up-to-date ASU, but exposure wont load is this
normal? i've never been able to load it
I am alos now using a fully up to date ASU, thaks to Michael's instructions.
No, Exposure won't start here
Hello,
I have just upgraded to the most updated ASU, by pointing opkg at
http://downloads.openmoko.org/openmoko-repository/ASU/
using Michael Sheldon's instructions from another thread in this list.
I really like the read battary charging indicator. :-)
But when I do 'ps ax | more' I see this:
More info.
On Fri, Jul 25, 2008 at 12:54 PM, Torfinn Ingolfsen [EMAIL PROTECTED] wrote:
I really like the read battary charging indicator. :-)
Oops... red - red battery indicator. :)
How do I restart qpe? Therer doesn't seems to be a script for that in
/etc/init.d
When I try to restart qpe
Torfinn Ingolfsen wrote:
More info.
On Fri, Jul 25, 2008 at 12:54 PM, Torfinn Ingolfsen [EMAIL PROTECTED] wrote:
I really like the read battary charging indicator. :-)
Oops... red - red battery indicator. :)
How do I restart qpe? Therer doesn't seems to be a script for that in
Hello
how can I hear Music with the Headphone.
I have a adaptor but only the right speaker work the left don't work how can I
fix this.
Yours faithfully
Carsten Feuls
___
Openmoko community mailing list
community@lists.openmoko.org
I have a adaptor but only the right speaker work the left don't work how
what kind of adaptor?
are you sure it is supposed to provide more than just one ear, mono?
___
Openmoko community mailing list
community@lists.openmoko.org
Carsten Feuls wrote:
Hello
how can I hear Music with the Headphone.
I have a adaptor but only the right speaker work the left don't work how can
I
fix this.
Start alsamixer, scroll along to the right until you find Amp Spk
and mute it (m), the sound will then come out from both
On Fri, 2008-07-25 at 11:57 +0200, Yorick Moko wrote:
i'm using a fully up-to-date ASU, but exposure wont load is this
normal? i've never been able to load it
Once I followed Micheal's instructions to point to
downloads.openmoko.org and update/upgrade, I can now launch exposure.
...cj
Hi,
It's 25th, and the 850 is sold out, again.
Is there any information or schedule of 900 ??
Best Regards,
Mac Lin
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of steve
Sent: Saturday, July 12, 2008 10:20 AM
To:
On Thu, 24 Jul 2008 19:00:59 +0100
Michael Sheldon [EMAIL PROTECTED] wrote:
Christopher White wrote:
On Thu, 2008-07-24 at 11:45 -0400, Jeff Tickle wrote:
On Thu, 24 Jul 2008 15:20:53 +
Christopher White [EMAIL PROTECTED] wrote:
I'm running stock ASU package set, just did an opkg
Am Freitag, 25. Juli 2008 14:19:29 schrieb arne anka:
I have a adaptor but only the right speaker work the left don't work how
what kind of adaptor?
are you sure it is supposed to provide more than just one ear, mono?
It is a Adapter which change the 2,5 mm to 3,5mm for my normal earphone and
Yorick Moko wrote:
it is included
If this has not already happened, the getting started and GPS pages on
the wiki should be updated to reflect this.
--
Alex
___
Openmoko community mailing list
community@lists.openmoko.org
Michael Sheldon wrote:
Carsten Feuls wrote:
Hello
how can I hear Music with the Headphone.
I have a adaptor but only the right speaker work the left don't work how can
I
fix this.
Start alsamixer, scroll along to the right until you find Amp Spk
and mute it (m), the sound
Am Freitag, 25. Juli 2008 14:23:45 schrieb Michael Sheldon:
Carsten Feuls wrote:
Hello
how can I hear Music with the Headphone.
I have a adaptor but only the right speaker work the left don't work how
can I fix this.
Start alsamixer, scroll along to the right until you find Amp Spk
Vinc,
I know its the same connector as on a Razr or Motorola C168i, so I think
its the same that Motorola uses.
The problem is the way the inner case is designed I can't get the Razr
connector on it. It has to reach really deep to reach the FR's
connector. So I don't know which one to
Were any 850s available on the 25th? Or did it just remain sold out from
previously. Maybe there will be some delay due to rework and testing changes
for the gps + sd fix.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of MKL23
Sent: Friday, July 25,
But could it be that the adatper need 4 rings against 3 rings to work?
How can I see how connector is Installed in the Neo Freerunner
probably.
sorry, but no headset here to check.
___
Openmoko community mailing list
community@lists.openmoko.org
Am Freitag, 25. Juli 2008 14:31:21 schrieb Carsten Feuls:
Am Freitag, 25. Juli 2008 14:19:29 schrieb arne anka:
I have a adaptor but only the right speaker work the left don't work
how
what kind of adaptor?
are you sure it is supposed to provide more than just one ear, mono?
It is a
Am Freitag, 25. Juli 2008 14:45:41 schrieb arne anka:
But could it be that the adatper need 4 rings against 3 rings to work?
How can I see how connector is Installed in the Neo Freerunner
probably.
sorry, but no headset here to check.
No do you know a link by Openmoko where I can search!
definitely has
the fixes in it.
Regards,
Thomas
[1]
http://buildhost.openmoko.org/daily/freerunner/200807/20080725/uImage-2.6.24+git25+8533927964761f4e2078ccd8607b90f5acc60b93-r0-om-gta02.bin
___
Openmoko community mailing list
community
On Fri, 2008-07-25 at 08:42 -0400, Crane, Matthew wrote:
Were any 850s available on the 25th? Or did it just remain sold out from
previously. Maybe there will be some delay due to rework and testing changes
for the gps + sd fix.
Wow, I must have been lucky! I took a look at the OM
I saw them appear on 24th, and removed this morning (25)
Best Regards,
Mac Lin
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Crane, Matthew
Sent: Friday, July 25, 2008 8:42 PM
To: List for Openmoko community discussion
Subject: RE: 850
No do you know a link by Openmoko where I can search!
have a look at the connector schema at
http://wiki.openmoko.org/wiki/Neo_FreeRunner_GTA02_Hardware
ring
1(base): GND
2: right out
3: left out
4(tip): mic + HOLD-button(press:short to GND)
When I deactivate Right Mixer Right Playback Swit
Hi,
can someone from Bangalore help me to flash qtopia into my freerunner
Thanks
Bijoy
+91-9731006221
___
Openmoko community mailing list
community@lists.openmoko.org
Hi there,
Just wondering those of you who have the device already, what are you doing
with your new device?
I just got my GTA02 three days ago. I am trying to get it work like a normal
phone for now.
I tried using OpenMoko os for a while and was impressed with the ammount of
packages in the
Morning Steven,
The issue is cause by an incompatible SIM card. Go get your SIM
replaced by roger with a series 4000 SIM and you will be good to go.
Check out the following URL for a little more info:
http://wiki.openmoko.org/wiki/Carriers/Rogers
Best regards,
Steven O'Reilly
On
On Thu, Jul 24, 2008 at 4:27 PM, Jim Morris [EMAIL PROTECTED] wrote:
On my Desktop I just played with Qt Jambi the Trolltech Java UI SDK for
Java. It looks good, but
will it work under Qtopia? Or only under Qt/X11?
I have Jalimo loaded on my Qtopia loaded FR and of course none of the
Hello,
On Fri, Jul 25, 2008 at 1:55 PM, Michael Sheldon [EMAIL PROTECTED] wrote:
phone work correctly again. But I'm not sure if your current problem is
being caused by that, or whether it's a completely separate problem.
think the kernel whic got installed is the right one:
[EMAIL
Which *.state file and which value would I change to increase the
speaker volume (at my ear) and the headphone volume when on a phone
call? I can barely hear people when I'm on the phone.
thanks!
. . .shawn
julien cubizolles wrote:
Le mercredi 16 juillet 2008 à 18:09 +0200, Christophe Badoit
Unfortunatly I was not able to get GPS show up onthe TangoGPS, even when
the
command line seems to be working.
gpsd seems not to be installed by default (and tangogps seems not to
define a depency to pull it in automatically)
I struggled to improve calling volume, but not very
I wrote a simple Java GUI app using Jalimo the other day just as soon as
I
got my FR.
then it run probably 2007.2, not qtopia?
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Thanks everyone for your help with getting ASU updated! I flashed to ASU for
the first time last night and am very impressed! It read the contacts on my
sim perfectly, the options are very nice, sound quality actually sounds better
(more reliable anyway), the sound comes back on resume, and
Which *.state file and which value would I change to increase the
speaker volume (at my ear) and the headphone volume when on a phone
call? I can barely hear people when I'm on the phone.
i think it's gsmhandset.state (someone correct me when wrong) and give the
fact taht the state files
Hi,
I'd like to see if I can compile couple of programs for om
I followed instructions on the wiki,
(yes, installed listed dependencies and run setup-env)
when $ om-conf openmoko-sample2
after some passes, i got:
checking for C compiler default output file name...
configure: error: C
On Fri, 2008-07-25 at 09:11 -0600, shawn sullivan wrote:
Which *.state file and which value would I change to increase the
speaker volume (at my ear) and the headphone volume when on a phone
call? I can barely hear people when I'm on the phone.
the file attached few emails up on this thread
Hey everyone,
I'm wondering how I can use tangoGPS with maps. I've gotten my GPS to
get a fix, and tangoGPS picks up the data, but I have no maps! How can
I download maps and use them with tangoGPS? I'm assuming I'll put them
on my microSD card, but how do I let tangoGPS know where the maps
what gcc, what platform?
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
On Fri, Jul 25, 2008 at 8:00 PM, Breakable [EMAIL PROTECTED] wrote:
The power management was not good enough, even after the opkg upgrade.
Seems not to go into suspend, because the battery gets depleted.
Did you change the power settings to dim first and then lock? Thats what
enables suspend
I guess I'm just not sure which value to tweak to adjust the volume
level? I could probably play around with it while on a call though, to
see which one. But if any one happens to know. . .(:
. . .shawn
arne anka wrote:
Which *.state file and which value would I change to increase the
I download maps and use them with tangoGPS? I'm assuming I'll put them
this has been discussed exhausting just yesterday:
http://lists.openmoko.org/pipermail/community/2008-July/023537.html
___
Openmoko community mailing list
On Fri, 2008-07-25 at 17:30 +0300, Breakable wrote:
Hi there,
Just wondering those of you who have the device already, what are you
doing with your new device?
reading a lot about it,
smime.p7s
Description: S/MIME cryptographic signature
___
Michael Sheldon wrote:
Michael Sheldon wrote:
Wilkinson, Alex wrote:
0n Fri, Jul 25, 2008 at 02:06:15AM +0100, Michael Sheldon wrote:
I'm planning on getting a USB keyboard (a frogpad) to use with my
Freerunner, so might be willing to have a play around with getting
this
btw: just checked and the default _device_ ist mmcblk0p1, after resume it
disappears and instead there is mmcblk1p1.
dunno if it is news to you ...
___
Openmoko community mailing list
community@lists.openmoko.org
On Fri, 2008-07-25 at 17:38 +0200, arne anka wrote:
what gcc, what platform?
ubuntu 8.4 i386 on AMD 6 chip
gcc (GCC) 4.2.3 (Ubuntu 4.2.3-2ubuntu7)
not sure if I answered what you meant by platfrom,
shouldn't it be pointed to arm-angstrom by setup-env?
smime.p7s
Description: S/MIME
arne anka wrote:
I download maps and use them with tangoGPS? I'm assuming I'll put them
this has been discussed exhausting just yesterday:
http://lists.openmoko.org/pipermail/community/2008-July/023537.html
___
Openmoko community mailing
Howdy Flemming,
Neat idea's about the FR and custom hardware. I currently have an
arduino project that works great with the Freerunner, connecting both
via blue tooth and via usb. The arduino is used to control a custom
irrigation solution I build on my roof using earth boxs, and the
Hey everybody
I have seen (In the Wiki) that it should be possible and that it
should be quite easy to administrate (Webacces, package mangement
etc.) the Neo Freerunner though the MacOSX Leopard. I was just
wondering if anyone on this list has experience with this combination
and how
I can not promise I am correct, but I think this is what have
been told on ml's.
On 2008-07-25, Corey Young [EMAIL PROTECTED] wrote:
Ok. Now that the FreeRunner is out, I'd like to discuss the GTA03 and
04. I've been listening to this list for quite some time, and have
jotted down a few
arne anka wrote:
flashing u-boot and using a recent kernel makes suspend/resume working
rather acceptable (wakes up reliable and saves power, though it keeps
waking up frequently), may corrupt your sd card though, at least if the
4gig.
This may be an obvious question, but
On Friday 25 July 2008, Alex Fitzpatrick wrote:
arne anka wrote:
flashing u-boot and using a recent kernel makes suspend/resume working
rather acceptable (wakes up reliable and saves power, though it keeps
waking up frequently), may corrupt your sd card though, at least if the
4gig.
I currently have mine working(OSX 10.5.x) and here is quick down and
dirty process it took to complete. I am sure there are many ways to
make this successful.
Power up FR and connect via USB
Download the lastest AjZaurus USB Drivers and install them.(
_Thank you_ very much, for the walk through McCreery. It seems thats
it rather straight through to make it work . Now there is not much
which is preventing me from buying the Phone. So thanks again.
Is there a difference in perfomance with connecting it with OSX contra
connecting it with a
On Fri, 2008-07-25 at 10:29 -0600, andres wrote:
On Fri, 2008-07-25 at 17:38 +0200, arne anka wrote:
what gcc, what platform?
ubuntu 8.4 i386 on AMD 6 chip
gcc (GCC) 4.2.3 (Ubuntu 4.2.3-2ubuntu7)
not sure if I answered what you meant by platfrom,
shouldn't it be pointed to
I am hoping to make some scripts, etc. for incoming call scenarios.
1) What mixer setting in alsamixer controls the ringtone volume?
2) What alsa profile is used when a call is first incoming? gsmhandset.state?
3) How can one control the state of the vibrations (on, off, and ideally etc.)?
I
2008/7/24 Aaron Sowry [EMAIL PROTECTED]:
I would also like a solution to the echo that people hear when calling
the phone - anyone found a fix for this?
I've not seen any post about having the echo fixed. It seems the
discussion always stops at that point, or goes to another direction
like
On Fri, Jul 25, 2008 at 10:38 AM, Ole Holm Frandsen [EMAIL PROTECTED] wrote:
_Thank you_ very much, for the walk through McCreery. It seems thats
it rather straight through to make it work . Now there is not much
which is preventing me from buying the Phone. So thanks again.
Is there a
Dylan Reilly wrote:
I am hoping to make some scripts, etc. for incoming call scenarios.
1) What mixer setting in alsamixer controls the ringtone volume?
2) What alsa profile is used when a call is first incoming? gsmhandset.state?
3) How can one control the state of the vibrations (on, off,
I really can't say because I don't have any personal linux systems
outside of work. I plan on installing linux on an older laptop soon so
I can have dedicated dev machine for the FR.
I have been having issues with getting my MAC ready for flash update,
but it mostly has been finding enough time
Is there a way to subscribe to this list, but only receiving mail if it's in
response to questions posted?
I check the list every day, but so many come in my inbox everyday that it's
hard to sort through my mail.
I've set up some gmail filters, of course, but it still shows up in all
mail. I do
there were several proposals to use nntp through gmane or so.
a newsreader might allow you only to donwload the threads you are
interested in.
___
Openmoko community mailing list
community@lists.openmoko.org
Timo Jyrinki wrote:
2008/7/24 Aaron Sowry [EMAIL PROTECTED]:
I would also like a solution to the echo that people hear when calling
the phone - anyone found a fix for this?
I've not seen any post about having the echo fixed. It seems the
discussion always stops at that point, or
I recommend using gmane. Get a newsreader (I use thunderbird, which has
a newsreader built in), and subscribe to the
gmane.comp.handhelds.openmoko.community newsgroup on the news.gmane.org
news server.
In thunderbird the result is I get all the email headers, threaded just
like in my normal
On Fri, Jul 25, 2008 at 2:31 PM, Aaron Sowry [EMAIL PROTECTED] wrote:
Timo Jyrinki wrote:
2008/7/24 Aaron Sowry [EMAIL PROTECTED]:
I would also like a solution to the echo that people hear when calling
the phone - anyone found a fix for this?
I've not seen any post about having the
Hello,
On Fri, Jul 25, 2008 at 4:35 PM, Staley, Daniel L [EMAIL PROTECTED] wrote:
However, once I opkg upgraded this morning, I ran into the problem a few
people have posted on here about (Exposure not working).
What do you get if you do 'opkg info kernel'?
Somehow the 'opkg update' followed
Geoff Ruscoe wrote:
I wrote a simple Java GUI app using Jalimo the other day just as soon as
I got my FR.
It worked great, just as described on the wiki/links from wiki.
Yes I did that too on 2007.2 which has an X Server running. The SWT port is to
GTK not Qt, so it
does not not
More info.
On Fri, Jul 25, 2008 at 5:09 PM, Torfinn Ingolfsen [EMAIL PROTECTED] wrote:
Ok, a cuple of restars and it seems to work now. Phew!
But qpe still crashes / fails:
[EMAIL PROTECTED]:~# ps ax | grep qpe
1346 ?S 0:00 /usr/bin/app-restarter The qpe process
vanished. This is
well, the card is a kingston 4gb class 4.
yesterday i downloaded a map with tangogps and meanwhile the fr went to
suspend. afterwards a few directories were misisng.
trying
ls /media/card/Maps/om/adirectorynotthere/
gives errors (something w/ read access i think)
so i decided to delete the
pe, 2008-07-25 kello 20:31 +0200, Aaron Sowry kirjoitti:
Everyone I have spoken to using the GTA02 handset has mentioned large
amounts of echo when calling to/from another cellphone,
FWIW, I had this problem for most of my GTA01 use unless I tuned down
the volume manually from the slider
1 - 100 of 152 matches
Mail list logo
