On Mon, 8 Sep 2008 11:07:59 +0200
Jean-Eric Cuendet [EMAIL PROTECTED] wrote:
Specifically what we need is help doing OpenGL ES over X. The SoC would
be the Samsungs 6410. So part driver work and part X work. Openmoko
would be willing to hire somebody full time, part-time, or even on a per
Bryan DeLuca wrote:
On Mon, 8 Sep 2008 11:07:59 +0200
Jean-Eric Cuendet [EMAIL PROTECTED] wrote:
Specifically what we need is help doing OpenGL ES over X. The SoC would
be the Samsungs 6410. So part driver work and part X work. Openmoko
would be willing to hire somebody full time,
On Tue, Sep 9, 2008 at 7:34 AM, Kevin Squire [EMAIL PROTECTED] wrote:
On Mon, Sep 8, 2008 at 11:03 AM, Kevin Squire [EMAIL PROTECTED]
wrote:
Hi,
I have problems accessing my 8Go SD Card
snip snip
For my disk, my thoughts are that the first sector is bad. I'll try
to confirm this
Robert William Hutton wrote:
Orlando wrote:
I tried this...
[EMAIL PROTECTED]:~# opkg list_installed | grep gpsd
gpsd-conf - 2.34-r9 -
[EMAIL PROTECTED]:~# opkg install gpsd
An error ocurred, return value: 2.
[EMAIL PROTECTED]:~# opkg install gps
An error ocurred, return value: 2.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
aahhh .. i knew i forgot something .. i do so since buildhost was not
longer available and wanted to tell .. but i simply forgot :/
regarding the size: i think the old krnl comes with a lot debug-
symbols ..
ciao, morlac
Am 08.09.2008 um 23:45
On Tue, Sep 9, 2008 at 00:29, Lorn Potter [EMAIL PROTECTED] wrote:
do /opt/Nokia/Qtopia/qpe.sh start
or ln -s /etc/init.d/qpe.sh /etc/rc5.d/S98qpe.sh
to make it start up automatically on boot. (dont forget to remove the link in
/etc/rc5.d to xserver-nodm
Thanks.
But I still can't get it
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| I wanted to build a kernel to get some drivers as modules instead of
built-in. I followed
|
| http://wiki.openmoko.org/wiki/Toolchain
| + BRANCH='(no'
There doesn't seem to be an active branch in git?
2008/9/9 Jean-Eric Cuendet [EMAIL PROTECTED]
Hi,
I installed the last image from Lorn of QTopia 4.3.3
I have a problem: when I start it, it seems like if QTopia thinks the FR is
powered by USB, so it doesn't go to sleep after 30 seconds.
If I plug it to USB, it then detects the cable (the
And now i got the kernel from today running and it seems to work.
does suspending by holding pwr for about 4 secs still work?
i tried a kernel+module-tarball about two weeks ago and at least
suspending that way stopped to work -- so i switched back to the
installation kernel+modules.
Hi all,
I managed to acces my SD Card (SanDisk SDSDQ-8192-E11M) using a slow
500 clock.
My uboot version is 1.3.2-moko12
downloaded 9/6/2008 [1]_
.. [1]
http://downloads.openmoko.org/releases/Om2008.8-update/gta02v5_and_up-u-boot.bin
but here is more question about u-boot_env
Of
the batteries should be pretty standart stuff. I got the same form
factor in my nokia (although it is a bit shorter, the connectors are
in the right place and the width is the same). I suggest you should
simply walk into the next mobile accessory store with the battery to
get a compatible one. No
Yes, I know as I also own quite a few BC-5s and remakes ;-)
But I'm looking specifically for the original ones to have the coulomb
counter and a working charge meter...
On Tue, Sep 9, 2008 at 10:06 AM, Thorben Krueger [EMAIL PROTECTED]wrote:
the batteries should be pretty standart stuff. I got
firstly:
- this is a support-list issue
- prefix your subject with at least the distribution you're using (2007.2,
2008.8, fso, debian) and maybe the hardware (gta01, gta02)
to make it easier to help you
When I run tangogps it tells me that I have no gps. It is weird because I
have the
Nicolas LAURANCE wrote:
Hi all,
I managed to acces my SD Card (SanDisk SDSDQ-8192-E11M) using a slow
500 clock.
My uboot version is 1.3.2-moko12
downloaded 9/6/2008 [1]_
.. [1]
http://downloads.openmoko.org/releases/Om2008.8-update/gta02v5_and_up-u-boot.bin
but here is more
I don't suppose you could tell me what file to look at? I've not seen
look below /etc for pulseaudio. there's a config file with sample in it.
the community archives of juni should contain a few messages describing
how to do it.
___
Openmoko
Following the http://wiki.openmoko.org/wiki/Gentoo guide i am trying to
build my system, but i will not test it until i receive the 8Gb memory card
i ordered. I will surely send a report and maybe an image (where should i
send it?) when something works..
2008/9/9 Dennis. Yxun [EMAIL PROTECTED]
arne anka wrote:
I don't suppose you could tell me what file to look at? I've not seen
look below /etc for pulseaudio. there's a config file with sample in it.
the community archives of juni should contain a few messages describing
how to do it.
you're referring to
I hope you guys don't mind killing your phone or uSD's memory sooner
than everyone else :)
Rui
On Tue, Sep 09, 2008 at 12:16:47PM +0200, Previdi Roberto wrote:
Following the http://wiki.openmoko.org/wiki/Gentoo guide i am trying to
build my system, but i will not test it until i receive the
arne anka wrote:
At the moment i got iceweasel running on my debian freerunner. It is
also a firefox port which works great. I could use any original addon
from mozilla. :)
i recently found out about midori -- a small webkit based browser,
available in the debian repositiories
I just
--- On Tue, 9/9/08, Thomas Bertani [EMAIL PROTECTED] wrote:
why it isn't possible to use the game at 480x640
resolution?
It is possible. Modify the /home/root/.duke3d/duke3d.cfg file
to set 640x480, but you will see that it is too slow.
Rafa
--
Rafael Ignacio Zurita
Buenos Aires, Argentina
2008/9/9 Rafael Ignacio Zurita [EMAIL PROTECTED]
--- On Tue, 9/9/08, Thomas Bertani [EMAIL PROTECTED] wrote:
why it isn't possible to use the game at 480x640
resolution?
It is possible. Modify the /home/root/.duke3d/duke3d.cfg file
to set 640x480, but you will see that it is too slow.
Someone know something about this? (Midori):
a) How to remove the string: you are using a root account (without
creating a non root account)
b) How to make the address bar a bit larger (to fill the screen!)
Thank you
___
Openmoko community mailing list
Thanks to Michael Siloh,
I can proudly annouce the opening of the spanish openmoko list,
http://lists.projects.openmoko.org/mailman/listinfo/local-openmoko-spain
This intended to help the spanish non-english skilled users to help and
be helped by the Openmoko community, the spanish
Make sure it's portrait style 480x640 not 640x480. Unless that was a typo.
Also, has anyone found a workaround for that 'multivoc' error?
Pulseaudio is not installed.
-Nick
Thomas Bertani wrote:
2008/9/9 Rafael Ignacio Zurita [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
--- On Tue,
this I knew, but Russell mentions changing the ringtone *format*, not
just the tone. I've not seen anything about this.
sorry, must have missed that.
re format i remember somebody posting a patch for python, that enabled
something. and i think, it was for 2007.2 (since i skip most other
On Tuesday 09 September 2008, Rui Miguel Silva Seabra wrote:
I hope you guys don't mind killing your phone or uSD's memory sooner
than everyone else :)
Why? Are you making some unwarranted assumptions about using Gentoo on
embedded systems?
Rui
On Tue, Sep 09, 2008 at 12:16:47PM +0200,
I want to compile (with ./configure;make;make install) a software from
source on the neo freerunner without sdk or toolchain, directly from the
phone.
What I have to install?
___
Openmoko community mailing list
community@lists.openmoko.org
I think you need to apt-get the following:
binutils g++ cpp libc6-dev
(I think you might need g++-symlinks cpp-symlinks - not sure if they are
pulled in automatically)
On Tue, Sep 9, 2008 at 5:40 PM, Thomas Bertani [EMAIL PROTECTED] wrote:
I want to compile (with ./configure;make;make
i was thinking about installing it completely on the external microsd, so
there shouldn't be any problem of this sort.. but anyway.. dfu-util is
always there :)
and speaking about gentoo, i trust portage nearly as much as i trust
make..
roby
On Tue, Sep 9, 2008 at 12:56 PM, Rui Miguel Silva
[EMAIL PROTECTED] ha scritto:
I wanted to build a kernel to get some drivers as modules instead of
built-in. I followed
http://wiki.openmoko.org/wiki/Toolchain
When I went to build the kernel, I had to change the 'build' script to point
to the toolchain. After that was fixed, I got this
Hi all,
Does anyone else have the problem of the internal clock being off by a
few hours after rebooting the device? It seems to happen randomly to me
(I have not yet determined a definite cause for it) - but sometimes
after a reboot, the time on the phone is 2h earlier than it should be.
I'd
On Tue, Sep 09, 2008 at 03:38:41PM +0800, Andy Green wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| I wanted to build a kernel to get some drivers as modules instead of
built-in. I followed
|
| http://wiki.openmoko.org/wiki/Toolchain
|
i love you.. i've been able to compile wget from sources.
i had to install the gettext package too, to get the msgfmt binary.
the report of time make is:
real 4m 54,26
user 4m 21.92
sys 0m 25,34
so it seems that the cpu is busy making qpe survive.. anyway less than 5
minutes to get a complete
2008/9/9 sparky mat [EMAIL PROTECTED]
I think you need to apt-get the following:
binutils g++ cpp libc6-dev
(I think you might need g++-symlinks cpp-symlinks - not sure if they are
pulled in automatically)
Thanks, binutils is what I was searching for
Thomas Bertani wrote:
I want to compile (with ./configure;make;make install) a software from
source on the neo freerunner without sdk or toolchain, directly from the
phone.
What I have to install?
Well, wouldn't it so slow? It's a 400Mhz, btw! :P
--
Treviño's World - Life and Linux
Hi All
Only 3 sec I can see nice boots and next time change back to standard
openmoko screen.
Who have solution for resolving problem.(Neo FreeRunner)
B.R
Popov Dmitry
___
Openmoko community mailing list
community@lists.openmoko.org
2008/9/9 Marco Trevisan (Treviño) [EMAIL PROTECTED]
Thomas Bertani wrote:
I want to compile (with ./configure;make;make install) a software from
source on the neo freerunner without sdk or toolchain, directly from the
phone.
What I have to install?
Well, wouldn't it so slow? It's a
I tried to compile gnuboy both in qtopia and openmoko (2008.8 update) but
the same error occurres when I type make
cc1: warning: -f[no-]force-mem is nop and option will be removed in 4.2
In file included from sys/linux/joy.c:6:
/usr/include/linux/joystick.h:131: error: expected
arne anka wrote:
this I knew, but Russell mentions changing the ringtone *format*, not
just the tone. I've not seen anything about this.
sorry, must have missed that.
re format i remember somebody posting a patch for python, that enabled
something. and i think, it was for 2007.2
On Sep 09, Andreas Fischer wrote:
Does anyone else have the problem of the internal clock being off by a
few hours after rebooting the device? It seems to happen randomly to me
(I have not yet determined a definite cause for it) - but sometimes
after a reboot, the time on the phone is 2h
On Tue, Sep 09, 2008 at 01:00:36PM +0100, Al Johnson wrote:
On Tuesday 09 September 2008, Rui Miguel Silva Seabra wrote:
I hope you guys don't mind killing your phone or uSD's memory sooner
than everyone else :)
Why? Are you making some unwarranted assumptions about using Gentoo on
yes it's slow, but it's all in the emotion.. You don't have a real linux
system if you cannot compile code in it...
On Tue, Sep 9, 2008 at 2:40 PM, Marco Trevisan (Treviño)
[EMAIL PROTECTED]wrote:
Thomas Bertani wrote:
I want to compile (with ./configure;make;make install) a software from
On Tue, Sep 09, 2008 at 02:51:14PM +0100, Rui Miguel Silva Seabra wrote:
On Tue, Sep 09, 2008 at 01:00:36PM +0100, Al Johnson wrote:
On Tuesday 09 September 2008, Rui Miguel Silva Seabra wrote:
I hope you guys don't mind killing your phone or uSD's memory sooner
than everyone else :)
cc1: warning: -f[no-]force-mem is nop and option will be removed in 4.2
that's only a warning, should be save to ignore.
In file included from sys/linux/joy.c:6:
/usr/include/linux/joystick.h:131: error: expected
specifier-qualifier-list
before '__s64'
google has a few hits for that:
Rui Miguel Silva Seabra 写道:
Please, no distro-war, you're free to kill your flash devices sooner ;)
we cross-compile the package in our desktop, just like debian's distro
then install the binary *.tbz2 into the FR.
the goodness here is that we can leverage the dignity of gentoo package
2008/9/9 arne anka [EMAIL PROTECTED]
cc1: warning: -f[no-]force-mem is nop and option will be removed in 4.2
that's only a warning, should be save to ignore.
In file included from sys/linux/joy.c:6:
/usr/include/linux/joystick.h:131: error: expected
specifier-qualifier-list
before
how to disable joystick ? oO
./configure --help
?
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Under current 2008 testing builds, playing (compressed) music through the
qtopia media player causes pulseaudio spike to crazy levels of cpu
utilization (~ 50%). This is on top the load for the media player itself
(~30%). Needless to say, this makes the poor FR incapable of decompressing
the music
yuppie, thanks a lot, I compliled it usccessfully, but now, when I try to
launch the app, I get this error...
SDL: can't set video mode: No video mode large enough for 160x144
Signal 11
how can I solve it?
___
Openmoko community mailing list
On Sep 9, 2008, at 7:05 AM, [EMAIL PROTECTED] wrote:
On Tue, Sep 09, 2008 at 02:51:14PM +0100, Rui Miguel Silva Seabra
wrote:
On Tue, Sep 09, 2008 at 01:00:36PM +0100, Al Johnson wrote:
On Tuesday 09 September 2008, Rui Miguel Silva Seabra wrote:
I hope you guys don't mind killing your phone
I installed 2008.8 last night and GSM worked well immediately on boot. I did a
number of things, particularly opkg update / opkg upgrade (although the latter
output nothing).
After rebooting, gsm ceased to work. I pull up it's log and keep seeing output
attributed to a machine_gta01.c. Perhaps
Sorry, i have to correct: the guide i am following is this one:
http://gentoo-wiki.com/User:TuXXX
On Tue, Sep 9, 2008 at 12:16 PM, Previdi Roberto
[EMAIL PROTECTED]wrote:
Following the http://wiki.openmoko.org/wiki/Gentoo guide i am trying to
build my system, but i will not test it until i
On Tue, Sep 09, 2008 at 03:38:41PM +0800, Andy Green wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| I wanted to build a kernel to get some drivers as modules instead of
built-in. I followed
|
| http://wiki.openmoko.org/wiki/Toolchain
|
On Tue, Sep 09, 2008 at 07:25:59AM -0700, Rodney Myers wrote:
On Sep 9, 2008, at 7:05 AM, [EMAIL PROTECTED] wrote:
On Tue, Sep 09, 2008 at 02:51:14PM +0100, Rui Miguel Silva Seabra wrote:
On Tue, Sep 09, 2008 at 01:00:36PM +0100, Al Johnson wrote:
On Tuesday 09 September 2008, Rui Miguel
You can allways use compiled package and avoid to compile anything on
gentoo,, and due we all use almos the same machine is no sense to compile
over and over again, only if you find that a packges is not already
compliled you can do it your self and the share with the rest to avoid it.
Regards
SDL: can't set video mode: No video mode large enough for 160x144
can't really help you there.
have a look at google and check maybe with fbset what idea sdl might have
of your screen.
http://doc.freevo.org/FAQ#head-a6b386d46c6dd5694353689a4017ccfbcaf19ee9
here's one related to zaurus
Hi there,
you have aviable on http://compartida.net/openmoko/FDOM a rootfs/kenel
image ready to flash of an OM2008.08-updates distribution with some apps
already installed and some fixes posted in the lists done.
here you have more detailed information
Michele Renda wrote:
Someone know something about this? (Midori):
a) How to remove the string: you are using a root account (without
creating a non root account)
I had made a patch for it; just grep the code for that string, disabling
that bar is easy as comment the code ;)
--
Treviño's
Hello,
I'd like to add that I've also confirmed that suspend bug where
sometimes the FR just does not want to wake up and I have to pop out the
battery. Also, sometimes my FR does not wake up on SMS (it USUALLY
does) and I have to wake the FR up myself, and then it receives my SMS
messages.
wow, very cool stuff, a hug back!
I haven't checked it out yet, but I will tomorrow (it's 2am here, past
bedtime) ;)
David Samblas wrote:
Hi there,
you have aviable on http://compartida.net/openmoko/FDOM a rootfs/kenel
image ready to flash of an OM2008.08-updates distribution with some apps
Dylan Reilly wrote:
Under current 2008 testing builds, playing (compressed) music through
the qtopia media player causes pulseaudio spike to crazy levels of cpu
utilization (~ 50%). This is on top the load for the media player itself
(~30%). Needless to say, this makes the poor FR incapable
you have aviable on http://compartida.net/openmoko/FDOM a rootfs/kenel
image ready to flash of an OM2008.08-updates distribution with some apps
already installed and some fixes posted in the lists done.
Does this include a fix to SD card corruption upon suspending?
- Craig
p.s. looks
ehm... there is also a fbgnuboy executable oO
when I try to launch it, I get the error message controlling terminal is
not the graphics console both via ssh and via terminal on the neo... (under
qtopia).
Via ssh after getting this error, I also get disconnected from ssh...
Suggestions?
On Aug 25, Joel Newkirk wrote:
probably still useful - the question is really whether the Freerunner can
power a hub and two adapters)
I've thought about different idea - can FreeRunner be powered from USB power
adaper connected to the USB hub? Like this:
Power plug
|
David Samblas wrote:
Thanks to Michael Siloh,
I can proudly annouce the opening of the spanish openmoko list,
http://lists.projects.openmoko.org/mailman/listinfo/local-openmoko-spain
This intended to help the spanish non-english skilled users to help and
be helped by the Openmoko
Yes you can use gentoo with binary packages, but you loose the great
configurability given by the tuning of the USE flags... i think it's better
if i can manage to crosscompile from my desktop, and then copy the generated
binary on the moko. slower, but more flexible..
On Tue, Sep 9, 2008 at 5:28
Have you considered a spares pack?
http://us.direct.openmoko.com/products/spares-pack
On Tuesday 09 September 2008 04:12:09 Stefan Fröbe wrote:
Yes, I know as I also own quite a few BC-5s and remakes ;-)
But I'm looking specifically for the original ones to have the coulomb
counter and a
Previdi Roberto wrote:
yes it's slow, but it's all in the emotion.. You don't have a real linux
system if you cannot compile code in it...
Oooh! T-shirt! Perhaps with a picture of a compilation taking place on a
FreeRunner!
___
Openmoko community
Previdi Roberto wrote:
yes it's slow, but it's all in the emotion.. You don't have a real linux
system if you cannot compile code in it...
Oooh! T-shirt! Perhaps with a picture of a compilation taking place on a
FreeRunner!
___
Openmoko
Previdi Roberto wrote:
yes it's slow, but it's all in the emotion.. You don't have a real linux
system if you cannot compile code in it...
Oooh! T-shirt! Perhaps with a picture of a compilation taking place on a
FreeRunner!
___
Openmoko
Does anyone have an overlay or something that lets you install illume,
frameworkd, etc?
On Monday 08 September 2008 20:59:22 Dennis.Yxun wrote:
HI Devs:
As a die-hard Gentoo fans, I'd be happy to see someone
deliver a Gentoo openmoko distribution which leverage the greatness of
Hello
i searched this Mailinglist for the word thanks in the Subject and i
couldn't find one so
I want to thank everyone from Openmoko and all other devs who contribute
to this outstanding project
the combination of Open Source and Open Hardware is just brilliant.
My Thanks go to
Hi to all,
[EMAIL PROTECTED]:~#
[EMAIL PROTECTED]:~# opkg install
http://downloads.openmoko.org/repository/Om2008.8/armv4t/gpsd_2.34-r9_armv4t.opk
Downloading
http://downloads.openmoko.org/repository/Om2008.8/armv4t/gpsd_2.34-r9_armv4t.opk
Multiple packages (gpsd and gpsd) providing same name
p.s. looks interesting - installing now!
after a long hiatus away from the freerunner hacking for a month or so
(hey, so i got an iphone, sue me!) i am very glad to see that there
are folks now sharing booting images! this is gotta be good for
freerunner now, which btw i -have- been
On Tuesday 09 September 2008 10:44:21 Dylan Reilly wrote:
Under current 2008 testing builds, playing (compressed) music through the
qtopia media player causes pulseaudio spike to crazy levels of cpu
utilization (~ 50%). This is on top the load for the media player itself
(~30%). Needless to
:) please let make spectations at safety levels :) FDOM is not more than
a few opkg installs, a little bit of glue here and a few painting there
but basically stills a OM2008.8-update :)
Jay (and others) I sugesst you to backup your own image first , just as
precaution :).
Here is a method i
Have you tried setting the resolution on the command line?
Something like this:
sdlgnuboy --vmode=480,640,32 tetris.gb
Chris.
On Wed, Sep 10, 2008 at 12:43 AM, Thomas Bertani [EMAIL PROTECTED] wrote:
yuppie, thanks a lot, I compliled it usccessfully, but now, when I try to
launch the app, I
Thanks Juergen :)
Paul
On Tue, Sep 9, 2008 at 7:04 PM, Juergen Schinker [EMAIL PROTECTED]
wrote:
Hello
i searched this Mailinglist for the word thanks in the Subject and i
couldn't find one so
I want to thank everyone from Openmoko and all other devs who contribute
to this
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello
I want to share something that I found in a shop:
http://www.conectica.ro/display/1-63-19-Adaptoare/Adaptor_USB_A___USB_A___.html
With it I could use the shipped cable (Usb to Micro Usb) to attach a
pendrive to my FR and to get my FR running.
Hi,
just upgraded my openmoko to todays updates, and hooray: alarm now
wakes from suspend and sounds the alert ... almost that is:
It seems to be off in time (delayed) by the amount of time you specify
in the blank screen option, and each time you change that option, the
new time gets added to
I did nothing special, but I have had configurations where there was no
music listed in the program.
Where, specifically (i.e., directory and partition) do you have your music
stored?
Did your FR suspend once before you ran the program? Suspending right now
under testing borks the SD card mount
On Tue, Sep 9, 2008 at 6:59 PM, Michael Shiloh [EMAIL PROTECTED] wrote:
Previdi Roberto wrote:
yes it's slow, but it's all in the emotion.. You don't have a real linux
system if you cannot compile code in it...
Oooh! T-shirt! Perhaps with a picture of a compilation taking place on a
Hi all,
i was trying to emulate the gta02 on qemu, but i find i can't patch the
kernel.
I'm following the instructions included in the README in the qemu/openmoko
folder.
What fail is this:
cg-switch -r fbfbc5130075e233f2fd2613e2897c3c4ed4bc7f gta02fake
and fails telling:
error: unable to find
On Tue, Sep 09, 2008 at 09:49:22AM -0500, Stephen Shelton wrote:
I installed 2008.8 last night and GSM worked well immediately on boot. I did a
number of things, particularly opkg update / opkg upgrade (although the latter
output nothing).
After rebooting, gsm ceased to work. I pull up it's
On Mon, Sep 8, 2008 at 6:34 AM, Pradeep Gottumukkala
[EMAIL PROTECTED] wrote:
Hi all,
I felt proud to be part of openmoko development. I have developed a
system date and time settings application(time-man) in python and I have
tested it on Neo1973(OM2007.2).
Hope you guys would like to
On Tue, 09 Sep 2008 19:36:55 +0200, Michele Renda [EMAIL PROTECTED]
wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello
I want to share something that I found in a shop:
http://www.conectica.ro/display/1-63-19-Adaptoare/Adaptor_USB_A___USB_A___.html
With it I could use the
David Samblas wrote:
Hi there,
you have aviable on http://compartida.net/openmoko/FDOM a rootfs/kenel
image ready to flash of an OM2008.08-updates distribution with some apps
already installed and some fixes posted in the lists done.
Thank you so much! I've loaded this and was greeted
Rodney Myers [EMAIL PROTECTED] wrote:
With all of the thrashing, while it's attempting to compile
everything?
that's what crosscompiling is for. nobody is going to use portage to
compile from source on the phone itself. how you came to that
conclusion is beyond me.
best regards ...
clemens
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I was thinking that a way to reduce the quantity of cable a person has
to have with his will be to have:
1 x Usb - MicroUsb camle
1 x USB A Female - Female Adaptor (see A)
1 x Recharger without cable (see B)
A)
On Sat, 6 Sep 2008 21:13:15 -0400, Charles Pax [EMAIL PROTECTED]
wrote:
Does anyone know how to replace the ink cartridge in the stylus that
comes
with the Freerunner? It seems like I can just pull it out, but I don't
want
to break it. Also, does anyone have a Staples of OfficeMax item number
Hi,
I have a dedicated server (P4 3.2 GHz) connected directly to Internet.
This is a proposition for those that would like a system to automatically
build IPKG for Openmoko.
I can give them access to it (or put their scripts) to auto build packages
for Openmoko.
I need help:
1) To create scripts
On Tue, 9 Sep 2008 18:23:43 +0200, Maciej Delmanowski [EMAIL PROTECTED]
wrote:
On Aug 25, Joel Newkirk wrote:
probably still useful - the question is really whether the Freerunner
can
power a hub and two adapters)
I've thought about different idea - can FreeRunner be powered from USB
On Tue, 9 Sep 2008 12:49:50 -0400, Daniel Benoy [EMAIL PROTECTED] wrote:
Have you considered a spares pack?
http://us.direct.openmoko.com/products/spares-pack
On Tuesday 09 September 2008 04:12:09 Stefan Fröbe wrote:
Yes, I know as I also own quite a few BC-5s and remakes ;-)
But I'm
Joel Newkirk wrote:
On Tue, 9 Sep 2008 18:23:43 +0200, Maciej Delmanowski [EMAIL PROTECTED]
wrote:
On Aug 25, Joel Newkirk wrote:
probably still useful - the question is really whether the Freerunner
can
power a hub and two adapters)
I've tried to answer many of these questions here:
Thomas Bertani wrote:
2008/9/9 Jean-Eric Cuendet [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
Hi,
I installed the last image from Lorn of QTopia 4.3.3
I have a problem: when I start it, it seems like if QTopia thinks
the FR is powered by USB, so it doesn't go to sleep
On Tue, 09 Sep 2008 12:35:44 -0700, Michael Shiloh [EMAIL PROTECTED]
wrote:
I've tried to answer many of these questions here:
http://wiki.openmoko.org/wiki/USB_host
If you feel this information is unclear, lacking, or wrong, please
correct or please let me know.
In particular, I'd love
Cédric Berger wrote:
On Tue, Sep 9, 2008 at 00:29, Lorn Potter [EMAIL PROTECTED] wrote:
do /opt/Nokia/Qtopia/qpe.sh start
or ln -s /etc/init.d/qpe.sh /etc/rc5.d/S98qpe.sh
to make it start up automatically on boot. (dont forget to remove the link
in /etc/rc5.d to xserver-nodm
Thanks.
On Tue, 9 Sep 2008 20:42:13 +0200
Thomas B. [EMAIL PROTECTED] wrote:
On Tue, Sep 09, 2008 at 09:49:22AM -0500, Stephen Shelton wrote:
I installed 2008.8 last night and GSM worked well immediately on boot. I
did a
number of things, particularly opkg update / opkg upgrade (although the
Thanks!
Really sweet image you have there.
//danielh
2008/9/9 David Samblas [EMAIL PROTECTED]:
Hi there,
you have aviable on http://compartida.net/openmoko/FDOM a rootfs/kenel
image ready to flash of an OM2008.08-updates distribution with some apps
already installed and some fixes posted in
Hi,
I had been posting before on the wifi issue.
After I had problems with connecting to my WPA-secured WLAN, I managed
easily (with the description as can be found in the wiki) to connect to a
WPA2-secured WLAN.
Then, I set my AP to WEP and authentication with wpa_supplicant worked --
once!
1 - 100 of 140 matches
Mail list logo