В Втр, 23/11/2010 в 20:41 +0100, David Garabana Barro пишет:
But this open an interesting question.
Why is uSD partition card recognised with Qi and not with uboot?
Maybe my I/O problems are also related to uboot?
Will try to boot SHR from NAND with Qi, and see if my card stops givin
I/O
В Срд, 24/11/2010 в 20:11 +0300, Gennady Kupava пишет:
В Втр, 23/11/2010 в 20:41 +0100, David Garabana Barro пишет:
But this open an interesting question.
Why is uSD partition card recognised with Qi and not with uboot?
Maybe my I/O problems are also related to uboot?
Will try to boot
В Пнд, 29/11/2010 в 01:24 -0800, c_c пишет:
Hi,
I was looking at arowboat.org - which is a project at getting Android
working on all TI OMAP series boards and I saw a link to opensourcemid.org.
Apparently, Embest (who also make the DevKit 8000 - a beagle board like
board) have made a 7 MID
Hi, all,
Inspired by this bug:
Bugs:
- GPS (I didn't try it yet, sorry) seems always powered on, or at least in
Neo Tool it is always GPS: 1, also after powered it off with the Devtools.
I decided to announce in ml that i setup small page on wiki about u-boot
Hey, i didn't done proper separation or 2 unrelated questions.
This part about u-boot and power-on-boot problem:
I decided to announce in ml that i setup small page on wiki about u-boot
http://wiki.openmoko.org/wiki/U-boot-gena2x
I am planning to post all u-boot binaries I am doing to that
В Втр, 07/12/2010 в 21:55 +0100, Francesco De Vita пишет:
Bugs:
- GPS (I didn't try it yet, sorry) seems always powered on, or at least in
Neo Tool it is always GPS: 1, also after powered it off with the
I will take a look.
Update: GPS is off after a suspend. If GPS is
Hi, John
I replaced with cap too. It's easy to extract one from some old phone.
Result is very good then you remove main battery.
BUT
The last time my FreeRunner's battery died, the clock reset to epoch.
Now, it no longer keeps time during suspend either. I'm guessing this
means the clock
В Сбт, 25/12/2010 в 19:10 +0300, Ivan Matveev пишет:
Hello All, Radek
Trying
2010-12-06 03:03 qi-v30.udfu
2010-12-06 02:11 qtmoko-debian-v30.ubi
2010-12-06 03:03 uImage-v30.bin
qi complains that lzo compressor is mot compiled in ubifs.
Btw, don't know where this is set in qi, but you may try u-boot:
http://wiki.openmoko.org/wiki/U-boot-gena2x
Gennady
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Hi,
I don't want to go back to u-boot.
I disagree - going to Qi is going back, going to u-boot is going
forward :)
echo 'rootflags=compr=zlib' p1/append-GTA02
Are you sure qi is really reading this? i am sure it is not.
No joy.
Same result: kernel complains that lzo is not compiled in.
В Пнд, 27/12/2010 в 18:16 +0300, Ivan Matveev пишет:
On Mon, 27 Dec 2010 08:33:09 +0300
Gennady Kupava g...@bsdmn.com wrote:
Hi,
I don't want to go back to u-boot.
I disagree - going to Qi is going back, going to u-boot is going
forward :)
I like Qi's minimalism, automatic
Hi, Ivan,
В Втр, 28/12/2010 в 06:04 +0300, Ivan Matveev пишет:
Lets burn some linux.org.ru style flame!
Hey, such foreword spoils good talk, so i'll try to be short.
It's also possible to setup u-boot like qi, 'read kernel first from
sd part 1, boot if loads, then try from sd part 2, boot if
В Срд, 29/12/2010 в 23:28 +0100, Glenn пишет:
At 0:06 +0200 30/12/10, Timo Juhani Lindfors wrote:
Glenn glenn.mh...@gmail.com writes:
Maybe it might be a good idea to embed grsecurity in the kernel - for
two reasons:
I think the main goal should be to upstream our changes, not add new
Hi, Vinzenz
Just get kernel matching your distro, add your favorite patch and
rebuild. You may use almost any armel toolchain. In fact only sources
used in particular distro are different, but you may find it on site of
your favorite distro.
You may join irc on freenode, #openmoko channel if you
Hi, Tom,
В Птн, 31/12/2010 в 09:28 -0500, tom пишет:
i bought the freerunner a while ago only because of android, but got
quickly disapointed by the lack of speed. is qtmoto faster?
Just try it.
And which version of android you tried? I think 2-4-2 (since September
probably) and FIFO depth
the finger scroll/touch/response' speed
is. not sure if real numbers would make such a decision easier ;-)
thx !!!
On Fri, Dec 31, 2010 at 8:40 AM, Gennady Kupava g...@bsdmn.com wrote:
Hi, Tom,
В Птн, 31/12/2010 в 09:28 -0500, tom пишет:
i
Hi,
Notice, that if your distro-specific qi already has some kernel params
changed in source or have some additional patches, you have to use
distro-specific qi source as base.
You may attempt to cat /proc/cmdline to check that.
Alternatively just use u-boot ;)
Gennady
В Вск, 02/01/2011 в
В Птн, 07/01/2011 в 03:16 -0800, sferic пишет:
Hi,
I would like to use the new QtMoko v31 as my Dailly-Phone on NAND parallel
to two other Distros and a big Documents-Partition on my SD-Card. Till v26 I
could boot QtMoko over U-Boot 1.3.2-moko 12 (AUX + Power) and the other two
over Qi
В Пнд, 10/01/2011 в 21:24 +0100, Alfa21 пишет:
hello,
when I add contacts to my address-book from a received sms or voice call,
it's highly probable I loose them after a reboot.
that happens not always but in 90% of cases.
my sim card is half free for new contacts.
also, I see if I do
В Втр, 11/01/2011 в 19:03 +0100, Sylvain Paré пишет:
http://pare.sylvain.perso.sfr.fr/video/FRvsP2.ogg
Look like slowness question finally closed :)
Gennady
___
Openmoko community mailing list
community@lists.openmoko.org
В Пнд, 17/01/2011 в 13:21 +1300, Robin Paulson пишет:
hi,
i tried flashing the latest qtmoko last night - it flashed with no
errors, but then wouldn't boot. lots of errors such as:
INFO: RCU detected CPU 0 stall (t=4294910048/2000 jiffies)
INFO: RCU detected CPU 0 stall (t=4294916048/2000
В Втр, 18/01/2011 в 14:14 +1300, Robin Paulson пишет:
On 17 January 2011 20:00, Gennady Kupava g...@bsdmn.com wrote:
В Пнд, 17/01/2011 в 13:21 +1300, Robin Paulson пишет:
hi,
i tried flashing the latest qtmoko last night - it flashed with no
errors, but then wouldn't boot. lots of errors
В Птн, 04/02/2011 в 13:59 +0100, David Garabana Barro пишет:
Hi
Just flashed qtmoko v31 in NAND.
It hangs on first boot with kernel panic:
UBIFS error (pid 1): mount_ubifs: 'compressor lzo is not compiled in
Kernel-panic - not syncing: VFS: Unable to mount root fs on onknown-block(0,0)
В Сбт, 05/02/2011 в 19:31 +0100, Radek Polak пишет:
Ivan Matveev wrote:
So everyone who installs QtMoko v31 to NAND and uses Qi shell have this
problem?
I am personally using this configuration and it works for me. I am wondering
why it thinks it's lzo. All qtmoko ubifs images are
В Птн, 04/02/2011 в 16:18 +0100, giacomo 'giotti' mariani пишет:
On 02/04/2011 16:08, community-requ...@lists.openmoko.org wrote:
Hi
Just flashed qtmoko v31 in NAND.
It hangs on first boot with kernel panic:
UBIFS error (pid 1): mount_ubifs: 'compressor lzo is not
Hi, guys.
I didn't actually tried new theme yet, but i have few idea about themes
is general :). I tried all themes from QTopia, all are not usable cause
they designed for smaller resolution screens, but i noticed interesting
thing that some themes include 3 buttons in bottom instead of 2, so i
В Пнд, 07/02/2011 в 09:42 +0100, cyberesp...@cyberesprit.fr пишет:
Hello,
I created 2 debs package for Faenqo :
https://cyberesprit.fr/faenqo/faenqo_fr.deb [fr version]
https://cyberesprit.fr/faenqo/faenqo_en.deb [en version]
If it helps..
Regards!
cyberesprit
It helped at least
В Вск, 06/02/2011 в 20:18 +0100, Radek Polak пишет:
Neil Jerram wrote:
Although I have nothing but admiration for the way that Radek and his
contributors have been shepherding and improving QtMoko, I haven't
actually tried it recently because I find the default look too dull.
But your
В Срд, 09/02/2011 в 16:17 +, David M. Danielsson пишет:
I can't reach the net from my OpenMoko GTA02 phone via GPRS, both in Always
online and When needed modes.
I'm currently using QtMoko v32 and Vodafone Italy is my provider (the apn is
mobile.vodafone.it on my Android phone).
В Срд, 09/02/2011 в 19:28 +0200, Timo Juhani Lindfors пишет:
Gennady Kupava g...@bsdmn.com writes:
3. Also sometimes session hangs (usually while heavy traffic, probably
due some bug in gsm chip), so you have to restart all pppd.
This is http://docs.openmoko.org/trac/ticket/2264 which has
Hi, David,
Actually nothing special in my version of u-boot, as you can see in
changelog, it has only few bug fixes.
Yes, splash should work, as reported by someone few months ago. Splash
simple copied from special flash partition into framebuffer, yes with
the line you pointed. So, it should
В Птн, 04/03/2011 в 22:16 +0100, Alfa21 пишет:
* new theme faenqo (cyberspirit)
nice, but how to lock the screen? :P
in pull-up menu on main screen, first item is screen lock
Gennady
___
Openmoko community mailing list
Guys, can i repeat my bug report?
In 'help', icon is absent for 'close' field (on right). It should be
easy to fix? I had big problems with that then i used qtmoko first time.
(it is frustrating to have no way to close 'help' which is first thing
many users open)
Gennady
В Сбт, 05/03/2011 в
hi,
You can install usb keyboard and use it. But sure, no need in 6 virtual
consoles on fr.
+1
Gennady
В Сбт, 05/03/2011 в 17:34 +0100, Alfa21 пишет:
hi community
I see in /etc/inittab we usually spawn 6 getty:
1:2345:respawn:/sbin/getty 38400 tty1
2:23:respawn:/sbin/getty 38400 tty2
Ok, changed close button to usual back arrow, now it's visible.
В Сбт, 05/03/2011 в 18:56 +0100, Francesco De Vita пишет:
Il 05/03/2011 16:30, Gennady Kupava ha scritto:
Guys, can i repeat my bug report?
In 'help', icon is absent for 'close' field (on right). It should be
easy to fix? I
В Пнд, 07/03/2011 в 13:47 -0200, Tiago Bortoletto Vaz пишет:
Hi Radek,
On Mon, 7 Mar 2011 06:52:46 +0100, Radek Polak wrote
Tiago Bortoletto Vaz wrote:
* I guess the bg images could be resized to get smaller
Patches welcome :)
Please take a look at
Hi, list.
Today I noticed the following change in SHR:
http://git.openembedded.org/cgit.cgi/openembedded/commit/?id=1516588acd3c4b4dd4add71d06ab8ce0d1bafa02
(by Denis 'GNUtoo' Carikli gnu...@no-log.org) and decided to lmbench it.
Here are results: http://www.bsdmn.com/lmbench/unwind_summary.txt
Hi,
I hope there is still some chances that Radek will change his dicision.
From my point of view where is no real need in FSO/qt gibrid, because of
following reasons:
1. qt stack has richer functionalily, better performance, and less bugs
than that FSO dbus/vala thing (don't throw rotten
В Птн, 01/04/2011 в 17:00 +0200, Ed Kapitein пишет:
On Friday 01 April 2011 14:52:02 David Matthews wrote:
I had a few problems with several uSD cards lately and i am trying to
figure out what is going wrong.
It used to be much more stable than it is now, i have massive file system
Hi, Radek all.
The ubifs has different options to decrease stability and decrease
performance, like disabling bulk read and enabling jffs-style
synchronous writes. I guess it's better to try em first.
Also i talk to ubifs guys on irc, they look like quite open to
questions, but first we need
I did it in other direction (freerunner as network headphones) and pulseaudio
performance were excellent, only thing you need is to select right
mixer, one without floating point calculations.
Other direction worked well too i think.
Only problem i faced after upgrade - it stopped working due to
В Птн, 05/08/2011 в 22:13 +0400, Dmitry Chistikov пишет:
Sebastian Reinhardt, Aug. 05, 2011, 19:20 +0200:
Am 05.08.2011 19:01, schrieb Xavier Cremaschi:
To save some space, You can copy whole directory /usr to sd-card and
create an symbolic link (ln -s path-to-sd-card/usr /usr). This can
Hi, Michael,
В Сбт, 24/09/2011 в 00:42 +, Michael Sokolov пишет:
Hello again,
As I was browsing through the Om community documentation, I saw a note
somewhere (I think it was somewhere in the wiki, but I have a hard time
finding it again) saying that the native NAND flash on the GTA02
Hi Michael,
If you purposefully lie to your comrade, that is in violation of
Communist ethics.
It's really rare to find Communists now, espesially rare to meet USSR
citizens.
But imagine how different are people in open source community. For me
most impressive were some man from Iran who
В Пнд, 17/10/2011 в 23:53 +0200, Radek Polak пишет:
Hi,
today i finally received my GTA04. After 2 hours i made case. Then compiled
kernel unpacked qtmoko v36 tar on SD card and it booted on first try to GUI.
After calibration and initial settings it didnt started because of modem, but
On Mon, 2012-01-16 at 00:26 +0100, Boudewijn wrote:
[log journey skipped]
Choosing the NAND/ubi-zlib boot option, there were some warnings, I
guess relating to running SHRs kernel on QtMoko. Anyway, QtMoko
booted!
Gennady, thank you! :-)
You welcome =)
Actually all is simple with this
http://groups.google.com/group/android-on-freerunner
On Thu, 2012-01-19 at 13:53 +0330, a dehqan wrote:
thanks AoF community.
do they have mailing list ?
On Thu, Jan 19, 2012 at 1:48 PM, Davide Scaini dsca...@gmail.com
wrote:
The answer is: it seems not to be possible.
Try
On Wed, 2012-02-01 at 08:08 +0100, Dr. H. Nikolaus Schaller wrote:
Here:
Last login: Wed Feb 1 06:58:19 2012 from 192.168.0.200
gta04:~# hdparm -t /dev/mmcblk0
/dev/mmcblk0:
Timing buffered disk reads: 56 MB in 3.09 seconds = 18.12 MB/sec
gta04:~#
So it appears that the SD
Hi, Nicolaus,
Actually detached keyboard is almost useless for phone. It is not
possible to use it any conditions expect then phone lays on some surface
and you not holding it.
This is because if you using one hand to hold phone, you have one one
hand free. Holding and using keyboard with one
On Thu, 2012-03-15 at 13:41 +0100, Dr. H. Nikolaus Schaller wrote:
And why not add some hooks or joints so that you can clip together both
parts after detaching them?
What would be ok for me!
But may be slider is not so complex? Put the battery and sim into lower
part, some rails and it is
101 - 150 of 150 matches
Mail list logo