On Fri, Feb 20, 2009 at 6:25 AM, Andraž 'ruskie' Levstik
rus...@codemages.net wrote:
:2009-02-20T11:50:Helge Hafting:
The kernel will always be hungry when you do gps logging, because the
processor must stay on in order to move coordinates from the gps
chip onto a file - once per second.
I just got my freerunner today and when I have been trying to flash it with
OM 2008.12 now that it is charged (comparing my Home and the images on the
wiki I don't even think it came with 2007 installed), according to
http://wiki.openmoko.org/wiki/Flashing I should not set up a usb0 connection
On Fri, Feb 20, 2009 at 10:50 PM, Shawn Trash Thompson
mokowa...@projektenterprises.com wrote:
Adam Jimerson wrote:
I just got my freerunner today and when I have been trying to flash it
with OM 2008.12 now that it is charged (comparing my Home and the
images on the wiki I don't even
On Fri, Feb 20, 2009 at 11:09 PM, Shawn Trash Thompson
mokowa...@projektenterprises.com wrote:
Adam Jimerson wrote:
On Fri, Feb 20, 2009 at 10:50 PM, Shawn Trash Thompson
mokowa...@projektenterprises.com
mailto:mokowa...@projektenterprises.com wrote:
Adam Jimerson wrote
On Sat, Feb 21, 2009 at 5:48 AM, Fernando Martins ferna...@cmartins.nlwrote:
Adam Jimerson wrote:
I just got my freerunner today and when I have been trying to flash it
with OM 2008.12 now that it is charged (comparing my Home and the
images on the wiki I don't even think it came with 2007
:
Adam Jimerson wrote:
My big problem is that the freerunner stays active for 30 seconds, but
dfu-util takes 3 minutes before it even tries to connect, by this time
it just spits out an error about how it can't find the device. I am
using the USB cable that came in the OM package, I
This may seem like a dumb question, that may have been asked before and I
just could not find where to search the archives of the list, but when I use
the installer program on my freerunner I get a error about how it can't
access the repo. Does the freerunner need to be connected to the wifi or
On Sat, Feb 21, 2009 at 6:35 PM, Yorick Moko yorickm...@gmail.com wrote:
to install programs you can either:
*download it on your host pc, scp it to the freerunner and install it
*connect the FR to the internet (usb/wifi/bluetooth...) and opkg
install something
*connect the FR to the
I am having some problems with opkg, first of all after flashing 2008.9 on
my phone wifi is working but it seems to have problems to connect to my
router which has mac filtering turned on (is this kind of network even
supported?). To get around this issue I connected to my freerunner to my PC
and
On Mon, Feb 23, 2009 at 2:53 AM, Gunnar AAstrand Grimnes
gunnar.grim...@dfki.de wrote:
Alternativly it's because you have both usb networking and wifi up and
the default route goes to usb which does not does not route you on to
the internet?
You can fix it with the route command, something
On Mon, Feb 23, 2009 at 7:41 PM, roguem...@roguewrt.org wrote:
Adam Jimerson wrote:
I got it to show up and I started to back it up but the phone shut off
for being in NOR boot for about 30 minutes, the Freerunner is the only
USB device connected to my computer and I did try other ports
I had several people complain that they can barely hear me during a phone call
on my freerunner. I can't run the latest version of the openmoko
dirstroburtion so I don't have the volume control but I can use alsamixer but
I don't know which channel is for the mix on the phone.
signature.asc
Lately my freerunner seems to have gotten more unstable, some of the things
that it is doing include:
1. Not wanting to fully connect during phone calls, it says it is connected
but I can't hear them and they can't hear me (this may be a problem with my
carrier, T-Moble sucks around here)
2. Sound
On Tue, Mar 3, 2009 at 10:47 AM, Helge Hafting helge.haft...@hist.nowrote:
Adam Jimerson wrote:
Lately my freerunner seems to have gotten more unstable, some of the
things that it is doing include:
1. Not wanting to fully connect during phone calls, it says it is
connected but I can't
4. GPS doesn't fully work, in the sets program that comes with FDOM it
takes a couple of minutes before it starts finding satelites but in
TangoGPS it never can find any even after 10+ minutes.
5. Installing/upgrading a program with opkg breaks it
I have expectecd problems like
On Tue, Mar 3, 2009 at 9:27 PM, Tim Dobson li...@tdobson.net wrote:
Adam Jimerson wrote:
I tried 2008.12 and my SIM card would not register so I can't use that.
Try SHR. My SIM card which won't work with 2009.12 and 2008.12
annoyingly works fine with it.
I flashed SHR on my phone
On Wed, Mar 4, 2009 at 5:12 AM, Helge Hafting helge.haft...@hist.no wrote:
Adam Jimerson wrote:
None of my contacts are on my SIM card and it would take forever to move
all of them onto it, the link the the script quoted is a dead link does
anyone have a correct link they can point me
I tried to upgrad TangoGPS one my SHR testing install because it didn't seem
like it was working, and fso-gpsd said that it was running, but when I tried
to do it even with -force-depens it removed the version the SHR testing came
with and gave me this error:
r...@om-gta02 ~ $ opkg -force-depends
I have an 8GB microSD card that I want to use to store GPS maps, I
have TangoGPS and Yaouh working on SHR-Testing but I don't know how
or if it is even possible to change this directory for both apps.
___
Openmoko community mailing list
On Saturday 14 March 2009 01:28:34 pm Patrick Beck wrote:
Hallo,
you can change it in the Config tab under repository information.
with kind regards
Patrick
Do I need to create a new repository for it? Every time I try and edit the
OSM repo changing the cache dir from /home/root/Maps to
On Mar 14, 2009, at 4:16 PM, Kosa wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Adam Jimerson escribió:
On Saturday 14 March 2009 01:28:34 pm Patrick Beck wrote:
Hallo,
you can change it in the Config tab under repository information.
with kind regards
Patrick
Do I need
Hi all,
I am getting several complaints about the buzzing from my phone, some people
are even answering my calls from my mobile number. I live in Tennessee area
in the USA and a bit far to have my phone shipped to Germany for the fix
party, mostly due to the amount of time I will be without a
On Sunday 05 April 2009 11:33:08 pm The Digital Pioneer wrote:
... I have never had trouble with it before, but
then I took a trip to Tennessee...
Maybe that is my problem with the buzz, looks like it is time to move XP
signature.asc
Description: This is a digitally signed message part.
I would also be interested in this, I am having a hard time finding someone
who is willing to even touch the gta02 even with the printed PDF that I was
reffed to because of the machine solder points on it
On Mon, Apr 13, 2009 at 2:05 PM, Lon Lentz lon.le...@gmail.com wrote:
Is anyone in the
In SHR Testing is it wise to do a opkg upgrade command, would it be
any different than what comes in the image that gets flashed on the
phone, basically if I were to flash a older release of SHR testing
onto my phone would opkg update opkg upgrade take me up to the
version that was
I'll third that, love the new UI and the settings, the phone is extremely
responsive now that Enlightenment is not the resource hog it use to be. The
biggest downside I have found is that no time and date in SMS, and the
accelerometer doesn't seem to work my test was with
On Tue, Apr 21, 2009 at 7:02 AM, Paul Fertser fercer...@gmail.com wrote:
Hi,
Why do you drop the list from Cc? There're more chances you'll get
answer from it than from me.
Sorry didn't mean to drop the list from Cc
On Tue, Apr 21, 2009 at 06:38:58AM -0400, Adam Jimerson wrote:
Thanks
On Wednesday 22 April 2009 09:22:31 am The Digital Pioneer wrote:
Ditto, Qemu's better for me. KVM FTW. :p
Yeah, you _can_ use VMWare images in Qemu, but they tend to not work right.
+1 for Qemu/KVM
As for my experience with VMWare images in Qemu they don't work at all.
signature.asc
Besides removing, or commenting out, the wlan0 configuration what else is
needed to switch eth0 back to being for the wireless instead of wireless?
After setting up wpa_supplicant and making the change I get an error about
how eth0 No such device, I can post any needed config files to help figure
On Thursday 23 April 2009 05:28:31 am arne anka wrote:
check udev, i got a rule making eth0 eth1 when eth0 already existed --
dunno what genius created that one.
Well it seems I managed to solve the device problem, after spending hours
messing with it breaking down sending a message to this
On Thursday 23 April 2009 03:42:52 am Ali wrote:
On Thu, 2009-04-23 at 10:29 +0300, Risto H. Kurppa wrote:
...
Hmm.. suppose this was not planned to be posted to community mailing
list..?
r
Did you stop to think that maybe this was a coded message for
terrorists? Just sayin.
No
I am looking for a app like the Dog Whistle for the iPhone that allows you
to set a pitch and it plays a note at the pitch, I looked in opkg.org and in
the application page in the wiki and didn't see one like that and was
wondering if there is one or if it would be a great suggestion for a app for
I mean like playing a tone, the same tone, but at different pitch like 67Hz
as an example
On Thu, Apr 23, 2009 at 11:17 AM, Nicola Mfb nicola@gmail.com wrote:
2009/4/23 Adam Jimerson vend...@gmail.com:
I am looking for a app like the Dog Whistle for the iPhone that allows
you
to set
I am using SHR so I don't know if there is anything like that for my phone.
On Thu, Apr 23, 2009 at 11:39 AM, Ali alish...@interchange.ubc.ca wrote:
On Thu, 2009-04-23 at 11:08 -0400, Adam Jimerson wrote:
I am looking for a app like the Dog Whistle for the iPhone that allows
you to set
Thanks that is what I was looking for, to bad there isn't a UI or anything
for it.
On Thu, Apr 23, 2009 at 12:18 PM, Stuart Pullinger
s.pullin...@elec.gla.ac.uk wrote:
Adam Jimerson wrote:
I mean like playing a tone, the same tone, but at different pitch like
67Hz as an example
It can
On Thursday 23 April 2009 07:29:46 am arne anka wrote:
you should be able, to determine the ap associated to by using the iwutils.
does it also happen, when you execute the dhclient manually?
It seems something is not right in my network interfaces is not right, iwlist
scan on both eth0 and
On Thursday 23 April 2009 06:46:05 pm Dale Maggee wrote:
Did you stop to think that maybe this was a coded message for
terrorists? Just sayin.
No according to this
http://www.adequacy.org/stories/2001.12.2.42056.2147.html they use Quake
for that XD
*PLEASE* Tell me that article is a
On Thursday 23 April 2009 08:57:33 pm c_c wrote:
Hi,
Yorick Moko wrote:
when i try to add my directory it always crashes to desktop
i get no error message whatsoever just a plain crash
it's just one folder with 100+ mp3s
Could you send me your /home/root/.intone/intone_songs.db? It's
On Friday 24 April 2009 05:49:48 am Al Johnson wrote:
On Friday 24 April 2009, Adam Jimerson wrote:
While we are on the subject of Intone, I don't know if this was already
brought up, but Intone shouldn't be able to adjust the FreeRunners volume
level, while adjusting Intone to a nice
?
On Thu, Apr 23, 2009 at 8:29 PM, Adam Jimerson vend...@gmail.com wrote:
On Thursday 23 April 2009 07:29:46 am arne anka wrote:
you should be able, to determine the ap associated to by using the
iwutils.
does it also happen, when you execute the dhclient manually?
It seems something
I don't have a udev rule like that here are the udev rules that I have
50-udev-default.rules 95-udev-late.rules
60-persistent-input.rules local.rules
60-persistent-storage-tape.rules permissions.rules
60-persistent-storage.rules run.rules
80-drivers.rules
Funny according to gmail it is the same thread, anyways when I did the grep
for wlan nothing was returned but eth returned this
r...@om-gta02 /etc/udev/rules.d $ grep -r eth /etc/udev/
/etc/udev/rules.d/50-udev-default.rules:SUBSYSTEM==aoe,
NAME=etherd/%k, GROUP=disk
On Fri, Apr 24, 2009 at 10:58 AM, arne anka openm...@ginguppin.de wrote:
/etc/udev/rules.d/50-udev-default.rules:SUBSYSTEM==aoe,
NAME=etherd/%k, GROUP=disk
well, that's not we are looking for.
next step: ist the driver built-in or loaded as module?
in case it is a module (which name?)
On Friday 24 April 2009 11:15:52 am arne anka wrote:
/etc/network/if-pre-up.d/wireless-tools
containing?
It is a bash script, to be nice to the list I posted the contents in pastebin
here http://pastebin.com/m6d6284f0
mine on my desktop does nowhere mention the string wlan.
do a grep
I am still trying to get my wireless to work on the 4/16 release of
SHR-Testing, I can get a scan to work on eth0 every now and then and the
rest of the time I get a device does not support scanning error. No
matter if I can scan or not eth0 will not connect to any AP. I have set up
the
and eth0!
But your troubles make me worry!
Hope anyone can help!
Matthias
Adam Jimerson schrieb:
I am still trying to get my wireless to work on the 4/16 release of
SHR-Testing, I can get a scan to work on eth0 every now and then and
the rest of the time I get a device does not support
Great game I just have one question, I know its not really related to the
game, but how can I keep my screen from blanking when it is running? It
does this on a lot of applications where it seems logical where the screen
should not blank out. Sorry to run this a bit off topic I just didn't like
On Tue, Apr 28, 2009 at 7:49 AM, Helge Hafting helge.haft...@hist.nowrote:
I have trouble with wifi in SHR testing too. I suspect a kernel problem.
I usually run wpa_supplicant. Failing that, I connect to WEP networks
using iwlist iwconfig commands directly. Even these low-level tools
fails
On Tue, Apr 28, 2009 at 8:15 AM, Nicola Mfb nicola@gmail.com wrote:
I ignored all these issues as before I used mainly BT networking and
USB, they works well with recent kernels, with olders BT stopped to
work after suspend/resume and with USB my laptop was often not able to
enumerate.
On Tue, Apr 28, 2009 at 9:38 AM, Helge Hafting helge.haft...@hist.nowrote:
Helge Hafting wrote:
Having low-level stuff like iwconfig fail is what makes me suspect a
kernel problem.
It is a kernel problem, because going back to the older kernel
If one does get organized will FR that have been shipped be accepted? I am
about to give up my look for shops/anyone with good amount of soldering
experience after almost giving one guy a heartattack when I shown him the
directions I had printed out.
On Wed, Apr 29, 2009 at 2:13 AM, Shawn
On Wed, Apr 29, 2009 at 10:43 AM, Nelson Castillo arhu...@freaks-unidos.net
wrote:
On Wed, Apr 29, 2009 at 3:16 AM, Helge Hafting helge.haft...@hist.no
wrote:
Nicola Mfb wrote:
2009/4/28 Helge Hafting helge.haft...@hist.no:
Helge Hafting wrote:
[..]
It is a kernel problem, because
Any one know if a ebook reader that works on SHR-Testing? I have tried
FBreader but it seems to be broken
* ERROR: Cannot satisfy the following dependencies for fbreader:
* gtk+-fastscaling (= 2.10.14) *
* Package enca md5sum mismatch. Either the opkg or the package index are
No I didn't, I didn't know it was in the SHR repo XD Its installed now
thanks
On Wed, Apr 29, 2009 at 2:01 PM, Johny Tenfinger seba.d...@gmail.comwrote:
Have you tried opkg install fbreader? :P
___
Openmoko community mailing list
The only books that I were not able to view in fbreader were in epub
format for some reason even though that is their format of choice.
On Apr 29, 2009, at 2:17 PM, Johny Tenfinger wrote:
On Wed, Apr 29, 2009 at 20:12, Russell Dwiggins
undrwa...@verizon.net wrote:
I recommend you use the
jeremy jozwik wrote:
so ive been having issues with time for some time now. ive set my
zoneinfo to the correct times zone [PST8PDT] but when i run the date
command i get back EDT. which is, oddly enough incorrect.
ive set the frameworkd.conf to not get any updates on timezone or
time.
I would think that is normal, my phone before I went to the
freerunner did that. It considered any call that I didn't answer a
missed call.
On May 2, 2009, at 12:39 AM, The Digital Pioneer wrote:
Quick bug report: if I hit the release button while the phone is
ringing, so as to reject
On Friday 01 May 2009 05:03:03 am Klaus 'mrmoku' Kurzmann wrote:
sorry... I just announced it on shr-user and not here.
Something went wrong with the testing build, so I moved it to -bad. To not
break mokos out in the wild.
see announcement here:
On Tuesday 05 May 2009 12:57:17 pm Sam Kuper wrote:
There are various standards that define the kinds/amount of EMI that an
electrical device must: (1) be able to cope with, and/or (2) not produce in
excess of.
It sounds like either your OM or your TV might not be fully compliant.
It
On Thu, May 7, 2009 at 11:43 AM, Daniel.Li lida_m...@163.com wrote:
Well, I'm going to travel next week. And I found that there is nothing
with OSM data (mountain area). And Google map looks fine :)
So I hope I can download some maps before I travel :)
I don't get a chance to play with
Has anyone noticed with the 05/02/2009 release of SHR-Testing that the battery
meter is not reading correctly? While taking a hike and doing some OSM
tracking I received a Low battery warning, thinking it was real I put an early
stop to it so I could get it charging before the battery dies but
How big of uSD card is needed to use the image to upgrade the GSM
Firmware?
On May 16, 2009, at 4:56 AM, Paul Fertser wrote:
pike pike-openm...@kw.nl writes:
The instructions on the Flashing page
http://wiki.openmoko.org/wiki/GSM/Flashing
sound very scary, and I am not inclined
to do that
On Saturday 16 May 2009 01:33:38 pm George Brooke wrote:
george-laptop~/openmoko/fluid☮:du -h flash-moko11-2.image
271Mflash-moko11-2.image
I think you'll need the 512meg one.
solar.george
Thanks, good thing I keep a hold of the 512MB one that came with my phone.
--
We must plan for
The Twitter feed said that a buzz rework is being coordinated for the
850Mhz freerunners? If this is the thread they were talking about I
would also be interested in sending my phone off to get buzz fixed,
not sure what the GPS fix is about (can someone give me more details
about this?) I
Radek Polak wrote:
Adam Jimerson wrote:
I use my phone on T-Mobile and get a lot of complaints
about the buzz/echo but I use it as my day to day phone anyways.
Hi Adam,
echo can be fixed by software. Any decent distribution should be
echo free by now (QTEI, SHR, OM2009
On Wednesday 20 May 2009 06:56:14 pm jeremy jozwik wrote:
not sure if this is the right area for feature requests but in getting
frustrated. under settings power the suspend sliders are silly small and
the sliding action rarely responds to your finger movements. i request that
the sliders
On Thursday 21 May 2009 06:15:33 am Risto H. Kurppa wrote:
On Thu, May 21, 2009 at 1:06 PM, Leonardo de Virgilio
fradev...@gmail.com wrote:
Great link r.h.k.!!
I've waited for fast-charging mode on new kernel for months!!
I'll try today ;)
It'd be great if someone had the energy to
On Thursday 21 May 2009 06:26:46 pm Vikas Saurabh wrote:
Check out
http://wiki.openmoko.org/wiki/GTA02_sysfs#GTA02_Kernel_sysfs_highlights_for
_kernel_2.6.28. specifically:
charger_type =
/sys/class/i2c-adapter/i2c-0/0-0073/pcf50633-mbc/chg_curlim #limit
that freerunner would accept
On Sunday 07 June 2009 10:50:48 am Yorick Moko wrote:
I find intone by far the best music app (low cpu usage); but I can't
find a way to route the audio through
Currently I use mplayer -ao alsa:device=bluetooth /mp3/
I would love it if this would be possible with intone.
Does anybody know a
On Wednesday 24 June 2009 06:21:49 pm Paul Fertser wrote:
Jon Levell openm...@coralbark.net writes:
Hum in landscape
When the phone is in landscape mode (really useful when typing with
Literki) there's a quiet but persistent hum.
This started to happen for me too. I
On Wednesday 24 June 2009 07:12:35 pm jeremy jozwik wrote:
pygtk-rotate, rotate, accel-rotate, NewRotate, TurnScreen, simple-rotate...
check
http://projects.openmoko.org/search/?type_of_search=softwords=rotateSearc
h=Search
Thanks for the reply, accel-rotate sounds great would love for it to
On Thursday 25 June 2009 05:09:52 am Rui Miguel Silva Seabra wrote:
On Wed, Jun 24, 2009 at 07:05:20PM -0400, Adam Jimerson wrote:
On Wednesday 24 June 2009 06:21:49 pm Paul Fertser wrote:
Jon Levell openm...@coralbark.net writes:
Hum in landscape
When the phone
I am looking for where I can buy accessories for my FreeRunner here in the US,
TuxBrain has a couple that I am interested in, the leather case and the
invisible shield, but they seem to be european based and would rather not pay
any kind of fees that would go with it if they do ship to the US.
On Saturday 27 June 2009 04:44:00 am Christoph Pulster wrote:
I am looking for where I can buy accessories for my FreeRunner in US
I stock 17 different accessories for the Freerunner.
Based in Germany, but we ship worldwide for 30 EUR flat rate.
Customers outside EU Europe get 19% VAT
I have just noticed the opposite problem, I am unable to get shr-
unstable to auto suspend. Going to shr settings - Power and using
the slider for the auto suspend to try an enable it does not work,
when I drag it, the slider just goes back to disabled no matter how
many times I try it or
Sean Moss-Pultz wrote:
On Sat, Jun 27, 2009 at 3:06 AM, Adam Jimersonvend...@gmail.com wrote:
I am looking for where I can buy accessories for my FreeRunner here in the
US,
TuxBrain has a couple that I am interested in, the leather case and the
invisible shield, but they seem to be european
Hello I have been using Dates on SHR, installed from the SHR feeds, for a
while now but I have just recently noticed a problem with it. The day that
it thinks it is is off by +1, what I mean is according to the SHR the date
is 07/07/2009 (which is correct for another hour) but dates says that it
On Wednesday 08 July 2009 01:50:04 am jeremy jozwik wrote:
its no minor bug. in the PST8PDT timezone the day would get switched
after 6 pm. which is completely unhelpful. i put an email on the
pimlico mailing list and have no response in over 2 months. have since
switched to gpe-calendar
I
On Wednesday 08 July 2009 03:11:49 pm Jeff Sadowski wrote:
On Wed, Jul 8, 2009 at 1:05 PM, Adam Jimersonvend...@gmail.com wrote:
On Wednesday 08 July 2009 01:50:04 am jeremy jozwik wrote:
its no minor bug. in the PST8PDT timezone the day would get switched
after 6 pm. which is completely
On Wednesday 08 July 2009 03:14:20 pm jeremy jozwik wrote:
what distro? ive noticed after a suspend on shr-unstable atd gets
messy. so i go into shr-settings and restart the atd deamon and all is
well.
I'm using shr-unstable, that is why I have [SHR-unstable] in the subject, both
ffalrams
On Thursday 09 July 2009 12:54:15 am Ben Wong wrote:
Mickey: It seems a very bad idea to default to maximum volume if it
causes distortion. I'm not sure yet that that's the sole audio
problem in SHR-unstable, but I can say that when I turned the speaker
volume down to what it was in
On Thursday 09 July 2009 11:45:46 am jeremy jozwik wrote:
on 20090624 it starts, just takes about 4 min for the system to sort
its self out.
if i try to do anything shr-settings related before the screen auto
dimms for the first time is usually get a service not running
I have been having
On Thursday 09 July 2009 12:17:45 pm Ben Wong wrote:
On Wed, Jul 8, 2009 at 11:03 PM, Adam Jimersonvend...@gmail.com wrote:
On Thursday 09 July 2009 12:54:15 am Ben Wong wrote:
mdbus -s org.freesmartphone.ogsmd /org/freesmartphone/GSM/Device
org.freesmartphone.GSM.Device.SetSpeakerVolume
On Wednesday 08 July 2009 10:07:15 pm jeremy jozwik wrote:
Hi,
I'm running the latest Intone from the shr feeds
intone - 0.0.1+svnr22-r7 -
and when I tried to run it it has a segmentation fault, is there anything
different between the version in the feed and the one on opkg.org or is it
On Thursday 09 July 2009 04:42:58 pm swap38 wrote:
Adam Jimerson a écrit :
I am looking for where I can buy accessories for my FreeRunner here in
the US, TuxBrain has a couple that I am interested in, the leather case
and the invisible shield, but they seem to be european based and would
On Friday 10 July 2009 09:57:23 am c_c wrote:
/home/root/.intone/intone-songs.db
Ah that helped me find the problem ~/.intone/intone-songs.db did not exist
after the upgrade for some reason I had to remove the entire .intone directory
but now it is working thanks
--
We must plan for freedom,
On Wednesday 08 July 2009 09:21:17 pm W.Kenworthy wrote:
On Wed, 2009-07-08 at 15:05 -0400, Adam Jimerson wrote:
On Wednesday 08 July 2009 01:50:04 am jeremy jozwik wrote:
its no minor bug. in the PST8PDT timezone the day would get switched
after 6 pm. which is completely unhelpful. i put
Petr Vanek wrote:
On Tue, 14 Jul 2009 11:22:43 +0400
Paul Fertserfercer...@gmail.com (PF) wrote:
The Digital Pioneerdigitalpion...@gmail.com writes:
BTW, have you tried disabling esco or not?
Give me a command to run or a conffile to edit, or a page of
instructions to follow and I'll do
On Tuesday 14 July 2009 06:58:45 pm Steven King wrote:
On Tuesday 14 July 2009 12:28:47 The Digital Pioneer wrote:
Confirming again, I have my headset working perfectly after uncommenting
the line Paul mentioned and rebooting. :D
After following the latest instructions in the wiki,
David Ford wrote:
hmm, perhaps the phone should ping the BT earpiece and see if it's
available before assuming it is :D
That should work, at this point right now to go from BT headset to
phone, the user needs to restart the phone with the headset off.
Adam Jimerson wrote:
Yes thanks
The Digital Pioneer wrote:
Reboot with the headset off? If that works, then why couldn't you just
restart a few services (ophonekitd, frameworkd and the like)?
I could if I knew what services need to be restarted exactly, I had to
do a reboot then anyways so that would have been easier than
Anyone else have no ring tone on incoming SMS with the latest SHR Unstable?
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
On Thursday 16 July 2009 08:37:15 am Sebastian Krzyszkowiak wrote:
On 7/16/09, c_c cchan...@yahoo.com wrote:
Hi
If you were using notify_message.mp3 - it's no longer there in
/usr/share/sounds. Select another one - or copy it back from an old
tarball. HTH
It is there, but as
On Sunday 19 July 2009 12:03:24 am c_c wrote:
Hi,
Well, after quite a few tweaks - here is the latest version of Intone.
Changes :-
* (hopefully) better top bar in playlist view
* change priority from gui
* change playing song icon to play in list
* fixes to better support logical order
I want to test out Android on my freerunner but I don't want to blow away my
working SHR install. I have a 2 gig microSD card that is free and can be used
my question is grabbing the .tar.gz from koolu [1] according the to directions
on the openmoko wiki [2] all I need to do?
[1]
xChris wrote:
Hi,
This version 'auto installs' the Android on the device (flash).
I just killed my working SHR , in order to test it..
This version has some improvements but its still slow (in my opinion: non
usable) (my SIM card is ok but I can't make /receive calls)
Chris
Thanks for
On Friday 24 July 2009 06:56:22 pm Sebastian Krzyszkowiak wrote:
That's Linux box which fits in your pocket. You can do
everything.
Except for charging while it is off, but that is a different story XP
--
We must plan for freedom, and not only for security, if for no other reason
than only
On Saturday 25 July 2009 08:06:48 am arne anka wrote:
iirc there's a tool called ffalarm to handle exact that case.
Only downsides to using ffalram for this first no reoccurring alarm support
yet and second there is no way to add a note or any kind of message reminding
you why the alarm is
On Saturday 25 July 2009 08:41:52 pm Robin Paulson wrote:
2009/7/26 Adam Jimerson vend...@gmail.com:
Only downsides to using ffalram for this first no reoccurring alarm
support yet and second there is no way to add a note or any kind of
message reminding you why the alarm is going off
On Saturday 25 July 2009 04:36:26 pm Rask Ingemann Lambertsen wrote:
On Fri, Jul 24, 2009 at 07:02:32PM -0400, Adam Jimerson wrote:
On Friday 24 July 2009 06:56:22 pm Sebastian Krzyszkowiak wrote:
That's Linux box which fits in your pocket. You can do
everything.
Except for charging
1 - 100 of 141 matches
Mail list logo