Re: Navit problem?
On Monday 11 April 2011 17:19:57 Sven Hartrumpf wrote: Mon, 11 Apr 2011 11:02:07 +0200, psonek2 wrote: http://qtmoko.sourceforge.net/download/Xglamo.deb Is there a difference between the above file and the one from the debian repository? Xglamo is small embedded version. It's very small (~1MB) and similar e.g. to Xfbdev [1] except that it supports glamo. xserver-xorg-video-glamo is glamo driver for full Xorg server. It's included in debian [2] Regards Radek [1] http://packages.debian.org/squeeze/xserver-xfbdev [2] http://packages.debian.org/en/squeeze/xserver-xorg-video-glamo ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Navit problem?
Gilles Filippini pini at debian.org writes: Hrabosh a écrit , Le 10/04/2011 19:36: Navit seems to run, but it is bigger than the screen (I can!t see part of the Navit keyboard, etc.) and I don!t have any Navit icon in QX. I can hardly help you further since I don't use the qtmoko distro. But you may want take a look at the wiki pages to find out how to fine tune your configuration using the navit.xml file: http://wiki.navit-project.org/ _g. ___ Openmoko community mailing list community at lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community Hi everybody, freshly installed qtmoko_v35 on nand on a freerunner and tried 1) to install navit via apt-get: doesn't work (apt-get didn't install the navit.xml for example) 2) to install it via openmobile-zip file. After the map-configuration it starts, I even get a map, but the gps doesn't work. Starting NeronGPS simultaneously gives me a gps-signal on Neron but nor on Navit. I dont get any routing as well. Did anybody succeed in apt-get install navit ? Or is openmobile the only and old-fashioned way ? Where can I see the output from QX/navit ? Oh gosh, QTmoko is really nice but without Navit . Greetings, Nick ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Navit problem?
Mon, 11 Apr 2011 06:31:24 + (UTC), calypso wrote: 1) to install navit via apt-get: doesn't work (apt-get didn't install the navit.xml for example) Debian puts navit.xml into /etc/navit/ Did anybody succeed in apt-get install navit? I still have no X running because I don't know which packages are needed for Xglamo ... Ciao Sven ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Navit problem?
On Sunday 10 April 2011 11:10:24 Carsten Gerlach wrote: Wich packages do I have to install for Xglamo? A apt-cache search glamo gives only the result xserver-xorg-video-glamo - X.Org X server -- SMedia Glamo display driver I have installed this package, but the X server is not starting. http://qtmoko.sourceforge.net/download/Xglamo.deb Btw it should be as simple as this: * install qtmoko (v35) * start qx * click the button start and when asked choose Xglamo * wait until everything is installed * xserver with xterm should start * twice press AUX to end it If you want more apps (like navit): * from shell do apt-get install navit * run qx * choose Favourites in menu * if the package installs .desktop file to /usr/share/application it will have icon there, so click it to enable it * you can use menu-Settings on the application list item to adjust settings like window manager. * if the app does not have .desktop file you can launch xterm and start it from there Regards Radek ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Navit problem?
On Sunday 10 April 2011 19:36:00 Hrabosh wrote: Then I installed Xglamo and Navit seems to run, but it is bigger than the screen (I can!t see part of the Navit keyboard, etc.) and I don!t have any Navit icon in QX. Please check QX-Menu-Favourites and enable navit from there - it should work if navit installs /usr/share/applications/navit.deskop The screen could be fixed if you enable window manager in application settings. Current QX window manager is quite simple, you might need to use matchbox for more complex things. Regards Radek ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Navit problem?
Sven Hartrumpf a écrit , Le 11/04/2011 08:50: I still have no X running because I don't know which packages are needed for Xglamo ... This question has been answered already: xserver-xorg-video-glamo _g. signature.asc Description: OpenPGP digital signature ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Navit problem?
Mon, 11 Apr 2011 15:20:48 +0200, pini wrote: Sven a écrit , Le 11/04/2011 08:50: I still have no X running because I don't know which packages are needed for Xglamo ... This question has been answered already: xserver-xorg-video-glamo Thanks for your patience. This worked and automatically installed the following packages: keyboard-configuration libaudit0 libdrm2 libpciaccess0 libxkbfile1 x11-xkb-utils xkb-data xserver-common xserver-xorg xserver-xorg-core xserver-xorg-input-all xserver-xorg-input-evdev xserver-xorg-input-synaptics xserver-xorg-input-wacom xserver-xorg-video-glamo Sven ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Navit problem?
Mon, 11 Apr 2011 11:02:07 +0200, psonek2 wrote: http://qtmoko.sourceforge.net/download/Xglamo.deb Is there a difference between the above file and the one from the debian repository? Btw it should be as simple as this: ... Thanks for the detailed steps. X works ok now (with Xglamo from the repository). Sven ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Navit problem?
Radek Polak píše v Po 11. 04. 2011 v 13:28 +0200: On Sunday 10 April 2011 19:36:00 Hrabosh wrote: Then I installed Xglamo and Navit seems to run, but it is bigger than the screen (I can!t see part of the Navit keyboard, etc.) and I don!t have any Navit icon in QX. Please check QX-Menu-Favourites and enable navit from there - it should work if navit installs /usr/share/applications/navit.deskop Yes, it works! The screen could be fixed if you enable window manager in application settings. Current QX window manager is quite simple, you might need to use matchbox for more complex things. Yes, it works too! I've checked: Prevent suspending Use window manager Enable GPS module Fullscreen And Navit now seems to run properly. I just need to play with navit.xml to set correct maps, etc. Thank you !! Hrabosh Regards Radek ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Navit problem?
Hello, Am Montag 11 April 2011 schrieb Radek Polak: Btw it should be as simple as this: [step by step instructions] Thanks for this good description, now it works! :-) Greetings, Carsten ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Navit problem?
Sat, 9 Apr 2011 14:58:08 +0200, psonek2 wrote: When I started QX from the GUI I had to install an X server. Which one is recommended? (Xorg or Xglamo?) I would go for Xglamo - it's very small (~1MB) and well tested. Thanks for your recommendation. I have tested it on fresh v35 install and i worked just fine. Where to find the package (the package does not seem to have an obvious name)? The only one I found is: xserver-xorg-video-glamo Ciao Sven ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Navit problem?
Hello, I have the same problems as Sven, so sorry for hijacking this thread. Am Samstag 09 April 2011 schrieb Radek Polak: Sven Hartrumpf wrote: When I started QX from the GUI I had to install an X server. Which one is recommended? (Xorg or Xglamo?) I would go for Xglamo - it's very small (~1MB) and well tested. I have tested it on fresh v35 install and i worked just fine. Wich packages do I have to install for Xglamo? A apt-cache search glamo gives only the result xserver-xorg-video-glamo - X.Org X server -- SMedia Glamo display driver I have installed this package, but the X server is not starting. I tried both, but with no success (I saw Raptor install packages, but no error message; it could be that the root fs is full now). So, I tried apt-get install xserver-xorg which worked, but starting xterm (or navit) from QX leads to: Unable to connect to X server If you try runningX from command line does it work? Maybe uninstall the xserver-xorg (or remove /usr/bin/X) and QX should use Xglamo automatically. A start of X gives the error Failed to load module fbdev So I installed the package xserver-xorg-video-fbdev Now the error was: (EE) AIGLX error: dlopen of /usr/lib/dri/swrast_dri.so failed (/usr/lib/dri/swrast_dri.so: cannot open shared object file: No such file or directory) (EE) GLX: could not load software renderer After the installing libxcb-glx0 libgl1-mesa-swx11 libgl1-mesa-dri I get no error messages, only this output root@neo:~# X X.Org X Server 1.7.7 Release Date: 2010-05-04 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.31-rc9 armv5tel Debian Current Operating System: Linux neo 2.6.34-qtmoko #1 Tue Mar 29 19:36:17 UTC 2011 armv4tl Kernel command line: loglevel=4 console=tty0 console=ttySAC2,115200 init=/sbin/init ro mtdparts=physmap-flash:-(nor);neo1973- nand:0x0004(qi),0x0004(depr-ub- env),0x0080(kernel),0x000a(depr),0x0004(identity- ext2),0x0f6a(rootfs) g_ether.dev_addr=00:1F:11:01:55:3F g_ether.host_addr=00:1F:11:01:55:40 root=/dev/mmcblk0p1 rootdelay=1 console=tty0 loglevel=3 rootwait Build Date: 19 February 2011 03:00:40PM xorg-server 2:1.7.7-13 (Cyril Brulebois k...@debian.org) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Sun Apr 10 11:03:15 2011 (==) Using system config directory /usr/share/X11/xorg.conf.d Primary device is not PCI SELinux: Disabled on system, not enabling in X server The screen becomes black and after clicking on the screen the graphic is redrawn. But a start of navit gives the old message root@neo:~# navit navit:main_init:Warning: LC_ALL is set, this might lead to problems (e.g. strange positions from GPS) map_rect_new_textfile unable to open textfile /root/.navit/bookmark.txt (unknown:1081): Gtk-WARNING **: cannot open display: Greetings, Carsten -- ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Navit problem?
If you are connected via SSH, you need to set DISPLAY variable first. Something like: root@neo:~# DISPLAY=:0.0 navit may work... Hrabosh Carsten Gerlach píše v Ne 10. 04. 2011 v 11:10 +0200: Hello, I have the same problems as Sven, so sorry for hijacking this thread. Am Samstag 09 April 2011 schrieb Radek Polak: Sven Hartrumpf wrote: When I started QX from the GUI I had to install an X server. Which one is recommended? (Xorg or Xglamo?) I would go for Xglamo - it's very small (~1MB) and well tested. I have tested it on fresh v35 install and i worked just fine. Wich packages do I have to install for Xglamo? A apt-cache search glamo gives only the result xserver-xorg-video-glamo - X.Org X server -- SMedia Glamo display driver I have installed this package, but the X server is not starting. I tried both, but with no success (I saw Raptor install packages, but no error message; it could be that the root fs is full now). So, I tried apt-get install xserver-xorg which worked, but starting xterm (or navit) from QX leads to: Unable to connect to X server If you try runningX from command line does it work? Maybe uninstall the xserver-xorg (or remove /usr/bin/X) and QX should use Xglamo automatically. A start of X gives the error Failed to load module fbdev So I installed the package xserver-xorg-video-fbdev Now the error was: (EE) AIGLX error: dlopen of /usr/lib/dri/swrast_dri.so failed (/usr/lib/dri/swrast_dri.so: cannot open shared object file: No such file or directory) (EE) GLX: could not load software renderer After the installing libxcb-glx0 libgl1-mesa-swx11 libgl1-mesa-dri I get no error messages, only this output root@neo:~# X X.Org X Server 1.7.7 Release Date: 2010-05-04 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.31-rc9 armv5tel Debian Current Operating System: Linux neo 2.6.34-qtmoko #1 Tue Mar 29 19:36:17 UTC 2011 armv4tl Kernel command line: loglevel=4 console=tty0 console=ttySAC2,115200 init=/sbin/init ro mtdparts=physmap-flash:-(nor);neo1973- nand:0x0004(qi),0x0004(depr-ub- env),0x0080(kernel),0x000a(depr),0x0004(identity- ext2),0x0f6a(rootfs) g_ether.dev_addr=00:1F:11:01:55:3F g_ether.host_addr=00:1F:11:01:55:40 root=/dev/mmcblk0p1 rootdelay=1 console=tty0 loglevel=3 rootwait Build Date: 19 February 2011 03:00:40PM xorg-server 2:1.7.7-13 (Cyril Brulebois k...@debian.org) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Sun Apr 10 11:03:15 2011 (==) Using system config directory /usr/share/X11/xorg.conf.d Primary device is not PCI SELinux: Disabled on system, not enabling in X server The screen becomes black and after clicking on the screen the graphic is redrawn. But a start of navit gives the old message root@neo:~# navit navit:main_init:Warning: LC_ALL is set, this might lead to problems (e.g. strange positions from GPS) map_rect_new_textfile unable to open textfile /root/.navit/bookmark.txt (unknown:1081): Gtk-WARNING **: cannot open display: Greetings, Carsten ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Navit problem?
Carsten Gerlach a écrit , Le 10/04/2011 11:10: A start of X gives the error Failed to load module fbdev What is in your xorg.conf file? Here is mine: pini@debian-gta02:~$ cat /etc/X11/xorg.conf # Xorg configuration for an Openmoko FreeRunner Section InputClass Identifier Clic droit MatchIsTouchscreen on Option EmulateRightButton1 EndSection Section Device Identifier Configured Video Device Driver glamo # Driver fbdev EndSection _g. signature.asc Description: OpenPGP digital signature ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Navit problem?
Sven Hartrumpf píše v So 09. 04. 2011 v 12:11 +0200: Hi. Fri, 08 Apr 2011 21:26:31 +0200, pini wrote: I am trying Navit for the first time and followed these instructions: http://wiki.openmoko.org/wiki/QtMoko#Navit_Installation Works fine, but after the suggested reboot, I just see Enter PIN the press Unlock (no numbers field as usual). The screen and the buttons do not react in any way. I had to flash again :-( IIUC qtmoko is based on Debian. Why not install Because I trusted the Wiki page :-) Could someone knowledgable update the Navit section, please? (OK, _if_ I get Navit working (see below), I could do this myself.) Navit from the appropriate Debian repository? OK. I tried this now. The following works without adjusting repositories: apt-get install navit I did the same. Also gpsd should be installed. Then I installed Xglamo and Navit seems to run, but it is bigger than the screen (I can!t see part of the Navit keyboard, etc.) and I don!t have any Navit icon in QX. When I started QX from the GUI I had to install an X server. Which one is recommended? (Xorg or Xglamo?) I tried both, but with no success (I saw Raptor install packages, but no error message; it could be that the root fs is full now). So, I tried apt-get install xserver-xorg which worked, but starting xterm (or navit) from QX leads to: Unable to connect to X server Ciao Sven ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Navit problem?
Hrabosh a écrit , Le 10/04/2011 19:36: Navit seems to run, but it is bigger than the screen (I can!t see part of the Navit keyboard, etc.) and I don!t have any Navit icon in QX. I can hardly help you further since I don't use the qtmoko distro. But you may want take a look at the wiki pages to find out how to fine tune your configuration using the navit.xml file: http://wiki.navit-project.org/ _g. signature.asc Description: OpenPGP digital signature ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Navit problem?
Hello, Am Sonntag 10 April 2011 schrieb Gilles Filippini: Carsten Gerlach a écrit , Le 10/04/2011 11:10: A start of X gives the error Failed to load module fbdev What is in your xorg.conf file? I didn't have this file. So I created it with your template and after a reboot the known error at starting navit Gtk-WARNING **: cannot open display: is gone. Navit starts (the background color occurs), but it directly gets frozen. And if you click on the screen, the desktop becomes visible step by step. By the way this happens only if i start navit in the terminal on the neo directly. If I want to start it over a ssh session from my laptop I get the well nown error: root@neo:~# navit navit:main_init:Warning: LC_ALL is set, this might lead to problems (e.g. strange positions from GPS) map_rect_new_textfile unable to open textfile /root/.navit/bookmark.txt (unknown:1388): Gtk-WARNING **: cannot open display: It is possible to start a program over ssh on an other device? Thanks, Carsten ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Navit problem?
Hi. Fri, 08 Apr 2011 21:26:31 +0200, pini wrote: I am trying Navit for the first time and followed these instructions: http://wiki.openmoko.org/wiki/QtMoko#Navit_Installation Works fine, but after the suggested reboot, I just see Enter PIN the press Unlock (no numbers field as usual). The screen and the buttons do not react in any way. I had to flash again :-( IIUC qtmoko is based on Debian. Why not install Because I trusted the Wiki page :-) Could someone knowledgable update the Navit section, please? (OK, _if_ I get Navit working (see below), I could do this myself.) Navit from the appropriate Debian repository? OK. I tried this now. The following works without adjusting repositories: apt-get install navit When I started QX from the GUI I had to install an X server. Which one is recommended? (Xorg or Xglamo?) I tried both, but with no success (I saw Raptor install packages, but no error message; it could be that the root fs is full now). So, I tried apt-get install xserver-xorg which worked, but starting xterm (or navit) from QX leads to: Unable to connect to X server Ciao Sven ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Navit problem?
Sven Hartrumpf wrote: When I started QX from the GUI I had to install an X server. Which one is recommended? (Xorg or Xglamo?) I would go for Xglamo - it's very small (~1MB) and well tested. I have tested it on fresh v35 install and i worked just fine. I tried both, but with no success (I saw Raptor install packages, but no error message; it could be that the root fs is full now). So, I tried apt-get install xserver-xorg which worked, but starting xterm (or navit) from QX leads to: Unable to connect to X server If you try runningX from command line does it work? Maybe uninstall the xserver-xorg (or remove /usr/bin/X) and QX should use Xglamo automatically. Regards Radek ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Navit problem?
Sven Hartrumpf a écrit , Le 08/04/2011 17:50: Hi all. (This is on a freerunner with qtmoko v35.) I am trying Navit for the first time and followed these instructions: http://wiki.openmoko.org/wiki/QtMoko#Navit_Installation Works fine, but after the suggested reboot, I just see Enter PIN the press Unlock (no numbers field as usual). The screen and the buttons do not react in any way. What to do now? IIUC qtmoko is based on Debian. Why not install Navit from the appropriate Debian repository? _g. signature.asc Description: OpenPGP digital signature ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
