I would also be interested in a browser for 6. Very interested
--
Compact Macs is sponsored by http://lowendmac.com/.
Support Low End Mac http://lowendmac.com/lists/support.html
Compact Macs list info: http://lowendmac.com/lists/compact.shtml
-- AOL users, remove mailto:;
Send list
I also would be interested in having a System 6 browser that runs on a Classic.
I don't know if I can help - I have 20 years experience in programming, but only
in the Apple II (both DOS and ProDOS) and DOS/Windows platforms (no Macintosh up
this time). Anyway, I know the Pascal programming
On Thursday, Jul 31, 2003, at 21:00 Europe/Amsterdam, Compact Macs
wrote:
Message-Id: [EMAIL PROTECTED]
In-Reply-To: [EMAIL PROTECTED]
Date: Thu, 31 Jul 2003 14:30:06 +0200
From: Marten van de Kraats [EMAIL PROTECTED]
Subject: Re: SE/30 Ethernet Problems.
I suppose you installed OT 1.1.2 and
well, I bought a IIsi / SE30 ethernet card off ebay, and when I plug it into my SE/30
I get a very scrabled screen, when I remove the card the computer works fine, I think
the ethernet card has a FPU on it, from reading recent posts, shoudl I remove this
and it should work? I am very
On Friday, August 1, 2003, at 09:35 PM, Joe wrote:
well, I bought a IIsi / SE30 ethernet card off ebay, and when I plug
it into my SE/30 I get a very scrabled screen, when I remove the card
the computer works fine, I think the ethernet card has a FPU on it,
from reading recent posts, shoudl I
From: [EMAIL PROTECTED]
Subject: Re: Diimo upgrade
Date: Thu, 31 Jul 2003 15:59:26 -0700
I was referring to the right angle adapter card that is typically used with
ethernet cards on the IIsi. It has several chips on it including an fpu.
Are you, perhaps, referring to the NuBus adapter for the
There was another adapter that has a pds pass through, that I have several
of, from machine part outs. I also have the daystar adapter for the IIX that
plugs into the cpu socket. My SE/30 has a removable cpu. Is this adapter too
electrically different to use on the SE/30?
-Original
I suppose you installed OT 1.1.2 and the most recent compatible Apple
Share Client software
No Marten, I had OP 1.1.1 installed but downloaded OT 1.1.2 and
shall replace the former.
The Asante warranty was new for me. I will email them Monday and see
what their response is.
The most recent Apple
At 1:52 PM -0700 8/1/2003, Snook, John R wrote:
well, I bought a IIsi / SE30 ethernet card off ebay, and when I
plug it into my SE/30 I get a very scrabled screen, when I remove
the card the computer works fine, I think the ethernet card has a
FPU on it, from reading recent posts, shoudl I
At least some of these cards have jumpers for three different
addresses and not all seem to work so try each address. The
addresses are usually denoted as C, D E, IIRC.
Note that the address selection shouldn't prevent booting however.
Clark Martin
Clark, I beg to differ. Address $0E, as shown
My Reply follows quote. On 01/08/2003 19:04 [EMAIL PROTECTED]
said:
Hi Everyone:
You may remember me. I have the Mac SE that will not boot up. I get the
disk with the question mark in the middle. I did try one suggestion. I
covered the hole where there was not protector on the 1.4 Mb
on 8/1/03 6:04 PM, [EMAIL PROTECTED] at [EMAIL PROTECTED]
wrote:
Hi Everyone:
You may remember me. I have the Mac SE that will not boot up. I get the
disk with the question mark in the middle. I did try one suggestion. I
covered the hole where there was not protector on the 1.4 Mb disk
12 matches
Mail list logo
