Have them run all new cable. Many less problems plus you can track
down any problems that prevent service. As it is all new.
Stewart
At 01:48 PM 10/26/2008, you wrote:
questions:
i have a wire from pole to house that is over 15 years old just sitting
there unused ...should I make them put
Does the NAS drive have an IP address?
Have you tried mapping the drive directly to the shared folder at the IP
address?
- Original Message -
From: "b_s-wilk" <[EMAIL PROTECTED]>
To:
Sent: Sunday, October 26, 2008 1:30 PM
Subject: [CGUYS] Hawking NAS drive
Can't access network dr
Furthermore, I have been googling around and find there is a "not our
problem" round robin where netgear says it's comcast's problem and vice
versa ...further, there are over 100 posts for the linksys item largely
negative ...of course, people don't tend to post positives as much, do they?
...I jus
If the HD is set to "cable select" (CS), then the Zip drive has to be
set the same way. If the HD is set to "master", then the zip drive has
to be "slave).
Mike
rlsimon wrote:
I got the new maxtor drive in and restored the image using EZGigII software
which worked just fine ...however, the th
Another question on web cams, specifically the iSight camera (not the
built in version, but rather the one that magnetically attaches to the
top if the iMac). Is there a way to see it outside of using iChat? I
can't find anything that's asking for one. I'd like something that
would allow m
Congratulations Jeff for being so responsible. So why doesn't the rest
of the business community and government do this? To me, internal
information should always remain internal, especially given the number
of business traveler's laptops that "disappear".
Richard P.
On Sun, Oct 26, 2008 at 1:42
>...with dsl equivalent speed comcast cable service 768kbps or does it
>require 6mbps to go?
It will work if you set your frame rate low enough. Figure each frame
will be about 500kb and that you won't really get 768kbps. So 1 frame per
second should work. (Until Comcast caps you.)
***
http://media2.comcast.net/anon.comcastonline2/support/help/misc/cmclist1.htm
#n shows approved list ...what else?
-Original Message-
From: gerald [mailto:[EMAIL PROTECTED]
Sent: Saturday, October 25, 2008 4:32 PM
Subject: Re: what router?
i did not know komkast had modem/routers.
if you
At 01:30 PM 10/26/2008, rlsimon wrote:
>I got the new maxtor drive in and restored the image using EZGigII software
>which worked just fine ...however, the thing won't see my internal iomega
>zip 100 drive ...downloaded the latest driver package for it ...still
>doesn't see it ...rebooted and still
Hi...help me out with this MIMO thing ...which ones do I need to get for
that? I have been looking at netgear CG814M and linksys wcg200 because they
are gateway/router/wireless all in one and comcast says they work with their
stuff but I don't see any MIMO mentioned...
-Original Message-
...with dsl equivalent speed comcast cable service 768kbps or does it
require 6mbps to go?
*
** List info, subscription management, list rules, archives, privacy **
** policy, calmness, a member map, and more at http://www
I had updated the Netgears a couple times and would see improvements in
some ways.
When I hooked up the D-Link to my Komcast it worked great. I updated the
firmware on it right away with no problem. It seems to me that most
makers of updatable devices always ship with the original software versi
questions:
i have a wire from pole to house that is over 15 years old just sitting
there unused ...should I make them put a new one up?
i have coaxial cable to the rooms with TVs (2) and room with 2nd TV has the
computer ...will that coax (also about 15+ years old but working fine with
40' tower
>so far take seems to be equal but the ability to flash the
>firmware looks good for the netgear one ...waddaY'all say2that?
The ability to flash the firmware will extend the useful life of your
purchase by taking care of bugs and future hacks. A good idea.
But I wonder how many of us actuallt c
I got the new maxtor drive in and restored the image using EZGigII software
which worked just fine ...however, the thing won't see my internal iomega
zip 100 drive ...downloaded the latest driver package for it ...still
doesn't see it ...rebooted and still no good ...looked in bios and no sign
of i
so, as I said, I sent back a Seagate barracuda 120gb ide pata drive that was
noisy and they sent a Maxtor diamondmax in its place under warranty (I paid
$20 for the prepaid shipping both ways and the "pass each other in the
night" scheme to facilitate restoring the image). What they sent me is a
1
Comcast sells their rebranded netgear ...they recommended either netgear or
linksys (the latter doesn't allow for firmware upgrades but depends on
"versions") ...comcast said they don't recommend the dlinks ...looking at
NETGEAR CG814WG or LINKSYS WCG200 both of which are combined gateway and
wifi
> Well I would never allow someone to come in with their own hub/router.
> Always keep a few pocket hubs around. So we differ there.
I would never allow someone to come in with their own router either.
They did this of their own accord and I made the mistake of not
looking closer because they are
Can't access network drive from HP notebook w/Vista Business. Vista
"sees" the drive but gives RPC error. Says to contact administrator.
Compaq notebook [Vista home premium] can't see drive at all. Drive
appears on Dell with XP, also mounts immediately in OS X Tiger. Drive
has its own IP addres
>And you patched this PC the last time, when? 1998?
>You do have some odd issues. I've never seen that. If there is an old PC
>that hasn't been on in while, I'll see a lng list of updates, all on one
>page. I don't know what you did to get it to only show 10 at a time.
No that is not the l
>After some additional investigation, I discovered that the "hub" they had
>brought in to aggregate their laptops was, in fact, a router, with its own
>DHCP server. It was having a fun time giving out its own incompatible IP
>addresses.
Well I would never allow someone to come in with their own h
21 matches
Mail list logo