Hi,
Am Mittwoch, 18. April 2018, 21:49:32 CEST schrieb Ulrich Pegelow:
> Am 18.04.2018 um 21:40 schrieb frieder:
>
> My recommendation: if performance during export plays any role for you
> then you should go for the higher amount of GPU memory.
>
Here the statistics after an export of a 24 MPix
Recently, after serious overheating on a portable system, I installed a
Conky panel on my desktop to provide basic system information. I now get
visuals on the cpu core loadings and temperatures. Good for my peace of
mind.
David
On 04/18/2018 01:18 PM, Matthieu Moy wrote:
> - Original
- Original Message -
> From: "frieder"
> It is darktable 2.2.1 on Debian Linux the higest version I can get at
> the moment.
You can compile the latest dt relatively easily on a Debian stable.
You don't _have_ to, but each dt version comes with s many cool features
Am 18.04.2018 um 21:40 schrieb frieder:
Am Mittwoch, den 18.04.2018, 18:13 +0200 schrieb Ulrich Pegelow:
No, that's not what I would want to see (which version of darktable
are
you using). The final lines of the output should look something like:
It is darktable 2.2.1 on Debian Linux the
Am Mittwoch, den 18.04.2018, 18:13 +0200 schrieb Ulrich Pegelow:
> No, that's not what I would want to see (which version of darktable
> are
> you using). The final lines of the output should look something like:
It is darktable 2.2.1 on Debian Linux the higest version I can get at
the moment.
No, that's not what I would want to see (which version of darktable are
you using). The final lines of the output should look something like:
8,290702 [opencl_summary_statistics] device 'GeForce GTX 1060 6GB' (0):
peak memory usage 375014720 bytes
8,290722 [opencl_summary_statistics] device
- Original Message -
> From: "Robert William Hutton"
> More memory is good because it allows you to process images through opencl
> without tiling them,
> which is a lot faster. Of course this depends on the resolution of the images
> you need to process,
> but I'd
Am Mittwoch, den 18.04.2018, 06:51 +0200 schrieb Ulrich Pegelow:
> You may also run darktable with -d opencl -d memory, do some typical
> stuff and then close darktable at which point it will tell you the
> peak
> usage of GPU memory.
This is what I did, and this is the output of the last lines
You may also run darktable with -d opencl -d memory, do some typical
stuff and then close darktable at which point it will tell you the peak
usage of GPU memory.
Peak usage will be very depending on your usage scheme. It will be high
during export of large images and reasonably low and
More memory is good because it allows you to process images through opencl without tiling them,
which is a lot faster. Of course this depends on the resolution of the images you need to process,
but I'd always try to get the most video ram possible.
I think you can do darktable -d opencl to
Hallo,
I need to buy a new graphics adapter mostly for darktable and open CL.
I'm thinking about a Radeon RX 560 card, which is offered with 2 or 4
GB Video-RAM.
Currnently I'm using a R7 card with 2MB wich seems fine memory wise,
but has no more open-cl-driver support with later distributions.
11 matches
Mail list logo