Package: perl
Version: 5.10.0-16
Followup-For: Bug #221790
I'm getting, for a while already, variations to the warning below.
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG =
Package: xserver-xorg-video-radeonhd
Version: 1.2.3-1
Severity: minor
File: radeonhd
Does it make sense to report bugs on this driver version or is it too
early?
Hardware: RS690 X1250 on ASUS ML68 board. Using KDE.
Anyhow, it works a little bit but crashes in many cases. It works better
(for
Hello,
Back in Dec. 2007, you reported repeated and numerous crashes with
samba 3.0.24-6etch8
We're sorry for not following up with this.
Though the code didn't really change since then, did you have more
such crashes or do you think this was a transient behaviour which we
have very little
Steve properly anayzed in that BR that nmbd should indeed not even
start with eh bug submitter's settings.
However, we're still left with something that becomes nmbd should
shutdown gracefully when no more non localhost network interfaces are
available.
Do you guys think we should keep this bug
On Tue, Oct 21, 2008 at 06:49:20PM +0200, Gerfried Fuchs wrote:
On the contrary, I rather think of packages.debian.org as the end
user's view and it might be confusing to have the patch-tracking linked
from there. But then, that might be just me and I hope I won't get
I guess you meant
Package:gnome-control-center
Version: 1:2.22.2.1-2
End of build log:
dh_install -pgnome-control-center
dh_install: gnome-control-center missing files
(debian/tmp/usr/lib/nautilus/extensions-1.0/*.so), aborting
make: *** [binary-install/gnome-control-center] Error 1
dpkg-buildpackage: failure:
* Andreas Metzler [EMAIL PROTECTED] [21/10/08 18:26] wrote:
Could you check whether adding
MAIN_TLS_TRY_VERIFY_HOSTS =
to exim4.conf.localmacros helps? (Do not forget to run
/ect/init.d/exim4 reload after modifying the file.)
Still does not work. However, the error has changed:
Let's face it, an OO rewrite is never going to happen.
However, it is now possible for commands to pass their own options to
init(). So the big list of command-specific options can be moved out of
Dh_Getopt.pm, and into the individual commands.
--
see shy jo
signature.asc
Description: Digital
Hi,
On Tue, 2008-10-21 at 00:11 +0100, Adam D. Barratt wrote:
Attached is the diff for my NMU of netkit-rwall (versioned as 0.17-6.1).
The changelog entry for the upload is:
netkit-rwall (0.17-6.1) unstable; urgency=low
* Non-maintainer upload.
* Add missing dependencies on
Package: wnpp
Owner: Marcelo Jorge Vieira [EMAIL PROTECTED]
Severity: wishlist
* Package name: libjs-debugger
Version : 0.5
Upstream Author : Stefan Strigler [EMAIL PROTECTED]
* URL : http://blog.jwchat.org/javascript-debug-logger/
* License : GPL-2+
Hi Martin
I'm sorry Martin, I didn't look properly at my /etc/apt/sources.list before
Here's my complete /etc/apt/sources.list:
--
deb http://mirror.switch.ch/ftp/mirror/debian/ etch main contrib
deb http://security.debian.org/ etch/updates main contrib
deb-src
Hello!
I tried adding your HEADLINES to my conf, and it works; unfortunately
I am now using 1.8.2 , so I cannot be sure; but may you please try
this bug again and see if it works for you now?
I'm afraid I no longer run Freevo on the machine that was causing the
problems - I've changed to
On Tue, Oct 21, 2008 at 05:30:49PM +0100, Mark Hindley wrote:
Actually, I think I have seen the bug. Could you try the following
patch and see if it fixes it for you.
with your patch applied, I cannot reproduce the problem I was seeing
anymore. I agree that not checking the return status of the
Michael Rasmussen wrote:
yes, verified on Debian Unstable x86 and Ubuntu Hardy x86_64
cpio -id --no-absolute-filenames test.cpio
I wonder what's the problem with your archive. I'm generating ASCII archives
here and they don't show the problem. I've tried with archives with several
subfolders
Damyan Ivanov dijo [Tue, Oct 21, 2008 at 09:46:51AM +0300]:
-=| Michelle Konzack, Sun, Oct 19, 2008 at 02:28:47PM +0200 |=-
Since I am currently coding a new IMAP client based on Perl, I like
to see this feature as fast as posibel.
One way to help upstream would be to send a patch that
Package: libghc6-missingh-dev
Version: 1.0.1.0
Severity: important
libghc6-missingh-dev fails to install because it apparently depends on
hslogger-1.0.5 while Debian Sid contains hslogger-1.0.6
Setting up libghc6-missingh-dev (1.0.1.0) ...
Reading package info from
also sprach Hamish Moffatt [EMAIL PROTECTED] [2008.10.21.1401 +0200]:
Those messages are actually coming from LessTif rather than Xpdf. The
messages actually happen regardless of which file you open, if any at
all (there are separate bug reports about them).
Sorry that I didn't see them. Maybe
Hi,
I confirm that this is a S3 UniChrome:
00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host Bridge
01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8378 [S3 UniChrome]
Integrated Video (rev 01)
So apparently I do have 3D support on this box... which I
Reuben,
On Mon, Oct 20, 2008 at 1:30 PM, Reuben Thomas [EMAIL PROTECTED] wrote:
Package: manpages-dev
Version: 3.05-1
Severity: normal
This function is automatically called by the other time conversion
functions that depend on the time zone.
This is true but not complete: as far as I can
Package: netdiag
Version: 1.0-9
Severity: normal
After upgrade a new surprise :(
1.0-8 has not this problem.
# trafshow
[430772.325612] device eth0 entered promiscuous mode
[430772.326124] device lo entered promiscuous mode
[430772.330714] trafshow[25420]: segfault at 10 ip b7eabee2 sp bfec8e70
Package: virtinst
Version: 0.300.3-5
Severity: normal
virtinst dies when he tries to create a temporal file in the inexistent
directory /var/lib/xen, when I manually create that directory everything goes
ok:
morron:~/virtual_machines# virt-install --os-type=linux --os-variant=rhel4
What is the
The updated version does not appear to resolve the issue. Term output follows:
Preparing to replace openjdk-6-jre-lib 6b11-9 (using
.../openjdk-6-jre-lib_6b12-0_all.deb) ...
Unpacking replacement openjdk-6-jre-lib ...
Preparing to replace openjdk-6-jre-headless 6b11-9 (using
Package: libspe2-dev
Version: 2.2.80-95-2
Severity: minor
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
hi,
libspe2-dev does not install the .pc pkgconfig files, which make life
much easier for application writers.
i see that the files are generated and installed into debian/tmp, but
not
package apt-cacher
tag 502480 pending
thanks
On Tue, Oct 21, 2008 at 11:11:13AM -0700, Sebastien Delafond wrote:
On Tue, Oct 21, 2008 at 05:30:49PM +0100, Mark Hindley wrote:
Actually, I think I have seen the bug. Could you try the following
patch and see if it fixes it for you.
with your
Package: virtinst
Version: 0.300.3-5
Severity: normal
virtinst dies when he tries to create a temporal file in the
inexistent directory /var/lib/xen, when I manually create that
directory everything goes ok:
morron:~/virtual_machines# virt-install --os-type=linux --os-variant=rhel4
What is the
On Tue, Oct 21, 2008 at 09:25:25AM +0200, Sven Joachim wrote:
On 2008-10-20 22:34 +0200, Lennart Sorensen wrote:
On Sun, Oct 12, 2008 at 03:22:11PM +0200, Sven Joachim wrote:
Indeed, it doesn't build correctly. But I didn't notice that, because
the nvidia-kernel-source package hides the
Hi Emilio,
On Tue, 21 Oct 2008 20:11:42 +0200
Emilio Pozuelo Monfort [EMAIL PROTECTED] wrote:
Do you have a (simple) way to make an archive which has the issue?
The simplest way is to grab claws-mail and claws-mail-extra-plugins
from launchpad: http://ppa.launchpad.net/claws-mail/ubuntu/
I
On Tuesday 21 October 2008, Colin Watson wrote:
That may be the proximate cause, but at most it's just exposing
breakage elsewhere. The actual incorrect code is in libparted itself,
not parted_server. It should not be generating p1-type device names
for LVM logical volumes.
Problem is that
Version 2.0.8 of psycopg2 has been released, and it would be good to
get it packaged. One important thing it fixes is a double free in
one of the error handling, which quickly leads to segfaults.
+1. Just ran into this segfault. I'll probably have to fix it locally
sometime soon, but it
Hi Nahuel,
On Tue, Oct 21, 2008 at 04:32:15PM -0200, Nahuel Greco wrote:
Package: virtinst
Version: 0.300.3-5
Severity: normal
virtinst dies when he tries to create a temporal file in the inexistent
directory /var/lib/xen, when I manually create that directory everything goes
ok:
Could
hi,
I wanted to report that I use everyday iceweasel 3.0.3-3 on two amd64
boxes (one at home, one at office), and it works fine for me.
Just wild-guessing... I have noted that Michele had installed both
the Adobe and the open-source flashplayer plugin some time ago I
had a problem with the
Package: dansguardian
Version: 2.9.9.7-2
Severity: grave
Justification: renders package unusable
After migrating to new disk (but there had been a recent upgrade of the
package and I did not notice whether is worked before migrating) I cannot
start Dansguardian.
Get a failure recommenting using
Package: ejabberd
Version: 2.0.1-4
|Severity|: minor
It seems that the way to add modules is to simply copy them into
/usr/lib/ejabberd/ebin, is it possible to add another location (outside
of package control) to this path? Presumably somewhere such as
/usr/local/lib/ejabberd/ebin would be
Package: libvisual-plugins
Version: 0.4.0.dfsg.1-2
Severity: normal
Hi there,
While looking at why libvisual-plugins build-deps on jack for
Ubuntu[1], I noticed that the jack bdep while correct and correctly
detected by the upstream configure.ac isn't used at all.
Hi,
Can I add a me too and also another data point. show() was working
fine with the previous verion, and then stopped at the weekend.
Looking at my dpkg.log it says:
2008-10-19 12:12:35 upgrade python-matplotlib 0.98.3-3 0.98.3-4
so that implies version 0.98.3-3 works - but I've not tested
Package: libvisual-plugins
Version: 0.4.0.dfsg.1-2
Severity: minor
Hi,
debian/patches/90_autoreconf.patch is huge because it includes
autom4te.cache/; you don't want to ship that, it's only meant to speed
up autoconf, automake etc., not configure, and it makes the patch
huge.
Package: podlators-perl
Version: 2.1.2-1
Severity: serious
Justification: maintainer's opinion
The Pod::Man implementation bundled with perl/5.10.0-16 has cherry-picked
fixes from Podlators 2.1.3 and 2.2.0. The version currently in the
podlators-perl package is significantly inferior, although it
tags 502164 upstream
forwarded 502164 http://bugs.jpilot.org/1952
thank
John Talbut a écrit :
Package: jpilot
Version: 1.6.0-1
Severity: important
When I use the Restore Handheld facility I get the message:
Fatal Alert
AddressLib.c, Line:395,
Invalid AppInfo Block
I have to hard reset the
0.400.0-3 has another kind of errors:
morron:/tmp# virt-install
Traceback (most recent call last):
File /usr/bin/virt-install, line 34, in module
import virtinst
File /var/lib/python-support/python2.5/virtinst/__init__.py, line
28, in module
from Guest import Guest,
Package: audacity
Followup-For: Bug #502447
I can't reproduce this bug neither, I have been using this program yesterday.
The original submitter has a strange version of libwxbase2.6-0 and
libwxgtk2.6-0 2.6.4.0-2rpd that I cannot find in Debian, maybe thats the
problem?
HTH.
-- System
On 2008-10-21 20:58 +0200, Lennart Sorensen wrote:
make-kpkg has a modules_clean target. Does using that before the build
help?
Nope, same problem.
If not, then I suspect there is a problem with the cleaning
target in the nvidia package we have to figure out.
All I can say that make-kpkg
Package: libvisual-plugins
Version: 0.4.0.dfsg.1-2
Severity: normal
Tags: patch
E: libvisual-plugins source: outdated-autotools-helper-file config.guess
2003-06-17
E: libvisual-plugins source: outdated-autotools-helper-file config.sub
2003-06-18
this makes porting harder etc.; solution is to
-=| Artur R. Czechowski, Tue, Oct 21, 2008 at 08:01:44PM +0200 |=-
Hi,
Damyan, could you, please, look again into http://bugs.debian.org/499544?
Especially please see my comment and attachmnent from Sep 21[1].
The problem is that currently locking with dcop does not work. In
mentioned
Hi Helge,
Helge Kreutzmann [2008-10-21 18:39 +0200]:
bzr get bzr+ssh://bzr.debian.org/pkg-cups/cups/lenny
Where do I get the password? (Sorry, so far I only used git, svn and
cvs from debian.org, so there might just be a missing info on my
side).
Ah, indeed, sorry. Use
Hideki Yamane a écrit :
Package: libpcsclite-dev
Severity: normal
Tags: patch
Hi,
Hello,
I saw Kuro-box Pro (arm arch) users claims that when they use program
to decode B25 data that build with libpcsclite-dev, it occurs
winscard_svc.c:565:MSGCheckHandleAssociation() Client failed to
Hello Martin,
On Tue, Oct 21, 2008 at 09:34:59PM +0200, Martin Pitt wrote:
Right, the lenny branch will be frozen. So indeed you should actually
use http://bzr.debian.org/pkg-cups/cups/debian-trunk/ .
Thanks, this works except I probably need a newer bzr[1]. Will do the
pull once I upgraded to
Package: libvisual-plugins
Version: 0.4.0.dfsg.1-2
Severity: wishlist
Tags: patch
Hi,
I wrote a watch file when looking at updating the package for Ubuntu,
please find it attached.
This is the list of changes I did:
libvisual-plugins (0.4.0.dfsg.1-2ubuntu3) intrepid; urgency=low
*
Hello.
I didn't understand anything of what you said, I am not a security
expert anyway, and I am not a maintainer of this packages.
But anyway, the problem exists in the new Etch version 2.0.0.17-0etch1?
And does it exist in Lenny 3.0.3-2?
Thanks for your help.
Bye.
--
Ivan
Package: squeeze
Version: 0.2.3-5
Severity: important
While archiving folders Sqeeze freezes the desktop filling almost all the
memory in a short time. It takes a lot
of time to finish them the desktop to recover (I'm afraid to test it again, I
think about 5-7 minutes for a 500k
folder). I'm
Package: linux-image
Severity: normal
net.ipv4.tcp_dsack is enabled by default, and for some reason causes certain
websites to hang when downloading web pages through a proxy. For example:
curl -x [my proxy] http://www.zdziarski.com
causes the web page to hang every other query. disabling
On mar, 2008-10-21 at 23:00 +0300, Mihai wrote:
While archiving folders Sqeeze freezes the desktop filling almost all
the memory in a short time. It takes a lot
of time to finish them the desktop to recover (I'm afraid to test it
again, I think about 5-7 minutes for a 500k
folder). I'm on
Still after update to iceweasel 3.0.3-2, problem persist, no change.
--
-
Juhani Karlsson
Kangastuvankatu 4 as 20
53500 Lappeenranta
0442727093
juhani dot karlsson at iki dot fi
http://lrdlnx.iki.fi
-
X-Virus-Scanned: Debian amavisd-new (with
Hi,
Jim Studt wrote:
Adding a Depends on update-inetd resolves this problem. Tested with
piuparts (thought cnews causes some trouble because of its config).
I just want to take a look at #502855 (non-free files in the nntp
package) as well before uploading a fixed version.
Regards,
Ansgar
David Baron schrieb am Tuesday, den 21. October 2008:
Package: dansguardian
Version: 2.9.9.7-2
Severity: grave
Justification: renders package unusable
After migrating to new disk (but there had been a recent upgrade of the
package and I did not notice whether is worked before migrating) I
Package: libqbanking6
Severity: minor
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8
On Tue, Oct 21, 2008 at 11:41:14AM +0200, Aurelien Jarno wrote:
Package: general
Severity: serious
Justification: DFSG
raff.debian.org uses a Compaq Smart 5i RAID card. A flash memory is used
to store the firmware. While the firmware is freely downloadable (as in
beer) on HP website [1],
Package: iceweasel
Version: 3.0.3-2
Severity: normal
Tools - add-ons
Iceweasel couldn't retrieve add-ons.
From the dialog, click Browse all-addons
404 error: page not found
https://addons.mozilla.org/en-US/firefox/iceweasel
-- System Information:
Debian Release: lenny/sid
APT prefers
On Tue, Oct 21, 2008 at 01:30:42PM +0200, Romain Beauxis wrote:
Agreed, though it does not restrain us from asking for free firmware.
If I recall well, one of the origin of the GNU fondation was the fact that
having free drivers alowed one to actually *fix* issues he may have with his
Jim Studt wrote:
The copyright holder of batch.c may be located at
http://www.academ.com/academ/resume.html. Perhaps a quick email or phone
call from a debian developer can get this changed.
But the main problem is the missing license for *almost all* files.
Only the ones I listed actually
Hello.
I looked in the strace and found this couple of files that seem strange:
12613 open(/usr/lib/iceweasel/components/xpti.dat.tmp,
O_WRONLY|O_CREAT|O_TRUNC, 0666) = -1 EACCES (Permission denied)
12613 open(/usr/lib/iceweasel/components/xpti.dat.tmp,
O_WRONLY|O_CREAT|O_TRUNC, 0666) =
Hi,
today I was diving through the list of rc bugs and stumbled across
#496174. Appearently there has been an unblock request by luk for
version 2.4.2-3 of this package. But in the meantime there has been an
upload 2.4.2-3.1. Additional to that I would like to note, that the
changelog of 2.4.2-3
Hi!
* Stefano Zacchiroli [EMAIL PROTECTED] [2008-10-21 19:26:13 CEST]:
On Tue, Oct 21, 2008 at 06:49:20PM +0200, Gerfried Fuchs wrote:
On the contrary, I rather think of packages.debian.org as the end
user's view and it might be confusing to have the patch-tracking linked
from
Package: gnome-orca
Tags: l10n
Hallo Debian-Team,
bei der Arbeit mit dem Screenreader orca unter Lenny sind mir ein paar
Korrekturvorschläge bei der Übersetzung eingefallen. Ihr findet meine
Vorschläge in der beigefügten diff Datei.
Sollte es mit dem Patch Probleme geben, kann ich die
forwarded #503019 http://bugzilla.xfce.org/show_bug.cgi?id=4147
thanks
On mar, 2008-10-21 at 22:17 +0200, Yves-Alexis Perez wrote:
On mar, 2008-10-21 at 23:00 +0300, Mihai wrote:
While archiving folders Sqeeze freezes the desktop filling almost all
the memory in a short time. It takes a lot
On Tuesday 21 October 2008, Frans Pop wrote:
I've taken a look at the two manual runs and it looks like there is
some weird issue in busybox.
[...]
In the bad case $package is correctly determined as d-i, but after
that the following comparison in the script evaluates to true:
[ $line !=
Package: memstat
Version: 0.5
Severity: normal
The memstat output starts with several lines which look like
${size}: PID ${PID} (${filename})
However, the filename is generally not the executable of
the reported process, but rather some other mapped file
(sometimes a shared object, sometimes
Package: gkrellm-xkb
Version: 1.05-5
Severity: important
Tags: unreproducible, help
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Just one more question.
Are you using KDE with it's custom layout setting manager? Can you
please test for example:
setxkbmap us,sk,ar -option grp:shift_toggle
and change layouts with both shifts pressed? If you do use KDE then
preferably in other DE/WM.
Thanks,
Adam
--
To
Attached is a patch intended to make it possible to reproduce/debug
this issue on architectures w/ more common page sizes (e.g. i386).
--
dann frazier
--- flex-2.5.35.orig/scan.c 2008-10-21 14:27:17.0 -0600
+++ flex-2.5.35/scan.c 2008-10-21 12:59:00.0 -0600
@@ -5157,6 +5157,7 @@
On Tue, Oct 21, 2008 at 7:15 AM, Rogério Brito [EMAIL PROTECTED] wrote:
Ok, this far.
Just till that point... ;-)
Did you sync the device? From the message, it seems that some data were to
be written to the device, but the device was already gone by that time, but
I'm not a specialist on
Package: tzdata
Version: 2008h-2
Severity: normal
Tags: patch
On a system with SELinux enabled, copying a file into /etc/localtime causes
its security context to be set to etc_t, the default for files in /etc. But
/etc/localtime needs to be labelled as locale_t, so you need to run
restorecon on
Patrick Schoenfeld wrote:
Hi,
today I was diving through the list of rc bugs and stumbled across
#496174. Appearently there has been an unblock request by luk for
version 2.4.2-3 of this package. But in the meantime there has been an
upload 2.4.2-3.1. Additional to that I would like to
Package: gkrellm-xkb
Version: 1.05-5
Severity: important
Tags: unreproducible, help
A bug which has a major effect on the usability of a package, without
rendering it completely unusable to everyone.
This bug can't be reproduced on the maintainer's system. Assistance
from third parties is needed
Package: libspe2
Followup-For: Bug #483278
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
hi,
the debian/rules file in this package is totally screwed up. i was looking
at this because of another minor issue (missing .pc files), but it seems
this problem will have be solved first.
i plan to
On Tue, Oct 21, 2008 at 01:25:25PM +0100, Dominic Hargreaves wrote:
Oops. Seems I mistakenly assumed it had been fixed (based on my earlier
posts to the bug).
In recompense, I offer to NMU this fix; I've also updated the
diagnostic warning to more accurate.
I will do this this evening
The discussion in #502618 was very illuminating. This bug should be closed as a
duplicate.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
At Tue, 21 Oct 2008 14:36:08 +0200,
Helmut Grohne wrote:
Package: gkrellm-xkb
Version: 1.05-5
Severity: grave
Justification: renders package unusable
On changing the layout using setxkbmap the plugin simply does nothing.
Only toggling caps or num lock triggers an update. Also
On Tue, Oct 21, 2008 at 9:33 AM, Theodore Tso [EMAIL PROTECTED] wrote:
A patch to suppress the WARN information will be in 2.6.28 when the
user does something stupid (i.e., yank out a USB stick without
unmounting the filesystem first). This was done mainly to suppress
the scary message in
Hello Dominic,
* 2008-10-21 23:20, Dominic Hargreaves wrote:
On Tue, Oct 21, 2008 at 01:25:25PM +0100, Dominic Hargreaves wrote:
Oops. Seems I mistakenly assumed it had been fixed (based on my earlier
posts to the bug).
In recompense, I offer to NMU this fix; I've also updated the
On changing the layout using setxkbmap the plugin simply does nothing.
Only toggling caps or num lock triggers an update. Also left-clicking on
the plugin area results in a menu that when closed gets redrawed to the
correct flag (so the old flag is partly overwritten with the new one).
I am
tag 502831 patch pending
owner 502831 !
thanks
Hi, I've attached a patch.
Looks like the depends was updated to makedev | udev but the postinst
check wasn't changed from .devfs. I've attached a patch which updates it
to check for .udev as well, since leaving it in is not a problem.
I'll upload
On Tuesday 21 October 2008 22:20:21 Alexander Wirt wrote:
David Baron schrieb am Tuesday, den 21. October 2008:
Package: dansguardian
Version: 2.9.9.7-2
Severity: grave
Justification: renders package unusable
After migrating to new disk (but there had been a recent upgrade of the
Hello,
since the bug was rather evident but laid uncommeted for months, I've
built the package and uploaded Ludovico's NMU to delayed/7-day.
If there are problems, the upload can be canceled within 7 days with the
commands documented in ftp://ftp-master.debian.org/pub/UploadQueue/README
Ciao,
P.S.
Instead of all that stuff about SysV, why not an error message like:
Dansguardian cannot open /tmp/ Check permissions.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: linux-image-2.6.26-1-amd64
Version: 2.6.26-8
Severity: important
*** Please type your report below this line ***
While high cpu load there are false joystick input events like moving
joystick to it's down-right position. Here is how to reproduce:
1. run:
jstest /dev/input/js0
hi, is there any reason not to just make running makedev conditional on
udev not being active? This is the normal solution.
I was going to offer to NMU, but you seem to be handling the issue. Let
me know if you'd rather I applied the above patch.
Matt
--
Matthew Johnson
signature.asc
Hi,
[ Please keep the bug report CC'ed ]
Jim Studt wrote:
The oldest release of nntp I could find was 1.5.11 from 1991. There is
no hint of a package-wide license or copyright in there. The bulk of
this code was probably written and released before March 1, 1989 and
would have entered
On Oct 21 2008, Sam Morris wrote:
Hi there! Is there any chance you could make your packages of libswfdec
0.8 available elsewhere? I would like to try out swfdec 0.8. :)
I have uploaded them here:
http://people.debian.org/~manty/swfdec0.8/
Hope that helps.
Regards...
--
Manty/BestiaTester -
On Tue, 2008-10-21 at 19:02 +0200, Bastian Blank wrote:
On Tue, Oct 21, 2008 at 05:25:26PM +0100, Daniel Watkins wrote:
A name (or alias) like 'iwlwifi-firmware' would be helpful (as I assumed
that
would be roughly what the package name for any firmware I was missing would
be).
On Tue, Oct 21, 2008 at 09:02:57PM +0200, Frans Pop wrote:
On Tuesday 21 October 2008, Colin Watson wrote:
That may be the proximate cause, but at most it's just exposing
breakage elsewhere. The actual incorrect code is in libparted itself,
not parted_server. It should not be generating
On Sun, Oct 19, 2008 at 01:09:48PM +0200, Lucas Nussbaum wrote:
Package: acidlab
Version: 0.9.6b20-23
Severity: serious
User: [EMAIL PROTECTED]
Usertags: piuparts piuparts-20081019
Hi,
While testing packages with piuparts, I discovered the following problem with
your package, which can
Package: devscripts
Version: 2.10.39
Severity: grave
Justification: renders package unusable
Hi, rmadison is currently broken. This may be a problem with dak, in which
case it's probably not severity grave.
[EMAIL PROTECTED]:~/d-i/laptop-detect-0.13.7$ rmadison libc6
Traceback (most recent
On Tue, 21 Oct 2008 22:45:56 +0100, Matthew Johnson wrote:
hi, is there any reason not to just make running makedev conditional on
udev not being active? This is the normal solution.
Just that I'm not sure how to detect if udev is active or not :)
I was going to offer to NMU, but you seem
On Tue, 21 Oct 2008, Michael Kerrisk wrote:
Can you provide some more supporting information please. E.g., a
simple test program that demonstrates the point, or some source code
references/analysis?
Oh bother, it's a Perl bug, not a man page bug. I wrongly assumed that Perl
was just calling
Package: sdcv
Version: 0.4.2-7
Severity: normal
Tags: patch
Hi!
sdcv fails to build twice:
(...)
dh clean
dh_testdir
dh_auto_clean
dh_clean
rm po/*.gmo
rm: cannot remove `po/*.gmo': No such file or directory
make: *** [clean] Error 1
dpkg-buildpackage: failure: fakeroot debian/rules
On Tue, Oct 21, 2008 at 5:04 PM, Reuben Thomas [EMAIL PROTECTED] wrote:
On Tue, 21 Oct 2008, Michael Kerrisk wrote:
Can you provide some more supporting information please. E.g., a
simple test program that demonstrates the point, or some source code
references/analysis?
Oh bother, it's a
Le Tuesday 21 October 2008 22:28:31 Lennart Sorensen, vous avez écrit :
If I recall well, one of the origin of the GNU fondation was the fact
that having free drivers alowed one to actually *fix* issues he may have
with his *own* hardware. Then, the very same reasoning can apply to
binary
On Tue, 21 Oct 2008, Michael Kerrisk wrote:
On Tue, Oct 21, 2008 at 5:04 PM, Reuben Thomas [EMAIL PROTECTED] wrote:
On Tue, 21 Oct 2008, Michael Kerrisk wrote:
Can you provide some more supporting information please. E.g., a
simple test program that demonstrates the point, or some source
Hi Julien!
On Mon, 20 Oct 2008 14:43:41 +0200, Julien Cristau wrote:
On Tue, Oct 7, 2008 at 01:18:32 +0200, Luca Capello wrote:
3) X.Org
This is the main problem: after the first reboot, X11 starts, but the
screen remains black.
[...]
I can provide X.Org log files from etch and
As maintainer of Xmame, I'll be working on this package.
Thanks,
--
Midway upon the journey of our life,
I found myself within a forest dark,
For the straightforward pathway had been lost
signature.asc
Description: OpenPGP digital signature
201 - 300 of 343 matches
Mail list logo
