Package: ede
Version: 1:1.0pre4-2
Severity: grave
Justification: renders package unusable
I can't install ede anymore since the last update. I'm using Emacs21 and
Emacs22. Problem seems to be with 22.
When I try to install it, I get:
# apt-get install ede
Paketlisten werden gelesen... Fertig
Abhä
I seem to have the same problem with my Radeon XPRESS 200M (PCI ID 1002:5a42)
on an LG LE50 Express laptop whenever DRI is not disabled in xorg.conf -
except that the screen is garbled instead of blank. Power button or SysRq-B
is needed to reboot.
This is with kernel 2.6.23-rc3 and xserver-xorg
Package: virtualbox-source
Version: 1.4.0svn4130-dfsg-1
Severity: normal
Hi,
The virtualbox-modules packages' postinst attempts to modprobe the
module, which fails if the current kernel doesn't have the module. For
example, I'm preparing the upgrade to 2.6.22-2, but currently running
2.6.22-1; s
Quoting Milan Zamazal ([EMAIL PROTECTED]):
> > "CP" == Christian Perrier <[EMAIL PROTECTED]> writes:
>
> CP> Just in case, I recreated the *.css files from scratch.
>
> Do you mean you get the error even with newly created *.css files?
>
> If you used or created some *.css files with 200
Package: emacs22
Version: 22.1+1-1
Severity: wishlist
The default install appears to have an audible bell enabled. It beeps
for no good reason, such as whenever I press Ctrl-G. This is an evil
usability misfeature that should IMHO be off by default.
To make matters worse the beep goes to the PC s
Severity: serious
Package: gforge
Version: 4.6.99+svn6078-1
User: [EMAIL PROTECTED]
Usertags: nonfree-doc rfc
Hi!
This source package contains the following files from the IETF under
non-free license terms:
gforge-4.6.99+svn6078/plugins/eirc/EIRC-1.0.2.tar.gz
which contains the following fi
Package: qemubuilder
Version: 0.39
Severity: normal
Tags: patch
Hi,
qemubuilder --create does not work here for the ARM platform (following
the wiki for getting kernels). For some undetermined reason, the kernel
reports the NIC as eth0 but ifconfig -a shows it to be eth2.
The following hack does
> Why did you not move the main log files under /var/log/?
In fact old backuppc logs are compressed using a non-standard program. So they
can be read only from the web interface.
All logs under /var/log are usually readable with view, zcat, zless, so if
backuppc logs were put there, I think I w
Am Sonntag, den 02.09.2007, 18:09 -0500 schrieb Luis Rodrigo Gallardo
Cruz:
> On Sun, Sep 02, 2007 at 06:43:29AM +0200, Sebastian Dröge wrote:
> > Package: liferea
> > Severity: wishlist
> >
> > Hi,
> > there's a new upstream version 1.4.0 available from liferea.sf.net.
> > Please update in unsta
Greetings
JOB OFFER / EMPLOYMENT OPPORTUNITIES FOR USA AND CANADA RESIDENTS .
We are offering job opportunity to residents of America and Canada.
Tyrone Textiles is a textile and fabrics Company that has its head office
base here in London and business offices in so many part of Europe,
Asia and
On Monday 03 September 2007 19:04, Paul wrote:
> > urrgs why are you using such an old kernel?
>
> So, are you saying that this behavior will go away when I upgrade? Somehow
> I doubt that, but I will try. I was waiting to upgrade the kernel when I
> moved from stable to unstable, and I was waitin
It really does matter.. www.cornerneighbor.cn
Yours Sincerely,
Lela,
www.boyperiod.cn
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
tags 422962 pending
thanks
documented the keepalive option in the documentation for enabling swap,
should be included in next upload, patches to be found in bzr branch:
http://llama.freegeek.org/~vagrant/bzr/ltsp/vagrant-main
live well,
vagrant
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
On Tue, Sep 04, 2007 at 02:50:45PM -0600, Bryan Sutula wrote:
> In the chroot's /etc/init.d/ltsp-client-setup, X server settings are
> preseeded before running dexconf or dpkg-reconfigure. The script omits
> the "-e" option to echo, so when run under bash, debconf-communicate
> doesn't do the righ
On Tue, Sep 04, 2007 at 03:05:09PM -0600, Bryan Sutula wrote:
> After apt-get install ltsp-server, I try to execute ltsp-build-client. It
> completes, but the created chroot is missing some of config settings. The
> most important is the keyboard layout. Without this, the clients fail to
> boot
On Tue, Sep 04, 2007 at 01:10:11PM -0600, Bryan Sutula wrote:
> On Sun, 2007-08-12 at 11:04 -0700, [EMAIL PROTECTED] wrote:
> > could you please test the new packages and see if this adequately
> > addresses the issues you experienced?
> From what I can tell, the new version (5.0.8) is more capab
Package: gtk-qt-engine
Version: 1:0.8~svn-rev36-2
Severity: normal
Tags: l10n
This bug came out of the discussion for bug #439559. You can read there for
more background. In short, GTK apps appranetly have some way of indicating
whether they are in Left-to-Right to Right-to-Left mode. gtk-qt fails
Hi,
Uploaded another version. Sorry, in my running I didn't build correctly
the package and forgot to upload the source.
$ echo -foo | grep -vw foo
$
Regards,
Santiago
On Wed, Sep 05, 2007 at 12:40:13AM +0200, arno wrote:
> Le mardi 04 septembre 2007, à 17:22:35 -0500, Santiago a écrit :
>
> "Frank" == Frank Lichtenheld <[EMAIL PROTECTED]> writes:
Frank> your package failed to build from source. AFAICT this doesn't seem
to be
Frank> architecture specific.
Looks like I must have been compiling it based on Etch instead of Sid
by mistake. On Etch the libhcrypto library do
Package: cpio
Version: 2.6-17
Severity: important
This is bug #364872 being re-raised. The test case supplied
with that bug still fails:
[EMAIL PROTECTED]:~$ cd /; (echo .; echo etc; echo lost+found) | cpio -o -H
ustar | cpio -itv
drwxr-xr-x 1 root root 1264587412 Jan 27 2010
Dear Stephan,
thanks for tracking this down. I will release an updated version of galculator
the next days, fixing this issue as well.
best, simon
On Tue, 04 Sep 2007 20:42:33 +0200 Stephan Hermann <[EMAIL PROTECTED]> wrote:
> Package: galculator
> Version: 1.2.5.2-1
>
> Dear Sebastien,
>
> p
Here is the full backtrace of the crash:
#0 0x2b373087b4e0 in memchr () from /lib/libc.so.6
No symbol table info available.
#1 0x0040325c in prtext (beg=,
lim=0x620001 "foo\n", nlinesp=0x0) at grep.c:1022
nl = 0x1
bp = 0x0
p = 0x1
eol =
Package: php5-gd
Severity: important
attempting to install php5-gd on an up to date sarge install results in
php5-gd: Depends: php5-common (= 5.2.0-8+etch7~bpo.1) but 5.2.0-8+etch3~bpo.1
is to be installed
-- System Information:
Debian Release: 3.1
Architecture: i386 (i686)
Kernel: Linux 2.6.19
Package: gdmap
Version: 0.7.5-2
Severity: wishlist
I'd like to be able to use gdmap on remote filesystems, via ssh,
sftp/scp, ftp, smb, webdav and so on. ssh is the most important for me
at this stage, the others would just be nice to have.
--
bye,
pabs
http://wiki.debian.org/PaulWise
signatu
Hey Maks: Thanks for the help.
On Tuesday 04 September 2007 16:54, maximilian attems wrote:
> On Mon, 03 Sep 2007, Paul wrote:
> > You say you need more info. Like, what? --Paul
>
> your 2.6.16 config please?
Ok..attached from the boot directory.
> i bet your trouble is not reproducible with st
Package: grep
Version: 2.5.3~dfsg-1
Severity: normal
In debian/rules, CFLAGS is set to be just -O3. CFLAGS should also
include -g, so that building with DEB_BUILD_OPTIONS=nostrip keeps
the debugging symbols.
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (50
"Kartik Mistry" <[EMAIL PROTECTED]> writes:
> tag 424592 patch
> thanks
Thanks for the patch!
--
KBK
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Michael Biebl schrieb:
> Dylan Thurston schrieb:
>> Cyril Brulebois <[EMAIL PROTECTED]> (30/08/2007):
>>> According to the changelog, not accurate:
>>> | + Add Conflicts/Replaces: network-manager-gnome (<< 0.6.5-1) as [...]
>>>
>>> Not doing so would be a grave bug (file conflict between packages).
Hi!
First off, thank you for fixing the bug that quick! :-)
But I have to admit I did miss something when I reported the bug:
on i686, the standard pam module does a way better job than the one
shipped with vmware (i.e. vmware's refuses to work on i686).
A working /etc/pam.d/vmware-authd wou
Here's a first cut that does (2) with a slight modification to mountnfs.
If DELAYNFS=yes is set in /etc/default/rcS then it will exit the script
unless all auto configured interfaces are up.
There may be a better way of figuring out which interfaces are set to
auto, but this ones works for al
Hi!
A "suggested fix"...
Would it be possible to create a post-inst script in the created
vmware-{server|workstation|player} package setting the corrent value in
/etc/modprobe.d/vmware ?
As those packages do depend on vmware-kernel-modules anyway, creating
such a configfile sounds fine to m
Package: wnpp
Severity: wishlist
Owner: Raphael Geissert <[EMAIL PROTECTED]>
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
* Package name: kblogger
Version : 0.6.5
Upstream Author : Christian Weilbach, Antonio Aloisio
* URL : http://kblogger.pwsp.net/
* License
Package: vmware-package
Version: 0.13
Severity: wishlist
--- Please enter the report below this line. ---
Using vmware server 1.0.3 with the vmware any-any patchset v113,
vmware-vmx was unable to run due to insufficient dependencies.
Suggested fix:
arch=i686:
- depend on libxt6 zlib1g libxt
Dylan Thurston schrieb:
> Cyril Brulebois <[EMAIL PROTECTED]> (30/08/2007):
>> According to the changelog, not accurate:
>> | + Add Conflicts/Replaces: network-manager-gnome (<< 0.6.5-1) as [...]
>>
>> Not doing so would be a grave bug (file conflict between packages).
>
> Do you have a reference
Dylan Thurston schrieb:
> Cyril Brulebois <[EMAIL PROTECTED]> (30/08/2007):
>> According to the changelog, not accurate:
>> | + Add Conflicts/Replaces: network-manager-gnome (<< 0.6.5-1) as [...]
>>
>> Not doing so would be a grave bug (file conflict between packages).
>
> Do you have a reference
Le Tue, Sep 04, 2007 at 03:03:40PM -0400, Joey Hess a écrit :
> Sep 2 09:56:29 partman: No matching physical volumes found
> Sep 2 09:56:29 partman: Reading all physical volumes. This may take a
> while...
> Sep 2 09:56:29 partman: No volume groups found
> Sep 2 09:57:25 init: Process '
Package: xserver-xorg-core
Version: 2:1.3.0.0.dfsg-12
Severity: minor
Hello,
I tried the xrender benchmark from
http://www.freedesktop.org/~zack/xrenderbenchmark.tar.bz2, and when I
ran it, it virtually locked up every other X client. I think this is a
problem, although such clients are uncommon
Steve's patch solved this problem for me on i386 sid.
-Michael
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Tue, 2007-09-04 at 10:07 -0700, Kevin B. McCarty wrote:
> Drew Parsons wrote:
> > Package: paw
> > Version: 1:2.14.04.dfsg.2-1
> > Severity: normal
> >
> > paw has a dependency on g77. As far as I can see g77 is now (under
> > gcc4 or gcc4.2) deprecated in favour of gfortran. Should paw's
> >
I did the following as suggested and it didn't help:
rm -Rf /var/lib/menu-xdg/* plus dpkg-reconfigure menu-xdg.
It seems as if there must be some local configuration file that is
messed up instead of system wide since 2 different logins show different
menu options from the debian menu. One login
Cyril Brulebois <[EMAIL PROTECTED]> (30/08/2007):
> According to the changelog, not accurate:
> | + Add Conflicts/Replaces: network-manager-gnome (<< 0.6.5-1) as [...]
>
> Not doing so would be a grave bug (file conflict between packages).
Do you have a reference for why "Replaces" is necessary?
I would also like to summarise the problem the way I understand it:
If the mouse-pointer is inside the window and the window has focus,
the window grabs all keyboard-input. If this focus lasts for a while
when idling - let's say 5 minutes - and the local desktop screensaver
does not start - your m
reopen 440851 =
severity 440851 important
thanks
Robert Newson <[EMAIL PROTECTED]> (05/09/2007):
> The command I run is 'dpkg-buildpackage -rfakeroot' (the space in my
> submission was a typo) and it fails in the way I described.
Alright. By the way, you may want to use “debuild”.
> It's just t
'dpkg-buildpackage -rfakeroot' succeeds if you uninstall git-core.
This didn't used to be necessary, but I can live with it.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: cowdancer
Version: 0.39
Severity: minor
This is a kind of "anormal" bug report, but I just want to document my
findings for other users/backporters:
While recompiling cowdancer in an Etch chroot, the following build
failure happend:
gcc cowdancer-ilistcreate.c -o cowdancer-ilistcreate.o
The command I run is 'dpkg-buildpackage -rfakeroot' (the space in my
submission was a typo) and it fails in the way I described. Running
'dpkg-buildpackage -r fakeroot' is an immediate and rather obvious
failure, whereas my build actually successfully compiles the git
binaries and successfully runs
Package: stage
Version: 2.0.3-1
Severity: important
Tags: patch
Usertags: implicit-pointer-conversion
Our automated buildd log filter[1] detected a problem that is likely to
cause your package to segfault on architectures where the size of a
pointer is greater than the size of an integer, such as
On Tuesday 04 September 2007, you wrote:
> Le mardi 04 septembre 2007 15:54, Frans Pop a écrit :
> > Why was it decided to do this differently for Debian? Backwards
> > compatibility with previous Debian versions maybe?
> Yes, 2 reasons:
I've reversed your reasons for clarity of my arguments.
> 2
Package: refblas3-dev
Version: 1.2-8
Severity: normal
refblas3-dev should not Depends: libc6-dev. libc6-dev is in
build-essentials anyway, and not every architecture has a libc6 at
all. That's what buils-essential takes care of. If you really must
depend on a libc dev package, use the generi
I replaced wodim and family and made symbolic links to cdrecord and
mkisofs as can be seen here:
[EMAIL PROTECTED]:~$ wodim -version
Cdrecord-ProDVD-ProBD-Clone 2.01.01a33 (i686-pc-linux-gnu) Copyright (C)
1995-2007 Jörg Schilling
[1]+ Doneemacs brasero-session.log
[EMAIL PROT
severity 440841 normal
thanks
Sami Liedes <[EMAIL PROTECTED]> (04/09/2007):
> Justification: root security hole
?!
> This is bad: It silently accepts any package signed by any key in the
> running user's keyring.
What about the following? An Application Manager asks his/hers New
Maintainer appl
Sorry, I dropped the ball on this as I was very busy. Let me circle back
with my team and look into this.
> -Original Message-
> From: Ralph Schindler [mailto:[EMAIL PROTECTED]
> Sent: Monday, September 03, 2007 10:52 AM
> To: sean finney; [EMAIL PROTECTED]
> Cc: Jan Wagner; Andi Gutmans
>
> Benj. Mako Hill wrote:
> > Actually, I mentioned a different RockBox installing utility which
> > was one that I wrote.
>
> Nu-uh! http://mako.cc/copyrighteous/20070308-00.comment :-)
>
> > That said, this one is much better. I'm happy to try it out and
> > consider packing it though.
>
> I s
Package: icedove
Version: 2.0.0.4.dfsg1-2
Severity: wishlist
Hello,
would it be possible to rename the user-specific conf-directory to
.mozilla/thunderbird - just as the other mozilla skins use
.mozilla/something directories?
Thanks for your work & regards
Mario
--
I heard, if you play a NT
Package: iceowl
Version: 0.5-2
Severity: wishlist
Hello,
would it be possible to rename the user-specific conf-directory to
.mozilla/sunbird - just as iceweasel uses .mozilla/firefox?
Thanks for your work & regards
Mario
--
As a rule, the more bizarre a thing is, the less mysterious it prov
This has been fixed upstream in r410; it is related to only semi-finished
code currently in the project that got pulled in with the r409 changes.
The next Debian release will use a modified patch that doesn't have the
semi-finished code, and should not have this problem.
Phil
--
To UNSUBSCRIBE,
This bug is fixed in r452 upstream and will be in the next official
release. (It should /not/ be pulled into the current Debian release
of the code, as the data files have undergone a massive format change
since then, and the diff will not apply cleanly. That said, a by-hand
matching change could
On Tue, 2007-09-04 at 01:04 -0300, W. Martin Borgert wrote:
> On Sun, Sep 02, 2007 at 12:07:42AM +0200, Sven Arvidsson wrote:
> > Is this running remotely?
>
> No.
>
> > Do you also get the crash if you start it
> > through gnopernicus?
>
> Yes, both with gnopernicus and with gnome-orca, but the
On Tue, Sep 04, 2007 at 11:41:44AM -0700, Digant C Kasundra wrote:
> --On Saturday, September 01, 2007 10:19:35 AM +1000 Matthew Palmer
> <[EMAIL PROTECTED]> wrote:
> >On Fri, Aug 31, 2007 at 11:39:46AM -0700, Digant C Kasundra wrote:
> >>therefore, this moves our ssl certs over to /var/lib/puppet
Package: python-pygame
Version: 1.7.1release-4.1+b1
Severity: normal
[EMAIL PROTECTED]:~>cat foo.py
#!/usr/bin/python
import pygame
pygame.init()
Run this in a loop and you'll get:
[EMAIL PROTECTED]:~>while :; do python foo.py; sleep 1; echo foo; done
foo
foo
foo
Xlib: connection to ":0.0" ref
On Wed, Aug 29, 2007 at 03:06:46PM +0200, Stefan Völkel wrote:
> Hi Ned,
>
> thanks to bernie's intensive troubleshooting he discovered the problem
> wrt irssi.
>
> [EMAIL PROTECTED] wrote:
> > I discovered the problem is irssi requires TERM to be set. The
> > following crontab entry works for m
I can reproduce this easily. I use aoss and then it works. I guess
pygame doesn't use alsa, so the dmix that I use to allow multiple things
to use my sound card doesn't work unless I use aoss.
--
see shy jo
signature.asc
Description: Digital signature
Update: the first version of the patch didn't allow the -zoom auto option to
persist across multiple images. This version fixes that.
diff -ruNp a/TODO b/TODO
--- a/TODO 2000-02-09 04:23:32.0 -0500
+++ b/TODO 2007-09-03 23:31:28.0 -0500
@@ -22,7 +22,6 @@ add vicar reader,
Package: inform
Followup-For: Bug #440253
Sorry about that. In fact, you have to apply for permission to make
derivative works. Nonetheless, if it's OK to distribute Inform 6 as
non-free, the same should be true for Inform 7; the terms are
substantially the same.
-- System Information:
Debian Rel
package: linux-2.6
Lenny Printing bug with Samsung ML-2010 with Kernel 2.6.21-2-486 #1 Wed
Jul 11 03:17:09 UTC 2007 i686
printing job stayed in Kjobviewer
Printing OK with/ older //kernel 2.6.18-4-486 #1 Mon Mar 26 16:39:10 UTC
2007 i686 /
Hi,
this Samsung ML-2010 [EMAIL PROTECTED] las
I know how to beat the game without making large numbers of bases, but
I'd like to try the approach that involves making lots of bases, and
this really does call for a way to easily destroy them. When I tried it
by hand, it was too time consuming.
Building multiple counts of an item would also be
On Mon, 2007-07-16 at 11:49 +0200, Josselin Mouette wrote:
> Le lundi 16 juillet 2007 à 01:29 +0300, Martin Dimitrov a écrit :
> > When loged user make a "switch user" and other user log on. After new user
> > finish his work
> > and want to log off he immediately get access to previous loged in u
Package: reprepro
Version: 1.3.1-1
Severity: normal
I recently added a new architecture to my conf/distributions file. After
that I did a "reprepro export" to get the new index files created, which
worked fine (I thought). Looking back now, I see that the architecture:all
packages in my archive a
On Tue, Sep 04, 2007 at 05:22:35PM -0500, Santiago Ruano Rincón wrote:
> Hi,
>
> Please, could you help me to test if this package [1] fixes the problem
>
> [1] http://people.debian.org/~santiago/grep_2.5.3~dfsg-1+1_i386.deb
Can you provide a source package/interdiff?
Thanks
Justin
Package: acpid
Version: 1.0.4-7.1
Severity: important
The following speaks for itself:
# LANG=C apt-get install
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 547 not upgraded.
1 not fully installed or
Package: vmware-package
Version: 0.12
Severity: wishlist
--- Please enter the report below this line. ---
Using the configuration for vmware-authd from /etc/pam.d/vmware-authd as
built by vmware-package fails to authenticate users on amd64 with vmware
server 1.0.3 using the vmware any-any patc
Le mardi 04 septembre 2007, à 17:22:35 -0500, Santiago a écrit :
>
> Please, could you help me to test if this package [1] fixes the problem
>
> [1] http://people.debian.org/~santiago/grep_2.5.3~dfsg-1+1_i386.deb
It does not seem to fix the problem:
I installed you package, and tried examples g
On Mon, 2007-09-03 at 18:38 +, yellow protoss wrote:
> Thanks for your reply. I was a very fresh installed. I installed
> debian sarge (backported kmuto), then dist-upgraded to etch. I did not
> play too much around with the machine to delete any files. I wish I
> could give more details.
Hi
# Automatically generated email from bts, devscripts version 2.10.7
found 440704 1:6.3-071+1sarge2
#fixing missing epoch
notfound 440704 6.3-071+1sarge2
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Tuesday 04 September 2007 23:48:49 you wrote:
> On Tue, Sep 04, 2007 at 03:58:12PM +0200, Steffen Moeller wrote:
> > Upstream Author : Name <[EMAIL PROTECTED]>
> > * URL : http://www.example.org/
>
> Nice upstream author and upstream url.
There is not much I could possibly say in
Package: xpdf-reader
Version: 3.02-1.1
Severity: normal
Hi,
The default output encoding of xpdf is Latin1, but that is almost never
fine with nowadays' debian UTF-8 desktop. The default should just be
the current locale, i.e. xpdf should
- call setlocale(LC_ALL,"")
- use the value returned by n
Hi,
Please, could you help me to test if this package [1] fixes the problem
[1] http://people.debian.org/~santiago/grep_2.5.3~dfsg-1+1_i386.deb
Best regards,
Santiago
signature.asc
Description: Digital signature
Package: smc
Version: 1.0-1
Severity: serious
Tags: patch
smc is unplayably slow when using the R300 driver due to the lack of Render
acceleration. This lack requires that operations such as anti-aliased line
drawing are done in software.
This patch works around the problem.
--- ./src/video/vide
Hi,
On Sat, Aug 25, 2007 at 08:26:30PM -0400, Whit Hansell wrote:
> Had a problem w. the IceApe browser closing when I tried to scroll or
> even open some pages. And it would not open a particular email sent
> from Earthlink but it turned out it was not Earthlinks problem. The
> sender used di
Excellent! The packages you provided fixed my problem too!
Many thanks,
Scott
-Original Message-
From: Emanuele Rocca [mailto:[EMAIL PROTECTED]
Sent: Tuesday, September 04, 2007 4:21 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]; Vladimir Volovich; Filipus Klutiero; Bailey,
Sco
On Tue, 04 Sep 2007, Ritesh Raj Sarraf wrote:
> The issue is seen during boot in initrd and can't be captured at that stage.
> I'd have to do serial console redirection on my laptop to get the error and
> I'm a bit lazy to get the exact error messages. :-)
it can be, with break=foo, ipconfig an
Package: deborphan
Version: 1.7.23
Severity: wishlist
Tags: patch l10n
Hello
Attached basque translation update, please commit it.
thx
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1,
'experimental'
Jussi Hakala wrote:
> When a warning about not confirming to new Python policy is raised,
> the build will break. This is due to the fact that hashes (#) are
> present in the warning string.
I can't reproduce this. Can you point out a package where this happens?
--
To UNSUBSCRIBE, email to [EM
# Automatically generated email from bts, devscripts version 2.10.7
# block by the gambas2-must-use-firebird2.0-dev bug
block 438862 with 440864
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Tue, 4 Sep 2007, sara wrote:
> and can't conect to www.digikam.com using the menu help>about digikam>
> it says can't find kfmclent Has this anything to do with the other bug?
Quite likley,
kfmclient is located in the konqueror package.
Can you install konqueror on your system and see if that
[ please don't drop bug report on cc, this not private thanks :) ]
On Tue, Sep 04, 2007 at 05:52:44PM -0400, Paul wrote:
> You mean the ".config" file from the /usr/src/linux dir, or do you mean
> the config from initramfs-tools?
yes the .config from your 2.6.16 kernel.
usually also on /boot/conf
tags 440142 + patch pending
thanks
Hi Carlos,
On Thu, Aug 30, 2007 at 01:51:39AM -0500, Carlos C Soto wrote:
> Package: ttf-dejavu
> Version: 2.19-1
> Severity: normal
>
>
> ttf-dejavu includes a set of great fonts, but looks like a particular
> group is set incorrectly: Serif*Oblique
> The fo
Package: mirrors
Severity: wishlist
Submission-Type: new
Site: debian.utalca.cl
Type: leaf
Archive-http: /debian/
Mirrors-from: debian.ubiobio.cl
Archive-architecture: i386
Maintainer: Alejandro Valdes Jimenez <[EMAIL PROTECTED]>
Country: CL Chile
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
I tried linux-image-2.6.23-rc4-amd64
(version: 2.6.23~rc4-1~experimental.1~snapshot.9444)
from trunk, but I still experience this bug:
$ ls -altrF /sys/bus/i2c/devices/
total 0
drwxr-xr-x 4 root root 0 2007-09-04 23:07 ../
drwxr-xr-x 2 root root 0 2007-09-04 23:07 ./
--
http://frx.nets
Package: gambas2
Version: 1.9.50-1
Severity: serious
Tags: patch
Hi,
firebird1.5 (providing firebird2-dev) will be removed[1] from the
archive because it is no longer supported upstream and has security
issues.
[1] http://bugs.debian.org/438862
This will make gambas2 instantly FTBFS. Severity s
Package: slim
Version: 1.2.6-1
Severity: normal
Well, x sessions started by slim do not get the settings from
/etc/default/locale. This should work by default imho.
--- System information. ---
Architecture: i386
Kernel: Linux 2.6.21-2-k7
Debian Release: lenny/sid
990 testing f
Package: digikam
Followup-For: Bug #440250
and can't conect to www.digikam.com using the menu help>about digikam>
it says can't find kfmclent Has this anything to do with the other bug?
-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i38
On Mon, 6 Aug 2007 16:30:19 +0200 maximilian attems wrote:
> hello,
Hi there! :)
>
> On Wed, 13 Jun 2007, Francesco Poli wrote:
>
> > Package: linux-image-2.6.20-1-amd64
> > Version: 2.6.20-3
> > Severity: normal
> >
> > Hi!
> >
> > It seems I'm not able to read ACPI temperature or fan data
Le mardi 04 septembre 2007 15:54, Frans Pop a écrit :
> Why was it decided to do this differently for Debian? Backwards
> compatibility with previous Debian versions maybe?
Yes, 2 reasons:
1- the debian package 1st introduced the config files in /etc (before they
were found in /var/lib/backuppc)
Package: vmware-package
Version: 0.12
Severity: wishlist
--- Please enter the report below this line. ---
Using vmware-package on debian etch 4.0r1 on amd64 with vmware server
1.0.3 and any-any update v113 produces an unusable vmware-server package.
In the resulting vmware-server package, vmwar
Package: epiphany
Version: 0.5.1-4
Severity: important
System: Linux 2.6.17-1-k7 #1 SMP Mon Jul 17 13:21:38 UTC 2006 i686
X Vendor: The X.Org Foundation
X Vendor Release: 1030
Selinux: No
Accessibility: Disabled
GTK+ Theme: Simple
Icon Theme: gnome
Memory status: size: 166768640 vsize: 16676
On Tue, Sep 04, 2007 at 10:20:47AM +0200, Thijs Kinkhorst wrote:
> Hi,
>
> This is CVE-2007-3912.
> Please add it (retroactively) to the changelog.
Done, will commit it in 0.35
Javier
signature.asc
Description: Digital signature
On Tue, Sep 04, 2007 at 08:18:01PM +0200, Michael Prokop wrote:
> Package: snort-common
> Version: 2.7.0-3
> Severity: normal
>
>
> Is there any specific reason why snort-common (a non-dev package)
> ships header files?
Not really. I will look into it.
Regards
Javier
signature.asc
Descriptio
Jens Seidel wrote:
> Hi Joey,
>
> On Tue, Sep 04, 2007 at 12:41:17PM -0400, Joey Hess wrote:
> > After beating the game, I saw fireworks, but no text over them. Only
> > when I noticed a menu entry to view the credits sequence, I saw the same
> > fireworks again, plus text that was clearly meant t
Package: gambas2
Version: 1.9.50-1
Severity: serious
Justification: FTBFS
Hi,
I was trying to build gambas2 from source on fresh amd64 sid and it
failed with the following error:
x86_64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I.. -DPNG_NO_MMX_CODE
-I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include
1 - 100 of 391 matches
Mail list logo
