Package: visualboyadvance
Version: 1.8.0-3
Severity: wishlist
The patch that improved the support of SDL was found.
http://forums.ngemu.com/vba-m/97057-linux-fixes.html
http://vba-m.ngemu.com/vbasources/VBACVSPatches/vba-linux-sdl.patch
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
On Sat, Dec 15, 2007 at 04:37:19PM -0600, hugo vanwoerkom wrote:
I have tried this on 2 systems with the same result:
One possibility: do you have xfonts-{75,100}dpi-transcoded installed?
And if not, could you try installing them to see if that fixes the
problem? If so, it's a known bug for
On Sat, Dec 15, 2007 at 10:23:50AM -0200, Felipe Augusto van de Wiel (faw)
wrote:
The package, .dsc and byhand-ddtp
are here: http://people.debian.org/~faw/ddtp/
(I haven't looked at this yet)
Some doubts appear in the process, while writing the byhand
I realize that you (or other
On Sun, Dec 16, 2007 at 03:45:37AM +0100, Josip Rodin wrote:
After around 11 hours, we've had:
* villa 4.29 MB/s
* lobos 3.91 MB/s
* steffani 14.86 MB/s
The rule9 prediction was:
A: 000.000.000.000-127.255.255.255: steffani, villa, lobos
B: 128.000.000.000-191.255.255.255: steffani
C:
Hello Martin,
Martin Michlmayr a écrit :
Package: libccid
Version: 1.3.1-1
I'm trying to use a Rainbow iKey 3000 (a USB device) but opensc says
Card not present. This is with etch, but I also upgraded to libccid
1.3.1-1 and pcscd 1.4.4-3 from unstable (compiled manually on etch)
and I get the
Package: wireshark
Version: 0.99.7~pre1-2
Severity: normal
Hi,
(1) Open Wireshark with a tcpdump dump as input file
(2) filter dump (for example udp.port!=1194)
(3) invoke save as
(4) enter file name
(5) click on displayed, see that packet number decreases
(6) verify that all packets is selected
Package: xfce4-mcs-manager
Version: 4.4.2-1
Severity: minor
--- Please enter the report below this line. ---
In the menu (I think it's called Prefered programms or Prefered
applications in english) Bevorzugte Anwendungen there is a tab Intenet.
When I run the program in german (maybe the bug has
Andreas, have you seen the discussion that was cc'd to the bts from
linuxwacom-discuss about this? Is what you are seeing the same
issue, or is this something else we should also be discussing there
as well?
Cheers,
Ron
On Sun, Dec 16, 2007 at 02:53:26AM +0100, Andreas Bombe wrote:
On Tue,
On Freitag 14 Dezember 2007, you wrote:
Looking at what it does, I think it doesn't need to be specific to
vlan. Couldn't you as well rename any interface with a name
parameter?
Yes, very true. But renaming vlan interfaces is a special case, not only
because they are removed again by
found 4.6.99+svn6319
thanks
On Fri, Nov 23, 2007 at 12:48:09PM +, Debian Bug Tracking System wrote:
This is an automatic notification regarding your Bug report
I believe this problem was fixed as part of the global Debconf
template translation review that happened a few weeks ago.
Please
On Sat, 15 Dec 2007 22:43:29 -0600
Raphael Geissert [EMAIL PROTECTED] wrote:
Source: deb-gview
Version: 0.1.4
Severity: minor
Hello,
The package short description contains the word 'Gnome' which should be spelt
as GNOME (capitalised).
There appears to be no consensus on this.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sun, 16 Dec 2007 02:33:37 +
Raphael Geissert [EMAIL PROTECTED] wrote:
The debian/watch file of your package on the unstable distribution
fails to report upstream's version. Uscan's message follows:
uscan.pl warning: In watchfile
Package: gforge
Version: 4.6.99+svn6319
Severity: wishlist
Tags: patch l10n
Please find the updated German debconf translation for gforge
attached.
Please place this file in debian/po/ as de.po for your next upload.
If you update your template, please use
'msgfmt --statistics pofile.po'
to
Package: initramfs-tools
Followup-For: Bug #366175
I got the same issue here. Why not solve the problem by adding calls to
lvm initialization in the Waiting for root filesystem loop ?
A workaround is to add break=mount to the kernel command line, wait for
the usb disk to come up and just exit,
Package: pulseaudio
Version: 0.9.8-1
Severity: normal
hi
I tried to set PULSEAUDIO_SYSTEM_START=1 in /etc/default/pulseaudio,
but pulseaudio refuses to start at boot
To try to understand, I added
--log-level=debug
in the command line in /etc/init.d/pulseaudio ; now the line is
Dear Debian maintainer,
On Monday, November 05, 2007, I sent you a notification about the beginning of
a review
action on debconf templates for playmidi.
Then, I sent you a bug report with rewritten templates and announcing
the beginning of the second phase of this action: call for translation
Package: wireshark
Version: 0.99.7~pre1-2
Severity: normal
Hi,
when I filter the attached tcpdump with udp.port != 53, both packets
are still displayed.
udp.srcport != 53, udp.dstport != 53 and udp.srcport != 53
udp.dstport !=53 both work as expected.
Greetings
Marc
-- System Information:
Hi,
On Sun, Dec 16, 2007 at 10:57:42AM +0100, Tollef Fog Heen wrote:
it seems like pfstools fails to build if your /bin/sh is dash rather
than bash.
The problem is in debian/rules:
rm debian/tmp/usr/share/man/man1/pfs{in,out}jpeghdr.1
{ and } are not meta-characters per POSIX;
Package: hesiod
Severity: wishlist
Tags: l10n, patch
Hello,
please update the Italian debconf templates translation (attached).
Regards,
Luca
it.po
Description: Binary data
Package: wireshark
Version: 0.99.7~pre1-2
Severity: normal
Hi,
Wireshark does not seem to recognize submission (tcp/587) as SMTP and
does not parse the network traffic as SMTP. See this by opening the
attached dump in wireshark - the SMTP content shows up as data.
Greetings
Marc
-- System
notfound 443660 2.7-4
thanks
On Sat, Dec 15, 2007 at 07:35:36PM +, Rémi Denis-Courmont wrote:
found 443660 2.7-4
thanks
Hello,
Seems like the original test case does not crash anymore. I still have
problems with this one new though - it crashes pseudorandomly (about 10%
I think a list for discussing processing tips/ways of getting the most
out of ufraw/dcraw/gimp etc would be very useful.
Thanks,
Simon
--
... But apart from the aqueduct, the sanitation and the roads... - Python
signature.asc
Description: Digital signature
On 12/16/07, Francois-Denis Gonthier [EMAIL PROTECTED] wrote:
In Ubuntu, for as far as I remember, /var/run is a tmpfs by default. I think
the patch should be applied.
Then /var/run/yaws should be moved out of /var/run directory at all.
/var/cache/yaws seems to be a better place for it.
--
Package: freeglut3
Version: 2.4.0-6
Severity: normal
glutDestroyWindow() does not really destroy the window. Instead, it
puts the window in a list of windows that will be destroyed later. This
is annoying for software that opens a GL window from time to time that
needs to be closed without the
On Sun, Dec 16, 2007 at 10:12:43AM +0100, Matthias Krüger wrote:
In the menu (I think it's called Prefered programms or Prefered
applications in english) Bevorzugte Anwendungen there is a tab Intenet.
When I run the program in german (maybe the bug has been fixed in the
english version), there
On Sun, Dec 16, 2007 at 09:52:12AM +0100, Matthias Krüger wrote:
[EMAIL PROTECTED] wrote:
On Sat, Dec 15, 2007 at 01:29:40PM +0100, Matthias Krüger wrote:
In my opinion it would be great, if there would be a newsticker (plugin)
for the xfce(4)-panel.
Upstream has a RSS panel plugin
Package: wnpp
Severity: wishlist
X-Debbugs-CC: [EMAIL PROTECTED]
--- Please fill out the fields below. ---
Package name: pystock
Version: 0.2
Upstream Author: yetist [EMAIL PROTECTED]
URL:
http://tel.linuxfans.org/nuke/modules.php?name=Site_Downloadsop=geninfodid=4892
Hi,
Le mercredi 06 décembre 2006 à 11:18 -0500, Daniel Kahn Gillmor a
écrit :
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
At 2006-12-04 23:21, [EMAIL PROTECTED] said:
When receiving mail with X-DSPAM headers already present,
local dspam adds its own to the bottom.
I just
Le Sunday 16 December 2007 12:58:16 Pierre Habouzit, vous avez écrit :
notfound 443660 2.7-4
thanks
On Sat, Dec 15, 2007 at 07:35:36PM +, Rémi Denis-Courmont wrote:
found 443660 2.7-4
thanks
Hello,
Seems like the original test case does not crash anymore. I still have
Subject: libc6: strerror_r() not thread-safe
Package: libc6
Version: 2.7-4
Severity: important
Hello,
strerror_r() crashes pseudo-randomly when multiple threads invoke it
simultaneously. It appears the problem never occurs when using the C/POSIX
locale, and seems to be gettext-related.
when i changed a header file, scons didn't rebuild the targets,
including this header ...
Please be more specific about which header file you have changed and
what change you have made in it. Using your SConscript files and source
I find that SCons is succesfully picking up changes in
Hi
Upstream has moved to code.google.com, new watch file should be
something like this:
version=3
http://code.google.com/p/pyicqt/downloads/list \
http://pyicqt.googlecode.com/files/pyicq-t-(.*).tar.gz
--
Michal Čihař | http://cihar.com | http://blog.cihar.com
signature.asc
Package: kscreensaver
Version: 4:3.5.8-1
Severity: wishlist
kscreensaver is a great package, but I miss a few screensaver. It would be nice
if that screensavers could be added.
KDE Asciiquarium
(http://www.kde-look.org/content/show.php/KDE+Asciiquarium?content=29207)
KCometen3
Package: network-manager-gnome
Version: 0.6.5-3
Severity: normal
Hi,
Though I can connect via PPP through the n-m applet, I am forced to use the
commandline
to disconnect from PPP connections.
The menu entries have no effect.
Cheers,
Julien
-- System Information:
Debian Release: lenny/sid
On Sun, Dec 16, 2007 at 03:09:34PM +0100, Tim Blechmann wrote:
as i said, i am currently busy with other things, so i don't want to
start debugging scons ...
there were issues, when changing header files, which are included by
files, that are autogenerated by my scons build system ...
I am
Le mercredi 03 octobre 2007 à 10:01 +0200, Philipp Kern a écrit :
Hi John,
On Mon, Aug 06, 2007 at 10:55:53AM -0500, John Goerzen wrote:
VPN sessions are grayed out when PPP is active.
is the point `VPN connections' in nm-applet greyed out or the menu
points within that menu? (i.e.
Package: network-manager-gnome
Version: 0.6.5-3
Severity: normal
When connecting via a PPP connection, the icon shown by the n-m applet
is the same as if no network connectivity is running.
The label is also 'No network' (or similar in English).
Cheers,
Julien
-- System Information:
Debian
Package: roundcube
Version: 0.1~rc2-4
Severity: normal
logrotate gives the following message:
/etc/cron.daily/logrotate:
error: roundcube-core:1 duplicate log entry for /var/log/roundcube/sendmail
run-parts: /etc/cron.daily/logrotate exited with return code 1
Looking into it shows that the
Package: x11-common
Version: 1:7.3+7
Lorsque je tente de m'authentifier grâce à KDM, l'autentification est
correct mais je reviens immédiatement à l'écran d'accueil KDM.
Un
more /home/user/.xsession-errors me retourne /etc/kde3/kdm/Xsession:
line 46: /etc/X11/Xsession: Aucun fichier ou
I am not asking you to do any work on SCons. I am asking you to provide
me with enough information to allow me to debug the problem. So far I
have done several tests based on the extremely limited information which
you have provided, none of which have shown any problem so I can't
really
Hi,
On Sun, Dec 16, 2007 at 02:22:45PM +0100, Roland Clobus wrote:
-Bedankt voor het spelen. Ik hoop de je het leuk vond.\n
+Bedankt voor het spelen. Ik hoop dat je het leuk vond.\n
Right.
I suggest to keep the extra spaces in this string, otherwise it will not
be shown (too high on the
Theodore Tso, le Sun 16 Dec 2007 10:03:12 -0500, a écrit :
On Sun, Dec 16, 2007 at 02:47:35AM +, Samuel Thibault wrote:
However, we still have a problem on the resize part. On GNU/Hurd (and
also on some BSD variants IIRC), the _IOW macro encodes the type in the
actual ioctl number, so
tag 456531 + unreproducible
thanks
On Sun, Dec 16, 2007 at 01:39:46PM +, Rémi Denis-Courmont wrote:
Subject: libc6: strerror_r() not thread-safe
Package: libc6
Version: 2.7-4
Severity: important
Hello,
strerror_r() crashes pseudo-randomly when multiple threads invoke it
On Sun, Dec 16, 2007 at 01:30:39PM +, Rémi Denis-Courmont wrote:
Le Sunday 16 December 2007 12:58:16 Pierre Habouzit, vous avez écrit :
notfound 443660 2.7-4
thanks
On Sat, Dec 15, 2007 at 07:35:36PM +, Rémi Denis-Courmont wrote:
found 443660 2.7-4
thanks
Hello,
Hello
Your holiday would be not full without gd se..
http://exactold.com
Kerstin mcclafferty
To a little heap of stones Came the Yonghy-Bonghy-Bo.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hello
Your holiday would be not full without gd se..
http://sensefollow.com
Kerstin mcclafferty
That Pobbles are happier without their toes!
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hello
Your holiday would be not full without gd se..
http://slipgrow.com
Kerstin mcclafferty
For his Hat was a hundred and two feet wide,
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hello
Your holiday would be not full without gd se..
http://meanthard.com
Kerstin mcclafferty
The Quangle Wangle said
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: vpnc
Version: 0.5.1r254-1
Severity: normal
Tags: patch
pcf2vpnc generates one space too many on the Domain line. This makes the
authentication fail.
Indeed vpnc is strict on spaces in its file format: Note that all
strings start exactly one space after the keyword string (README.gz
Hello
Your holiday would be not full without gd se..
http://meanthard.com
Kerstin mcclafferty
The shore of the Bristol Channel,
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hello
Your holiday would be not full without gd se..
http://exactold.com
Kerstin mcclafferty
By the turkey who lives on the hill.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Brightness would probably be a better word. The video I attached to
the bug report is much too bright, compared to the actual display.
I know about theora artifacts, I think this is different.
Thanks for the feedback,
A.
On Fri, Dec 14, 2007 at 08:39:22PM +0100, Luca Bruno wrote:
I'm having
Hello
Your holiday would be not full without gd se..
http://slipgrow.com
Kerstin mcclafferty
That is all I have to say-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hello
Your holiday would be not full without gd se..
http://slipgrow.com
Kerstin mcclafferty
Yes! you've asked me far too late,
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hello
Your holiday would be not full without gd se..
http://seasonorgan.com
Kerstin mcclafferty
The Owl looked up to the stars above,
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hello
Your holiday would be not full without gd se..
http://meanthard.com
Kerstin mcclafferty
And besides, to the Crumpetty Tree
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hello
Your holiday would be not full without gd se..
http://sensefollow.com
Kerstin mcclafferty
And the Blue Baboon who played the flute,
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hello
Your holiday would be not full without gd se..
http://seasonorgan.com
Kerstin mcclafferty
And when the Sieve turned round and round,
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hello
Your holiday would be not full without gd se..
http://slipgrow.com
Kerstin mcclafferty
They sailed away in a Sieve, they did,
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Le Sunday 16 December 2007 17:55:18 Pierre Habouzit, vous avez écrit :
like said, I'd like to have:
* your libc6 version ;
2.7-4
* your libc6-i686 version ;
2.7-4
It also happens with libc6-i686 purged, in any case, so that's not that:
#0 0xb7e31e21 in strcmp () from /lib/libc.so.6
Package: cernlib
Severity: wishlist
Tags: l10n, patch
Hello,
please add the Italian debconf templates translation (attached).
Regards,
Luca
it.po
Description: Binary data
tag 454184 unreproducible
severity 454184 important
thanks
On Mon, Dec 03, 2007 at 10:31:36PM +0100, Andrzej Adam Filip wrote:
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0xb72eab20 (LWP 21768)]
0xb7ef4c1b in mozsupport_set_zoom () from
Package: python-paste
Version: 1.5.1-1
Severity: normal
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
While viewing the package's documentation at
http://localhost/doc/python-paste/docs/,
I noticed that the 'Paste Script', 'Paste Module Index', 'Paste WebKit'
and 'Wareweb' links are all broken.
package dvd+rw-tools
tags 456551 + patch
thanks
The attached patch fixes dvd+rw-tools compilation for me.
--
Daniel Schepler
diff -urN dvd+rw-tools-7.0.old/transport.hxx dvd+rw-tools-7.0/transport.hxx
--- dvd+rw-tools-7.0.old/transport.hxx 2006-09-23 11:29:07.0 +
+++
Package: audacious
Version: 1.4.4-1
Severity: important
The latest audacious version has a new default theme which is ugly.
Much worse is the fact that it overrides the configured GTK+ theme with
a one that is most of the time completely different and doesn’t
integrate at all with other
Package: audacious
Version: 1.4.4-1
Severity: minor
When disabling the use of bitmap fonts (which only serve the purpose of
looking like the ugly XMMS), the text in the main window is unreadable.
Regardless of the chosen size for the font, it is cut horizontally, at
about the third of the
Hello
Your holiday would be not full without gd se..
http://meanthard.com
Kerstin mcclafferty
On the broad green leaves of the Crumpetty Tree,
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
severity 454519 serious
thanks
gosmore FTBFS in testing as gpsd 2.34.dfsg-6 migrated to testing some
days ago, I'm rising the severity therefore.
Attached patch will fix the bug.
--
Bernd Zeimetz
[EMAIL PROTECTED] http://bzed.de/
diff -Nuwr
On Wed, Jul 04, 2007 at 10:14:15PM +0200, Moritz Muehlenhoff wrote:
for Lenny we'd like to stop supporting two freetype packages in the archive.
freetype1 has been in oldlibs for Etch, it has very few reverse deps left
and we'll try to phase it out now.
Please adapt your package, so that it
tags 454438 +patch
thanks
Hi
Please apply the following patch to /srv/ftp.debian.org/apache.conf:
-/VirtualHost
+ Redirect /proposed-updates.html
http://release.debian.org/proposed-updates/stable.html
+ Redirect /oldstable-proposed-updates.html
Package: libdbus-ruby
Version: 0.2.0-1
Severity: wishlist
Tags: patch
This version of the Ruby DBus bindings throws a NotImplementedError
when trying to parse dictionaries (arrays of dict_entries), presumably
because it isn't implemented. A patch is attached which attempts to
implement this.
Package: fail2ban
Version: 0.8.1-3
Severity: normal
A more complete regexp for /etc/fail2ban/filter.d/apache-noscript.conf:
failregex = [[]client (?Phost\S*)[]] (File does not exist|script not found or
unable to stat): .*(\.php|\.asp|\.exe|\.pl)
-- System Information:
Debian Release:
Hi Ludovic,
* Ludovic Rousseau [EMAIL PROTECTED] [2007-12-16 09:38]:
libccid is only used by pcsc-lite. OpenCT has its own CCID driver (with
less features :-)
I don't really know anything about the difference between libccid,
pcsc and openct. All of this is pretty new to me. However, I just
Package: fail2ban
Version: 0.8.1-3
Severity: normal
In /etc/fail2ban/filter.d/apache-badbots.conf, add the last term:
badbotscustom = EmailCollector|WebEMailExtrac|TrackBack/1\.02|sogou music spider
I also added a ssh root filter which I filter more harshly than non-root users:
cat
Josselin Mouette wrote:
Hi,
Can you reproduce this bug with gnome-system-tools 2.20, currently in
unstable?
i've tried to install gnome-system-tools 2.20 but it has a lot of
dependency to fix...
it need a new system-tools-backend that has some other unsatisfied
dependency
i would like to
On Sat, 2007-12-08 at 21:11 +0100, Brice Goglin wrote:
Also, it would be
very good to catch a debugging backtrace with gdb.
I installed xserver-xorg-core-dbg and tried attaching to the running X
server using gdb, but that didn't generate any useful info:
$ cat ~root/gdb.txt
Attaching to
Package: libopal-2.2
Version: 2.2.11~dfsg1-3
Severity: important
I'm filing this bug for libopal-2.2 because it happens with both
simpleopal and ekiga. When I try to use my Logitech QuickCam Messenger
webcam (/dev/video1, V4L), the device is opened successfully but no frames
are captured. The
On Tue, 2007-12-11 at 22:05 +0100, Michael Biebl wrote:
Didrik Pinte schrieb:
Package: tracker-search-tool
Version: 0.6.3-1
Severity: normal
Hi,
Because the behaviour has changed, I thought it was interesting to report
it.
I have trackerd runnging fine and indexing my two
On Dec 14 12:40, Mark Robinson wrote:
[EMAIL PROTECTED]:~$ gpsdrive --help
gpsdrive: unrecognized option `--help'
The --help option spits an error message but works anyway.
The -g option does not appear in the help or the manpage, while the -s and
-r options are incorrectly documented in
Package: ftp.debian.org
Hi
Please replace the /srv/ftp.debian.org/queue/p-u-new/COMMENTS directory
with a symlink to /srv/release.debian.org/suite/stable/current/info and
replace the /srv/ftp.debian.org/queue/o-p-u-new/COMMENTS directory with
a symlink to
Package: gnash
Version: 0.8.1~rc.070818-2
Severity: important
If I would request one site to work with gnash, or its mozilla plugin it is
this one: free copyrighted music avialbale to hera anywhere you want without
paying anything.
On 32 bits architecture, I use to evil on free macromedia
Package: apache2
Version: 2.2.6-3
Severity: important
When the apache2 service is starting, I had an error saying that the
following line Include /etc/apache2/mods-enabled/*.conf in the apache2.conf
file can't be executed because the file
/etc/apache2/mods-available/alias.conf can not be
[EMAIL PROTECTED] wrote:
I must say I am not an experienced sysadmin, but I thought I could share
my knowledge. Using postfix as MTA, I simply IGNORE the previous X-DSPAM
headers:
/^(X-DSPAM-.*)/ IGNORE
as an header check rule.
You can put in place any workaround you like and there
Package: xmms2-scrobbler
Version: 0.1.3-1
Severity: normal
If xmms2 isn't shut down correctly, there is lockfile left in
the ~/.config/xmms2/clients/xmms2-scrobbler directory which causes
this plugin to abort with following messages:
Package: libflash-mozplugin
Version: 0.4.13-9
Followup-For: Bug #366301
This bug still occurs in 0.4.13-9 in unstable. When trying to load a flash
applet (from youtube.com), iceweasel crashes with a Segmentation Fault. This
occurs even when Flashblock is installed and enabled.
-- System
I'll think about this, but ispell requires a wordlist in order
for its look command to work. It's not a strict requirement
for the rest of ispell's functionality, which is why the wordlist
packages are recommends and not depends.
The policy manual still says that we should recommend
packages
Hi,
I've check that Samuel wrote a patch to kbd package, see kernel bug 7746. It
seems to me that it affects loadkeys binary only.
I use package console-tools, so I cannot use package kbd.
It seems console-tools is preferred (`console-tools' was developed from
version 0.94 of the standard
I see exactly the same behavior with UNITSFILE=.units units and units -f
.units: the default is ignores and only .units is loaded.
...
No, not quite exactly. If I call the local file .units.dat I get two
error messages with the env variable.
--
John Hasler
[EMAIL PROTECTED]
Elmwood, WI USA
Package: boinc-client
Version: 5.10.27-1
Severity: normal
Tags: patch, sid
When running boinc-client, I noticed it reporting an odd amount of memory
in stdoutdae.txt:
02-Dec-2007 21:10:12 [---] Memory: 477.64 GB physical, 0 bytes virtual
...and I certainly do not have over 400G of physical
Package: ca-certificates
Version: 20070303
Severity: normal
Please include the SwissSign CA in the ca-certificates package.
SwissSign CA certificates have recently been accepted by Mozilla.
See: https://bugzilla.mozilla.org/show_bug.cgi?id=407396
-- System Information:
Debian Release: lenny/sid
Package: eel2
Severity: wishlist
Tags: patch l10n
Please find the initial German po file translation for eel2
attached.
If you update your template, please use
'msgfmt --statistics pofile.po'
to check the po-files for fuzzy or untranslated strings.
If there are such strings, please contact me
On su, 2007-12-16 at 14:08 +0100, Guus Sliepen wrote:
How does unperish make life easier than make dist and debuild? This
is unclear if you only look at the description.
You're right, I shall elaborate:
Unperish takes care of all the repetitive, mechanical steps of releasing
and building a
Package: gmorgan
Version: 0.25-3
Severity: serious
Hi,
gmorgan ftbfs at amd64,
I tried first at my work environment, and just to confirm I builded in a clean
chroot sid environment
and it fails too.
here is a snipped part from the process
Le Sunday 16 December 2007 21:49:10 Pierre Habouzit, vous avez écrit :
what is your kernel version ? I would be surprised it matters but …
I started with a self-built vanilla 2.6.23.8, and now using 2.6.22-3-686 from
Sid running on a HyperThread single CPU host. Both of them crash.
I haven't
found 434581 7.6.93-4
thanks
On Sun, Dec 16, 2007 at 07:05:39PM +, Debian Bug Tracking System wrote:
pike7.6 (7.6.93-4) unstable; urgency=low
.
* QA upload.
* Removed Image TTF module to drop the dependency on oldlibs
`freetype1'. (Closes: #431784)
* Added a patch by
Package: wx-common
Version: 2.6.3.2.1.5
Severity: normal
I went to install a program that was 15 months old and it complained about the
absence of wx widgets 2.7. The latest version available as a debian package
is 2.6.x
wget
Hi,
On Sunday 16 December 2007, Clément Bâty wrote:
In fact, in my case, it was because the link to the alias was bad,
figuring a single dot . instead of a normal .. like I show in the
lines below :
the link should normally be created with the a2enmod script, which
does the correct link to
Package: pulseaudio
Version: 0.9.8-1
Severity: important
Tags: patch
Hey,
the default configuration of the pulseaudio daemon requires the esound
compatibility layer to start. When only the pulsaudio package is installed,
the following errors are reported:
Dec 16 20:35:41 katherina
Source: phpsysinfo
Version: 2.5.1-6.1
Severity: minor
Tags: patch
The current watch file provided by your package reports a wrong upstream
version because of the extra matching groups.
A working/fixed watch file is:
---
version=3
http://sf.net/phpsysinfo/phpsysinfo-(.*)\.tar\.gz debian uupdate
On Tue, Dec 11, 2007 at 04:04:59PM +0100, Frédéric Boiteux wrote:
Hello,
About resolvconf script added in 2.0.9-8 version, I'm using it, and found a
small problem : the addition of dns server works well (resolvconf -a ...), but
when stopping VPN, the removal (resolvconf -d ...) don't
1 - 100 of 153 matches
Mail list logo
