Bug#590141: rng-tools: init-script should wait for sysfsutils
Package: rng-tools Version: 2-unofficial-mt.13-3 Severity: important Tags: patch Hello, the rng-tools init-script should depend on the start of the sysfsutils init-script: Under some circumstances users have to configure which of the available Hardware RNGs has to be used as current RNG for /dev/hwrng before rngd can start successfully (see below for a full example). This can be done by setting /sys/devices/virtual/misc/hw_random/rng_current, and this, in turn, is done by sysfsutils. Adding # Should-Start: sysfsconf to the rng-tools init-scripts LSB headers should suffice for dependency-based boot. I'm not sure if it's worth the effort to completely fix this for legacy boot as well. The easy part on this is to raise the sequence number from 20 to 21 or higher (because sysfsutils runs at sequence 20 as well and alpabetically orders after rng-tools :)). But a complete fix would also require to remove/re-install the rc*.d symlinks as well, which is not done automatically by update-rc.d. Patch attached. The patch adds the LSB header and increases the legacy sequence number, but does not re-install the rc*.d symlinks. Here is the full example if you care :) I have an IdeaPad S12 VIA Nano where two Hardware RNGs are provided: one by VIA PadLock through via-rng, and one by the Broadcom Wireless card through b43. The Broadcom RNG is only delivering data if the wireless interface is up and otherwise responds ENODEV on read(). Unfortunately, the b43 driver gets loaded earlier than the via-rng driver (the former via udev, the latter via /etc/modules) and thus, by default the Broadcom RNG is selected as current RNG for /dev/hwrng. Unfortunately further, the wirless interface is still down when rng-tools is about to be started and thus rngd fails to start (the interface is brought up by network-manager which starts later than rng-tools). Thus, I need to set the VIA PadLock RNG as current RNG first before rngd can start successfully. regards Mario -- There are 10 types of people in the world: Those who understand binary, and those who don't... diff -urN rng-tools-2-unofficial-mt.13.orig/debian/rng-tools.init rng-tools-2-unofficial-mt.13/debian/rng-tools.init --- rng-tools-2-unofficial-mt.13.orig/debian/rng-tools.init 2010-05-14 04:25:01.0 +0200 +++ rng-tools-2-unofficial-mt.13/debian/rng-tools.init 2010-07-24 07:35:51.001650441 +0200 @@ -7,6 +7,7 @@ ### BEGIN INIT INFO # Provides: rng-tools # Required-Start: $remote_fs $syslog +# Should-Start: sysfsconf # Required-Stop: $remote_fs $syslog # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 diff -urN rng-tools-2-unofficial-mt.13.orig/debian/rules rng-tools-2-unofficial-mt.13/debian/rules --- rng-tools-2-unofficial-mt.13.orig/debian/rules 2010-05-14 04:25:01.0 +0200 +++ rng-tools-2-unofficial-mt.13/debian/rules 2010-07-24 07:43:33.600830910 +0200 @@ -107,7 +107,7 @@ # dh_installpam # dh_installmime dh_installmodules - dh_installinit --error-handler=true + dh_installinit --error-handler=true --update-rcd-params=defaults 21 19 # dh_installcron dh_installman # dh_installinfo signature.asc Description: Digital signature
Bug#590142: /sbin/blkid: PENTAX not seen as UUID into blkid
Package: util-linux Version: 2.17.2-3.1 Severity: important File: /sbin/blkid Dear Sir, blkid is unfortunately not working. In case it is like that can it create a mini hidden file on the vfat so that it can recognisze the UUID. it is important for adding to UUID into /etc/fstab here the output dmesg: 771.730257] usb 1-1.3: Manufacturer: PENTAX [53771.730260] usb 1-1.3: SerialNumber: XXX [53771.730400] usb 1-1.3: configuration #1 chosen from 1 choice [53772.076705] Initializing USB Mass Storage driver... [53772.076875] scsi6 : SCSI emulation for USB Mass Storage devices [53772.077050] usbcore: registered new interface driver usb-storage [53772.077054] USB Mass Storage support registered. [53772.077254] usb-storage: device found at 5 [53772.077257] usb-storage: waiting for device to settle before scanning [53775.017994] usb 1-1.3: USB disconnect, address 5 [53776.493662] usb 1-1.3: new high speed USB device using ehci_hcd and address 6 [53776.586421] usb 1-1.3: New USB device found, idVendor=0a17, idProduct=00ee [53776.586427] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [53776.586431] usb 1-1.3: Product: K-x [53776.586434] usb 1-1.3: Manufacturer: PENTAX [53776.586437] usb 1-1.3: SerialNumber: XXX [53776.586570] usb 1-1.3: configuration #1 chosen from 1 choice [53776.587773] scsi7 : SCSI emulation for USB Mass Storage devices [53776.587963] usb-storage: device found at 6 [53776.587966] usb-storage: waiting for device to settle before scanning [53781.579357] usb-storage: device scan complete [53781.580036] scsi scan: INQUIRY result too short (5), using 36 [53781.580044] scsi 7:0:0:0: Direct-Access PENTAX DSC_K-x 1.00 PQ: 0 ANSI: 0 [53781.581072] sd 7:0:0:0: Attached scsi generic sg6 type 0 [53781.583549] sd 7:0:0:0: [sdf] Adjusting the sector count from its reported value: 7744513 [53781.583559] sd 7:0:0:0: [sdf] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB) [53781.584105] sd 7:0:0:0: [sdf] Write Protect is off [53781.584110] sd 7:0:0:0: [sdf] Mode Sense: 0a 0a 00 01 [53781.584114] sd 7:0:0:0: [sdf] Assuming drive cache: write through [53781.585507] sd 7:0:0:0: [sdf] Adjusting the sector count from its reported value: 7744513 [53781.586001] sd 7:0:0:0: [sdf] Assuming drive cache: write through [53781.586104] sdf: sdf1 [53781.589502] sd 7:0:0:0: [sdf] Adjusting the sector count from its reported value: 7744513 [53781.589998] sd 7:0:0:0: [sdf] Assuming drive cache: write through [53781.590101] sd 7:0:0:0: [sdf] Attached SCSI removable disk blkid gives: /dev/sdb1: UUID=6b8f7a91-55a2-23b3-9840-840978b8af16 TYPE=jfs /dev/sdf1: TYPE=vfat and not single UUID into /dev/sdf1 UUID is not there into /dev/sdf1 :( I mount the camera with USB cable best regards -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages util-linux depends on: ii dpkg1.15.7.2 Debian package management system ii initscripts 2.88dsf-9scripts for initializing and shutt ii install-info4.13a.dfsg.1-5 Manage installed documentation in ii libblkid1 2.17.2-3.1 block device id library ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib ii libncurses5 5.7+20100313-2 shared libraries for terminal hand ii libselinux1 2.0.94-1 SELinux runtime shared libraries ii libuuid12.17.2-3.1 Universally Unique ID library ii lsb-base3.2-23.1 Linux Standard Base 3.2 init scrip ii tzdata 2010j-1 time zone and daylight-saving time ii zlib1g 1:1.2.3.4.dfsg-3 compression library - runtime util-linux recommends no packages. Versions of packages util-linux suggests: ii dosfstools3.0.9-1utilities for making and checking ii kbd 1.15.1-3 Linux console font and keytable ut pn util-linux-localesnone (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#583312: since update to initscripts, sysv... to version 2.88.dfs-5 -- kdm fails to load!
Am Donnerstag, 22. Juli 2010 schrieben Sie: Hello Andreas, Hi Hans, On 2010-07-21 23:02, Hans-J. Ullrich wrote: I do not think, the problem is caused by by nvidia-glx-driver. I checked it out, and got the same results by using gdm, xdm or kdm, and as well as with the vesa driver and xserver-xorg-nv. In all cases I got the same efect: the login-manager did not start, the x-server did not start, exactly as the first bugreport described this behaviour. since you can reproduce the problem without the proprietary nvidia driver, can you solve it by increasing the timeouts used by kdm/gdm/xdm? What values do you need for reliable operation? What about gdm3? Changing the timings in kdmrc works for me. But maybe I can help, too. What did I do? First of all, I made sure, the bug is still reproducable. So I changed the entry in /etc/X11/xorg.conf from nvidia to vesa. Result: same as I described in bug #583613. So I could verify, nvidia-driver is not involved. Then I increased /etc/kde4/kdm/kdmrc [X-*-Core] to ServerTimeout=120 It was formerly commented out, so that the default parameter was set (which is 15). After I did this, I restarted several times (reboot, halt, with power on, with power complete unplugged) and every time it started correctly. After this, I reactivated nvidia in xorg.conf again, and did the same tests again. Now everything is working fine (with ServerTimeout set to 120). At last I stepped back to the original of 15, to seee, if the bug is returned back. Yes, it is! It is as well using vesa or nvidia. Please see #583613. During my testings, I could exclude gdm, kdm and xdm, nvidia, vesa, xserver-xorg-nv. The only thing, which stayed, is the xserver-xorg driver. I think, here might be the main problem. Can you give a short list of the components in your system (CPU, RAM, disks, ...), eventually someone can identify something particular slow in your machine - the reason why this problem is so hard to reproduce on other systems. Do you use anything exotic in hard- or software? Yeah, no problem. I am using an Acer Aspire 7520G, 2GB RAM (677MHz), dual-core AMD64 X2 (with 2 x 2.4 GHz clock). Graphics card is a Nvidia GeForce 8600GS with 512MB RAM. Drives are 2 x sata , each 160 GB, whilst /home, /var, /usr are encrypted (dm-crypt). keys are loaded at boot from usb-stick. I have a good friend, which uses the same package configuration like mine, but she has NO problems at boot. She owns two notebboks, one with a nvidia G-210 graphics card (and no problems), the other one with an ATI graphics card (using xserver-xorg-ati) which she reports of similar problems we are discussing. I am using a second computer (packages identically to my notebook) with the same behaviour. On both computers (the other one is a little bit older, AMD Athlon single cpu 2GHz, 512MB RAM (266MHz), Nvidia GeForce 7300 Ultra) I could reproduce and solve our problem. Last but not least, here is the output of lspci: 00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP67 ISA Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP67 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2) 00:01.3 Co-processor: nVidia Corporation MCP67 Co-processor (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2) 00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2) 00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2) 00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2) 00:06.0 IDE interface: nVidia Corporation MCP67 IDE Controller (rev a1) 00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1) 00:08.0 PCI bridge: nVidia Corporation MCP67 PCI Bridge (rev a2) 00:09.0 IDE interface: nVidia Corporation MCP67 AHCI Controller (rev a2) 00:0a.0 Ethernet controller: nVidia Corporation MCP67 Ethernet (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2) 00:0d.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:04.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 01:04.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 01:04.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12) 01:04.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 01:04.4 System peripheral:
Bug#590143: sysfsutils: init-script should wait for cpufrequtils instead on loadcpufreq
Package: sysfsutils Version: 2.1.0-6 Severity: important Hello, the sysfsutils init-script should depend on the start of the cpufrequtils init-script: Currently, the init-script depends on the start of loadcpufreq - most likely to be able to configure cpufreq governors, but this dependency is not necessarily sufficient to really be able to configure them. A cpufreq governor has not just to be modprobed but it also has to be selected before its configuration is made available through sysfs. While loadcpufreq modprobes them, cpufrequtils selects one. On legacy boot this was not an issue, because sysfsutils started after cpufrequtils (because it alphabetically orders behind), but with dependency-based boot the situation changes: it is now started before, while, or after cpufrequtils depending on what insserv and startpar choose. Patch attached. Btw... I personally believe that sysfsutils should start somewhere close to procps since both do a similar job. The latter currently starts in rcS, which IMHO makes sense because it eases the dependencies of daemons enormously. Would you mind moving sysfsutils to rcS if I'm getting the cpufrequtils maintainer convinced to move to rcS, too? regards Mario -- Das Gegenteil einer trivialen Wahrheit ist falsch; das Gegenteil einer grossen Wahrheit ist ebenfalls wahr. -- Niels Bohr diff -urN sysfsutils-2.1.0.orig/debian/sysfsutils.init sysfsutils-2.1.0/debian/sysfsutils.init --- sysfsutils-2.1.0.orig/debian/sysfsutils.init 2010-07-24 08:28:02.0 +0200 +++ sysfsutils-2.1.0/debian/sysfsutils.init 2010-07-24 08:28:40.198216293 +0200 @@ -3,7 +3,7 @@ ### BEGIN INIT INFO # Provides: sysfsconf # Required-Start:mountkernfs -# Should-Start: udev module-init-tools loadcpufreq +# Should-Start: udev module-init-tools cpufrequtils # Required-Stop: # Default-Start: 2 3 4 5 # Default-Stop: signature.asc Description: Digital signature
Bug#590143: Acknowledgement (sysfsutils: init-script should wait for cpufrequtils instead on loadcpufreq)
package sysfsutils user initscripts-ng-de...@lists.alioth.debian.org usertag 590143 + incorrect-dependency thanks -- Programmieren in C++ haelt die grauen Zellen am Leben. Es schaerft alle fuenf Sinne: den Schwachsinn, den Bloedsinn, den Wahnsinn, den Unsinn und den Stumpfsinn. [Holger Veit in doc] signature.asc Description: Digital signature
Bug#590137: x11: Keyboard disconnected from window.
On Sat, Jul 24, 2010 at 12:13:32 +0800, Jivan Amara wrote: Package: x11-common Version: 1:7.5+6 Severity: important File: x11 Keyboard focus is disconnected from the active window in a number of circumstances. The easiest way to recreate the problem is by opening gnome-terminal, opening a second tab then typing exit. You will not be able to type into the window in the remaining tab. Right-clicking, then left-clicking returns the keyboard focus to the window. I can't reproduce this (running gnome with metacity). It doesn't appear to be a desktop issue, as I can recreate it both in fluxbox and gnome. The problem renders eclipse nearly unusable, as the keyboard focus is taken away from the editor every time an auto-completion or hover information window is shown (and the same trick needed to return it). I usually use click-to focus, but I've also tried different focus models with the same behavior. (I'm using focus follows mouse) I'm sorry if this isn't the right package to file this against, but it's the only common factor that I can see in a problem which spans desktops and applications. I'm afraid focus is entirely under the control of the window manager, so I suggest you file bugs against the ones you use. Cheers, Julien signature.asc Description: Digital signature
Bug#589873: grub-pc: fails to install in mbr during postinstall
On Saturday 24 July 2010 06:36:01 Mario 'BitKoenig' Holbe wrote: On Thu, Jul 22, 2010 at 09:37:15PM +0100, Colin Watson wrote: Could you try 1.98+20100722-1 once it's available? I think it may fix this. For me it did: Richte grub-common ein (1.98+20100722-1) ... Richte grub-pc ein (1.98+20100722-1) ... Installation finished. No error reported. Installation finished. No error reported. Installation finished. No error reported. Generating grub.cfg ... Sad to say: nope, it doesn't... Setting up grub-pc (1.98+20100722-1) ... /usr/sbin/grub-probe: error: unknown filesystem. Auto-detection of a filesystem module failed. Please specify the module with the option `--modules' explicitly. # /usr/sbin/grub-probe -vv --device-map=/boot/grub/device.map --target=fs --device /dev/md0 ... /usr/sbin/grub-probe: info: opening md0. kern/disk.c:245: Opening `md0'... disk/raid.c:134: md0: total_devs=3, disk_size=481664 disk/raid.c:163: md0: level=1, total_sectors=481664 ... kern/fs.c:54: Detecting ext2... kern/fs.c:60: ext2 detection failed. ... # mdadm -E /dev/sda2 /dev/sda2: Magic : a92b4efc Version : 0.90.00 ... Raid Level : raid1 Used Dev Size : 240832 (235.23 MiB 246.61 MB) Array Size : 240832 (235.23 MiB 246.61 MB) Raid Devices : 3 Total Devices : 2 Preferred Minor : 0 ... regards Mario -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590144: youtube-dl: Changelog claims support removed for -b and -f, but upstream removed -b and -d (NEWS correct)
Package: youtube-dl Version: 2010.07.14-1 Severity: minor The Debian changelog for youtube-dl 2010.07.22-1 says: + removed command line options -b and -f. However, upstream actually removed -b and -d; -f still exists. NEWS has it correct: The upstream author has removed support for the -b (best format) and the -d (high def) command line options. - Josh Triplett -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590101: Patch for binutils-2.20.51.20100710-2 to allow a static build option for crosscompilers
On 23.07.2010 19:07, Jim Heck wrote: Package: binutils Version: 2.20.1-11 Severity: wishlist Tags: patch Here is a simple patch for your consideration that modifies the rules makefile for the binutils package to allow an option to build statically when creating a cross compiler by passing the environment variable 'BUILD_STATIC=yes' on the command line to dpkg-buildpackage. The rationale for providing the ability to compile a statically linked binutils is to allow greater portability of that toolchain to environments other than the stock Debian environment in which the toolchain was built. This becomes especially interesting in the embedded world where cross compilers (such as ones that can be created in Debian) have long lifetimes and can be deployed to varied buildserver enviroments to support cross compiling software for target embedded systems. It removes the dependence on such things as having the exact correct version of GLIBC (and other libraries) installed on the buildserver and makes the toolchain standalone. A static toolchain also provides the ultimate in repeatablilty, since it does not depend on dynamically loadable modules that can change on the build system. The patch required a simple change to allow an intermediate build target that performs a make on the target 'configure-host' prior to doing the full make with the additional LDFLAGS=-all-static, which gets passed to libtool to create static binaries. Without the intermediate target, configuration would fail when it tries to test gcc and passes the unknown -all-static flag to gcc. I have tested this patch by using dpkg-buildpackage to build binutils version 2.20.51.20100710-2. The resulting binaries were not dynamic. The resulting binutils package was then used to compile gcc-4.4-4.4.4-7 (for which am am submitting a similar patch). this looks ok, but please could you consider passing a string within DEB_BUILD_OPTIONS, e.g cross-static? Matthias -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590145: chromium-browser: Upstream ban on gecko-mediaplayer plugin must be removed
Package: chromium-browser Version: 5.0.375.99~r51029-4 Severity: normal The plugin gecko-mediaplayer was blacklisted in the upstream some time ago because of bug #24507, that is speciffic to several other Linux distributions. Debian was never amongst the distributions where this bug appeared and gecko-mediaplayer is currently the only plugin of this kind that is usable, supported and reliable. Because of this the blacklisting can and must be removed from Debian port. I am using this plugin constantly and since the ban was forced to manually edit both chrome and chromium binaries after each upgrade on each computer. Fortunately this also means i can assure that the plugin continues to work fine on Debian with all stable and development versions of Chromium and Chrome released since it was blacklisted. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: i386 (x86_64) Kernel: Linux 2.6.32-2-amd64 (SMP w/1 CPU core) Locale: LANG=bg_BG.CP1251, LC_CTYPE=bg_BG.CP1251 (charmap=CP1251) (ignored: LC_ALL set to bg_BG.CP1251) Shell: /bin/sh linked to /bin/bash Versions of packages chromium-browser depends on: ii chromium-browser-ins 5.0.375.99~r51029-4 page inspector for the chromium-br ii libasound2 1.0.23-1shared library for ALSA applicatio ii libatk1.0-0 1.30.0-1The ATK accessibility toolkit ii libbz2-1.0 1.0.5-4 high-quality block-sorting file co ii libc62.11.2-2Embedded GNU C Library: Shared lib ii libcairo21.9.8-1 The Cairo 2D vector graphics libra ii libdbus-1-3 1.2.24-2simple interprocess messaging syst ii libdbus-glib-1-2 0.86-1 simple interprocess messaging syst ii libevent-1.4-2 1.4.13-stable-1 An asynchronous event notification ii libexpat12.0.1-7 XML parsing C library - runtime li ii libfontconfig1 2.8.0-2.1 generic font configuration library ii libfreetype6 2.4.0-2 FreeType 2 font engine, shared lib ii libgcc1 1:4.4.4-7 GCC support library ii libgconf2-4 2.28.1-3GNOME configuration database syste ii libgl1-mesa-glx [lib 7.8.1-2 A free implementation of the OpenG ii libglewmx1.5 1.5.4-1 The OpenGL Extension Wrangler - ru ii libglib2.0-0 2.24.1-1The GLib library of C routines ii libgtk2.0-0 2.20.1-1The GTK+ graphical user interface ii libicu44 4.4.1-5 International Components for Unico ii libjpeg626b1-1 The Independent JPEG Group's JPEG ii libnspr4-0d 4.8.4-2 NetScape Portable Runtime Library ii libnss3-1d 3.12.6-3Network Security Service libraries ii libpango1.0-01.28.1-1Layout and rendering of internatio ii libpng12-0 1.2.44-1PNG library - runtime ii libprotobuf6 2.3.0-2.1 protocol buffers C++ library ii libstdc++6 4.4.4-7 The GNU Standard C++ Library v3 ii libv8-2.2.18 2.2.18-1V8 JavaScript Engine ii libvpx0 0.9.1-1 VP8 video codec (shared library) ii libx11-6 2:1.3.3-3 X11 client-side library ii libxext6 2:1.1.2-1 X11 miscellaneous extension librar ii libxml2 2.7.7.dfsg-4GNOME XML library ii libxrender1 1:0.9.6-1 X Rendering Extension client libra ii libxslt1.1 1.1.26-5XSLT 1.0 processing library - runt ii libxss1 1:1.2.0-2 X11 Screen Saver extension library ii xdg-utils1.0.2+cvs20100307-1 desktop integration utilities from ii zlib1g 1:1.2.3.4.dfsg-3compression library - runtime chromium-browser recommends no packages. Versions of packages chromium-browser suggests: ii chromium-browser-l10 5.0.375.99~r51029-4 chromium-browser language packages -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#588533: gprbuild 1.4.1 breaks QtAda
gprbuild 1.4.1 has a bug that breaks QtAda, so I'm waiting for 1.5. The bug has been fixed in AdaCore's development version; I may try to backport the fix. -- -- Stephe -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590146: apt-listbugs: unhelpful error message on broken archive
Package: apt-listbugs Version: 0.1.3 Severity: normal Reading package fields... 0%/usr/lib/ruby/1.8/debian/ar.rb:111:in `initialize': archive broken (Debian::ArError) from /usr/lib/ruby/1.8/debian.rb:139:in `new' from /usr/lib/ruby/1.8/debian.rb:139:in `load' from /usr/lib/ruby/1.8/debian.rb:82:in `field' from /usr/share/apt-listbugs/apt-listbugs/logic.rb:733:in `field' from /usr/share/apt-listbugs/apt-listbugs/logic.rb:751:in `create' from /usr/share/apt-listbugs/apt-listbugs/logic.rb:743:in `each_index' from /usr/share/apt-listbugs/apt-listbugs/logic.rb:743:in `create' from /usr/sbin/apt-listbugs:323 E: Sub-process /usr/sbin/apt-listbugs apt || exit 10 returned an error code (10) E: Failure running script /usr/sbin/apt-listbugs apt || exit 10 I had this happen after the system crashed during package download. It would be extremely helpful if apt-listbugs would say _WHICH_ package is broken. Greetings Marc -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.34.1-zgws1 (SMP w/2 CPU cores; PREEMPT) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages apt-listbugs depends on: ii apt 0.7.25.3Advanced front-end for dpkg ii libdpkg-ruby1.8 0.3.6 modules/classes for dpkg on ruby 1 ii libgettext-ruby1.8 2.1.0-2.1 Gettext for ruby1.8 ii libhttp-access2-ruby1.8 2.1.5.2-2 HTTP accessing library for ruby (t ii libruby1.8 [libzlib-ruby1.8] 1.8.7.299-1 Libraries necessary to run Ruby 1. ii libxml-parser-ruby1.80.7.1-1 Interface of expat for the scripti ii ruby 4.5 An interpreter of object-oriented apt-listbugs recommends no packages. Versions of packages apt-listbugs suggests: ii debianutils 3.3 Miscellaneous utilities specific t ii elinks-lite [www-browser] 0.12~pre5-2 advanced text-mode WWW browser - l ii iceweasel [www-browser] 3.5.10-1 Web browser based on Firefox ii kazehakase [www-browser]0.5.8-4 GTK+-based web browser that allows ii konqueror [www-browser] 4:4.4.4-1KDE 4's advanced file manager, web ii links2 [www-browser]2.2-1+b2 Web browser running in both graphi ii lynx-cur [www-browser] 2.8.8dev.4-2 Text-mode WWW Browser with NLS sup ii reportbug 4.12.4 reports bugs in the Debian distrib -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590148: pulseaudio: no sound in firefox/iceweasel after suspend/resume
Package: pulseaudio
Version: 0.9.21-3
Severity: normal
As per subject line: After suspend/resume sound output from iceweasel does not
work. In order to restore it I have to not only quit and restart iceweasel but
also to start pamaņ, go to clients, look for ALSA plug-in
[plugin-container] and kill this client.
For me, this bug is 100% reproducible, the only workaround is to exit iceweasel
before suspend.
I have a Lenovo 3000 N100 laptop with an hda-intel soundcard, and the
pulseaudio pseudo device is the default device for alsa, this is my asoundrc:
pcm.pulse {
type pulse
}
ctl.pulse {
type pulse
}
pcm.!default {
type pulse
}
ctl.!default {
type pulse
}
If any additional information is needed, I would need some guidance regarding
what exactly I have to provide...
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (101, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages pulseaudio depends on:
ii adduser 3.112 add and remove users and groups
ii consolekit0.4.1-4framework for defining and trackin
ii libasound21.0.23-1 shared library for ALSA applicatio
ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib
ii libcap2 1:2.17-2 support for getting/setting POSIX.
ii libdbus-1-3 1.2.24-1 simple interprocess messaging syst
ii libgdbm3 1.8.3-9GNU dbm database routines (runtime
ii libice6 2:1.0.6-1 X11 Inter-Client Exchange library
ii libltdl7 2.2.6b-2 A system independent dlopen wrappe
ii libpulse0 0.9.21-3 PulseAudio client libraries
ii libsamplerate00.1.7-3Audio sample rate conversion libra
ii libsm62:1.1.1-1 X11 Session Management library
ii libsndfile1 1.0.21-2 Library for reading/writing audio
ii libspeexdsp1 1.2~rc1-1 The Speex extended runtime library
ii libudev0 158-1 libudev shared library
ii libx11-6 2:1.3.3-3 X11 client-side library
ii libxtst6 2:1.1.0-3 X11 Testing -- Record extension li
ii lsb-base 3.2-23.1 Linux Standard Base 3.2 init scrip
ii udev 158-1 /dev/ and hotplug management daemo
Versions of packages pulseaudio recommends:
ii gstreamer0.10-pulseaudio 0.10.23-4 GStreamer plugin for PulseAudio
ii libasound2-plugins1.0.23-1 ALSA library additional plugins
ii pulseaudio-esound-compat 0.9.21-3 PulseAudio ESD compatibility layer
ii pulseaudio-module-x11 0.9.21-3 X11 module for PulseAudio sound se
Versions of packages pulseaudio suggests:
ii paman 0.9.4-1PulseAudio Manager
ii paprefs 0.9.9-2PulseAudio Preferences
ii pavucontrol 0.9.9-1PulseAudio Volume Control
ii pavumeter 0.9.3-1PulseAudio Volume Meter
ii pulseaudio-utils 0.9.21-3 Command line tools for the PulseAu
-- Configuration Files:
/etc/pulse/daemon.conf changed:
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file =
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
; resample-method = speex-float-3
; enable-remixing = yes
; enable-lfe-remixing = no
; flat-volumes = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 100
; default-sample-format = s16le
; default-sample-rate = 44100
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
; default-fragment-size-msec = 25
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590147: akregator crashes at start
Package: akregator Version: 4:4.4.4-1 Severity: important All of sudden, akregator now fails to start with graphical error message Could not find the Akregator part; please check your installation and then crashes. I also tried reinstalling the akregator package with no success. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages akregator depends on: ii kdebase-runtime 4:4.4.3-1runtime components from the offici ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib ii libgcc1 1:4.5-20100321-1 GCC support library ii libkde3support4 4:4.4.3-1the KDE 3 Support Library for the ii libkdecore5 4:4.4.3-1the KDE Platform Core Library ii libkdepim4 4:4.4.4-1KDE PIM library ii libkdeui5 4:4.4.3-1the KDE Platform User Interface Li ii libkhtml5 4:4.4.3-1the KHTML Web Content Rendering En ii libkio5 4:4.4.3-1the Network-enabled File Managemen ii libknotifyconfig4 4:4.4.3-1library for configuring KDE Notifi ii libkontactinterface44:4.4.3-1Kontact interface library ii libkparts4 4:4.4.3-1the Framework for the KDE Platform ii libkpimutils4 4:4.4.3-1library for dealing with email add ii libkutils4 4:4.4.3-1various utility classes for the KD ii libqt4-dbus 4:4.6.3-1Qt 4 D-Bus module ii libqt4-xml 4:4.6.3-1Qt 4 XML module ii libqtcore4 4:4.6.3-1Qt 4 core module ii libqtgui4 4:4.6.3-1Qt 4 GUI module ii libstdc++6 4.5-20100321-1 The GNU Standard C++ Library v3 ii libsyndication4 4:4.4.3-1parser library for RSS and Atom fe akregator recommends no packages. akregator suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#580708:
I fixed this by rebuilding with -serial stdio removed from qemubuilder.c. signature.asc Description: This is a digitally signed message part
Bug#590149: gnome-user-share: Fails to recieve all contacts from k660i
Subject: gnome-user-share: Fails to recieve all contacts from k660i Package: gnome-user-share Version: 2.30.0-1 Severity: normal *** Please type your report below this line *** I am trying to transfer all my contacts from a Sony-Ericsson K660i. I select to send by bluetooth, select my computer and a moment later the phone claims that the remote unit did not accept the file. In a short flash, the phone shows a message that it is sending the file Whole-Ph~.vcf. I have attached hcidump of the session. Sending single contacts (vCard.vcf) or other files (mp3, photos, videos) works just fine. Is the ~ in the file name the problem? Best regards /Rasmus Bøg Hansen -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.34.1 (SMP w/2 CPU cores) Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to da_DK.UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages gnome-user-share depends on: ii apache2.2-bin 2.2.15-5 Apache HTTP Server common binary f ii gconf22.28.1-3 GNOME configuration database syste ii gnome-bluetooth 2.30.0-2 GNOME Bluetooth tools ii libapache2-mod-dnssd 0.6-2 Zeroconf support for Apache 2 via ii libatk1.0-0 1.30.0-1 The ATK accessibility toolkit ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib ii libcairo2 1.8.10-4 The Cairo 2D vector graphics libra ii libcanberra-gtk0 0.24-1 Gtk+ helper for playing widget eve ii libcanberra0 0.24-1 a simple abstract interface for pl ii libdbus-1-3 1.2.24-1 simple interprocess messaging syst ii libdbus-glib-1-2 0.86-1 simple interprocess messaging syst ii libfontconfig12.8.0-2.1 generic font configuration library ii libfreetype6 2.4.0-2FreeType 2 font engine, shared lib ii libgconf2-4 2.28.1-3 GNOME configuration database syste ii libglib2.0-0 2.24.1-1 The GLib library of C routines ii libgnome-bluetooth7 2.30.0-2 GNOME Bluetooth tools - support li ii libgtk2.0-0 2.20.1-1 The GTK+ graphical user interface ii libnautilus-extension12.30.1-1 libraries for nautilus components ii libnotify1 [libnotify1-gtk2.1 0.5.0-2sends desktop notifications to a n ii libpango1.0-0 1.28.1-1 Layout and rendering of internatio ii libselinux1 2.0.94-1 SELinux runtime shared libraries ii libunique-1.0-0 1.1.6-1Library for writing single instanc ii libx11-6 2:1.3.3-3 X11 client-side library ii obex-data-server 0.4.5-1+b1 D-Bus service for OBEX client and gnome-user-share recommends no packages. gnome-user-share suggests no packages. -- no debconf information -- Rasmus Bøg Hansen || mo...@zz9.dk C.F. Møllers Allé 46, 3tv || http://www.zz9.dk 2300 København S || HCI sniffer - Bluetooth packet analyzer ver 1.42 device: hci0 snap_len: 1028 filter: 0x HCI Event: Connect Request (0x04) plen 10 HCI Command: Accept Connection Request (0x01|0x0009) plen 7 HCI Event: Command Status (0x0f) plen 4 HCI Event: Role Change (0x12) plen 8 HCI Event: Connect Complete (0x03) plen 11 HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 HCI Event: Command Status (0x0f) plen 4 HCI Event: Read Remote Supported Features (0x0b) plen 11 HCI Command: Remote Name Request (0x01|0x0019) plen 10 HCI Event: Command Status (0x0f) plen 4 HCI Event: Max Slots Change (0x1b) plen 3 ACL data: handle 11 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 1 scid 0x0048 ACL data: handle 11 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0048 result 1 status 0 Connection pending - No futher information available ACL data: handle 11 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 HCI Event: Number of Completed Packets (0x13) plen 5 ACL data: handle 11 flags 0x02 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x ACL data: handle 11 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0048 result 0 status 0 Connection successful ACL data: handle 11 flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4 MTU 1024 ACL data: handle 11 flags 0x02 dlen 18 L2CAP(s): Config rsp: scid 0x0048 flags 0x00 result 0 clen 4 MTU 1024 ACL data: handle 11 flags 0x02 dlen 12 L2CAP(s): Config req: dcid 0x0048 flags 0x00 clen 0 HCI Event: Remote Name Req Complete (0x07) plen 255 HCI Event: Number of Completed Packets (0x13) plen 5 ACL data: handle 11 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00
Bug#590150: logwatch: Logwatch doesn't detect freshclam.log
Package: logwatch Version: 7.3.6.cvs20080702-2 Severity: normal Logwatch gives the following message in the reports. I tried adding 'LogFile = /var/log/clamav/freshclam.log' to '/usr/share/logwatch/dist.conf/logfiles/clam-update.conf' and '/etc/logwatch/conf/logfiles/clam-update.conf' I think that the problem is that logwatch searches in the wrong directory: grep /var/log/clam-update /usr/share/logwatch/default.conf/logfiles/clam-update.conf # /var/log/clam-update - clam-update Begin No updates detected in the log for the freshclam daemon (the ClamAV update process). If the freshclam daemon is not running, you may need to restart it. Other options: A. If you no longer wish to run freshclam, deleting the log file (default is freshclam.log) will suppress this error message. B. If you use a different log file, update the appropriate configuration file. For example: echo LogFile = log_file /etc/logwatch/conf/logfiles/clam-update.conf where log_file is the filename of the freshclam log file. C. If you are logging using syslog, you need to indicate that your log file uses the syslog format. For example: echo *OnlyService = freshclam /etc/logwatch/conf/logfiles/clam-update.conf echo *RemoveHeaders /etc/logwatch/conf/logfiles/clam-update.conf -- System Information: Debian Release: 5.0.5 APT prefers stable APT policy: (700, 'stable'), (650, 'testing'), (600, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.30-bpo.1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages logwatch depends on: ii perl 5.10.0-19lenny2 Larry Wall's Practical Extraction ii postfix [mail-transport- 2.5.5-1.1 High-performance mail transport ag Versions of packages logwatch recommends: ii libdate-manip-perl5.54-1 a perl library for manipulating da Versions of packages logwatch suggests: pn fortune-mod none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590151: iceweasel: Spurious horizontal lines when zooming
Package: iceweasel
Version: 3.5.10-1
Severity: normal
When zooming in on the site http://ocaml.janestcapital.com/ spurious
horizontal lines appear (see attached screenshot).
-- Package-specific info:
-- Extensions information
Name: Default
Location: /usr/lib/iceweasel/extensions/{972ce4c6-7e08-4474-a285-3208198ce6fd}
Package: iceweasel
Status: enabled
Name: It's All Text!
Location:
/usr/share/mozilla/extensions/{ec8030f7-c20a-464f-9b0e-13a3a9e97384}/itsallt...@docwhat.gerf.org
Package: xul-ext-itsalltext
Status: enabled
Name: Live HTTP headers
Location: ${PROFILE_EXTENSIONS}/{8f8fe09b-0bd3-4470-bc1b-8cad42b8203a}
Status: enabled
Name: United States English Dictionary
Location: ${PROFILE_EXTENSIONS}/en...@dictionaries.addons.mozilla.org
Status: enabled
-- Plugins information
Name: DivX® Web Player
Location: /usr/lib/mozilla/plugins/libtotem-mully-plugin.so
Package: totem-mozilla
Status: enabled
Name: Java(TM) Plug-in 1.6.0_20
Location: /usr/lib/jvm/java-6-sun-1.6.0.20/jre/lib/amd64/libnpjp2.so
Package: sun-java6-bin
Status: enabled
Name: QuickTime Plug-in 7.6.6
Location: /usr/lib/mozilla/plugins/libtotem-narrowspace-plugin.so
Package: totem-mozilla
Status: enabled
Name: Shockwave Flash
Location: /usr/lib/nspluginwrapper/plugins/npwrapper.libflashplayer.so
Status: enabled
Name: VLC Multimedia Plugin (compatible Totem 2.30.2)
Location: /usr/lib/mozilla/plugins/libtotem-cone-plugin.so
Package: totem-mozilla
Status: enabled
Name: Windows Media Player Plug-in 10 (compatible; Totem)
Location: /usr/lib/mozilla/plugins/libtotem-gmp-plugin.so
Package: totem-mozilla
Status: enabled
-- Addons package information
ii iceweasel 3.5.10-1 Web browser based on Firefox
ii sun-java6-bin 6.20-dlj-1 Sun Java(TM) Runtime Environment (JRE) 6 (ar
ii totem-mozilla 2.30.2-2+b1Totem Mozilla plugin
ii xul-ext-itsall 1.4.1-1Iceweasel/Firefox extension to edit textarea
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (900, 'testing'), (400, 'unstable'), (100, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.34.1 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL
set to en_US.UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages iceweasel depends on:
ii debianutils 3.3Miscellaneous utilities specific t
ii fontconfig2.8.0-2.1 generic font configuration library
ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib
ii libglib2.0-0 2.24.1-1 The GLib library of C routines
ii libgtk2.0-0 2.20.1-1 The GTK+ graphical user interface
ii libnspr4-0d 4.8.4-2NetScape Portable Runtime Library
ii libstdc++64.4.4-6The GNU Standard C++ Library v3
ii procps1:3.2.8-9 /proc file system utilities
ii xulrunner-1.9.1 1.9.1.10-1 XUL + XPCOM application runner
iceweasel recommends no packages.
Versions of packages iceweasel suggests:
ii libgssapi-krb5-21.8.1+dfsg-5 MIT Kerberos runtime libraries - k
ii mathematica-fonts [ttf-math 12 Installer of Mathematica fonts
pn mozplugger none (no description available)
ii ttf-lyx 1.6.6-2 TrueType versions of some TeX font
ii xfonts-mathml 4Type1 Symbol font for MathML
pn xprint none (no description available)
Versions of packages xulrunner-1.9.1 depends on:
ii libasound2 1.0.23-1 shared library for ALSA applicatio
ii libatk1.0-0 1.30.0-1 The ATK accessibility toolkit
ii libbz2-1.0 1.0.5-4 high-quality block-sorting file co
ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib
ii libcairo2 1.8.10-4 The Cairo 2D vector graphics libra
ii libdbus-1-3 1.2.24-1 simple interprocess messaging syst
ii libfontconfig1 2.8.0-2.1generic font configuration library
ii libfreetype62.4.0-2 FreeType 2 font engine, shared lib
ii libgcc1 1:4.4.4-6GCC support library
ii libglib2.0-02.24.1-1 The GLib library of C routines
ii libgtk2.0-0 2.20.1-1 The GTK+ graphical user interface
ii libhunspell-1.2-0 1.2.11-1 spell checker and morphological an
ii libjpeg62 6b1-1The Independent JPEG Group's JPEG
ii libmozjs2d 1.9.1.10-1 The Mozilla SpiderMonkey JavaScrip
ii libnspr4-0d 4.8.4-2 NetScape Portable Runtime Library
ii libnss3-1d 3.12.6-2 Network Security Service libraries
ii libpango1.0-0 1.28.1-1 Layout and rendering of internatio
ii libpng12-0 1.2.44-1 PNG library - runtime
Bug#495800: xpdf in Debian has been switched to use poppler
Hi,
On Wed, 21 Jul 2010 09:44:56 +0900
Osamu Aoki os...@debian.org wrote:
I just sponsored new xpdf 3.02-9 package which uses poppler as its
backend. This means we will not be using xpdf-*(language) packages and
they were removed from unstable.
(Actually, xpdf had few more changes by me.)
Have you sent request to RM those xpdf-{cjk} packages?
Does this bug still valid here?
http://bugs.debian.org/495800
It is okay to be closed by your upload, now xpdf looks poppler-data with
its configuration file.
--
Regards,
Hideki Yamane henrich @ debian.or.jp/org
http://wiki.debian.org/HidekiYamane
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590113: evolution: Option to suppress viewing of HTML only email no longer works
On Sat, 2010-07-24 at 07:42 +0200, Yves-Alexis Perez wrote: Thanks for your bug report, but that does look like an upstream issue, please file the bug directly upstream, as reportbug should have told you. OK, I've submitted it upstream: https://bugzilla.gnome.org/show_bug.cgi?id=625169 Reportbug didn't really give much guidance on where to submit bugs. The only place upstream was mentioned was as an option under Do any of the following apply to this report?, where 'upstream' was defined as This bug applies to the upstream part of the package. I wasn't exactly sure what that meant or if it applied, so didn't select it. Regards -- Tixy -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#576186: [pkg-cryptsetup-devel] Bug#576186: cryptsetup: Setting up crypto device on Startup takes too long w/ ext3
Hi Jonas, this time with MILAN and bugs.debian.org in CC. Sorry for my long reply time. On Sun, 18 Jul 2010 22:51:07 +0200 Jonas Meurer jo...@freesources.org wrote: On 08/07/2010 Jonas Meurer wrote: Last line before prompting for passphrase is like: cryptsetup -c -aes-... --key-file=- create cryptofs /dev/sda3 After waiting 50 secs, first line is: '[' -z /lib/cryptsetup/checks/vol_id ']' this verifies, that the delay is caused by cryptsetup binary, not by anything else from the initscript. The weired thing is: When I type in the passphrase, I have to wait 60 secs before the bootup process continues. But if I just wait 60 seconds and type in the passphrase afterwards, the bootup process continues immediately. you could check the unlocking by booting into single user runlevel (init=1), and manually invoking # cryptsetup -c aes-cbc-essiv:sha256 create cryptofs /dev/sda3 simply let the unlocking process fail three times (wrong passphrase), and the boot process will stop at runlevel 1 with an emergency shell. there you can test the manual unlocking of encrypted device. If I try to let the unlocking process fail the first time, I have to wait 60 seconds anyway. After those 60 seconds, the following unlocking tries will work instantly. So in addition, I bought another harddisk from a different manufacturer. I copied the partition table, created a new encrypted partition and copied the whole system using the rsync command. So now I have the same files on both disks. If I use the new disk, there is no delay. Therefore this is not a configuration issue, since all configuration files are the same. Next step could be to wipe the 60-second disk and provide it with a new encrypted partition. But if I do this, the bad thing is we don't get to find out what ever caused the delay. Best regards, Markus -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590152: gcc-4.5: ‘c_maybe_const_expr’ not supported by pp_c_expression
Package: gcc-4.5
Version: 4.5.0-8
Severity: minor
Justification: confusing error message
| $ cat testcase.c
| void foo(const char *p, int cond, int a, int b)
| {
| p[cond ? a : b] = '\0';
| }
| $ gcc-4.5 -c testcase.c
| #‘c_maybe_const_expr’ not supported by pp_c_expression#) != 0 ? (unsigned
int)a : (unsigned int)b) * 1u))’testcase.c: In function ‘foo’:
| testcase.c:3:2: error: assignment of read-only location
| $ gcc-4.4 -c testcase.c
| testcase.c: In function ‘foo’:
| testcase.c:3: error: assignment of read-only location ‘*(p + (cond != 0 ?
(unsigned int)a : (unsigned int)b))’
The message is hard to decipher and missing a trailing newline.
As far as bugs go, it is only cosmetic, but presumably it supposed
to diagnose something deeper.
Is this about range checking?
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#531062: mercurial: embeds a part of python-urlgrabber
submitter 531062 ! close 531062 thanks * Jakub Wilk uba...@users.sf.net, 2009-05-29, 18:50: Mercurial embeds a (modified) copy of keepalive.py, which is a part python-urlgrabber. keepalive.py is no longer shipped by python-urlgrabber, so I'm closing this bug. -- Jakub Wilk signature.asc Description: Digital signature
Bug#590153: Suggested changes
Package: sbuild
Version: 0.60.0-2
Severity: normal
Tags: patch
Justification: Policy 9.3.2
User: ubuntu-de...@lists.ubuntu.com
Usertags: origin-ubuntu maverick ubuntu-patch
Hi,
In ubuntu we applied the following changes:
- buildd: Declare Replaces and Breaks on ubuntu-dev-tools (= 0.83) as
both packages contain /usr/bin/buildd. (LP: #558461)
- lib/Sbuild/Build.pm, Utility.pm: remove assumptions about filenames
in dsc (Closes: 559533).
And we believe you might be interested too. Attaching the patch with those
changes.
diff -pruN 0.60.0-2/debian/control 0.60.0-2ubuntu1/debian/control
--- 0.60.0-2/debian/control 2010-02-23 22:34:33.0 +
+++ 0.60.0-2ubuntu1/debian/control 2010-07-24 00:34:27.0 +0100
@@ -1,7 +1,8 @@
Source: sbuild
Section: devel
Priority: extra
Maintainer: Debian buildd-tools Developers buildd-tools-de...@lists.alioth.debian.org
Uploaders: Michael Banck mba...@debian.org, Roger Leigh rle...@debian.org, Francesco Paolo Lovergine fran...@debian.org
Build-Depends: debhelper ( 7.0.0)
Standards-Version: 3.8.4
@@ -59,7 +60,8 @@ Package: buildd
Architecture: all
Depends: ${misc:Depends}, ${perl:Depends}, libsbuild-perl, adduser, sbuild (= ${source:Version}), dupload, cron, exim4 | mail-transport-agent
Suggests: wanna-build
-Replaces: sbuild
+Replaces: sbuild, ubuntu-dev-tools (= 0.83)
+Breaks: ubuntu-dev-tools (= 0.83)
Description: Daemon for automatically building Debian binary packages from Debian sources
The sbuild suite of programs (wanna-build, buildd and sbuild) are
used to build binary packages from source packages. The wanna-build
diff -pruN 0.60.0-2/lib/Sbuild/Build.pm 0.60.0-2ubuntu1/lib/Sbuild/Build.pm
--- 0.60.0-2/lib/Sbuild/Build.pm 2010-07-24 00:38:13.0 +0100
+++ 0.60.0-2ubuntu1/lib/Sbuild/Build.pm 2010-07-24 00:34:27.0 +0100
@@ -44,7 +44,7 @@ use Sbuild::Sysconfig qw($version $relea
use Sbuild::Conf;
use Sbuild::LogBase qw($saved_stdout);
use Sbuild::Sysconfig;
-use Sbuild::Utility qw(check_url download parse_file);
+use Sbuild::Utility qw(check_url download dsc_files);
use Sbuild::AptitudeBuildDepSatisfier;
use Sbuild::InternalBuildDepSatisfier;
@@ -453,7 +453,7 @@ sub fetch_source_files {
my $ver = $self-get('OVersion');
my $arch = $self-get('Arch');
-my ($files, @other_files, $dscarchs, $dscpkg, $dscver, @fetched);
+my ($dscarchs, $dscpkg, $dscver, @fetched);
my $build_depends = ;
my $build_depends_indep = ;
@@ -479,7 +479,8 @@ sub fetch_source_files {
$file = download($self-get('DSC')) or
$self-log_error(Could not download . $self-get('DSC')) and
return 0;
- my @cwd_files = $self-dsc_files($file);
+ debug(Parsing $dsc\n);
+ my @cwd_files = dsc_files($file);
if (-f $dir/$dsc) {
# Copy the local source files into the build directory.
$self-log_subsubsection(Local sources);
@@ -669,10 +670,6 @@ sub fetch_source_files {
$dsctext =~ /^Version:\s*(.*)$/mi and $dscver = $1;
$self-set_version(${dscpkg}_${dscver});
-$dsctext =~ /^Files:\s*\n((\s+.*\s*\n)+)/mi and $files = $1;
-@other_files = map { (split( /\s+/, $_ ))[3] } split( \n, $files );
-$files =~ /(\Q$pkg\E.*orig.tar.gz)/mi and $orig = $1;
-
$self-log_subsubsection(Check arch);
if (!$dscarchs) {
$self-log($dsc has no Architecture: field -- skipping arch check!\n);
@@ -712,19 +709,15 @@ sub build {
my $dscfile = $self-get('DSC File');
my $dscdir = $self-get('DSC Dir');
-my $pkgv = $self-get('Package_Version');
+my $pkg = $self-get('Package');
my $build_dir = $self-get('Chroot Build Dir');
my $arch = $self-get('Arch');
my( $rv, $changes );
local( *PIPE, *F, *F2 );
-$pkgv = $self-fixup_pkgv($pkgv);
$self-log_subsection(Build);
$self-set('This Space', 0);
-$pkgv =~ /^([a-zA-Z\d.+-]+)_([a-zA-Z\d:.+~-]+)/;
-# Note, this version contains .dsc.
-my ($pkg, $version) = ($1,$2);
my $tmpunpackdir = $dscdir;
$tmpunpackdir =~ s/-.*$/.orig.tmp-nest/;
@@ -1793,18 +1786,6 @@ sub check_watches {
$self-log(\n);
}
-
-sub fixup_pkgv {
-my $self = shift;
-my $pkgv = shift;
-
-$pkgv =~ s,^.*/,,; # strip path
-$pkgv =~ s/\.(dsc|diff\.gz|tar\.gz|deb)$//; # strip extension
-$pkgv =~ s/_[a-zA-Z\d+~-]+\.(changes|deb)$//; # strip extension
-
-return $pkgv;
-}
-
sub format_deps {
my $self = shift;
@@ -1919,27 +1900,6 @@ sub debian_files_list {
return @list;
}
-sub dsc_files {
-my $self = shift;
-my $dsc = shift;
-my @files;
-
-debug(Parsing $dsc\n);
-
-# The parse_file() subroutine returns a ref to an array of hashrefs.
-my $stanzas = parse_file($dsc);
-
-# A dsc file would only ever contain one stanza, so we only deal with
-# the first entry which is a ref to a hash of fields for the stanza.
-my $stanza = @{$stanzas}[0];
-
-# We're only interested in the name of the files in the Files field.
-my $entry = ${$stanza}{'Files'};
-
Bug#590154: openldap: [INTL:it] Italian debconf translation
Package: openldap Severity: wishlist Tags: l10n, patch Hello, please update the Italian debconf templates translation (attached). Regards, Luca it.po Description: Binary data
Bug#590105: SATA drive not detected during squeeze installation on Buffalo LinkStation (squeeze)
* Ryan Tandy tarp...@gmail.com [2010-07-23 20:39]: On 23/07/2010 12:10 PM, Martin Michlmayr wrote: Ryan, something for you: In fact, I was hoping you'd have some idea. Not really since I don't know anything about the Linkstation. -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590155: network-manager-gnome: nm-applet sometimes displays as a black rectangle in the notification area
Package: network-manager-gnome Version: 0.8-1 Severity: normal About 1/3 of the time when I log on, nm-applet shows up as a black rectangle in the notification area. Also, if I right click on the rectangle the contextual menu is the same as if I right click on a blank part of the notification area instead of the network manager's contextual menu. If I log out then log back on, the icon and contextual menu will generally be restored. I noticed this when I started using the Compiz Fusion icon, so it's likely linked to that. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages network-manager-gnome depends on: ii dbus-x111.2.24-1 simple interprocess messaging syst ii gconf2 2.28.1-3 GNOME configuration database syste ii gnome-icon-theme2.30.3-1 GNOME Desktop icon theme ii libatk1.0-0 1.30.0-1 The ATK accessibility toolkit ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib ii libcairo2 1.8.10-4 The Cairo 2D vector graphics libra ii libdbus-1-3 1.2.24-1 simple interprocess messaging syst ii libdbus-glib-1-20.86-1 simple interprocess messaging syst ii libfontconfig1 2.8.0-2.1generic font configuration library ii libfreetype62.4.0-2 FreeType 2 font engine, shared lib ii libgconf2-4 2.28.1-3 GNOME configuration database syste ii libglade2-0 1:2.6.4-1library to load .glade files at ru ii libglib2.0-02.24.1-1 The GLib library of C routines ii libgnome-bluetooth7 2.30.0-2 GNOME Bluetooth tools - support li ii libgnome-keyring0 2.30.1-1 GNOME keyring services library ii libgtk2.0-0 2.20.1-1 The GTK+ graphical user interface ii libnm-glib-vpn1 0.8-1network management framework (GLib ii libnm-glib2 0.8-1network management framework (GLib ii libnm-util1 0.8-1network management framework (shar ii libnotify1 [libnotify1- 0.5.0-2 sends desktop notifications to a n ii libpango1.0-0 1.28.1-1 Layout and rendering of internatio ii libxml2 2.7.7.dfsg-4 GNOME XML library ii network-manager 0.8-1network management framework daemo ii policykit-1-gnome 0.96-2 GNOME authentication agent for Pol ii zlib1g 1:1.2.3.4.dfsg-3 compression library - runtime Versions of packages network-manager-gnome recommends: ii gnome-bluetooth 2.30.0-2 GNOME Bluetooth tools ii libpam-gnome-keyring [libpam- 2.30.1-2 PAM module to unlock the GNOME key ii mobile-broadband-provider-inf 20100702-1 database of mobile broadband servi ii notification-daemon 0.5.0-2daemon to displays passive pop-up Versions of packages network-manager-gnome suggests: pn network-manager-openvpn-gnome none (no description available) pn network-manager-pptp-gnomenone (no description available) pn network-manager-vpnc-gnomenone (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#553359: Upstream packaging
I think most licensing issues have been resolved upstream. We also maintain Ubuntu packages upstream: https://launchpad.net/~pmjdebruijn/+archive/ppa/+packages So I don't see why Debian would want to package Darktable separately. If there is anything wrong with my packages, please let me know, I'm sure we'll be able to work things out, so Debian can import my package 1:1. Regards, Pascal de Bruijn -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590156: sd: Provide sync-ing with debbugs
Package: sd Version: 0.74-1 Severity: wishlist Hi. It would be great to be able to sync with debbugs. Thanks in advance. Best regards, -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages sd depends on: ii libdatetime-format-natural-pe 0.88-1 Perl module for parsing human-read ii libdatetime-perl 2:0.5900-1 module for manipulating dates, tim ii libhtml-tree-perl 3.23-2 Perl module to represent and creat ii libprophet-perl 0.743-1distributed, peer-to-peer replicat ii libtime-progress-perl 1.5-1 perl module for elapsed and estima ii liburi-perl 1.54-1 module to manipulate and access UR ii perl 5.10.1-13 Larry Wall's Practical Extraction sd recommends no packages. Versions of packages sd suggests: pn libemail-address-perl none (no description available) pn libhiveminder-perlnone (no description available) pn libnet-github-perlnone (no description available) pn libnet-google-code-perl none (no description available) pn libnet-jifty-perl none (no description available) pn libnet-redmine-perl none (no description available) pn libnet-trac-perl none (no description available) pn librt-client-rest-perlnone (no description available) ii libwww-perl 5.836-1Perl HTTP/WWW client/server librar -- debconf-show failed -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590157: cdbs and module-assistant: conflicting use of DEB_DESTDIR variable
Package: cdbs,module-assistant Version: cdbs/0.4.87 Version: module-assistant/0.11.3 Severity: important Hello, Both packages use the DEB_DESTDIR variable, but with completely different semantics. It is close to impossible to use both cdbs and /us/share/modass/include/*.mk in a single debian/rules, see e.g. bug #577321. -- Jakub Wilk signature.asc Description: Digital signature
Bug#590158: isc-dhcp-server: please consider accepting init.d patch to allow for temporarily different configuration
Package: isc-dhcp-server
Version: 4.1.1-P1-8
Severity: wishlist
Hi,
this is #565650 adapted to isc-dhcp-server 4.1.1
the attached patch will extend the isc-dhcp-server init script to accept
a second command line command, selecting a totally different
configuration file with a suffix.
/etc/init.d/isc-dhcp-server start
has identical behavior (and the expected behavior),
/etc/init.d/isc-dhcp-server start somesuffix
will start the DHCP server on the interfaces listed in
INTERFACES_somesuffix in /etc/default/isc-dhcp-server with the config
file read from /etc/dhcp/dhcpd-somesuffix.conf
This allows to run the DHCP server with a completely different
configuration for debugging or testing purposes while leaving the
original configuration unaltered. This prevents issues from happening
where a testing DHCP server remains running and the notebook is then
plugged into a productive network, as it makes sure that the original
configuration stays intact and does not need to be manually put back.
Please consider accepting the patch.
Greetings
Marc
--- dhcp3-server.dpkg-dist 2009-07-15 08:28:07.0 +0200
+++ dhcp3-server2010-01-17 18:37:31.0 +0100
@@ -35,13 +35,24 @@
NAME=dhcpd3
DESC=DHCP server
DHCPDPID=/var/run/dhcpd.pid
+CONFIGFILE=/etc/dhcp3/dhcpd.conf
+IFCS=$INTERFACES
+
+if [ -n $2 ]; then
+ SUFFIX=$2
+ DESC=DHCP server suffix $SUFFIX
+ DHCPDPID=/var/run/dhcpd-$SUFFIX.pid
+ CONFIGFILE=/etc/dhcp3/dhcpd-$SUFFIX.conf
+ eval IFCS=\$INTERFACES_$SUFFIX
+fi
+
test_config()
{
- if ! /usr/sbin/dhcpd3 -t -q /dev/null 21; then
+ if ! /usr/sbin/dhcpd3 -cf $CONFIGFILE -t -q /dev/null 21; then
echo dhcpd self-test failed. Please fix the config file.
echo The error was:
- /usr/sbin/dhcpd3 -t
+ /usr/sbin/dhcpd3 -cf $CONFIGFILE -t
exit 1
fi
}
@@ -67,7 +78,7 @@
test_config
log_daemon_msg Starting $DESC $NAME
start-stop-daemon --start --quiet --pidfile $DHCPDPID \
- --exec /usr/sbin/dhcpd3 -- -q $INTERFACES
+ --exec /usr/sbin/dhcpd3 -- -pf $DHCPDPID -cf
$CONFIGFILE -q $IFCS
sleep 2
if check_status -q; then
Bug#590155: [Pkg-utopia-maintainers] Bug#590155: network-manager-gnome: nm-applet sometimes displays as a black rectangle in the notification area
On 24.07.2010 12:21, Aaron Barany wrote: Package: network-manager-gnome Version: 0.8-1 Severity: normal About 1/3 of the time when I log on, nm-applet shows up as a black rectangle in the notification area. Also, if I right click on the rectangle the contextual menu is the same as if I right click on a blank part of the notification area instead of the network manager's contextual menu. If I log out then log back on, the icon and contextual menu will generally be restored. I noticed this when I started using the Compiz Fusion icon, so it's likely linked to that. Is this problem reproducible if you disable compositing/compiz? Michael -- Why is it that all of the instruments seeking intelligent life in the universe are pointed away from Earth? signature.asc Description: OpenPGP digital signature
Bug#584392: cl-asdf incompatible with autobuilder? [was Re: Bug#584392: vcs-tree: FTBFS ...]
* Kevin Rosenberg ke...@rosenberg.net, 2010-06-03, 16:25: Lucas Nussbaum wrote: Source: vcs-tree During a rebuild of all packages in sid, your package failed to build on amd64. [...] The full build log is available from: http://people.debian.org/~lucas/logs/2010/06/02/vcs-tree_0.4.0a-1_lsid64.buildlog Hello cl-asdf / common-lisp-controller maintainers, vcs-tree is failing to build its Debian package from source. The relevant lines from the build output are below [1]. My best guess of the cause of this new problem is that the cl-asdf is trying to write binary files under /.cache/, but the autobuilder does not permit creation of that directory. As you are probably aware, ASDF only recently started to build files under a ~/.cache/ directory tree. If I understand correctly cl-asdf source code, you can customize cache directory by setting the XDG_CACHE_HOME environment variable. -- Jakub Wilk signature.asc Description: Digital signature
Bug#586086: src:mysql-5.1: FTBFS due to libtool problems
tags 586086 + moreinfo thanks (I am not maintainer of this package.) * Toni Mueller t...@debian.org, 2010-06-16, 11:55: Package: src:mysql-5.1 Version: 5.1.47-1~bpo50+1 Did you mean 5.1.47-1? (Otherwise this bug doesn't belong in Debian BTS.) I tried to reproduce this bug, and 5.1.47-1 builds fine for me in a clean lenny chroot. Anyway, even if it didn't, I don't think serious severity is justified here. -- Jakub Wilk signature.asc Description: Digital signature
Bug#590159: mysql-5.1: doesn't respect DEB_BUILD_OPTIONS=parallel=N
Source: mysql-5.1 Version: 5.1.47-1 Severity: important debian/rules parses /proc/cpuinfo instead of respecting whatever was specified in DEB_BUILD_OPTIONS. -- Jakub Wilk signature.asc Description: Digital signature
Bug#590160: [kdevelop] shortcut conflict configuration
Package: kdevelop Version: 4:4.0.0-2 Severity: normal --- Please enter the report below this line. --- I'd like to have e. g. F5 as Launch Debug shortcut. Going to the menu, selecting Launch Debug and F5, I'm told about a conflict with Reload. The text (at least the German translation) asks me if I want to remove the other shortcut meanings. I do. Back in the configuration menu, when I look at Reload, it doesn't have F5 configured anymore. Fine. Pressing OK. Pressing F5, the debugger is launched. But when pressing F5 the next time, I get a complaint about the key being assigned several times. Going back to the config menu, Reload is assigned to F5 again (as well as Launch Debug). I tried it several times with different functions and different keys, all the same result... --- System information. --- Architecture: amd64 Kernel: Linux 2.6.32-4-amd64 Debian Release: squeeze/sid 50 unstableftp.uni-kl.de 50 unstableftp.de.debian.org 150 testing security.eu.debian.org 150 testing ftp.uni-kl.de 150 testing ftp.de.debian.org 150 stable security.eu.debian.org 150 stable ftp.uni-kl.de --- Package information. --- Depends (Version) | Installed =-+-=== kdebase-runtime | 4:4.4.4-1+b1 kdevplatform1-libs (= 1.0.0) | 1.0.0-1 libc6 (= 2.2.5) | 2.11.2-2 libgcc1 (= 1:4.1.1) | 1:4.4.4-6 libkdecore5 (= 4:4.4.0) | 4:4.4.4-2 libkdeui5(= 4:4.3.4) | 4:4.4.4-2 libkio5 (= 4:4.3.4) | 4:4.4.4-2 libkparts4 (= 4:4.3.4) | 4:4.4.4-2 libktexteditor4 (= 4:4.3.4) | 4:4.4.4-2 libprocessui4a (= 4:4.3.4) | 4:4.4.4-1 libqt4-dbus (= 4:4.5.3) | 4:4.6.3-1 libqt4-help (= 4:4.5.3) | 4:4.6.3-1 libqt4-network (= 4:4.5.3) | 4:4.6.3-1 libqt4-script(= 4:4.5.3) | 4:4.6.3-1 libqt4-webkit(= 4:4.5.3) | 4:4.6.3-1 libqtcore4 (= 4:4.6.1) | 4:4.6.3-1 libqtgui4(= 4:4.5.3) | 4:4.6.3-1 libstdc++6 (= 4.4.0) | 4.4.4-6 libsublime1(= 1.0.0) | 1.0.0-1 libthreadweaver4 (= 4:4.3.4) | 4:4.4.4-2 kdevelop-data (= 4:4.0.0-2) | 4:4.0.0-2 lcov | 1.8-2 Recommends (Version) | Installed =-+-=== gdb (= 7.0) | 7.0.1-2+b1 valgrind | 1:3.5.0-3 Suggests (Version) | Installed -+-=== cmake| 2.8.2-2 kdevelop-l10n| signature.asc Description: This is a digitally signed message part.
Bug#589891: silo: No more boots on UltraSparc 10: Fast Data Access MMU Miss
severity 589891 important thanks I don't think that 'grave' is really appropriate here. The latest version of SILO has been out for quite some time, and this is a first report of that kind, which makes me think that this is not a common scenario. The only major change in SILO since the stable version is the switch from gcc-2.95 to the default gcc (4.3). The rest of the changes should be pretty benign, mostly related to the changes in libc headers which were breaking the ability to build SILO from source. Next week I'll try to prepare a few versions for you to test, the one built with the old compiler, and with various suspicious patches backed out. In the meantime, please test whether you can reproduce the problem with 1.4.14+git20100207-1 - this will narrow the field somewhat. On Thu, Jul 22, 2010 at 01:02:46AM +0200, Axel Beckert wrote: Package: silo Version: 1.4.14+git20100228-1 Severity: grave After quite some downtime (280 days or so) I updated my UltraSparc 10 running Sid. With that update came also a new silo (skipping one or two package versions inbetween). Since that upgrade silo doesn't start anymore. On boot I just get the error message Fast Data Access MMU Miss even before the silo version number is shown. The version which was installed before is 1.4.13a+git20070930-3 which is also the version currently in Debian Stable. After downgrading to it, the box boots fine again. Both times, I tried the silo installation (i.e. calling silo on the command line) while running under 2.6.24 from the Lenny-while-being-testing installer CD I used to setup this box three years ago or so, so it shouldn't be that bug again with 32 vs 64 bit image which happened under some kernels around 2.6.30 or so. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing'), (400, 'stable'), (110, 'experimental') Architecture: sparc (sparc64) Kernel: Linux 2.6.32-5-sparc64 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages silo depends on: ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib silo recommends no packages. silo suggests no packages. -- Configuration Files: /etc/silo.conf changed: root=/dev/mapper/vg0-root partition=1 default=Linux read-only timeout=100 append=video=atyfb:off image=/vmlinuz label=Linux initrd=/initrd.img image=/vmlinuz.old label=LinuxOLD initrd=/initrd.img.old image=/vmlinuz-2.6.30-1-sparc64 label=2.6.30-1 initrd=/initrd-2.6.30-1-sparc64.img image=/vmlinuz-2.6.32-5-sparc64 label=2.6.32-5 initrd=/initrd-2.6.32-5-sparc64.img -- no debconf information -- debsums errors found: debsums: changed file /boot/second.b (from silo package) -- Jurij Smakov ju...@wooyd.org Key: http://www.wooyd.org/pgpkey/ KeyID: C99E03CC -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590161: plone3-site: depency problem
Package: plone3-site Version: 3.1.3-1 Severity: normal plone3-site - depends on zope2.10 - zope2.10 2.10.6-1+lenny1 depends on zope-common - zope-common 0.5.50 conflicts with zope2.10 2.10.6-1+lenny1 - alternativ: zope-common 0.5.45: $/etc/init.d/zope2.10 restart .Zope2.10: starting plone-site instance hangs and plone is not startet -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (650, 'testing'), (600, 'stable'), (500, 'testing-proposed-updates'), (500, 'proposed-updates') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages plone3-site depends on: ii debconf [debconf-2.0] 1.5.33 Debian configuration management sy ii zope-common 0.5.50 common settings and scripts for Zo pn zope-plone3 none (no description available) pn zope2.10 none (no description available) plone3-site recommends no packages. plone3-site suggests no packages. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#589490: startupmanager crashes on amd64
tags 589490 + moreinfo thanks * mahashakti89 mahashakt...@orange.fr, 2010-07-18, 07:58: Generating grub.cfg ... Found background image: Lake_mapourika_NZ1.tga Found linux image: /boot/vmlinuz-2.6.34-1-amd64 Found initrd image: /boot/initrd.img-2.6.34-1-amd64 Found linux image: /boot/vmlinuz-2.6.34 Found initrd image: /boot/initrd.img-2.6.34 Found Microsoft Windows XP Professionnel on /dev/sdb1 Found Ubuntu 10.04 LTS (10.04) on /dev/sdc12 Found Debian GNU/Linux (squeeze/sid) on /dev/sdc6 Found Windows 7 (loader) on /dev/sdd1 done Grub2 detected Usplash detected Splashy not detected Traceback (most recent call last): File /usr/sbin/startupmanager, line 54, in module main() File /usr/sbin/startupmanager, line 51, in main SumGui() File /usr/share/startupmanager/gtk_frontend.py, line 193, in __init__ self.setup_widgets() File /usr/share/startupmanager/gtk_frontend.py, line 202, in setup_widgets self.set_shared_grub_widgets() File /usr/share/startupmanager/gtk_frontend.py, line 223, in set_shared_grub_widgets self.timeout_spinner.set_value(self.grub.get_timeout()) File /usr/lib/pymodules/python2.6/bootconfig/grub.py, line 91, in get_timeout timeout = utils.extract_number(line) File /usr/lib/pymodules/python2.6/bootconfig/utils.py, line 64, in extract_number match = number_filter.search(line) TypeError: expected string or buffer zsh: exit 1 sudo startupmanager Any clue ?? Could you please attach your /etc/default/grub ? -- Jakub Wilk signature.asc Description: Digital signature
Bug#587033: wget: Quotes get striped in cookie values
On Friday 23 July 2010 19:21:16 Michelle Konzack wrote: ..but it MUST not be quoted, otherwise it is a misinterpretation of the server reading the cookies. The first equal-sign (=) is the seperator. There is nothing in the specification which require QUOTES. I had a quick look at rfc 2109, and I couldn't find a place where it says it MUST not be quoted. Where did you get that information? It does say in section 4.1 that cookies value syntax is: token | quoted-string But in the example section 5.1, the quotes are not stripped! My problem is when the value is a quoted-string. Question: Which ERRORS do you have and which server and other software are you using on the server side? I encoutered that problem with my bank website. https://www.coopanet.com/banque/sso/co/connexion.do I have no idea what software they are using, and obvisouly I'll not post my login/password here. The error is that I cannot login. Maybe the way they analyze the cookie value, and their quotes, is not in the best practices, but I will not contact them about that, while other http clients work fine. I spent a full day pinpointing the error to the missing quotes. Believe me, this is what causes the problem. Sending a bugreport du to missing quotes is worthless, if you can not provide any error messages du to the missing quotes. Allow me to disagree with you. I tried curl and iceweasel, and both works ok with that website. And they do not remove the quotes when there are some. It would have save me some time if I had known about that earlier. If, as you suggest, there is nothing in the specification which require quotes, why not store it as the first character of the value? I guess that's what other http clients do. Peace -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590162: maint-guide: encourage work on already packaged programs
Package: maint-guide Version: 1.2.20 Severity: wishlist Hi, I believe this has been mentioned before on lists but I don't see it reflected in the newmaint guide: new contributors should be highly encouraged to adopt orphaned packages, instead of creating new ones. Of course there will always be new programs that are worth packaging, but new contributors should be aware that work on viable existing packages (as opposed to packages that should be removed) is much more likely to attract sponsoring. I'll happily provide a patch (eg. for section 2.1, choose your program), if you agree on the principle. I'm not quite sure though whether that would suffice given that the whole document is aimed at creating packages from scratch, but it would at least be a step in the right direction. Cheers, Serafeim -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590163: openprinting-ppds: where did HP_LaserJet_1320_Series.ppd go?
Package: openprinting-ppds Version: 20100630-1 Severity: normal Hi and thanks for maintaining this package! I used to configure my HP LaserJet 1320 printer with the following commands: # aptitude install openprinting-ppds # zcat /usr/share/ppd/postscript/HP/HP_LaserJet_1320_Series.ppd.gz \ /tmp/HP_LaserJet_1320_Series.ppd # lpadmin -p lj -E -v parallel:/dev/lp0 \ -P /tmp/HP_LaserJet_1320_Series.ppd -D HP LaserJet 1320 # lpoptions -p lj -o media=A4 -o sides=two-sided-long-edge # lpadmin -d lj Now, I've just upgraded openprinting-ppds and noticed that /usr/share/ppd/postscript/HP/HP_LaserJet_1320_Series.ppd.gz seems to have disappeared from the package! I couldn't find any clearly explained reason for that in the Debian changelog, and no README.Debian seems to be present. Why was this PPD file dropped? How am I supposed to configure my HP LaserJet 1320 printer, next time I install a (print server) box? I would rather avoid searching for random PPD files on the Internet, like I used to do long ago... Could you please help me? -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (800, 'testing'), (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash openprinting-ppds depends on no packages. Versions of packages openprinting-ppds recommends: ii cups 1.4.4-1Common UNIX Printing System(tm) - ii cups-client 1.4.4-1Common UNIX Printing System(tm) - Versions of packages openprinting-ppds suggests: pn hpijs-ppdsnone (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590157: [Build-common-hackers] Bug#590157: cdbs and module-assistant: conflicting use of DEB_DESTDIR variable
Hi Jakub, On Sat, Jul 24, 2010 at 12:27:02PM +0200, Jakub Wilk wrote: Package: cdbs,module-assistant Version: cdbs/0.4.87 Version: module-assistant/0.11.3 Severity: important Hello, Both packages use the DEB_DESTDIR variable, but with completely different semantics. It is close to impossible to use both cdbs and /us/share/modass/include/*.mk in a single debian/rules, see e.g. bug #577321. I fail to locate CDBS nor module-assistant even mentioned in that bugreport. That said, it certainly do not surprise me that CDBS is incompatible with other tools also using Make snippets and DEB_DESTDIR but differently. Suggestions of how to solve[1] this is of course appreciated, as is more info on what is the actual problem here. Kind regards, - Jonas [1] except for rewriting CDBS to change semantics of DEB_DESTDIR or renaming that variable, both of which is unrealistic to change, I believe. -- * Jonas Smedegaard - idealist Internet-arkitekt * Tlf.: +45 40843136 Website: http://dr.jones.dk/ [x] quote me freely [ ] ask before reusing [ ] keep private signature.asc Description: Digital signature
Bug#590164: [gtranslator] open-tran search fails
Package: gtranslator Version: 1.9.11-1 Severity: normal The open-tran plugin fails in search the phrase with message: FAULT: 1 type 'exceptions.Exception':method suggest2 is not supported and no result is given. --- System information. --- Architecture: amd64 Kernel: Linux 2.6.32-5-amd64 Debian Release: squeeze/sid 500 unstabledebs.slavino.sk 500 unstabledeb.opera.com 500 testing www.debian-multimedia.org 500 testing security.debian.org 500 testing ftp.sk.debian.org 500 stable x2go.obviously-nice.de 500 squeeze www.lamaresh.net --- Package information. --- Depends (Version) | Installed ===-+-== libatk1.0-0 (= 1.29.3) | 1.30.0-1 libc6 (= 2.3) | 2.11.2-2 libcairo2(= 1.2.4) | 1.8.10-4 libfontconfig1 (= 2.8.0) | 2.8.0-2.1 libfreetype6 (= 2.2.1) | 2.4.0-2 libgconf2-4 (= 2.27.0) | 2.28.1-3 libgda-4.0-4| 4.0.7-1 libgdict-1.0-6 (= 2.23.90) | 2.30.0-2 libgdl-1-3 (= 2.30.0) | 2.30.0-1 libgettextpo0 | libglib2.0-0(= 2.24.0) | 2.24.1-1 libgtk2.0-0 (= 2.18.0) | 2.20.1-1 libgtksourceview2.0-0 (= 2.10.0) | 2.10.3-1 libgtkspell0(= 2.0.10) | 2.0.16-1 libgucharmap7 (= 1:2.24.0) | 1:2.30.2-1 libpango1.0-0 (= 1.14.0) | 1.28.1-1 libsoup2.4-1 (= 2.4.0) | 2.30.2-1 libunique-1.0-0 (= 1.0.0) | 1.1.6-1 libxml2 (= 2.7.4) | 2.7.7.dfsg-4 gconf2(= 2.28.1-2) | 2.28.1-3 Package's Recommends field is empty. Package's Suggests field is empty. regards -- s pozdravom Slavko http://slavino.sk signature.asc Description: PGP signature
Bug#570988: xserver-xorg-video-intel: blackout
I installed the xserver-xorg-video-intel 2.12 from experimental (and some dependencies too) on my debian squeeze and so far so good. No X crashes so far. But, of course, better knock on wood... On 04.07.2010 13:13, Julien Cristau wrote: On Sun, Jul 4, 2010 at 11:53:47 +0300, Juha Mäkinen wrote: With the upgraded packages today ( 4 july 2010 ) and letting X do the default settings things work most of the time. Except that once in a while (hours to days) I get blackout and X shuts off. Xorg.0.log tells me that failed to submit batchbuffer: Input/Output error Whatever that may mean... here also from /var/log/kern.log Jul 4 11:00:19 galadriel kernel: [ 6600.428021] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung Jul 4 11:00:19 galadriel kernel: [ 6600.428043] render error detected, EIR: 0x Jul 4 11:00:19 galadriel kernel: [ 6600.429899] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 22073 at 22068) and /proc/version Linux version 2.6.32-5-686 (Debian 2.6.32-15) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:59:47 UTC 2010 is this reproducible with xserver-xorg-video-intel 2.12 from experimental? Cheers, Julien -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590165: tdfsb: tdfsb doesn't let the pointer go when alt+tab is pressed or change of workspaces in gnome
Package: tdfsb Version: 0.0.10-1 Severity: normal tdfsb uses the mouse for rotate the view on screen, and when I'm inside the program, there is no mouse pointer. but when I change the focus to other window (using alt+tab or changing workspaces) the mouse pointer freezes. When I go back to tdfsb the mouse vanishes again and tdfsb contine normaly. -- System Information: Debian Release: squeeze/sid APT prefers stable APT policy: (900, 'stable'), (50, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core) Locale: LANG=pt_BR.UTF-8, LC_CTYPE=pt_BR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages tdfsb depends on: ii freeglut3 2.4.0-6.1 OpenGL Utility Toolkit ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib ii libgl1-mesa-glx [l 7.0.3-7 A free implementation of the OpenG ii libglu1-mesa [libg 7.0.3-7 The OpenGL utility library (GLU) ii libsdl-image1.21.2.10-2+b1 image loading library for Simple D ii libsdl1.2debian1.2.13-2 Simple DirectMedia Layer ii libsmpeg0 0.4.5+cvs20030824-2.2 SDL MPEG Player Library - shared l ii libx11-6 2:1.2.1-1 X11 client-side library ii libxext6 2:1.0.4-2 X11 miscellaneous extension librar ii libxi6 2:1.1.4-1 X11 Input extension library ii libxmu62:1.0.4-1 X11 miscellaneous utility library tdfsb recommends no packages. tdfsb suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590166: thunar-data: missing sendto action for blueman-sendto
Package: thunar-data Version: 1.0.2-1 thunar-data has a sento action for bluetooth-sendto, which isn't provided by blueman. However, there is an equivalent which is provided: blueman-sendto. Essentially, this needs no more than a copy of bluetooth-sendto.desktop with s/bluetooth/blueman/g (or a symlink from bluetooth-sendto to blueman-sendto, which would be best done in blueman but would require the addition of Conflicts headers). -- | Darren Salt| linux at youmustbejoking | nr. Ashington, | Toon | using Debian GNU/Linux | or ds,demon,co,uk| Northumberland | back! | + Generate power using sun, wind, water, nuclear. FORGET COAL AND OIL. At any event, the people whose seats are furthest from the aisle arrive last. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590167: supertux: when the program open in fullscreen in a widescreen display the botton of the game canvas doesn't show
Package: supertux Version: 0.1.3-1.2 Severity: important -- System Information: Debian Release: squeeze/sid APT prefers stable APT policy: (900, 'stable'), (50, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core) Locale: LANG=pt_BR.UTF-8, LC_CTYPE=pt_BR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages supertux depends on: ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib ii libgcc11:4.4.0-5 GCC support library ii libgl1-mesa-glx [libgl 7.0.3-7 A free implementation of the OpenG ii libsdl-image1.21.2.10-2+b1 image loading library for Simple D ii libsdl-mixer1.21.2.8-4 mixer library for Simple DirectMed ii libsdl1.2debian1.2.13-2 Simple DirectMedia Layer ii libstdc++6 4.4.0-5 The GNU Standard C++ Library v3 ii supertux-data 0.1.3-1.2 Levels for classic 2D jump 'n run ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime supertux recommends no packages. supertux suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590168: please add support to check for svm/npt
Package: cpuid
Version: 3.3-9
Severity: wishlist
Tags: patch
Hi,
thanks for maintaining cpuid. As I've been curious to find out wether my
processor supports nested page tables, I found that cpuid didn't check for
that bit yet. I've added that and did a few corrections/extensions to the
current AMD CPUID Specification (Revision 2.28) in the attached patch.
To verify the results I've also tested this on two AMD systems, output is
also attached.
Cheers and thanks in advance,
Stefan.
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages cpuid depends on:
ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib
cpuid recommends no packages.
cpuid suggests no packages.
-- no debconf information
--- cpuid.c.orig 2002-01-02 07:14:51.0 +0100
+++ cpuid.c 2010-07-24 13:23:05.341662973 +0200
@@ -21,7 +21,7 @@
void printregs(int eax,int ebx,int ecx,int edx);
#define MAXBRANDS 9
-char *Brands[MAXBRANDS] = {
+static const char *Brands[MAXBRANDS] = {
brand 0,
Celeron processor,
Pentium III processor,
@@ -89,7 +89,7 @@
exit(0);
}
-char *Intel_feature_flags[] = {
+static const char *Intel_feature_flags[] = {
FPUFloating Point Unit,
VMEVirtual 8086 Mode Enhancements,
DE Debugging Extensions,
@@ -491,42 +491,117 @@
break;
}
}
-char *AMD_feature_flags[] = {
- Floating Point Unit,
- Virtual Mode Extensions,
- Debugging Extensions,
- Page Size Extensions,
- Time Stamp Counter (with RDTSC and CR4 disable bit),
- Model Specific Registers with RDMSR WRMSR,
- PAE - Page Address Extensions,
- Machine Check Exception,
- COMPXCHG8B Instruction,
- APIC,
- 10 - Reserved,
- SYSCALL/SYSRET or SYSENTER/SYSEXIT instructions,
- MTRR - Memory Type Range Registers,
- Global paging extension,
- Machine Check Architecture,
- Conditional Move Instruction,
- PAT - Page Attribute Table,
- PSE-36 - Page Size Extensions,
- 18 - reserved,
- 19 - reserved,
- 20 - reserved,
- 21 - reserved,
- AMD MMX Instruction Extensions,
- MMX instructions,
- FXSAVE/FXRSTOR,
- 25 - reserved,
- 26 - reserved,
- 27 - reserved,
- 28 - reserved,
- 29 - reserved,
- 3DNow! Instruction Extensions,
- 3DNow instructions,
+
+/* flags for function 0001, edx */
+static const char *AMD_feature_flags[] = {
+ Floating Point Unit, /* 0 */
+ Virtual Mode Extensions, /* 1 */
+ Debugging Extensions, /* 2 */
+ Page Size Extensions, /* 3 */
+ Time Stamp Counter (with RDTSC and CR4 disable bit), /* 4 */
+ Model Specific Registers with RDMSR WRMSR, /* 5 */
+ PAE - Page Address Extensions,/* 6 */
+ Machine Check Exception, /* 7 */
+ COMPXCHG8B Instruction, /* 8 */
+ APIC, /* 0 */
+ 10 - Reserved, /* 10 */
+ SYSCALL/SYSRET or SYSENTER/SYSEXIT instructions, /* 11 */
+ MTRR - Memory Type Range Registers,/* 12 */
+ Global paging extension, /* 13 */
+ Machine Check Architecture, /* 14 */
+ Conditional Move Instruction,/* 15 */
+ PAT - Page Attribute Table, /* 16 */
+ PSE-36 - Page Size Extensions,/* 17 */
+ 18 - reserved, /* 18 */
+ CLFLUSH instruction, /* 19 */
+ 20 - reserved, /* 20 */
+ 21 - reserved, /* 21 */
+ 22 - reserved, /* 22 */
+ MMX instructions, /* 23 */
+ FXSAVE/FXRSTOR, /* 24 */
+ SSE Extensions, /* 25 */
+ SSE2 Extensions, /* 26 */
+ 27 - reserved, /* 27 */
+ HTT: hyperthreading technology,/* 28 */
+ 29 - reserved, /* 29 */
+ 30 - reserved, /* 30 */
+ 31 - reserved, /* 31 */
+};
+
+/* flags for function 8000 0001, edx */
+static const char *AMD_feature_flags_8001_edx[] = {
+ Floating Point Unit, /* 0 */
+ Virtual Mode Extensions, /* 1 */
+ Debugging Extensions, /* 2 */
+ Page Size Extensions, /* 3 */
+ Time Stamp Counter (with RDTSC and CR4 disable bit), /* 4 */
+ Model Specific Registers with RDMSR WRMSR, /* 5 */
+ PAE - Page Address Extensions,/* 6 */
+ Machine Check Exception, /* 7 */
+ COMPXCHG8B Instruction, /* 8 */
+ APIC, /* 0 */
+ 10 - Reserved, /* 10 */
+ SYSCALL/SYSRET or SYSENTER/SYSEXIT instructions, /* 11 */
+ MTRR - Memory Type Range Registers,/* 12 */
+ Global paging extension, /* 13 */
+ Machine Check Architecture, /* 14 */
+ Conditional Move Instruction,/* 15 */
+ PAT - Page Attribute Table, /* 16 */
+ PSE-36 - Page Size Extensions,/* 17 */
+ 18 - reserved, /* 18 */
+ 19 - reserved, /* 19 */
+ NX - No execute page protection,/* 20 */
+ 21 - reserved, /* 21 */
+ MMXext - AMD extensions to MMX instructions, /* 22 */
+ MMX instructions, /* 23 */
+ FXSAVE/FXRSTOR, /* 24 */
+
Bug#410695: [apt] Same trouble here, it's not a network problem
Package: apt Version: 0.7.25.3 --- Please enter the report below this line. --- Hello! It seems I stumbled across the same problem... I cannot install/update files larger than about 100 MB anymore. I experienced this with libqt4-dbg some weeks ago and later on with texlive-latex-extra-doc as well. Here is what happens... apt-get install libqt4-dbg Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut Status-Informationen einlesen... Fertig Die folgenden NEUEN Pakete werden installiert: libqt4-dbg 0 aktualisiert, 1 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 160MB an Archiven heruntergeladen werden. Nach dieser Operation werden 445MB Plattenplatz zusätzlich benutzt. Hole:1 ftp://ftp.de.debian.org testing/main libqt4-dbg 4:4.6.3-1 [160MB] Fehl ftp://ftp.de.debian.org testing/main libqt4-dbg 4:4.6.3-1 Zeitüberschreitung der Verbindung Fehlschlag beim Holen von ftp://ftp.de.debian.org/debian/pool/main/q/qt4- x11/libqt4-dbg_4.6.3-1_amd64.deb Hash-Summe stimmt nicht überein E: Einige Archive konnten nicht heruntergeladen werden; vielleicht »apt-get update« ausführen oder mit »--fix-missing« probieren? Zeitüberschreitung der Verbindung means timeout of connection, later it complains about a hash sum problem. Both is not true AFAICT. I had a look at the downloaded files at /var/cache/apt/archives/partial/ : root:/var/lib/apt/lists# md5sum /var/cache/apt/archives/partial/* a5f7550740d200241d97fc8fe0d498e9 /var/cache/apt/archives/partial/libqt4- dbg_4%3a4.6.3-1_amd64.deb.FAILED c3b5fd59eddf8fd144a6ab3bc85d0c6b /var/cache/apt/archives/partial/texlive- latex-extra-doc_2009-9_all.deb.FAILED root:~# sha1sum /var/cache/apt/archives/partial/* e79902f61521379a2c4e954813590cc1cd03e18e /var/cache/apt/archives/partial/libqt4-dbg_4%3a4.6.3-1_amd64.deb.FAILED 1824647f52aa39721484ddb83c3f1438e50cc59f /var/cache/apt/archives/partial/texlive-latex-extra-doc_2009-9_all.deb.FAILED root:~# sha256sum /var/cache/apt/archives/partial/* 5454c2a61a77fb950e81ef6e3330863c5a031f2e311e80f8193b3050f58eeefb /var/cache/apt/archives/partial/libqt4-dbg_4%3a4.6.3-1_amd64.deb.FAILED 7da918809e367e9dd0d597fcfc47339927e049012db6fdf618d4cc686c48ab5a /var/cache/apt/archives/partial/texlive-latex-extra-doc_2009-9_all.deb.FAILED These match the values in /var/lib/apt/lists/ftp.de.debian.org_debian_dists_unstable_main_binary- amd64_Packages : Package: libqt4-dbg [...] Size: 160116232 MD5sum: a5f7550740d200241d97fc8fe0d498e9 SHA1: e79902f61521379a2c4e954813590cc1cd03e18e SHA256: 5454c2a61a77fb950e81ef6e3330863c5a031f2e311e80f8193b3050f58eeefb Package: texlive-latex-extra-doc [...] Size: 192776872 MD5sum: c3b5fd59eddf8fd144a6ab3bc85d0c6b SHA1: 1824647f52aa39721484ddb83c3f1438e50cc59f SHA256: 7da918809e367e9dd0d597fcfc47339927e049012db6fdf618d4cc686c48ab5a So it seems to me the packages have been downloaded correctly, and apt is doing something wrong. Ciao, Eike --- System information. --- Architecture: amd64 Kernel: Linux 2.6.32-4-amd64 Debian Release: squeeze/sid 50 unstableftp.uni-kl.de 50 unstableftp.de.debian.org 150 testing security.eu.debian.org 150 testing ftp.uni-kl.de 150 testing ftp.de.debian.org 150 stable security.eu.debian.org 150 stable ftp.uni-kl.de --- Package information. --- Depends (Version) | Installed ===-+-= libc6(= 2.3.4) | 2.11.2-2 libgcc1(= 1:4.1.1) | 1:4.4.4-6 libstdc++6 (= 4.4.0) | 4.4.4-6 debian-archive-keyring | 2009.01.31 Package's Recommends field is empty. Suggests(Version) | Installed =-+-=== aptitude | 0.6.3-3 OR synaptic | 0.63.1 OR wajig | 2.0.47 dpkg-dev | 1.15.7.2 apt-doc | bzip2 | 1.0.5-4 lzma | 4.43-14 python-apt| 0.7.96.1 --- Output from package bug script --- signature.asc Description: This is a digitally signed message part.
Bug#590168: please add support to check for svm/npt
Hi, sorry, output from the phenon processor was using the old version. Attached is the output after patching cpuid. Cheers, Stefan. eax ineax ebx ecx edx 0005 68747541 444d4163 69746e65 0001 00100f42 01040800 00802009 178bfbff 0002 0003 0004 0005 0040 0040 0003 8000 801b 68747541 444d4163 69746e65 8001 00100f42 10001857 37ff efd3fbff 8002 20444d41 6e656850 74286d6f 4920296d 8003 34582049 35303920 72502065 7365636f 8004 00726f73 8005 ff30ff10 ff30ff20 40020140 40020140 8006 2080 42004200 02008140 0030b140 8007 01f9 8008 3030 2003 8009 800a 0001 0040 000f 800b 800c 800d 800e 800f 8010 8011 8012 8013 8014 8015 8016 8017 8018 8019 f030 6010 801a 0003 801b 001f Vendor ID: AuthenticAMD; CPUID level 5 AMD-specific functions Version 00100f42: Family: 15 Model: 4 [] Standard feature flags 178bfbff: Floating Point Unit Virtual Mode Extensions Debugging Extensions Page Size Extensions Time Stamp Counter (with RDTSC and CR4 disable bit) Model Specific Registers with RDMSR WRMSR PAE - Page Address Extensions Machine Check Exception COMPXCHG8B Instruction APIC SYSCALL/SYSRET or SYSENTER/SYSEXIT instructions MTRR - Memory Type Range Registers Global paging extension Machine Check Architecture Conditional Move Instruction PAT - Page Attribute Table PSE-36 - Page Size Extensions CLFLUSH instruction MMX instructions FXSAVE/FXRSTOR SSE Extensions SSE2 Extensions HTT: hyperthreading technology Generation: 15 Model: 4 Extended feature flags efd3fbff: Floating Point Unit Virtual Mode Extensions Debugging Extensions Page Size Extensions Time Stamp Counter (with RDTSC and CR4 disable bit) Model Specific Registers with RDMSR WRMSR PAE - Page Address Extensions Machine Check Exception COMPXCHG8B Instruction APIC SYSCALL/SYSRET or SYSENTER/SYSEXIT instructions MTRR - Memory Type Range Registers Global paging extension Machine Check Architecture Conditional Move Instruction PAT - Page Attribute Table PSE-36 - Page Size Extensions NX - No execute page protection MMXext - AMD extensions to MMX instructions MMX instructions FXSAVE/FXRSTOR FFXSR: FXSAVE/FXRSTOR instruction optimizations 1 GB large page support RDTSCP LM: Long mode 3DNow! Instruction Extensions 3DNOW! instructions LahfSahf - LAHF and SAHF instructions in 64 bit mode CmpLegacy - core multiprocessing legacy mode SVM - secure virtual machine ExtApic - extended APIC space AltMovCR8 - LOCK MOV CR0 means MOV CR8 ABM - advanced bit manipulation: LZCNT instruction SSE4A - EXTRQ INSERTQ MOVNTSS MOVNTSD MisAlignSse - misaligned sse mode 3DNowPrefetch - PREFETCH PREFETCHW OSVW - OS visible workaround IBS - Instruction based sampling SKINIT - SKINIT STGI WDT - Watchdog timer support Processor name string: AMD Phenom(tm) II X4 905e Processor L1 Cache Information: 2/4-MB Pages: Data TLB: associativity 255-way #entries 48 Instruction TLB: associativity 255-way #entries 16 4-KB Pages: Data TLB: associativity 255-way #entries 48 Instruction TLB: associativity 255-way #entries 32 L1 Data cache: size 64 KB associativity 2-way lines per tag 1 line size 64 L1 Instruction cache: size 64 KB associativity 2-way lines per tag 1 line size 64 L2 Cache Information: 2/4-MB Pages: Data TLB: associativity L2 off #entries 128 Instruction TLB: associativity L2 off #entries 0 4-KB Pages: Data TLB: associativity 2-way #entries 0 Instruction TLB: associativity 2-way #entries 0 size 2 KB associativity L2 off lines per tag 129 line size 64 Advanced Power Management Feature Flags Has temperature sensing diode Maximum linear address: 48; maximum phys address 48 SVM revision: 1 NASID: Number of Address space identifiers 64 NP: Nested paging LbrVirt: LBR Virtualisation SVM Lock NRIPS: NRIP Save
Bug#550584: flash-kernel not run when going to new upstream kernel version
* Martin Michlmayr t...@cyrius.com [2010-07-05 16:51]: 12:28 tbm bwh: I haven't followed this boot loader policy you're working on, but it sounds like this offers a solution for #550584 right? 12:28 tbm so I'd have flash-kernel provide some hook script in /etc 12:46 bwh tbm: yes See http://kernel-handbook.alioth.debian.org/ch-update-hooks.html -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#588045: Guided partitioning: changing partition sizes afterwards not possible
Changing the partition sizes afterwards was possible for example in the sarge and etch installer. In the lenny installer and in recent squeeze installer it is no longer possible. Holger -- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = Created with Sylpheed 2.5.0 under DEBIAN GNU/LINUX 5.0.0 - L e n n y Registered LinuxUser #311290 - http://counter.li.org/ = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590169: debian-installer: partition requirements to boot from devices larger than 2TiB
Package: debian-installer Severity: important Recording this to the Debian BTS and sending to relevant parties, to make sure it is not forgotten. - Forwarded message from Tejun Heo t...@kernel.org - Date: Sat, 24 Jul 2010 11:58:42 +0200 From: Tejun Heo To: Jeff Garzik , Ben Collins, Linux-IDE, LKML Subject: support for drives larger than 2TiB Hello, I've been playing with a SATA 2.5T drive and things don't look too bad. All four controllers I've tested worked fine and the driver and kernel worked just fine. Even BIOSes don't seem too bad. At least the two boards I tested (both about three years old) didn't have much problem recognizing upto 2TiB and could access and boot fine although I'm fairly sure there will be BIOSes which would behave erratically. I also tested installing w/ openSUSE 11.3 and it worked fine. It automatically chose GPT and alignment and everything just worked (tm). I think the situation shouldn't be too different for any distro which uses up-to-date parted. The only problem is that everything which is necessary for booting needs to be located below 2TiB limit. Please note that this is much stricter restriction than the 128GiB limit we had due to LBA28. That limit was caused by BIOSes using LBA28 and vendors could and did update and be done with it in many cases. However, 2TiB limit is inherent in the BIOS programming interface and currently the only way to overcome it is using a completely different BIOS interface (EFI, that is). Vendors are not likely to introduce EFI for already released products although they're much more likely to release updates so that BIOSes can access upto 2TiB if they don't work already. We'll be stuck with 2TiB limit on much more configurations for longer period of time. So, distro installers need to try to locate everything needed for bootstrapping below 2TiB limit (ie. a dedicated boot partition below the limit). Drives 2TiB aren't on the market yet but aren't too far away. Let's make sure things will be ready by the next distro release cycle. Thanks. -- tejun - End forwarded message - -- One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie. -- The Silicon Valley Tarot Henrique Holschuh -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/debian-bugs-dist
Bug#590141: rng-tools: init-script should wait for sysfsutils
On Sat, 24 Jul 2010, Mario 'BitKoenig' Holbe wrote: the rng-tools init-script should depend on the start of the sysfsutils init-script: Under some circumstances users have to configure which of the available Hardware RNGs has to be used as current RNG for /dev/hwrng before rngd can start successfully (see below for a full example). This can be done by setting /sys/devices/virtual/misc/hw_random/rng_current, and this, in turn, is done by sysfsutils. No. sysfsutils starts too late for my tastes. The right way to deal with this would actually to hook to udev and select the preferred rng as soon as it becomes available. OTOH, I have nothing against adding support for this feature to rng-tools itself, which looks like a simple way to solve both problems. Here is the full example if you care :) I have an IdeaPad S12 VIA Nano where two Hardware RNGs are provided: one by VIA PadLock through via-rng, and one by the Broadcom Wireless card through b43. The Broadcom RNG is only delivering data if the wireless interface is up and otherwise responds ENODEV on read(). This is just a kernel interface shortcoming. We really should have a way for the RNG core to select the highest preference HWRNG (which would be the VIA Padlock one, as it is *FAST*, can generate very high quality random numbers if you configure it appropriately, and has been independently studied and validated in a public place). -- One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie. -- The Silicon Valley Tarot Henrique Holschuh -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590170: installation-reports: Problems with grub installation, tasks selection, network association, EULA acceptance
Package: installation-reports Severity: normal Tags: d-i Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O ] Detect network card:[O ] Configure network: [E ] Detect CD: [ ] Load installer modules: [O ] Detect hard drives: [O ] Partition hard drives: [E ] Install base system:[O ] Clock/timezone setup: [O ] User/password setup:[O ] Install tasks: [E ] Install boot loader:[E ] Overall install:[O ] Comments/Problems: 1. Creating the USB Media revealed quite difficult (zcat boot.img.gz failed to create a bootable usb key, multiple tries were required before getting a bootable media, difficult to understand where and how to use boot parameters such as tasks, etc..) 2. No buttons are displayed when prompted to accept or not the EULA for ipw2200 firmware! Or, to say it better, almost invisible buttons (maybe width=0 or no text in?) are displayed, impossible to do whatever but push any of them and hope it's the right one. When prompted for installation, I could probably accept it, but when installing the system pushing the same button resulted in a refusal (alert displayed). (Gtk interface was used) 3. Network association to home router was impossible, either with or without WEP password. I totally forgot about the mistake in the window scaling as explained in the errata, so I don't actually know if that's the case or not. Further information can be provided if needed. 4. I went for Guided - LVM partitions, then had a re-thought but it was impossible to revert back and delete any of the partition - or even change their size to better fit my needs (with 160GB of HD fully for Debian, i expected the wizard to save more than just 7GB for / !). Am I blind, or is it normal? 5. Installation was started with tasks=kde-desktop, standard as suggested in Debian Wiki. No tasksel was then displayed, but the worst is that all the gnome-desktop was installed too! 6. Grub was installed on the MBR of the USB key instead of the internal HD where Debian was installed. Had to fix it afterwards. I have to admit I didn't pay attention if it was possible to choose the media where to install grub - but it seems it was just possible to choose whether to install it or not, at all. Result was an unbootable system - I discovered where grub was when I plugged the USB to start over the installation. -- Package-specific info: Boot method: USB key Image version: firmware-netinst-1386-testing.iso daily build from July the 22nd, 2010 Date: Date and time of the install Machine: HP compaq nc4010 Partitions: df -Tl will do; the raw partition table is preferred Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [ ] Detect network card:[ ] Configure network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Install base system:[ ] Clock/timezone setup: [ ] User/password setup:[ ] Install tasks: [ ] Install boot loader:[ ] Overall install:[ ] Comments/Problems: Description of the install, in prose, and any thoughts, comments and ideas you had during the initial install. -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to sub...@bugs.debian.org. == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION=Debian GNU/Linux installer DISTRIB_RELEASE=6.0 (squeeze) - installer build 20100722-16:02 X_INSTALLATION_MEDIUM=hd-media == Installer hardware-summary: == uname -a: Linux blackbeauty 2.6.32-5-486 #1 Tue Jun 1 04:27:25 UTC 2010 i686 GNU/Linux lspci -knn: 00:00.0 Host bridge [0600]: ATI Technologies Inc RS200/RS200M AGP Bridge [IGP 340M] [1002:cbb2] (rev 02) lspci -knn: Kernel driver in use: agpgart-ati lspci -knn: 00:01.0 PCI bridge [0604]: ATI Technologies Inc PCI Bridge [IGP 340M] [1002:7010] lspci -knn: 00:06.0 Multimedia audio controller [0401]: ALi Corporation M5451 PCI AC-Link Controller Audio Device [10b9:5451] (rev 02) lspci -knn: Subsystem: Compaq Computer Corporation Device [0e11:005a] lspci -knn: 00:07.0 ISA bridge [0601]: ALi Corporation M1533/M1535/M1543 PCI to ISA Bridge [Aladdin IV/V/V+] [10b9:1533] lspci -knn: Subsystem: Compaq Computer Corporation Device [0e11:005a] lspci -knn: 00:08.0 Modem [0703]: ALi Corporation M5457 AC'97 Modem Controller [10b9:5457] lspci -knn: Subsystem: Compaq Computer Corporation Device [0e11:005a] lspci -knn: 00:09.0 Network controller [0280]: Intel Corporation PRO/Wireless
Bug#590157: [Build-common-hackers] Bug#590157: cdbs and module-assistant: conflicting use of DEB_DESTDIR variable
#include hallo.h * Jonas Smedegaard [Sat, Jul 24 2010, 01:13:14PM]: Suggestions of how to solve[1] this is of course appreciated, as is more info on what is the actual problem here. For some reason I assumed that this issue is known to cdbs users for years. If this is not the case, please mention it in the docs at a prominent place. There is a workaround: include m-a makefile snippets first, then include CDBS, and then use the alternative variable documented in /usr/share/doc/module-assistant/HOWTO-DEVEL.gz to specify m-a output. Regards, Eduard. -- Sein Jahrhundert kann man nicht verändern, aber man kann sich dagegenstellen und glückliche Wirkungen vorbereiten. -- Johann Wolfgang von Goethe (Lehrjahre) signature.asc Description: Digital signature
Bug#589891: silo: No more boots on UltraSparc 10: Fast Data Access MMU Miss
Hi, Jurij Smakov wrote: severity 589891 important thanks I don't think that 'grave' is really appropriate here. The latest version of SILO has been out for quite some time, and this is a first report of that kind, which makes me think that this is not a common scenario. No problem. The only major change in SILO since the stable version is the switch from gcc-2.95 to the default gcc (4.3). The rest of the changes should be pretty benign, mostly related to the changes in libc headers which were breaking the ability to build SILO from source. Ok. Next week I'll try to prepare a few versions for you to test, the one built with the old compiler, and with various suspicious patches backed out. Ok. Wouldn't have the possibility to test them before Monday evening anyway. In the meantime, please test whether you can reproduce the problem with 1.4.14+git20100207-1 - this will narrow the field somewhat. Will do as soon as I'm back home where the box resides. debsums: changed file /boot/second.b (from silo package) Hmmm, I didn't notice this before. Could that be related? Will at least once reinstall the current version of silo before trying to use any older version. This looks suspiciously like some PEBKAC by me. (I once forgot to mount /boot in the chroot while testing grub2 on Sparc. I thought, I copied everything back to the real partition, but this looks as if I didn't catch all of it.) Regards, Axel -- ,''`. | Axel Beckert a...@debian.org, http://people.debian.org/~abe/ : :' : | Debian Developer, ftp.ch.debian.org Admin `. `' | 1024D: F067 EA27 26B9 C3FC 1486 202E C09E 1D89 9593 0EDE `-| 4096R: 2517 B724 C5F6 CA99 5329 6E61 2FF9 CD59 6126 16B5 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590171: Wrong $installdir path in defaults.pm
Package: dnssec-tools Version: 1.7-1 Severity: serious Hi, The $installdir path in the defaults.pm file is wrong. my $installdir = getprefixdir() . /bin; # DNSSEC-Tools installation directory. It should be, I guess, /sbin. This breaks tools like rollerd preventing it to find needed commands. Cheers Laurent Bigonville -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#589796: [gscan2pdf-help] Can't save PDF with gscan2pdf
Apologies for crossposting the gscan2pdf-help list, Debian, and Ubuntu
bugs, but it makes no sense to have the same conversation three times.
I've installed the main dependencies from sid and still can't reproduce this.
Does it make a difference if the image is imported or scanned?
Please apply the attached patch, which simply adds a couple of
debugging messages so that I can home in on where this coming from,
start gscan2pdf with the --debug option, try to save a PDF, quit, and
post the output from the command line.
Regards
Jeff
diff --git a/bin/gscan2pdf b/bin/gscan2pdf
index 0b03600..881caed 100755
--- a/bin/gscan2pdf
+++ b/bin/gscan2pdf
@@ -3155,7 +3155,9 @@ sub save_PDF {
$SETTING{'cwd'} = dirname($filename);
# Create the PDF
+print Started saving $filename...\n if $debug;
create_PDF($filename);
+print Finished saving $filename\n if $debug;
$windowi-hide if defined $windowi;
}
Bug#590136: [INTL:cs] Czech debconf template updated translation for tftp-hpa
tag 590136 pending thanks applied in git. -- Address:Daniel Baumann, Burgunderstrasse 3, CH-4562 Biberist Email: daniel.baum...@panthera-systems.net Internet: http://people.panthera-systems.net/~daniel-baumann/ -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#577321: [Build-common-hackers] Bug#590157: cdbs and module-assistant: conflicting use of DEB_DESTDIR variable
* Jonas Smedegaard jo...@jones.dk, 2010-07-24, 13:13: Both packages use the DEB_DESTDIR variable, but with completely different semantics. It is close to impossible to use both cdbs and /us/share/modass/include/*.mk in a single debian/rules, see e.g. bug #577321. I fail to locate CDBS nor module-assistant even mentioned in that bugreport. True, let me fix that. Basically, modass/include/generic.mk does something like: KSRC = /usr/src/linux DEB_DESTDIR=$(KSRC)/.. which stomps on cdbs's DEB_DESTDIR. As a consequence, cdbs executes: /usr/bin/make -C build-tree/linux-gpib-3.2.11 install DESTDIR=/usr/src/linux/.. which obviously won't succeed. Suggestions of how to solve[1] this is of course appreciated, Please don't count on me here, I don't know either of the packages in question. -- Jakub Wilk signature.asc Description: Digital signature
Bug#590053: global.cgi fails to work with id-utils extension.
Hi Taisuke, On Fri, Jul 23, 2010 at 07:03:04PM +0900, Taisuke Yamada wrote: Package: global Version: 5.7.1-1 Severity: normal Web-based source browsing fails when global.cgi is called with idutils extension enabled: # example when searching for main with id-utils extension http://.../path/to/global.cgi?type=idutilspattern=main This is because global.cgi expects newer global version that supports mixing of -I and --result=ctags-xid option. I tested latest 5.9.1 myself, and verified global.cgi then works correctly. Shigio and I are currently discussing changes to the CGI mechanism which may alter several things about how this is currently arranged. I'm planning to push a new package out once we get that resolved and know for sure which direction we'll push things in from here. # But, you need to rebuild index files as file format has changed. Since current debian package is based on 5.7.1, it seems it's time to upgrade. Yes, it is. As upgrade request to 5.8.1 is still left open, The big difference between that report and this one of yours is that this one actually includes a reason why we should look at updating the package soon. Reports of 'new upstream version' aren't really very useful when they don't contain any information at all about what bugs that version may fix or what desirable new features it may bring. The current one we have has proven fairly stable, and nobody before you has noticed anything we are missing from the newer ones, so the urgency for updating it, at risk of introducing new bugs, has remained relatively low. I can take over as package maintainer if you don't mind. Thanks for the offer, but I'm not really looking at giving this one up entirely at this stage. Help is always welcome though, so if you do have a long term interest in this and time to spend on it, then I'd be silly not to encourage that one way or another :) For now though, the most pressing issue is to sort out how the system CGI handling should work for the next release. If you have ideas on that, maybe we should pull you in to that discussion ... Cheers, Ron -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590081: ecryptfs-utils: ecrypt-setup-private says ERROR: Cannot get ecryptfs version, ecryptfs kernel module not loaded?
On 07/24/2010 07:24 AM, Allen S wrote: Excuse my lack of knowledge, but I expected aptitude to do whatever is needed for the package to 'just work'. it just works, except that you have to load the kernel module in case it's not already loaded or built-in. Also, I thought ecryptfs was part of the kernel for a while now. Shouldn't the module already be loaded in the Squeeze kernel, and therefore the message shouldn't appear? ecryptfs is part of the kernel, debian kernels ship it as a module. modules that are not used should not be loaded. therefore ecryptfs is not loaded unless the local admin decides to do so. Is the correct action to add 'ecryptfs' to /etc/modules? if you want to always load it, yes. -- Address:Daniel Baumann, Burgunderstrasse 3, CH-4562 Biberist Email: daniel.baum...@panthera-systems.net Internet: http://people.panthera-systems.net/~daniel-baumann/ -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590157: [Build-common-hackers] Bug#590157: Bug#590157: cdbs and module-assistant: conflicting use of DEB_DESTDIR variable
On Sat, Jul 24, 2010 at 02:23:15PM +0200, Eduard Bloch wrote: #include hallo.h * Jonas Smedegaard [Sat, Jul 24 2010, 01:13:14PM]: Suggestions of how to solve[1] this is of course appreciated, as is more info on what is the actual problem here. For some reason I assumed that this issue is known to cdbs users for years. If this is not the case, please mention it in the docs at a prominent place. There is a workaround: include m-a makefile snippets first, then include CDBS, and then use the alternative variable documented in /usr/share/doc/module-assistant/HOWTO-DEVEL.gz to specify m-a output. Thanks. Is this workaround documented explicitly somewhere, so that CDBS can simply refer to that place? - Jonas -- * Jonas Smedegaard - idealist Internet-arkitekt * Tlf.: +45 40843136 Website: http://dr.jones.dk/ [x] quote me freely [ ] ask before reusing [ ] keep private signature.asc Description: Digital signature
Bug#590141: rng-tools: init-script should wait for sysfsutils
On Sat, Jul 24, 2010 at 09:20:09AM -0300, Henrique de Moraes Holschuh wrote: On Sat, 24 Jul 2010, Mario 'BitKoenig' Holbe wrote: the rng-tools init-script should depend on the start of the sysfsutils init-script: No. sysfsutils starts too late for my tastes. The right way to deal with this would actually to hook to udev and select the preferred rng as soon as it becomes available. Hmmm, nice idea, but I have no idea how to do it. I tried to search through the udev database (udevadm info --export-db) to find a way to hook the loading of via-rng but found no entry for it (quite expected: it has no own device or sysfs entry). The only thing I found was the record for hwrng, but this, of course, appears as soon as the first RNG loads. OTOH, I have nothing against adding support for this feature to rng-tools itself, which looks like a simple way to solve both problems. This would also be fine for me :) This is just a kernel interface shortcoming. We really should have a way for the RNG core to select the highest preference HWRNG (which would be the VIA Padlock one, as it is *FAST*, can generate very high quality random Well, I started a thread on the LKML: From: Mario 'BitKoenig' Holbe mario.ho...@tu-ilmenau.de Subject: b43 wireless driver inhibits access to /dev/hwrng Message-ID: 2010075212.ga19...@darkside.kls.lan Currently, it's a two-man-show between John (wlan guy) and me. If you like - comment it, probably change the subject, because changing rng core is more or less the way it currently walks :) regards Mario -- Whenever you design a better fool-proof software, the genetic pool will always design a better fool. signature.asc Description: Digital signature
Bug#573264: Also with 2.6.32-5-686 (Debian 2.6.32-15)
On Sat, Jul 24, 2010 at 13:46:41 +0100, Robert Scott wrote: FWIW I am also getting this on squeeze with ii xserver-xorg 1:7.4+4 ii xserver-xorg-core 2:1.6.3.901-1 ii xserver-xorg-video-intel 2:2.8.1-2 These are very old versions, please use the latest from sid or experimental. Linux version 2.6.32-5-686 (Debian 2.6.32-15) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:59:47 UTC 2010 It's very rare - only happened once to me at random while I was working. Please file your own bug for this. If you can reproduce it with 2.6.34 or later, grab /sys/kernel/debug/dri/0/i915_error_state after the hang and attach it to your bug (not this one). Cheers, Julien signature.asc Description: Digital signature
Bug#584500: Patch for parrot 2.6.0
Hi, Here's a patch for parrot 2.6.0. It includes the changes necessary to build rakudo 2010.07. -- Matthttp://ftbfs.org/kraai parrot_2.6.0-1.diff.gz Description: Binary data
Bug#590172: koffice-doc-html should conflict with old kpresenter data
Package: koffice-doc-html Version: 1:2.2.1-2 Severity: important Hi there, Today I installed the new version of koffice that just hit testing. I ran in to a small problem. koffice-doc-html wouldn't install until I uninstalled the old kpresenter data because they share a file. Perhaps there should be a conflicts? Mark -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (650, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores) Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash koffice-doc-html depends on no packages. koffice-doc-html recommends no packages. Versions of packages koffice-doc-html suggests: ii iceweasel [www-browser] 3.5.10-1 Web browser based on Firefox ii koffice 1:2.2.1-2KDE Office Suite ii konqueror [www-browser] 4:4.4.4-1KDE 4's advanced file manager, web ii lynx-cur [www-browser] 2.8.8dev.4-2 Text-mode WWW Browser with NLS sup ii midori [www-browser]0.2.4-3 fast, lightweight graphical web br ii w3m [www-browser] 0.5.2-6 WWW browsable pager with excellent -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#589796: saving does not work
Hi, I also encouter this bug. I apply the patch and try to scan 2 pages and save in pdf, nothing written about the save process: Expecting 26099557, found 26099557 Running sane_start for SANE_Handle 52017360 Getting parameters for SANE_Handle 52017360 gscan2pdf: scanning image of size 2480x3508 pixels at 24 bits/pixel gscan2pdf: acquiring RGB frame gscan2pdf: min/max graylevel value = 255/0 gscan2pdf: sane_read: Document feeder out of documents Scanned page /tmp/wR1g50bYOX/out3.pnm. (scanner status = 7) Closing SANE_Handle 52017360 Exiting via sane_exit Exiting via sane_exit Hope this can help... Mike -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#379608: Please close #379608
Hi. At Mon, 19 Jul 2010 10:46:29 -0400, Michael Hanke wrote: this bug report is no longer valid. latex-ucs doesn't even exist anymore and latex-beamer works just fine when installed today. But, ucs.sty is included in texlive-latex-extra, which latex-beamer doesn't depend on. So, if you don't install it, you get the same error. Do you think that we still need suggested dependency on texlive-latex-extra? Thanks. OHURA Makoto: oh...@debian.org(Debian Project) oh...@netfort.gr.jp(LILO/Netfort) GnuPG public key: http://www.netfort.gr.jp/~ohura/gpg.asc.txt fingerprint: 54F6 D1B1 2EE1 81CD 65E3 A1D3 EEA2 EFA2 77DC E083 http://www.netfort.gr.jp/~ohura/ pgpGHquBtoi9p.pgp Description: PGP signature
Bug#522698: Exclude kfreebsd architecture from openntpd build?
Hi, For a while, noone seems to care about this grave openntpd bug on the kfreebsd platform. Because of this, the package was eventually removed from testing. For people running on different architectures than kfreebsd this is very unfortunate, because they did not suffer from this grave bug. Can't we just exclude kfreebsd-* from the Architecture field in debian/control so that we don't build the package for kfreebsd (pending the kfreebsd bug getting fixed)? Regards, Robbert -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#589796: [gscan2pdf-help] Can't save PDF with gscan2pdf
also sprach Jeffrey Ratcliffe jeffrey.ratcli...@gmail.com [2010.07.24.1447 +0200]: Does it make a difference if the image is imported or scanned? Importing does not work either, here is the output: Importing /tmp/zweizeiler.pdf Format Portable Document Format Creator:TeX Producer: pdfTeX-1.40.10 CreationDate: Fri Jul 23 15:07:38 2010 ModDate:Fri Jul 23 15:07:38 2010 Tagged: no Pages: 1 Encrypted: no Page size: 595.276 x 841.89 pts (A4) File size: 18491 bytes Optimized: no PDF version:1.4 1 pages parent LC_NUMERIC C parent LC_NUMERIC C Process 18855 exited. Please apply the attached patch, which simply adds a couple of debugging messages so that I can home in on where this coming from, start gscan2pdf with the --debug option, try to save a PDF, quit, and post the output from the command line. typescript attached. No output about saving, and on quit, I was asked whether I wanted to leave the program without saving. -- .''`. martin f. krafft madd...@d.o Related projects: : :' : proud Debian developer http://debiansystem.info `. `'` http://people.debian.org/~madduckhttp://vcs-pkg.org `- Debian - when you have better things to do than fixing systems typescript.gz Description: Binary data digital_signature_gpg.asc Description: Digital signature (see http://martin-krafft.net/gpg/)
Bug#590141: rng-tools: init-script should wait for sysfsutils
On Sat, Jul 24, 2010 at 03:08:29PM +0200, Mario 'BitKoenig' Holbe wrote: On Sat, Jul 24, 2010 at 09:20:09AM -0300, Henrique de Moraes Holschuh wrote: OTOH, I have nothing against adding support for this feature to rng-tools itself, which looks like a simple way to solve both problems. This would also be fine for me :) btw. if you set /sys/devices/virtual/misc/hw_random/rng_current make sure to use echo -n, echo is not sufficient. Mario -- Damit das Moegliche entsteht, muss immer wieder das Unmoegliche versucht werden. -- Hermann Hesse signature.asc Description: Digital signature
Bug#590144: youtube-dl: Changelog claims support removed for -b and -f, but upstream removed -b and -d (NEWS correct)
Hi, Josh.
On Jul 24 2010, Josh Triplett wrote:
However, upstream actually removed -b and -d; -f still exists. NEWS has it
correct:
Ouch. I messed up. I will opt to leave this as is, because youtube-dl is
not working in testing. After it migrates, I will re-enable the patch
that I disabled and include another one.
I will try to see if upstream is interested in those, as they would be
nice to have in the stock version of youtube-dl (and patching is always
a pain).
If there is anything else that you can comment on, please let me know.
Thanks,
--
Rogério Brito : rbr...@{ime.usp.br,gmail.com} : GPG key 1024D/7C2CAEB8
http://rb.doesntexist.org : Packages for LaTeX : algorithms.berlios.de
DebianQA: http://qa.debian.org/developer.php?login=rbrito%40ime.usp.br
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590174: xserver-xorg-input-synaptics: Xserver doesn't detect Synaptics touchpad
Package: xserver-xorg-input-synaptics Version: 1.2.2-2 Severity: normal Hi, I've got a Samsung R560 laptop with a Synaptics touchpad. For some reason, the synaptics driver no-longer detects the touchpad as a synaptic one. I usually use /dev/psaux as my device, but switching to /dev/input/mouse* and /dev/input/event* devices have no effect either. Unfortunately, I'm not really sure when this broke, so I can't confirm if this coincided with some version of the xserver-xorg-input-synaptics package moving into testing. Francis -- Package-specific info: /var/lib/x11/X.roster does not exist. /var/lib/x11/X.md5sum does not exist. X server symlink status: lrwxrwxrwx 1 root root 13 May 10 2009 /etc/X11/X - /usr/bin/Xorg -rwxr-xr-x 1 root root 1878240 Jun 3 16:09 /usr/bin/Xorg /var/lib/x11/xorg.conf.roster does not exist. VGA-compatible devices on PCI bus: 01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9600M GT] (rev a1) /var/lib/x11/xorg.conf.md5sum does not exist. Xorg X server configuration file status: -rw-r--r-- 1 root root 3186 Jul 24 15:09 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: # /etc/X11/xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the /etc/X11/xorg.conf manual page. # (Type man /etc/X11/xorg.conf at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section Files FontPath/usr/share/fonts/X11/misc FontPath/usr/X11R6/lib/X11/fonts/misc FontPath/usr/share/fonts/X11/cyrillic FontPath/usr/X11R6/lib/X11/fonts/cyrillic FontPath/usr/share/fonts/X11/100dpi/:unscaled FontPath/usr/X11R6/lib/X11/fonts/100dpi/:unscaled FontPath/usr/share/fonts/X11/75dpi/:unscaled FontPath/usr/X11R6/lib/X11/fonts/75dpi/:unscaled FontPath/usr/share/fonts/X11/Type1 FontPath/usr/X11R6/lib/X11/fonts/Type1 FontPath/usr/share/fonts/X11/100dpi FontPath/usr/X11R6/lib/X11/fonts/100dpi FontPath/usr/share/fonts/X11/75dpi FontPath/usr/X11R6/lib/X11/fonts/75dpi # path to defoma fonts FontPath/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType EndSection Section Module Loadi2c Loadbitmap Loadddc Loadextmod Loadfreetype Loadglx Loadint10 Loadtype1 Loadvbe Loaddbe EndSection Section InputDevice Identifier Generic Keyboard Driver kbd Option CoreKeyboard Option XkbRules xorg Option XkbModel pc105 Option XkbLayout gb EndSection Section InputDevice Identifier Configured Mouse Driver mouse Option CorePointer Option Device/dev/input/event8 Option Protocol ExplorerPS/2 Option Emulate3Buttons true EndSection Section InputDevice Identifier Synaptics Touchpad Driver synaptics Option SendCoreEventstrue Option Device/dev/input/mouse1 Option Protocol auto-dev Option TapButton11 Option TapAndDragGesture true Option VertEdgeScrolltrue EndSection Section Device Identifier nVidia Corporation GeForce 9600M GT Driver nvidia Option DPI 96x96 Option NvAGP 1 Option RenderAccel true Option NoLogotrue Option EnableACPIHotKeys true Option AllowGLXWithComposite true EndSection Section Monitor Identifier Generic Monitor Option DPMS EndSection Section Screen Identifier Default Screen Device nVidia Corporation GeForce 9600M GT Monitor Generic Monitor DefaultDepth24 Option AddARGBGLXVisuals true EndSection Section ServerLayout Identifier Default Layout Screen Default Screen InputDevice Generic Keyboard InputDevice Configured Mouse InputDevice Synaptics Touchpad EndSection Section DRI Mode0666 EndSection Section Extensions Option Composite enable
Bug#590175: libc6-armel prevents from installing any new packages
Package: libc6 Version: 2.11.2-2 I tried to install reportbug on my phone but the installation stopped with the following output: # apt-get install reportbug Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libfreebob0 libhttp-access2-ruby1.8 irb1.8 libiec61883-0 libvorbisfile3 libwavpack1 libxxf86misc1 ruby1.8 ruby libxml-parser-ruby1.8 libuconv-ruby1.8 libgirepository1.0-0 libruby1.8 libopenssl-ruby1.8 libreadline-ruby1.8 libdpkg-ruby1.8 libfaad0 Use 'apt-get autoremove' to remove them. The following extra packages will be installed: python-reportbug Suggested packages: debconf-utils debsums dlocate python-urwid python-gtk2 python-vte python-gtkspell emacs22-bin-common emacs23-bin-common The following NEW packages will be installed: python-reportbug reportbug 0 upgraded, 2 newly installed, 0 to remove and 251 not upgraded. 1 not fully installed or removed. Need to get 238kB of archives. After this operation, 639kB of additional disk space will be used. Do you want to continue [Y/n]? Get:1 ftp://ftp.fr.debian.org unstable/main python-reportbug 4.12.4 [125kB] Get:2 ftp://ftp.fr.debian.org unstable/main reportbug 4.12.4 [113kB] Fetched 238kB in 1s (133kB/s) Setting up libc6 (2.11.2-2) ... Checking for services that may need to be restarted... Checking init scripts... Restarting services possibly affected by the upgrade: wu-ftpd: restarting...done. exim4: restarting...done. cron: restarting...done. atd: restarting...done. Services restarted successfully. telinit: Can't open u dpkg: error processing libc6 (--configure): subprocess installed post-installation script returned error exit status 127 Errors were encountered while processing: libc6 E: Sub-process /usr/bin/dpkg returned an error code (1) apt-get install reportbug Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libfreebob0 libhttp-access2-ruby1.8 irb1.8 libiec61883-0 libvorbisfile3 libwavpack1 libxxf86misc1 ruby1.8 ruby libxml-parser-ruby1.8 libuconv-ruby1.8 libgirepository1.0-0 libruby1.8 libopenssl-ruby1.8 libreadline-ruby1.8 libdpkg-ruby1.8 libfaad0 Use 'apt-get autoremove' to remove them. The following extra packages will be installed: python-reportbug Suggested packages: debconf-utils debsums dlocate python-urwid python-gtk2 python-vte python-gtkspell emacs22-bin-common emacs23-bin-common The following NEW packages will be installed: python-reportbug reportbug 0 upgraded, 2 newly installed, 0 to remove and 251 not upgraded. 1 not fully installed or removed. Need to get 238kB of archives. After this operation, 639kB of additional disk space will be used. Do you want to continue [Y/n]? Get:1 ftp://ftp.fr.debian.org unstable/main python-reportbug 4.12.4 [125kB] Get:2 ftp://ftp.fr.debian.org unstable/main reportbug 4.12.4 [113kB] Fetched 238kB in 1s (133kB/s) Setting up libc6 (2.11.2-2) ... Checking for services that may need to be restarted... Checking init scripts... Restarting services possibly affected by the upgrade: wu-ftpd: restarting...done. exim4: restarting...done. cron: restarting...done. atd: restarting...done. Services restarted successfully. telinit: Can't open u dpkg: error processing libc6 (--configure): subprocess installed post-installation script returned error exit status 127 Errors were encountered while processing: libc6 E: Sub-process /usr/bin/dpkg returned an error code (1) Now, I'm stuck because I can't configure libc6. # uname -a Linux i900 2.6.32 #3 Fri Apr 2 15:30:48 CEST 2010 armv5tel GNU/Linux -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#587967: gnash: unbuildable in sid, depends on removed boost1.40
On Fri, 2010-07-23 at 19:30 +0100, Adam D. Barratt wrote: On Sat, 2010-07-17 at 15:05 +0200, gregor herrmann wrote: On Sat, 17 Jul 2010 12:37:53 +0200, gregor herrmann wrote: Cheers, gregor, trying to build this beast right now Some hours later the build finished, and the results look reasonable to me. I'm attaching the debdiff. Miry, just shout if you want me to upload. It turns out that boost1.40 removal from testing is required in order to finish the icu migration, as boost1.40 depends on libicu42 and we can't binNMU it in unstable as it no longer exists there. I've binNMUed gnash on amd64 to check whether it will actually build by virtue of the libboost-dev final fallback build-dep. Even if that works, It didn't, as sbuild just tried to install libboost1.40-dev anyway... we may end up with a choice of temporarily breaking gnash in testing or removing it if icu is otherwise ready to go and gnash isn't, or at least isn't on all architectures. ...so we're back at needing a new upload, breaking gnash in testing or removing it. Regards, Adam -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#379608: Please close #379608
On Sat, Jul 24, 2010 at 11:16:35PM +0900, OHURA Makoto wrote: Hi. At Mon, 19 Jul 2010 10:46:29 -0400, Michael Hanke wrote: this bug report is no longer valid. latex-ucs doesn't even exist anymore and latex-beamer works just fine when installed today. But, ucs.sty is included in texlive-latex-extra, which latex-beamer doesn't depend on. So, if you don't install it, you get the same error. Do you think that we still need suggested dependency on texlive-latex-extra? You're right. The system I tried it on had textlive-latex-extra installed (I thought I removed it). And indeed it fails to build the corresponding beamer presentation if only depends are installed. I'd be glad if you could add a 'Recommends' or at least a 'Suggests' -- although I believe recommending would be more appropriate. Thanks, Michael -- GPG key: 1024D/3144BE0F Michael Hanke http://mih.voxindeserto.de -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#476862: ppp: ease CHAP calculation for plugins
OoO La nuit ayant déjà recouvert d'encre ce jour du dimanche 18 juillet 2010, vers 23:09, m...@linux.it (Marco d'Itri) disait : I need this patch to package pppd-ldap in a proper way. The other Is this patch still needed? If it is, please update it for 2.4.5. Yes, it is still needed. I will update it for 2.4.5 and will try to push it upstream. -- BOFH excuse #166: /pub/lunch pgpxoDvywHYkO.pgp Description: PGP signature
Bug#379608: Please close #379608
On Sat, Jul 24, 2010 at 10:36:41AM -0400, Michael Hanke wrote: I'd be glad if you could add a 'Recommends' or at least a 'Suggests' -- although I believe recommending would be more appropriate. Another reason for recommends would be other pieces that are also frequently used in presentations, e.g. textpos. Michael -- GPG key: 1024D/3144BE0F Michael Hanke http://mih.voxindeserto.de -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590176: RFP: devmem2 -- Simple program to read/write from/to any location in memory.
Package: wnpp
Severity: wishlist
* Package name: devmem2
Version : (no version)
Upstream Author : Jan-Derk Bakker j.d.bak...@its.tudelft.nl
* URL : http://sources.buildroot.net/devmem2.c
* License : GPL
Programming Lang: C
Description : Simple program to read/write from/to any location in memory.
devmem2 is a simple 131 lines C program, providing a CLI over /dev/mem.
Usage: devmem2 { address } [ type [ data ] ]
address : memory address to act upon
type: access operation type : [b]yte, [h]alfword, [w]ord
data: data to be written
-- System Information:
Debian Release: 5.0.5
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590177: network-manager: Please update package to 0.8.1
Package: network-manager Version: 0.8-0ubuntu3 Severity: normal There's a new version available. See git tag 0.8.1 . Please package this version. -- System Information: Debian Release: squeeze/sid APT prefers maverick-updates APT policy: (500, 'maverick-updates'), (500, 'maverick-security'), (500, 'maverick') Architecture: i386 (i686) Kernel: Linux 2.6.35-10-generic (SMP w/2 CPU cores) Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages network-manager depends on: ii dbus 1.2.16-2ubuntu4 simple interprocess messaging syst ii iprout 20100519-2networking and traffic control too ii iputil 3:20100418-1ubuntu1 Tool to send ICMP echo requests to ii libc6 2.12-0ubuntu5 Embedded GNU C Library: Shared lib ii libdbu 1.2.16-2ubuntu4 simple interprocess messaging syst ii libdbu 0.86-1simple interprocess messaging syst ii libgli 2.25.11-3ubuntu1 The GLib library of C routines ii libgud 1:151-12 GObject-based wrapper library for ii libnl1 1.1-5build1 library for dealing with netlink s ii libnm- 0.8-0ubuntu3 network management framework (GLib ii libnm- 0.8-0ubuntu3 network management framework (shar ii libnsp 4.8.4-0ubuntu1NetScape Portable Runtime Library ii libnss 3.12.6-0ubuntu3 Network Security Service libraries ii libpol 0.96-2PolicyKit Authorization API ii libude 151-12udev library ii libuui 2.17.2-0ubuntu1 Universally Unique ID library ii lsb-ba 4.0-0ubuntu8 Linux Standard Base 4.0 init scrip ii ppp2.4.5~git20081126t100229-0ubuntu4 Point-to-Point Protocol (PPP) - da ii update 0.103ubuntu1 Files shared between update-notifi ii upstar 0.6.5-6 event-based init daemon ii wpasup 0.6.10-2 client support for WPA and WPA2 (I Versions of packages network-manager recommends: ii dnsmas 2.55-1A small caching DNS proxy and DHCP ii iptabl 1.4.4-2ubuntu3administration tools for packet fi ii modemm 0.4+git.20100624t180933.6e79d15-1 D-Bus service for managing modems ii networ 0.8-0ubuntu3 network management framework (GNOM ii networ 0.8-0ubuntu3 network management framework (PPTP network-manager suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590174: xserver-xorg-input-synaptics: Xserver doesn't detect Synaptics touchpad
On Sat, Jul 24, 2010 at 15:19:19 +0100, Francis Russell wrote: I've got a Samsung R560 laptop with a Synaptics touchpad. For some reason, the synaptics driver no-longer detects the touchpad as a synaptic one. I usually use /dev/psaux as my device, but switching to /dev/input/mouse* and /dev/input/event* devices have no effect either. Unfortunately, I'm not really sure when this broke, so I can't confirm if this coincided with some version of the xserver-xorg-input-synaptics package moving into testing. Ignoring the fact that your xorg.conf is broken, the log looks like the synaptics device is detected correctly. What makes you think it isn't? Cheers, Julien signature.asc Description: Digital signature
Bug#567945: lsh-server: Does not configure on mipsel
On torsdagen den 17 juni 2010, you stated the following: Hi, sh4 has the same problem. There was the following logs in syslog. Jun 17 05:38:44 localhost lshd[26143]: lshd: Could not bind any address. The problem probably is that while lsh-server.postinst creates /etc/ssh/sshd_not_to_be_run, it doesn't actually stop sshd. I could fix that, as long as policy allows it, but the problem is that it is generally difficult to keep track of what ports and interfaces the local administrator has configured various services to use. Because two packages providing the same network service, such as HTTP/WWW, can be configured to use different ports, such packages generally do not declare conflicts with each other. Avoiding port conflicts is the responsibility of the administrator. This also means that a dependency on ssh-server is no guarantee that an SSH server is listening on port 22. Also, /etc/ssh/sshd_not_to_be_run is an old, ugly hack that should not be relied upon, and sshd could have already have been configured to listen to another port, meaning that is should not be disabled. In the case of SSH servers, it could be argued that there is little reason having more than one installed. On the other hand, I wouldn't want to remove one SSH server before I know that the next one works. At least not remotely, but on the third hand, configuring SSH servers is probably something you should do from a local console. Still though, I find it strange that lsh-server would be installed if openssh- server is already, since that would fulfil lam-runtime's ssh-server dependency. -- Magnus Holmgrenholmg...@debian.org Debian Developer signature.asc Description: This is a digitally signed message part.
Bug#590173: xserver-xorg-video-intel: XServer crashes causing gdm to restart when system left idle.
On Sat, Jul 24, 2010 at 14:55:26 +0100, Alan Chandler wrote: [ 8593.284009] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [ 8593.284031] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 876203 at 876199) [19550.644012] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [19550.644030] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 951269 at 951265) [19550.948506] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [19550.948525] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 951271 at 951265) [21837.712005] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [21837.712021] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 962917 at 962913) Can you upgrade xserver-xorg-video-intel to 2.12.0 (from experimental) and see if that still happens? If it does, try upgrading the kernel to 2.6.34 or newer. Let us know how that works out. Thanks, Julien signature.asc Description: Digital signature
Bug#590033: maint-guide: package in chapter 5.15 needs to be renamed by the user, this is not clear
Merci David. On Fri, Jul 23, 2010 at 10:14:10PM -0400, David Prévot wrote: Neither is /package/.info, and I'm sure many others. Giving an example for every one of them just to make sure that people who can't read the intro of a chapter would be able to understand any part of it is a non-issue in my point of view (anyway, it will make the document larger, and people would argue they /can't/ read it because it is too long ;-). Agreed but a generic short intro at the top of chapter may not be too bad. Just after itemrename ... itemcopy template files such as filevarpackage/var.install/file to something like filevarfoo/var.install/file to match their corresponding binary package names. IMHO this bug should be closed (or tagged wontfix), as it seems like a RTFM issue. I got a bit of the same feeling ... but what we do on the document is orthogonal problem :-) Let's keep this in positive tone as much as possible. Anyway, please find attach a proposition in order to fix it. That is constructive. It needs to be reviewed because I'm not sure how of the way dh_installman(1) works, It relies on .TH line in the file to decide where it put man page these days. but the OP might try and help on this one, and of course some approval for the wording: even if it's tiny and I tried to copy and paste from other parts of the document, you have to make sure that it's proper English... Oh, French man can always do better in English than Japanese :-) Though, our common mission is to break English supremacy by sneaking in Frangle and Japlish. Just joking ... + pSo packagegentoo/package's manual page could be installed by creating + filegentoo.manpages/file with ttdocs/gentoo.1x/tt./p Yes. Starting sentence with So ... is my usual style. This documentation uses a bit different style. I take your idea. I am thinking one of the following: option1: | This is how packagegentoo/package's filegentoo.manpages/file file looks | like to install filedoc/gentoo.1/file: option2: | To install filedoc/gentoo.1/file for the packagegentoo/package | package as manpage, you create a filegentoo.manpages/file file as: Both are followed by: | example | docs/gentoo.1 | /example Let me think a bit after good night sleep Osamu -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590178: [uscan] Extraneous quoting for dpkg --compare-versions calls.
Package: devscripts Version: 2.10.65.1 Severity: normal Tags: patch Hi, uscan calls system() with a list, so there's no need to use stuff like '$variable', that generates an extra couple of quotes, which dpkg doesn't like: | k...@bowmore:~/x/app/x11-xserver-utils.git$ LC_ALL=C uscan --no-conf --download --no-symlink --destdir . --package iceauth --upstream-version 1.0.3 --watchfile debian/watch.iceauth | dpkg: version ''1.0.3'' has bad syntax: invalid character in version number | dpkg: version ''1.0.3'' has bad syntax: invalid character in version number | iceauth: Newer version (1.0.3) available on remote site: | http://xorg.freedesktop.org/releases/individual/app/iceauth-1.0.3.tar.gz | (local version is 1.0.3) | iceauth: Successfully downloaded updated package iceauth-1.0.3.tar.gz Meaning we get to download all tarballs (see x11-xserver-utils's get-tarballs target), even though all of them are uptodate. Please find attached a tested patch. Mraw, KiBi. -- Package-specific info: --- /etc/devscripts.conf --- --- ~/.devscripts --- DEBUILD_PRESERVE_ENVVARS=PATH NMUDIFF_DELAY=2 DEBCHANGE_RELEASE_HEURISTIC=changelog DEBCHANGE_AUTO_NMU=no RMADISON_URL_MAP_udd=http://qa.debian.org/cgi-bin/madison.cgi DEBUILD_DPKG_BUILDPACKAGE_OPTS='-us -uc' -- System Information: Debian Release: sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages devscripts depends on: ii dpkg-dev 1.15.8 Debian package development tools ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib ii perl 5.10.1-13 Larry Wall's Practical Extraction Versions of packages devscripts recommends: ii at3.1.12-1 Delayed job execution and batch pr ii bsd-mailx [mailx] 8.1.2-0.20100314cvs-1 simple mail user agent ii bzr 2.1.2-1easy to use distributed version co ii chromium-browser 5.0.375.99~r51029-4+b1 Chromium browser ii conkeror [www-bro 0.9.2+git100420-2 keyboard focused web browser with ii curl 7.21.0-1 Get a file from an HTTP, HTTPS or ii cvs 1:1.12.13-12 Concurrent Versions System ii dctrl-tools 2.14 Command-line tools to process Debi ii debian-keyring [d 2010.06.08 GnuPG (and obsolete PGP) keys of D ii dput 0.9.6.1Debian package upload tool ii equivs2.0.8 Circumvent Debian package dependen ii fakeroot 1.14.4-1 Gives a fake root environment ii git [git-core]1:1.7.1-1 fast, scalable, distributed revisi ii git-core 1:1.7.1-1 fast, scalable, distributed revisi ii gnupg 1.4.10-4 GNU privacy guard - a free PGP rep ii libauthen-sasl-pe 2.1500-1 Authen::SASL - SASL Authentication ii libcrypt-ssleay-p 0.57-2 Support for https protocol in LWP ii libjson-perl 2.21-1 Perl module to parse and convert t ii libparse-debcontr 2.005-2Easy OO parsing of Debian control- ii libsoap-lite-perl 0.712-1Perl implementation of a SOAP clie ii libterm-size-perl 0.2-4+b1 Perl extension for retrieving term ii libtimedate-perl 1.2000-1 collection of modules to manipulat ii liburi-perl 1.54-1 module to manipulate and access UR ii libwww-perl 5.836-1Perl HTTP/WWW client/server librar ii libyaml-syck-perl 1.09-1 Perl module providing a fast, ligh ii lintian 2.4.2 Debian package checker ii lsb-release 3.2-23.1 Linux Standard Base version report ii lzma 4.43-14Compression method of 7z format in ii man-db2.5.7-3on-line manual pager ii midori [www-brows 0.2.4-3fast, lightweight graphical web br ii openssh-client [s 1:5.5p1-4 secure shell (SSH) client, for sec ii patch 2.6-2 Apply a diff file to an original ii patchutils0.3.1-2Utilities to work with patches ii sensible-utils0.0.4 Utilities for sensible alternative ii strace4.5.20-2 A system call tracer ii subversion1.6.12dfsg-1 Advanced version control system ii unzip 6.0-4 De-archiver for .zip files ii w3m [www-browser] 0.5.2-7WWW browsable pager with excellent ii wdiff 0.6.3-1Compares two files word by word ii wget 1.12-2 retrieves files from the web ii
Bug#590179: decibel-audio-player only build UI, then exits
Package: decibel-audio-player Version: 1.04-1 Justification: renders package unusable Severity: grave When executed from a console the output is as follows: $ decibel-audio-player $ (decibel-audio-player.py:7827): GStreamer-CRITICAL **: Trying to dispose object sink, but it still has a parent audiobin. You need to let the parent manage the object instead of unreffing the object directly. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing'), (99, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.34-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_CA.utf8, LC_CTYPE=en_CA.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages decibel-audio-player depends on: ii gstreamer0.10-plugins-base0.10.30-1 GStreamer plugins from the base ii gstreamer0.10-plugins-good0.10.24-1 GStreamer plugins from the good ii python2.6.5-9interactive high-level object-orie ii python-dbus 0.83.1-1 simple interprocess messaging syst ii python-glade2 2.17.0-2 GTK+ bindings: Glade support ii python-gst0.100.10.19-1 generic media-playing framework (P ii python-gtk2 2.17.0-2 Python bindings for the GTK+ widge ii python-mutagen1.19-2 audio metadata editing library ii python-support1.0.9 automated rebuilding support for P Versions of packages decibel-audio-player recommends: ii gstreamer0.10-plugins-ugly 0.10.15-1 GStreamer plugins from the ugly pn python-cddb none (no description available) ii python-gnome22.28.1-1Python bindings for the GNOME desk ii python-gnomekeyring 2.30.0-1+b1 Python bindings for the GNOME keyr ii python-notify0.1.1-2+b2 Python bindings for libnotify Versions of packages decibel-audio-player suggests: ii gstreamer0.10-plugins-bad 0.10.19-2+b1 GStreamer plugins from the bad s -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590180: RFP: sigil -- A WYSIWYG ebook editor
Package: wnpp Severity: wishlist * Package name: sigil Version : 0.2.3 Upstream Author : Strahinja Marković * URL : http://code.google.com/p/sigil/ * License : GPL Programming Lang: C++ Description : A WYSIWYG ebook editor Sigil is a multi-platform WYSIWYG ebook editor. It is designed to edit books in ePub format. Now what does it have to offer... * Free and open source software under GPLv3 * Multi-platform: runs on Windows, Linux and Mac * Full Unicode support: everything you see in Sigil is in UTF-16 * Full EPUB spec support * WYSIWYG editing * Multiple Views: Book View, Code View and Split View * Metadata editor with full support for all possible metadata entries (more than 200) with full descriptions for each * Table Of Contents editor * Multi-level TOC support * Book View fully supports the display of any XHTML document possible under the OPS spec * SVG support * Basic XPGT support * Advanced automatic conversion of all imported documents to Unicode * Currently imports TXT, HTML and EPUB files; more will be added with time * Embedded HTML Tidy; all imported documents are thoroughly cleaned; changing views cleans the document so no matter how much you screw up your code, it will fix it (usually) * An actually usable user interface * Native C++ application * Bugs :) * And a lot more... -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590146: apt-listbugs: unhelpful error message on broken archive
On Sat, 24 Jul 2010 10:56:49 +0200 Marc Haber wrote: [...] Reading package fields... 0%/usr/lib/ruby/1.8/debian/ar.rb:111:in `initialize': archive broken (Debian::ArError) [...] Hi Marc, thanks a lot for your bug report! I had this happen after the system crashed during package download. It would be extremely helpful if apt-listbugs would say _WHICH_ package is broken. This looks like a good suggestion. I guess it is feasible: I'll try and see how to do that (probably the Debian::ArError exception should be caught, an error message specifying the package name should be written out, and apt-listbugs should exit unsuccessfully). I hope to find the time to prepare a patch soon. Thanks again. -- http://www.inventati.org/frx/progs/scripts/pdebuild-hooks.html Need some pdebuild hook scripts? . Francesco Poli . GnuPG key fpr == C979 F34B 27CE 5CD8 DC12 31B5 78F4 279B DD6D FCF4 pgpFZt8OnV0oc.pgp Description: PGP signature
Bug#590162: maint-guide: encourage work on already packaged programs
On Sat, Jul 24, 2010 at 01:01:30PM +0200, Serafeim Zanikolas wrote: Package: maint-guide Version: 1.2.20 Severity: wishlist Hi, I believe this has been mentioned before on lists but I don't see it reflected in the newmaint guide: new contributors should be highly encouraged to adopt orphaned packages, instead of creating new ones. Especially ones providing important infrastructure part of Debian. Of course there will always be new programs that are worth packaging, but new contributors should be aware that work on viable existing packages (as opposed to packages that should be removed) is much more likely to attract sponsoring. I'll happily provide a patch (eg. for section 2.1, choose your program), if you agree on the principle. I'm not quite sure though whether that would suffice given that the whole document is aimed at creating packages from scratch, but it would at least be a step in the right direction. I am with you 100% !!! In recent changes, I have made efforts to this direction quite a bit. In 1.3 Official Debian Developer, I added: Please note that you do not need to create any new package to become an official Debian Developer. Contributing to the existing packages can provide a path to become an official Debian Developer too. There are many packages waiting for good maintainers (see Choose your program, Section 2.1). So your patch should not make duplication with this. That is the main requirement. Let me scribe few random points I am thinking: | At the start of 2.1: | Packaging random new programs may not be the best thing for | Debian, please look at and decide what | | There are many core packages which need care such as BTS triage and | security patches. | | The benefit to add random new packages is becoming less and less these | days. These comes with burden to the whole archive maintainance etc. If you can incorporate these points nicely in short English, I appreciate. The above text may be too harsh ... If there is some existing official guideline in NM process, instead of duplicating it, I like to keep short key points in this document and use pointer to the official one detailing all the good information. This way, this document can be manageable. Send patch to me, please. Osamu -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#574560: Fwd: [Bug 15575] Netbook Philco PHN 10108 doesn't supported by kernel to change LCD brightness level
-- Forwarded message -- From: bugzilla-dae...@bugzilla.kernel.org Date: 2010/7/23 Subject: [Bug 15575] Netbook Philco PHN 10108 doesn't supported by kernel to change LCD brightness level To: eribe...@eriberto.pro.br https://bugzilla.kernel.org/show_bug.cgi?id=15575 Jesse Barnes jbar...@... jbar...@virtuousgeek.org changed: What|Removed |Added Status|NEW |RESOLVED CC||jbar...@virtuousgeek.org Resolution||PATCH_ALREADY_AVAILABLE --- Comment #14 from Jesse Barnes jbar...@virtuousgeek.org 2010-07-23 19:34:03 --- Dupe of https://bugs.freedesktop.org/show_bug.cgi?id=26664, closing. -- Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug. You reported the bug.
Bug#589767: clamav: clamscan gives opposite results on mbox file vs. maildir file
[...] I had isolated the message that caused the behavior and was trying to send it along as an attachment. The debian mail server kept kicking it back to me. If you have a public key to encrypt the message, then I could send it to the BTS and would imagine that the server would accept it then. Or if you know of another, possibly a more standard, way of passing the message to you, then we could do that. I guess you could zip the file, make the archive password protected and send the password along :-) That way anybody could get a chance to read it. If you prefer the gpg variant, my public key is attached. Best, Michael -BEGIN PGP PUBLIC KEY BLOCK- Version: GnuPG v1.4.10 (Darwin) mQGiBD7dA9URBADUNq9emgf1ISRwkoXOtq17etDn4uIs+XeMqkHvUyt0XZADR/me f2JtgZuG2Mpcrg463818xIU6P6pRpyfgaijsWWVP97HxTtnAYDBOUigTU5DfTuKP tLBnvVLP6w6PLpkMnNC8+xv5eK5vVh+PPy+kdOhPZULilweeM3fSLnoaKwCg/FyU gMjN7Pi28EA+0XqxcrSnUZsEAJ/JVOeA6d49Dywbm4Vi0QLZhqQzFxUKbIbCZDUs ZQH6I+x4+UdakZU5dY8MHszEpG2j3KsNhFYTJDdJwEQSoeXZ/o63b3il1vTVzsuM oRWWB765J2ajyINthpXKWgxZMRnlTXu7DGxSA0VY5k9MOeGVG4ymQ87mFnXlMWTn /Jc2BACws/nxk5APkxrmbSeEuJpi5e02jpfYVDRbsKM6b5Rin0kYzk4mvDSnUO2y 22ZNPLZ+gRXm8dRpMj0mG6QNxPBLM6PNnGoS0weOy2DFEJXDI+RYmhEqmT57YJ26 5dfL/ItUAUmaW+KVFYWSEaIz3uZNVhqBVmhqAz6Rc+9vsGt+C7Q0TWljaGFlbCBU YXV0c2NobmlnIDx0YXV0c2NobmlnQGZvcnN5dGUudHV3aWVuLmFjLmF0PohnBBMR CAAnBQJLR3j6AhsjBQkSzAMABQsJCAcDBRUKCQgLBRYCAwEAAh4BAheAAAoJEL8e nR921SrE9AAAnRXfoUIj3C+zFE7Jkcig7wG/pHjSAJ0a1e0DHhM0pDvMV3rDLq5I lizD27Q6TWljaGFlbCBUYXV0c2NobmlnIDx0YXV0c2NobmlnQGZvcnN5dGUuY3Mu dHUtZGFybXN0YWR0LmRlPohnBBMRAgAnAhsjBQkSzAMAAh4BAheABQJKJY0xBQsJ CAcDBRUKCQgLBRYCAwEAAAoJEL8enR921SrEtcoAnihglBUXKO7OMFgb7D1C6GKh utpDAJ9gHJNb77r5Mo7EmX6B/7XD62RvdrQqTWljaGFlbCBUYXV0c2NobmlnIDx0 YXV0c2NobmlnQGZvcnN5dGUuZGU+iGcEExECACcCGyMFCRLMAwACHgECF4AFAkol jTEFCwkIBwMFFQoJCAsFFgIDAQAACgkQvx6dH3bVKsTwCgCdETvSoSygupIMHhXI cwvSeqLFrdEAn0atd2EJLl7ss5rwQdsNHKQI/dgvtCJNaWNoYWVsIFRhdXRzY2hu aWcgPG10QGRlYmlhbi5vcmc+iGcEExECACcCGyMFCRLMAwACHgECF4AFAkoljTEF CwkIBwMFFQoJCAsFFgIDAQAACgkQvx6dH3bVKsQ3QwCeJgyC8JsFEPibeIpwnLwi cslMsUwAoMbmbASJQv6SZs+jtClDvFH9iJd9tDlNaWNoYWVsIFRhdXRzY2huaWcg PG1pY2hhZWwudGF1dHNjaG5pZ0B6dC1jb25zdWx0aW5nLmNvbT6IZAQTEQIAJAUJ EswDAAIXgAUCSiWNMQULCQgHAwUVCgkICwUWAgMBAAIeAQAKCRC/Hp0fdtUqxBAT AKC6pFwVaGqyTStXHw3X31j9foAXggCgk9drrqNeY9EuBIsXSGcAYrpfSTOITAQS EQIADAUCQEXYngWDEWMuNwAKCRDLMJo+ezciXv7FAJ9ct1BstuJQo0ld7EaEqEg0 UPXFbQCeOR/3OJMy4rUX0zWqVWY2x0Ky3ZKIRgQSEQIABgUCQk3GjQAKCRA7NcYk ckuZApEDAKDFPH2xdqyCRpQMYobQ79nn9VLkIACfeyRtAsn32Go3OmpWg6417XOz nmSIRgQTEQIABgUCQk3VIgAKCRBQctA2rFg1IGT8AJ41/0ay9b/W1bEpzGl5B1qL un2JzQCeLaMoLFXc7v9ULqo9CFIF8Hjm3W2IRgQSEQIABgUCRDE5ygAKCRAA8K1u 7cpT9yp/AJ9juTDnnQBoe5dDlGUvNkTQDQq41wCfclMAziLYpO9ORnOme7/7ERFG zDaIRgQQEQIABgUCRaYWrQAKCRCYdolhntEBvzbSAJ402MVR47U+lAOYBXC9emW0 yI0szQCeOnJE0OO++26CJ9248XSjXx/OE4e0LU1pY2hhZWwgVGF1dHNjaG5pZyA8 dGF1dHNjaG5AbW9kZWwuaW4udHVtLmRlPohnBBMRAgAnAhsjBQkSzAMAAh4BAheA BQJKJY0xBQsJCAcDBRUKCQgLBRYCAwEAAAoJEL8enR921SrEvCMAoOhhNTEDR3ti NO6JE32E3xDhFhdtAKCtvcDelHhEY7oCf4GNppKH4fMNsYhGBBIRAgAGBQJEMTnK AAoJEADwrW7tylP3FTwAoKIPUe+BxzWvnbs0UfmghjJJGYElAJ9+NjdwUcd4ZS2f TT23hINDDEIVU4hGBBARAgAGBQJFphatAAoJEJh2iWGe0QG/toAAn2uiM1dUWH9h a9ut2TWiWHOdVB0iAJ0bWabcfXFYlGUxcYd5XAxb48W71rQqTWljaGFlbCBUYXV0 c2NobmlnIDx0YXV0c2NobmlnQGZvcnN5dGUuYXQ+iGcEExEIACcFAktHeEICGyMF CRLMAwAFCwkIBwMFFQoJCAsFFgIDAQACHgECF4AACgkQvx6dH3bVKsTBTwCfTPYz +JovbhshrlcluXu9+R6Uy8QAn1YpiH7VM0T9OymT++cGH8rGbbrStDZNaWNoYWVs IFRhdXRzY2huaWcgPG1pY2hhZWwudGF1dHNjaG5pZ0Bnb29nbGVtYWlsLmNvbT6I ZwQTEQgAJwUCS0d4gQIbIwUJEswDAAULCQgHAwUVCgkICwUWAgMBAAIeAQIXgAAK CRC/Hp0fdtUqxOZtAKC3H1CNYgpi167NroHbnk1bofJSjACgjHNWjKcMQoNj4cse UWOJ28JasBC0MU1pY2hhZWwgVGF1dHNjaG5pZyA8bWljaGFlbC50YXV0c2Nobmln QGdtYWlsLmNvbT6IZwQTEQgAJwUCS0eDAgIbIwUJEswDAAULCQgHAwUVCgkICwUW AgMBAAIeAQIXgAAKCRC/Hp0fdtUqxGCfAJ9G03JMKFFhHaUbDER0t05USSDRFACf dv2FBo/sbHHjqTOmJ4DXrPVySwK5AQ0EPt0D3hAEAIMRZ0AYDbFbSBbPNPH18XEA i7+ZxxS0jakg4GYD6SmSImfm/UgGkK9AqXbEop3iq8mXmDhbUR5ojBD4nkvrv5q4 nAa0RPjg/zEcTDmbL2rc1sJ/hIko8K8Lo5irTHWVmhFFWEvDfRvqSEcRLo0ibdwC MSdW0vJk/gC1lKXrY66PAAMFA/43gRFuTr2ctlT0PPr7XJ2JC0Nzq081+FEf/VFp YQXOE+C3roeqELVwikoEj3K4+YLB8BuJHWB7ipLG1ZyI2A4ZS0WBroO+zBZ56UPx SZwE68atdQ0xSbMw4gp5jhQCCi0egQ67l1eyX5qAmDTP4btUzmUBpdrsb80Nf7k8 wwOEM4hMBBgRAgAMBQI+3QPeBQkSzAMAAAoJEL8enR921SrEQlQAn2E0eTtl/djY DB4LKycQqI2kglz7AJ4m6hLSdhyUFb+hoygeZiZaN851PbkCCwRAxbGIARAA3mqy 3Yk9bp9GzzQeTsQWr+zOtOTkTq6koH22trP1S/jtABKj+6bw+379fkVQcLHGohhS 1FTjJttpmboJiOl0A+Dn+1x+Co8w3pNJqqtwfxGJHxVV+bBmQQyRySkJF6o+BqKx ik3yaUgQYS7Mg+HcHLZWIqP1GPks8Ei86OxR/RAvsK+f7gqrbld96iXsM7FzXQcV 9yqvTXLoAqSQ8QbXB6qALRWhHQPxQvocJD3yQ7hIxPhLxYhAt+LASzZ0htIuXwTW 6uRGw6cS9lKkHdYzurFCM+bOtMAQaWo4a3vlZL//QMfxUJ8dDGrqvsc83MheilIG 3L2+7Og0r33zH9CQ1WiK1JOLBiI+FtM00X23w0FskSbXzpq0RB5Pcc7S7jrH7CNR PMxkvhilfvn49ZL1lRw/C4D03mLGIFQc/XNDHn5Dy/mnvGhFAj/xH55AWrBBW8CV e7ES16SCe+0+9hWf3pD2WIBjudVhSAMCZqIPGzkKuxoX7YR1TCOB8VN1uFRbMhz9 LVZ366qgtpKiuUROyRRqQcdDrWKDDtzyL7QSReJm787CYTptilPzUPlO3QGxu2rY
Bug#587967: gnash: unbuildable in sid, depends on removed boost1.40
On Sat, 24 Jul 2010 15:20:38 +0100, Adam D. Barratt wrote: I've binNMUed gnash on amd64 to check whether it will actually build by virtue of the libboost-dev final fallback build-dep. Even if that works, It didn't, as sbuild just tried to install libboost1.40-dev anyway... That would have been my guess, too :) we may end up with a choice of temporarily breaking gnash in testing or removing it if icu is otherwise ready to go and gnash isn't, or at least isn't on all architectures. ...so we're back at needing a new upload, breaking gnash in testing or removing it. If it helps I can upload the package I built last week, with the debdiff I sent to #587967. (If you'd like me to do this please also tell me where I should upload to, i.e. DELAYED or not, which DELAYED queue, ...) Cheers, gregor -- .''`. http://info.comodo.priv.at/ -- GPG key IDs: 0x8649AA06, 0x00F3CFE4 : :' : Debian GNU/Linux user, admin, developer - http://www.debian.org/ `. `' Member of VIBE!AT SPI, fellow of Free Software Foundation Europe `-NP: Queen: Innuendo signature.asc Description: Digital signature
Bug#589796: [gscan2pdf-help] Can't save PDF with gscan2pdf
On 24 July 2010 16:14, martin f krafft madd...@debian.org wrote: Importing does not work either, here is the output: Importing /tmp/zweizeiler.pdf Format Portable Document Format Creator: TeX Producer: pdfTeX-1.40.10 Although assuming this was a two-liner from pdfTex, it probably didn't have an image in it, and therefore would have imported nothing anyway. Can you import an image (PNM, PNG, etc.) or a PDF with an image in it? Did you apply the patch before producing the debug output? -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590141: rng-tools: init-script should wait for sysfsutils
On Sat, 24 Jul 2010, Mario 'BitKoenig' Holbe wrote: On Sat, Jul 24, 2010 at 03:08:29PM +0200, Mario 'BitKoenig' Holbe wrote: On Sat, Jul 24, 2010 at 09:20:09AM -0300, Henrique de Moraes Holschuh wrote: OTOH, I have nothing against adding support for this feature to rng-tools itself, which looks like a simple way to solve both problems. This would also be fine for me :) btw. if you set /sys/devices/virtual/misc/hw_random/rng_current make sure to use echo -n, echo is not sufficient. This is a kernel bug. It means subpar sysfs handling. You're supposed to skip all spaces before AND after, not require \n, and error out with EINVAL if there is left over crap after parsing. -- One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie. -- The Silicon Valley Tarot Henrique Holschuh -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590181: gdm: Only some keys work in GDM
Package: gdm Version: 2.20.11-1 Severity: normal This is weird. This is probably a configuration issue, but I'm filing this bug report because I have no idea what went wrong. Any help would be appreciated. I just upgraded a huge swath of old stuff, including a jump from GNOME 2.26 stuff to 2.30. Kernel went from 2.6.26 to 2.6.32. Tons of stuff changed and I'm not quite sure *what* broke things, so I'd love to hear what's going on. The problem is that only *some* keys work in gdm. This makes giving usernames and passwords impossible. If I log in on console, the keyboard works perfectly. If I run startx, I get my usual GNOME session just fine, and the keyboard works perfectly in X. Using a different physical USB keyboard doesn't seem to help any. The keys in [brackets] are broken: § 1 2 3 4 5 6 7 8 9 0 + ' [Q][W] E R T [Y][U][I][O] P Å [A] S D [F][G][H][J][K][L] Ö Ä ' Z X C [V] B N M [,] . - Modifiers (shift etc) and dead keys appear to work just fine. So do space, tab, caps lock, etc. The keyboard is defined like this in /etc/X11/xorg.conf... Section InputDevice Identifier Generic Keyboard Driver keyboard Option CoreKeyboard Option XkbRules xorg Option XkbModel evdev Option XkbModel pc105 Option XkbLayout fi Option XkbVariantfi EndSection ...not that it helps any, because changing the model, layout, variant, etc doesn't seem to do anything these days. Not even setting them to en or anything seems to help; it always seems to pick the Finnish layout no matter what. Bizarre. I have no idea how to override this these days. Maybe some corrupt or obsolete file somewhere? xkb-data seems to be newest version. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core) Locale: LANG=fi_FI.UTF-8, LC_CTYPE=fi_FI.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages gdm depends on: ii adduser 3.107add and remove users and groups ii debconf [debconf-2. 1.5.22 Debian configuration management sy ii eterm [x-terminal-e 0.9.4.0debian1-2.1 Enlightened Terminal Emulator ii gksu2.0.0-5 graphical frontend to su ii gnome-session [x-se 2.30.2-1 The GNOME Session Manager - GNOME ii gnome-terminal [x-t 2.30.2-1 The GNOME terminal emulator applic ii libart-2.0-22.3.20-2 Library of functions for 2D graphi ii libatk1.0-0 1.30.0-1 The ATK accessibility toolkit ii libattr11:2.4.41-1 Extended attribute shared library ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib ii libcairo2 1.8.8-2 The Cairo 2D vector graphics libra ii libdbus-1-3 1.2.14-2 simple interprocess messaging syst ii libdbus-glib-1-20.86-1 simple interprocess messaging syst ii libdmx1 1:1.0.2-3X11 Distributed Multihead extensio ii libfontconfig1 2.8.0-2 generic font configuration library ii libfreetype62.3.7-2 FreeType 2 font engine, shared lib ii libglade2-0 1:2.6.2-1library to load .glade files at ru ii libglib2.0-02.25.6-1 The GLib library of C routines ii libgnomecanvas2-0 2.26.0-1 A powerful object-oriented display ii libgtk2.0-0 2.20.1-1 The GTK+ graphical user interface ii libpam-modules 0.99.7.1-6 Pluggable Authentication Modules f ii libpam-runtime 1.0.1-7 Runtime support for the PAM librar ii libpam0g0.99.7.1-6 Pluggable Authentication Modules l ii libpango1.0-0 1.24.2-1 Layout and rendering of internatio ii librsvg2-2 2.26.0-1 SAX-based renderer library for SVG ii librsvg2-common 2.26.0-1 SAX-based renderer library for SVG ii libselinux1 2.0.96-1 SELinux runtime shared libraries ii libwrap07.6.q-15 Wietse Venema's TCP wrappers libra ii libx11-62:1.3.3-3X11 client-side library ii libxau6 1:1.0.3-3X11 authorisation library ii libxdmcp6 1:1.0.2-3X11 Display Manager Control Protoc ii libxext62:1.1.2-1X11 miscellaneous extension librar ii libxi6 2:1.3-4 X11 Input extension library ii libxinerama12:1.1-3 X11 Xinerama extension library ii libxml2 2.7.5.dfsg-1 GNOME XML library ii lsb-base3.2-20 Linux Standard Base 3.2 init scrip ii metacity [x-window- 1:2.30.1-2
Bug#590033: maint-guide: package in chapter 5.15 needs to be renamed by the user, this is not clear
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, Le 24/07/2010 11:02, Osamu Aoki a écrit : On Fri, Jul 23, 2010 at 10:14:10PM -0400, David Prévot wrote: Neither is /package/.info, and I'm sure many others. Giving an example for every one of them just to make sure that people who can't read the intro of a chapter would be able to understand any part of it is a non-issue in my point of view (anyway, it will make the document larger, and people would argue they /can't/ read it because it is too long ;-). Agreed but a generic short intro at the top of chapter may not be too bad. Just after itemrename ... itemcopy template files such as filevarpackage/var.install/file to something like filevarfoo/var.install/file to match their corresponding binary package names. Note that this list refers to the files that are created by dh_make, and those have actual names like filegentoo.install/file (maybe keeping gentoo is fine here like in the other parts, if using foo, here, you will need to define what it does mean ;-). So I guess it will be better to add this remark earlier: [...] Some of them come with filenames prefixed by the binary package name such as ttvarpackage/var/tt. - -+--- Those presented in this chapter prefixed by ttvarpackage/var/tt which are not created by prgndh_make/prgn must of course be renamed to something like filevarfoo/var.install/file to match their corresponding binary package names. - -+--- Take a look at all of them. It needs to be reviewed because I'm not sure how of the way dh_installman(1) works, It relies on .TH line in the file to decide where it put man page these days. Sure (I've read the manpage ;-), but my concern is about the syntax of the file /package/.manpages: should the file be named with their path from the top level of the source code (the proposition here fits this comportment), or from the debian/ one, ore the debian/build/ one or even the debian/tmp/ one (ore looking in every one of them, in this order, I think I've read something like that a few time ago but can't remember right now)... Yes. Starting sentence with So ... is my usual style. This documentation uses a bit different style. I take your idea. I am thinking one of the following: option1: | This is how packagegentoo/package's filegentoo.manpages/file file looks | like to install filedoc/gentoo.1/file: option2: | To install filedoc/gentoo.1/file for the packagegentoo/package | package as manpage, you create a filegentoo.manpages/file file as: Both are followed by: | example | docs/gentoo.1 | /example The man page in gentoo source code is named exactly: filedocs/gentoo.1x/file, we may want to keep it that way (it is actually installed by dh_installdirs in gentoo's source code). For what is worth, I prefer your second option, but IMHO, make the intro as clear as possible is the best way to close this bug. Cheers David -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) iEYEARECAAYFAkxLDLoACgkQ18/WetbTC/oScACfeiXq1kdYTEuLCR1lrjkfFhDv YQkAoIQiLJ7i2bkxqatFOUxOxLZe42h/ =0TbX -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590182: ITP: fgrun -- FGRun is a graphical frontend for running FlightGear
Package: wnpp Severity: wishlist Owner: Christopher Baines cbain...@gmail.com * Package name: fgrun Version : 1.5.2 Upstream Author : Frederic Bouvier (Project admin) fr...@users.sourceforge.net * URL : http://fgrun.sourceforge.net/ * License : GPL Programming Lang: C++ Description : FGRun is a graphical frontend for running FlightGear FlightGear Launch Control (FGRun) is a graphical frontend for running the FlightGear Flight Simulator. It allows you to select a airport and aircraft, and includes advanced options like launching from an aircraft carrier or, changing the screen resoluton. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
