Tested with unix socket looper server and client progrrams
and saw no I/O percentage on behalf of either program. At the
time I filed this bug I was having a lot of problems with sluggish
performance and VM stress (as reported by 'sar -B' and atop
among other diagnostic tools).
: /usr/share/doc/systemtap/README.Debian should help you get started.
--
Dominique Brazziel dbrazz...@snet.net
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Just installed systemtap(-client) 2.5 and ran the iotop.stp
on Fedora 20 without problems. The systemtap release page
(https://sourceware.org/systemtap/wiki/SystemTapReleases) lists
2 versions out (2.4, 2.5) since the current sid version of systemtap (2.3-2.3).
--
To UNSUBSCRIBE,
Sorry, had a task switch and forgot all about this. I will give it a shot
tomorrow and report back.
--
Dominique Brazziel dbrazz...@snet.net
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
I am very interested in this and would like
to study and help out if I can. At worst my own understanding
will grow.
I have been affected by this bug for awhile (silent fail of anacron job
runs on resume), and was left hanging on the cliff after reading 'man
systemd-sleep':
Note
Package: xfburn
Version: 0.5.2-1
Severity: important
Dear Maintainer,
xfburn needs library 'libgstid3demux.so' from
'gstreamer0.10-plugins-good' to demux mp3 id3 tags.
Although the same library exists in 'gstreamer1.0-plugins-good',
xfburn fails until the 0.10 version of the good plugins
Colord reports the device/profile(s) getting registered when CUPS (?)
wakes up about every 13 minutes, then I see the 30 second
timeout. This sequence happens throughout the day.
journalctl -b _COMM=colord
-- Logs begin at Mon 2014-06-30 08:36:07 EDT, end at Sun 2014-08-10
09:37:11
No cups respawns or the attendant
colord messages since putting 'SystemdIdleExit off'
in 'cupsd.conf'. I remain perplexed as to why cups kept waking up
(on socket activation I reckon) when no jobs were printing
and no web interface was active. I guess I could
look into the cups
Before I was using shared printer(s) via IPP,
but once I removed them from the local configuration
and deleted and redefined one printer (HPOJ7410),
things looked better, no retrying to register a
color profile on a remote printer:
D [07/Aug/2014:21:08:32 -0400] FindDeviceById failed:
This was just since boot:
Aug 6 08:42:40 dell2800 colord: Automatic remove of HPOJ7410-Gray..
from cups-HPOJ7410
Aug 6 08:42:40 dell2800 colord: Profile removed: HPOJ7410-Gray..
Aug 6 08:42:40 dell2800 colord: Automatic remove of HPOJ7410-RGB.. from
cups-HPOJ7410
Aug 6 08:42:40 dell2800
Package: vinagre
Version: 3.12.2-1
Severity: normal
Dear Maintainer,
F10 does not get send to remote session, but instead
triggers the vinagre 'Remote' menu. There seems to be
no way of configuring the F10 key either in vinagre
or in lightdm. This renders the F10 key in mc, among
others,
But this is not optimal. When UPower
would invoke pm-utils, I could tell systemd to
ignore Lid switch, sleep and power buttons and,
after configuring xfce4-power-manager to suspend
on each of those actions, the system would suspend
just fine.
Now, nothing happens even after
Should be some sort of depends on systemd 208-6 against
upower or xfce4-power-manager or both.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
They were for old, invalid shares.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Suspend still greyed out on xfce4-power-manager,
and systemd is not handling the lid switch or power button
despite telling them to do so (suspend) in /etc/systemd/logind.conf.
Right now the only way to suspend is by manually running
pm-suspend from pm-utils, the functionality that was
I set '--timeout=600' in 'auto.master'
and every ten minutes I get the following sequence
of messages in syslog:
Jul 19 13:25:06 debianx kernel: [154855.959756] CIFS VFS: cifs_mount
failed w/return code = -13
Jul 19 13:25:06 debianx kernel: [154856.058968] CIFS VFS: Send error in
Package: youtube-dl
Version: 2014.06.19-1
Severity: important
Tags: upstream
Dear Maintainer,
Problem with encrypted signature(s), unable to download youtube
videos. This was reported upstream a few days ago, there is
now a one line patch that fixes the error.
From the 'README.txt' in youtube-dl source:
sudo curl https://yt-dl.org/latest/youtube-dl
-o /usr/local/bin/youtube-dl
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
After going to the Adobe site
(https://www.adobe.com/software/flash/about/)
to see about downloading a later version of the plugin, I noticed that
the latest version of Adobe Flash plugin is 13.0.0.214, but
package 'flashplugin-nonfree' only provides 11.2.202.359.
Package
Packagekit daemon wakes up and does 'get-updates'
and 'update-packages' transactions while I'm asleep and
make no complaints. I'm happy.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: packagekit
Version: 0.8.17-1
Severity: normal
After libglib2.0-0 upgrade to 2.40.0, message log
shows many messages at intervals of type shown in the
bug title. This same problem surfaced in vim, as reported
by http://bugs.debian.org/743668. Root cause according to
the libglib
backends/dummy/pk-backend-dummy.c
client/pk-console.c
contrib/command-not-found/pk-command-not-found.c
contrib/browser-plugin/pk-plugin-install.c
lib/packagekit-glib2/pk-control.c
lib/packagekit-glib2/pk-client-helper.c
lib/packagekit-glib2/pk-progress-bar.c
lib/packagekit-glib2/pk-self-test.c
Package: gnome-terminal
Version: 3.10.1-1
Severity: normal
Dear Maintainer,
Following the following libglib2.0-0 upgrade to my testing system
on 4/10/14
[UPGRADE] libglib2.0-0:i386 2.38.2-5 - 2.40.0-2
every time a new terminal window or tab is opened
messages of the following type are
Could only test with i915_drv_video.so symlinked to
i915_dri.so because i915_drv_video.so is not shipped anywhere
(see https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=670377).
libva info: VA-API version 0.34.0
libva info: va_getDriverName() returns 0
libva info: Trying to open
One last note on this, the upstream bug 1006386 should
probably used as a reference for this problem as it really drills down
to root cause of the slow journal access.
https://bugzilla.redhat.com/show_bug.cgi?id=1006386
--
To UNSUBSCRIBE, email to
https://bugzilla.redhat.com/show_bug.cgi?id=983688
https://bugzilla.redhat.com/show_bug.cgi?id=1005399
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: iotop
Version: 0.6-1
Severity: normal
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
iotop -o shows gnome-shell doing I/O (non-zero '%I/O' value) when in fact
no disk I/O is being done by gnome-shell.
Package: atop
Version: 1.26-2
Severity: wishlist
Dear Maintainer,
The latest upstream version is 2.0.2. I have just downloaded the
tarball and installed it with 'make install', no trouble at all. See the
following for
details (included changelogs):
Package: gnome-panel
Version: 3.4.2.1-6
Severity: important
The little weather icon does not show anymore.
I reviewed all the old bugs about the time zone matching
the location and tried all that, but still no weather icon.
The removal of the gweather applet in the update to
gnome-applets
Package: dbus
Version: 1.6.14-1
Severity: normal
Dear Maintainer,
I first noticed this bug in Fedora and it is detailed
at https://bugzilla.redhat.com/show_bug.cgi?id=768206.
The easy workaround is to add 'StandardError=null' to
the systemd dbus.service file.
-- System Information:
Debian
update-initramfs: Generating /boot/initrd.img-3.10.11-1inter02-686-pae
/usr/share/initramfs-tools/hooks/resume:
1: /usr/share/initramfs-tools/hooks/resume: bin/sh: not found
--- resume~ 2013-10-04 17:40:14.794114671 -0400
+++ resume 2013-10-04 17:45:54.744382033 -0400
@@ -1,4 +1,4 @@
ack, my mistake. I think I had a vim error searching for blikd. )
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: apt-cacher-ng
Version: 0.7.18-1
Severity: normal
Dear Maintainer,
In the last couple weeks the daily cron job which calls
'expire-caller.pl' has been sporadically emitting messages
with only a number with no further edifying text, i.e.:
Sep 12 06:36:30 asusb202
Attached is a patch to check if NAT is on
and if iptable_mangle is loaded (hence is on)
before flushing, deleting and zeroing their
respective chains.
--- scriptwriter.c 2005-01-29 07:32:08.0 -0500
+++ scriptwriter.c.new 2013-09-03 05:51:13.363810627 -0400
@@ -213,12 +213,16 @@
This line
-a -e ${MODSDIR:-$APACHE_CONFDIR/mods-enabled}/disk_cache.load ] \
Needs to read
-a -e ${MODSDIR:-$APACHE_CONFDIR/mods-enabled}/cache_disk.load ] \
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
The abort doesn't happen when doing the steps
in the console (virtual terminal).
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
For some reason the F10 menu accelerator
was set in gnome-terminal. Once I unchecked that
setting the abort on quit disappeared. It's also
instructive that the error did not occur in
the console (as noted previously), while being
straced, or in xterm.
--
To UNSUBSCRIBE, email to
Package: evolution
Version: 3.4.4-3
Severity: normal
After the message is successfully sent, the
GUI window closes but the process remains active.
Will post strace output later.
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (990, 'testing'), (500,
Source: debian-reference
Severity: normal
The section regarding compiling the kernel source references
linux kernel version 2.6 but stable is now 3.2.46+ and testing
is 3.9.8-1. Also, the deb-pkg target is recommended but
the section about using 'make-kpkg' which used to be included and
Package: apache2
Version: 2.4.6-2
Severity: important
Dear Maintainer,
After upgrade from apache 2.2 to apache 2.4 the init script
(/etc/init.d/apache2) and cron job (/etc/cron.daily/apache2)
try and fail to invoke '/usr/sbin/htcacheclean'. I don't know
if that module was included with
I had the same problem, not just with backuppc, but
other documentation sites (i.e. dhelp) on localhost. It
seems like the upgrade to apache 2.4 moved away from
sites-enabled -- sites-available symlinks to a
conf-enabled -- conf-available symlink model.
I was able to activate
The init file 'start-htcacheclean' stanza
tries to invoke function 'start_htcachelean' which
should be 'start_htcacheclean'.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
I think the upgrade disabled all locally
defined sites and they have to be re-enabled with
'a2ensite'. Apache upgrades are always a pain,
but this one was particularly piss poor.
See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=717476
message #38 for more on the subject of sites
Package: chromium
Version: 28.0.1500.95-3
Severity: important
Dear Maintainer,
Each time I use a web site with embedded video (i.e. espnradio.com,
freesportsbet.com), the .xsession-error log is flooded with error messages:
[15103:15103:0806/232839:ERROR:vsync_provider.cc(70)]
Package: libapache2-mod-musicindex
Version: 1.3.7-2+b1
Severity: important
Dear Maintainer,
I guess all apache2 modules should be rebuilt due
to upstream ABI changes. I am getting updates for
apache 2.4 but they can't be installed because of
dependencies on apache2.2-common from a few
It looks like the 'pk_control_set_root_async'
function was at some point declared in 'pk_control.h' in
package 'libpackagekit-glib2-dev' but it doesn't seem
to be there anymore. Also, I can't find any the symbol
in the .so library from 'libpackagekit-glib2-16'.
--
To UNSUBSCRIBE,
Package: gnome-applets
Version: 3.4.1-3
Severity: normal
Dear Maintainer,
The temperature is displayed in the 'Details'
section if I click on the icon, but it is not
displayed next to current conditions icon on
the panel.
-- System Information:
Debian Release: jessie/sid
APT prefers
Package: gnome-settings-daemon
Version: 3.4.2+git20121218.7c1322-6+b1
Severity: important
Updates plugin broken. The following series of messages in
appear in '.xsession-errors':
** (gnome-settings-daemon:4553): WARNING **: Failed to connect context: OK
** (gnome-settings-daemon:4553):
Package: ifenslave-2.6
Version: 1.1.0-21
Severity: normal
Dear Maintainer,
Package iproute has recently transitioned to iproute2:
iproute
[...]
Description-en: transitional dummy package for iproute2
This is a transitional dummy package to get upgrading systems to
Osiris, you are entirely correct regarding
the empty restart|force-reload|reload) stanza of
'/etc/init.d/anacron' being empty. The reason
'restart' works in this (or any LSB init script in
a systemd environment) context is because the action is
intercepted systemd, which, finding no
In an effort to further isolate causes of
my print hangs, I ran a print job without first
shutting down either firefox or chromium processes.
I thought if the job would run reasonably with
a low amount of free (real) RAM it might make a
stronger case for the 'default-pdftops-renderer'
Filed upstream bug #694360
http://bugs.ghostscript.com/show_bug.cgi?id=694360
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
In my case I was able to print a larger pdf
(~700k, 23 pages) reasonably quickly by performing
the following two steps before initiating the print job:
1) Close firefox and a few chromium tabs to free up as much
memory as possible. In my case there was about 150M of
RAM free
Package: vuze
Version: 4.3.0.6-5
Severity: normal
Dear Maintainer,
With 'Minimize minimizes to system tray' checked,
after minimizing, double clicking on the Vuze icon in
the system tray or right clicking the icon and selecting
'Show Vuze' fails to display the vuze window with the
following
Package: gnome-menus
Version: 3.8.0-1
Severity: normal
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
Tried to select Calculator (gcalctool) from Applications/Accessories
* What exactly did you do (or not do)
Added gnome-calculator to Applications/Utilities by doing:
1. cd /usr/share/app-install/desktop
2. cp ./gcalctool.desktop ./gnome-calculator.desktop
3. xdg-desktop-menu install ./gnome-calculator.desktop
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject
I have been hit extremely hard by this bug for about a month
or two now, but it certainly wasn't present in the past. On my
system the GUI completely freezes, the clock on the top panel stops
on the second after CUPS/Ghostscript/hpcups start doing their thing,
and all mouse and keyboard
I reworked the cases where apt was not
called by sudo. Patch now correctly checks for
existence of the APT_LISTCHANGES_USER key and
defaults to USERNAME if ALU key is not there.
I haven't been able to discern where
$USERNAME is set, but it is reliably there
as the original
$USERNAME is set by gdm3 in
gdm-session-worker/gdm_session_worker_update_environment_from_passwd_info
along with $LOGNAME/$USER/$HOME/$SHELL. I imagine
KDE has similar functionality so $USERNAME should
suffice as a default non-root user in the event
$SUDO_USER and
Attached is a patch I wrote to enable the 'browser' frontend to
be launched as $SUDO_USER, or $APT_LISTCHANGES_USER.
If neither is set the $LOGNAME user is used.
apt_listchanges_launch_browser_nonroot.patch
Description: Binary data
With options 'defaults,comment=systemd.automount,noauto' the
behavior is like it was with automount and mount units in effect, i.e.
the partitions are mounted after first reference.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe.
Hmmm, using 'comment=systemd.automount' for the
two partitions in question has them mounted but without
'noauto' I think they might be mounted automatically
when the fstab is parsed as opposed to mounting later
when needed. For instance I had a dependency on
'backup.automount' for
Package: systemd
Version: 44-7
Severity: important
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
Trying to implement lazy mounting of music and backup partitions on
external USB drive using 'x-systemd.automount' as
Package: systemd
Version: 44-5
Severity: normal
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
Attempt to reload any service configuration (i.e. udev, autofs, distcc,
etc.)
* What exactly did you do (or not do)
Thanks, Tomas! OK to close. I will look into
Gsettings some more, it seems odd to me that this problem
occurs only in VNC session.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: libatasmart4
Version: 0.19-1
Severity: normal
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
Trying to get SMART data refreshed at regular intervals
* What exactly did you do (or not do) that was
Package: gnome-mplayer
Version: 1.0.6-1
Severity: important
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
Trying to play m3u audio playlist created by 'libapache2-mod-musicindex'
* What exactly did you do (or not
Package: atop
Version: 1.26-2
Severity: normal
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
Nightly cron job '/etc/cron.d/atop' executes atop _cron
* What exactly did you do (or not do) that was effective (or
I was able to get the main binary to
build by running dpkg-buildpackage first, then
make.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: prelink
Version: 0.0.20090925-6
Severity: grave
Justification: renders package unusable
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
Trying to build the package to insert more diagnostic output
(reference
This bug should be severity serious or grave IMO. The
package doesn't work and there is no real roadmap to
help the user try and get it to work. I tried adding
every library and binary to the blacklist as they
come caused a forced prelink to choke, but it seems
never ending and when I
Attached is xev trace output from gnome-terminal in
a VNC session. I navigated to the window and pressed and released the
up arrow then the down arrow. Then I pressed and released the up and
down arrows from the numeric keypad. Note
that KeyPress events were only generated for the
I have a large '/usr/local' partition containing lots of source code
and merging '/usr' into '/' would be non-trivial.
Would it be possible to work around the problem by copying the library
to the '/lib/...' directory so it is included in the initramfs image?
Would systemd be able
Package: tracker
Version: 0.14.1-1
Severity: minor
Tags: patch
Dear Maintainer,
The man page description of tracker-store has a
discontinuation:
...instead other processes do that and serves as a daemon
waiting for such requests...
I think what was meant was this
From the clean run today at 16:25 EST:
Checking/Updating
security.debian.org/dists/testing/updates/contrib/binary-i386/Packages.bz2...
i(0KiB)/i
Then, from the second run at 16:44 EST:
Checking/Updating
security.debian.org/dists/testing/updates/contrib/binary-i386/Packages.bz2...
font
Today it was just the one maint_ log, even though this morning I had
manually run the expire-caller with the path check and checksum options
in effect, saw some 'Bad' files, tagged them and deleted them, then also
immediately deleted debs scheduled for removal. Everything looked nice
and
Please apply the patch ASAP, as the correct filename
to parse the data is arguably the most important part of the
configuration file and without the patch who knows what, if anything, is
being sent out. Without the correct file name string the whole package
fails. The priority of this
Per the 'Debian Linux Kernel Handbook' chapter 'Common kernel-related
tasks'
(http://kernel-handbook.alioth.debian.org/ch-common-tasks.html#s-common-official)
I tried:
make KDEB_PKGVERSION=1.0_xxx deb-pkg
and the build went OK until the final step(s) to produce the
image .deb file:
It seems that the gnome-settings-daemon 'updates' plugin
is responsible for many of the packagekit updates, as
'gsd-updates-refresh' indicates:
#define PERIODIC_CHECK_TIME 60*60 /* poke PackageKit every hour */
I run rsyslog which receives messages from another machine which runs 2
I ran bustle-dbus-monitor for a couple of hours this morning on a
lightly loaded system (a VNC session actually) and mailed you the
output. I saw a few PackageKit signals in there, hope it is of some
use.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a
Got it - the distro upgrade functionality should be there for those who
want it, but because it is not working properly in some instances, noise
about package management is generated in both .xsession-errors and
syslog.
Those, like myself, who do not want any _additional_
Hello, Matthias! Thank you for your quick reply.
This pair of messages appears all through '.xsession-errors':
(gnome-settings-daemon:4690): PackageKit-WARNING **: couldn't parse
execption
'GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._pk_5ftransaction_5ferror.Code4:
GetDistroUpgrades not
This message does not coincide with me trying to use
packagekit to do distribution or any other upgrades, but rather
coincodes with the following spam pair in my syslog (on three different
machines, mind you):
dbus[1670]: [system] Activating service
name='org.freedesktop.PackageKit'
Package: packagekit
Version: 0.7.3-2
Severity: normal
Dear Maintainer,
Why is packagekit starting up throughout the day? There is no
indication in the messages which component is sending the message to
start packagekit, just a dbus message indicating that the service
was started:
Package: packagekit-docs
Version: 0.7.3-2
Severity: normal
Dear Maintainer,
The following overview type files are missing from the packagekit-docs
package:
introduction-backends.html
introduction-cancellation.html
introduction-errors.html
introduction-group-type.html
Package: packagekit
Version: 0.7.3-2
Severity: normal
Dear Maintainer,
They come in pairs:
(gnome-settings-daemon:3167): PackageKit-WARNING **: couldn't parse execption
'GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._pk_5ftransaction_5ferror.Code4:
GetDistroUpgrades not supported by
Defining the URL opener in one module and trying to use it another
still resulted in namespace type errors (Global name 'changelog_opener'
not found, etc.). One line change to
UpdateManager/DistSpecific/changelog.py seems to work:
#connection = urllib2.urlopen(url)
connection =
Package: update-manager-core
Version: 0.200.5-2
Severity: normal
Dear Maintainer,
When apt proxy is set to an apt-cacher-ng server, a new
URL handler is built to handle HTTP downloads (see
'UpdateManager/Frontend/Gtk/utils.py'), which works
for packages, but causes an HTTP error 403 when
I just found out a case where the changelog viewer fails to download
the changelog when '/etc/apt/apt.conf.d/NNproxy' is set, as can be seen
in the apt-cacher-ng server access log, i.e.:
403 Forbidden file type or location:
The basic idea is to create a second 'changelog opener'
in the same place in which the opener including proxy_support
is created (UpdateManager/Frontend/Gtk/utils.py):
# Create a changelog URL opener
LOG.debug(Creating changelog URL opener.)
changelog_opener =
When I print from iceweasel I can't see the headers or footers. I am
using an HP Deskjet 6122 with the deskjet 990C driver (I tried hpcups,
the deskjet 6122 driver, and hpijs - all failed also). The output from
'Print Test Page' shows a nice border
around where I suppose the hardware
I am running version 3.0.4-4 (wheezy) and this problem
persists. Neither manually setting
'/apps/gdm/simple-greeter/disable_user_list' to true in
'/etc/gdm3/greeter.gconf-defaults' and/or setting the key using
gconf-editor disables the user list.
--
To UNSUBSCRIBE, email to
Got it working again by doing the following (I have backup data going
back a few weeks for home directory):
1. Delete all under '~/.gconf/apps/evolution'
2. Reinstall evolution (that brought in one config key - %gconf.xml)
3. Start evolution and first run wizard ran - cancelled.
4.
Package: pm-utils
Version: 1.4.1-9
Severity: minor
Tags: patch
Dear Maintainer,
The log messages written by function '_run_hook()' from
'/usr/lib/pm-utils/pm-functions' outputs a blank line after
writing the Running hook... message so there is a blank
line separating the start and finish
I am no longer experiencing this problem, OK to close..
The gnome bugzilla problem report is 670087:
https://bugzilla.gnome.org/show_bug.cgi?id=670087
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: evolution
Version: 3.2.2-1
Severity: grave
Justification: renders package unusable
Looks like the window gets built, then segfault.
Attached is the backtrace. See also libcairo2 bug:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=657097
-- System Information:
Debian Release:
Attached is another gdb backtrace with evolution and libcairo2 debugging
symbols.GNU gdb (GDB) 7.3-debian
Copyright (C) 2011 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html
This is free software: you are free to change and redistribute it.
Package: gnome-applets
Version: 3.2.1-1
Severity: grave
Justification: renders package unusable
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
Package: libcairo2
Version: 1.10.2-6.2
Severity: normal
Dear Maintainer,
evolution
evolution-shell-Message: Network disconnected. Forced offline.
(evolution:9620): GLib-GObject-WARNING **: g_object_notify: object class
`EMailTabPicker' has no property named `enabled'
101 - 200 of 686 matches
Mail list logo