Package: tinysnmp-agent
Version: 0.8.4
Severity: normal
This package should conflict with the snmpd package as the daemons
of both packages are trying to bind to the same ports.
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (750, 'testing'), (650, 'unstable'),
Package: munin-node
Version: 1.2.3-1
Severity: normal
The postfix plugins seems to detect a postfix installation differently.
I have systems with postfix installed and systems with exim (and no
postfix) installed. munin activates the following of the postfix
plugins:
system with postfix mailer:
On Oct 09, Loïc Minier wrote:
Any progress with newer Galeon + Mozilla + GNOME 2.10?
The situation is still the same, but I'm on sarge with gnome 2.8:
Versions of packages galeon depends on:
ii debconf1.4.30.13 Debian configuration management sy
ii galeon-common
Package: apt-listbugs
Version: 0.0.57
Followup-For: Bug #389681
This bug still exists in version 0.0.57:
Retrieving bug reports... 0% ... E: undefined local variable or method `pkg'
for Factory::BugsFactory:Module
E: Sub-process if dpkg -s apt-listbugs | grep -q '^Status: .* ok installed';
Hi
On Oct 03, Junichi Uekawa wrote:
Could you reproduce a full screen log for the apt session? Which
package you tried to install, etc.
# apt-get upgrade
Reading package lists... Done
Building dependency tree... Done
The following packages have been kept back:
freeguide (0.8.6-1 =
If the network connection does matter in any way: I have to use a
http-proxy here, the network has no direct routing to the internet.
Regards,
Uwe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hi
On Oct 04, Junichi Uekawa wrote:
.58 fixes the issue with http-proxy, please try.
This is what I get with .58 installed:
# apt-get upgrade
[..]
35 upgraded, 0 newly installed, 0 to remove and 6 not upgraded.
Need to get 0B/46.0MB of archives.
After unpacking 824kB of additional disk space
Hi
On Oct 06, Junichi Uekawa wrote:
Have you read the manpage?
No, at least not the one from the new version :).
I just have done it ...
If you have configured proxy in your apt.conf, you don't need to think
about it, but If you are configuring your proxy with HTTP_PROXY
variable set, you
Hi
On Oct 06, Junichi Uekawa wrote:
Could you try to reproduce with
/usr/sbin/apt-listbugs list apt-listbugs -d
# /usr/sbin/apt-listbugs list apt-listbugs -d
http_proxy: http://http-proxy:8080/ : http-proxy 8080
http://bugs.debian.org:80/
indexdir = /indices/
Reading
Package: gpsdrive
Version: 2.09-2.1
Severity: important
gpsdrive fails to download map files both from the US and the
german expedia server.
It shows Using proxy and port: http-proxy 8080 in the download
window, which is correct, but at the shell where I have started it
I get the message:
Hi Andrew
Sometimes is a bit difficult to track down. I have a test environment now
though, is there any way to reproduce this reliably that you know of?
No. My internet provider (fortunately) has fixed it's problems and this
bug hasn't happen to me since your mail. I don't know of any way to
Package: ntpdate
Version: 1:4.2.2.p4+dfsg-2
Severity: minor
Please adjust the logcheck entry in /etc/logcheck/ignore.d.server/ntpdate
to also filter the following type of messages:
Aug 5 20:56:03 c2 ntpdate[21553]: adjust time server 130.149.17.21 offset
0.068867 sec
(change 'step' to
Package: fvwm1
Version: 1.24r-51.2
Severity: minor
fvwm1 provides a wrong link to the fvwm manpage for update-alternatives:
link target: /usr/share/man/man1/fvwm1.1x.gz
manpage: /usr/share/man/man1/fvwm1.1.gz
Regards,
Uwe
-- System Information:
Debian Release: 4.0
APT prefers stable
Package: pvm
Version: 3.4.2-17
Severity: grave
Justification: renders package unusable
pvm needs libpvm3.so.3, which is in package libpvm3:
$ ldd /usr/bin/pvm
libpvm3.so.3 = not found
libc.so.6 = /lib/libc.so.6 (0x40029000)
/lib/ld-linux.so.2 = /lib/ld-linux.so.2
Package: bzflag
Version: 2.0.0.20050118
Severity: normal
bzflag segfaults if I change video resolution in the options menu.
After 2 tries of restarting, mode changing and crashing I tried to
start it with strace to get a syscall trace of the crash.
But then bzflag freezes my complete I/O-system
Package: bzflag
Version: 2.0.0.20050118
Severity: wishlist
Hi,
as bzflag version 2 needs more hardware power and is incompatible
to all the bzflag-version-1-servers out there it would be nice to have
both version 1 and version 2 of bzflag installable together, i.e. to
have a bzflag1 and a
Source: bzflag
Source-Version: 2.0.0.20040117
We believe that the bug you reported is fixed in the latest version of
bzflag, which is due to be installed in the Debian FTP archive:
As bzflag version 2 is incompatible to bzflag(-server) version 1
it would be nice to have this bug also fixed
Package: bzflag
Version: 2.0.0.20050118
Severity: normal
I don't know if this is really bzflag related or if this is a driver
issue. But I don't have this errors with bzflag version 1 or other
games like Quake2.
I know an Intel 845G is not a good choiche for gaming ;-).
But it's not a so
Hi Sven
Does this bug still happen with gnome-control-center version
1:2.18.1-1 (or later) on an up to date testing/unstable system?
Unfortunatly I don't have any testing or unstable system at the moment,
so I cannot check this.
I guess this is because the gnome-settings-daemon is launched.
Package: openswan
Version: 1:2.4.6+dfsg.2-1.1
Severity: normal
The key generation during the openswan installation took more than 40
minutes on my system without any warning. The installation hung between
the following two lines:
Setting up openswan (2.4.6+dfsg.2-1.1) ...
Successfully
On Oct 14, Rene Mayrhofer wrote:
This seems like your system did not have any entropy. Is it diskless?
No, it's a normal PC system, freshly installed with Etch, standard system.
Though the disk is small (4 GB) if that matters.
I don't know how the entropy is calculated, but it looks like the
Package: nxtvepg
Version: 2.7.6-1
Severity: normal
If nxtvepg runs in client/server mode the client creates the directory
~/.nxtvdb but it does not save any provider databases there. This results
in an empty program list after each program start. You have to wait
several minutes until you get a
Package: nxtvepg
Version: 2.7.6-1
Severity: wishlist
There's a newer version of nxtvepg available from upstream
(http://nxtvepg.sourceforge.net/changelog.html).
Regards,
Uwe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: tvtime
Version: 1.0.2-0.2
Severity: normal
While upgrading from sarge to etch I get the following error message:
Setting up tvtime (1.0.2-0.2) ...
Creating video devices in `/dev'.
/var/lib/dpkg/info/tvtime.postinst: line 155: ./MAKEDEV: No such file or
directory
The postinst script
Package: gdb
Version: 6.4.90.dfsg-1
Severity: normal
gdb fails to read all symbol information for the debugged program:
(gdb) run
Starting program: /tmp/sleep
Failed to read a valid object file image from memory.
Program received signal SIGINT, Interrupt.
0xb7f2c410 in ?? ()
(gdb) bt
#0
On Nov 03, Daniel Jacobowitz wrote:
Is libc6-dbg installed on the system which produced the above
backtrace? Does installing it help?
It wasn't. But installing it does not change anything for the backtrace.
Regards
Uwe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
Package: zabbix-server-mysql
Version: 1:1.1.4-10
Severity: normal
The zabbix server start/stop script does not stop a running zabbix server:
# /etc/init.d/zabbix-server stop
Stopping Zabbix server: zabbix_server
No /usr/sbin/zabbix_server found running; none killed.
# ps ax|grep zabbix
Package: zabbix-frontend-php
Version: 1:1.1.4-10
Severity: important
After the installation of zabbix I could not access the zabbix frontend
to configure it:
URL: http://localhost/zabbix/
Fatal error: Call to undefined function mysql_pconnect() in
/usr/share/zabbix/include/db.inc.php on
PS: I can easily reproduce this state by restarting the service a few
times in a row (with /etc/init.d/zabbix-server restart).
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: liferea
Version: 1.0.27-2
Severity: wishlist
Please change the font in the rendering window back to Sans Serif
(or make it at least configurable). The new font is hard to read.
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (750, 'testing'), (650,
Package: liferea
Version: 1.0.27-2
Severity: normal
For some feeds (e.g. Linux.com) a fallback image is shown in the render
window as it is shown in a browser when the original image cannot be
found.
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (750,
Package: openbsd-inetd
Version: 0.20050402-5
Followup-For: Bug #386469
This bug is not fixed, I just got it on two different machines during
an upgrade:
Setting up openbsd-inetd (0.20050402-5) ...
Installing new version of config file /etc/init.d/openbsd-inetd ...
Starting internet superserver:
Package: apt-listbugs
Version: 0.0.73
Hi Junichi,
this bug is still not fixed:
# apt-listbugs list apt-listbugs
Reading package fields... Donenment variable http_proxy is set and
soap_use_proxy is not 'on'.
Reading package status... Done
Retrieving bug reports... 0% Fail
Error retrieving bug
Package: xmms
Version: 1:1.2.10+20061101-1
Severity: normal
xmms crashes if you try to configure the libdbmix plugin.
Once xmms did not crash and opened the configuration mask
of the libdbmix plugin. It looked like the Channel Name
is not initialized properly, a lot of arbitrary characters
were
Hi Tomas
So please Kent, Ben, Leonardo, Norman, Mind Booster, Daniel, Uwe, Mike an
Luke - could you tell us from which openbsd-inetd (or xinetd or
netkit-inetd) you were upgrading from?
I also was upgrading from openbsd-inetd version 0.20050402-4.
But downgrading and upgrading again does
Hi Drew,
I assume the X11R7 transition is finished now :).
Unfortunatly I still have the problem with the printers in mozilla.
XPSERVERLIST is not automatically set in my environment probably
because I start the X-server with startx and not with gdm. But I
explicitly set XPSERVERLIST to :64 in
Hi,
the apt-listchanges package was only an example. I know that in the
testing distribution things are sometimes broken and packages are
missing. That's why I would like to have an easy way to upgrade all
packages which do not require the removal of other (application)
packages.
apt-gtet
Package: module-init-tools
Version: 3.3-pre3-1
Severity: normal
The pidentd package needs an entry for net-pf-16-proto-4 in the alias
list. Otherwise it throws the following error:
identd[21897]: netlink_lookup: write failed: Connection refused
The entry:
alias net-pf-16-proto-4 inet_diag
The entry better should be:
alias net-pf-16-proto-4 tcp_diag
With inet_diag the pidentd error message is gone, but
to resolve the username pidentd also needs the module
tcp_diag.
Regards,
Uwe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact
Package: munin-node
Version: 1.2.3-1
Severity: normal
The plugin fw_forwarded_local returns no data because it has no
permission to read /proc/net/ip_conntrack. Adding the following
entry to /etc/munin/plugin-conf.d/munin-node fixes the problem
for me:
[fw_forwarded_local]
user root
This bug
Package: munin-node
Version: 1.2.3-1
Severity: minor
The auto configuration of the postfix_mailvolume plugin fails although
postfix is installed:
# /usr/share/munin/plugins/postfix_mailvolume autoconf
no (postfix not found)
# which postconf
/usr/sbin/postconf
The problem is the wrong check of
Package: munin-node
Version: 1.2.5-1
Severity: normal
The mysql plugins don't get any data:
$ telnet localhost 4949
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
# munin node at grappa.ibr.ch
list
open_inodes mysql_slowqueries irqstats apache_accesses if_eth0 squid_cache
Hi Junichi
BTW: A somewhat consistent handling of the proxy usage within
the apt family would not be bad ;-).
proxy configuration is set in /etc/apt/apt.conf.d/XXX. It should be
consistent with APT.
If there really would be a need for a security check (an admin should
know what he is
On Nov 22, Junichi Uekawa wrote:
reassign 399706 libruby1.8
There are now 3 bugs (399706, 396304 and 389681) about the proxy
handling of apt-listbugs and I'm not convinced that this is really
a ruby problem.
The sanity check with SOAP_USE_PROXY may be required in other
contexts where this ruby
Hi Drew
Uwe, you could install firefox for comparison (which still uses
xprint).
Printing with firefox still works (if XPSERVERLIST is set, as I wrote
in my last mail). But unfortunatly printing with firefox is buggy (only
the first print job is ok, afterwards the page header and footer are
But I don't worry to set XPSERVERLIST manually, if that's enough to
make printing from firefox work.
I have rechecked that now. Looks like one of the X11 upgrades has
solved this problem. I don't have to set XPSERVERLIST in my user
environment anymore, it is set automatically.
So for firefox
Package: ftm
Version: 0.0.8
Severity: normal
Why does ftm depend on a development version of a library?
# dpkg -s ftm
Package: ftm
Version: 0.0.8
Depends: libabz0 (= 0.6.2), libc6 (= 2.3.6-6), libdebug0 (= 0.4.2),
libncurses5 (= 5.4-5), libabz0-dev (= 0.7.2)
Also depending on different
Package: hotplug
Version: 0.0.20040329-22
Severity: important
This is my third system where hotplug breaks a lot of things after
upgrading to sarge / kernel 2.4 (graphic, sound, network cards).
The problem is the coldplug mechanism which loads a lot of unnecessary
and partly wrong modules. Even
On Jul 18, Marco d'Itri wrote:
Sorry, you are very confused. Coldplugging has nothing to do with
kerneld, and hotplug just uses modprobe.
I know hotplug uses modprobe. And, sorry, it's not kerneld anymore,
it's the kernel module loader now, which also uses modprobe to load
modules. Both
Package: kernel-patch-freeswan
Version: 2.04-11.3
Severity: important
I have patched my kernel with kernel-patch-freeswan. IPsec tunnel is
running fine but a few minutes after boot I get the following kernel
error:
Jul 19 03:10:05 c1 snmpd[1272]: Connection from 127.0.0.1
Jul 19 03:10:05 c1
As an additional information: This problem does not occur with the plain
freeswan-2.0.6 patch (and tools). So it could be an effect of the
additional debian patches.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: xvncviewer
Version: 3.3.7-7
Followup-For: Bug #146313
Still broken in sarge (with fvwm here).
But F8 works in fullscreen mode for xtightvncviewer and xvnc4viewer.
Perhaps a look at their code base may help.
Uwe
-- System Information:
Debian Release: 3.1
APT prefers testing
APT
The logcheck rule for ntpdate also does not match any longer (at least
for version ntpdate 1:4.2.0a+stable-2, delivered with sarge).
logcheck rule in /etc/logcheck/ignore.d.server/ntpdate:
ntpdate\[[0-9]+\]: adjust time server .* offset
ntpdate log message:
Jul 4 18:58:07 c2
Package: mrtg-ping-probe
Version: 2.1.0-1
Severity: important
The ping program from the netkit-ping package requires root permissions
for option -s:
$ /bin/ping -s 56 -c 10 127.0.0.1
ping: Operation not permitted
So either the option -s should be removed for Debian or better you
make the
Package: xbase-clients
Version: 4.3.0.dfsg.1-14
Severity: normal
Switching autorepeat off for all keys and allowing it for a single key
does not work.
Switching autorepeat on for all keys but space does work as expected:
$ xset r
$ xset -r 65
But:
$ xset -r
$ xset r 65
does not work. I get
Package: munin-node
Version: 1.2.5-1
Severity: wishlist
Hello,
the graph for the fw_conntrack plugin is a stacked graph and it looks
somewhat strange when the bottom part of the scale with the established
connections mostly is missing. Please add 'graph_args -l 0' to the config
section of the
On Apr 11, Shaun Jackman wrote:
I can confirm this bug exists. Although, I'm not sure what's causing
it. freeguide 0.10.1-1 worked for me before. Did it ever work for you?
No, the behaviour was just after the upgrade from 0.8.6 to 0.10.1.
0.8.6 worked before and works now, but 0.10.1 never
On Apr 12, Andy Balaam wrote:
Sometimes in 0.10.1/2 your grabber information gets lost. It might be
worth Looking under Options, Advanced, Grabbers and making sure XMLTV
is checked, and then looking under XMLTV to see whether you have any
grabbers defined. If not, re-running the First
Package: rsh-redone-client
Version: 78-1
Severity: important
Instead of login to the remote host rsh exits without any error or
warning message and you are back in the shell you started it. With
option -v it even claims to be connected to the remote host:
$ uname -n
grappa
$
If I remove the .rhosts file on the target system I get at least an
error message but I'm still on the local machine:
$ /usr/bin/rsh-redone-rsh -v cabernet
Trying 172.16.8.10 port 514... Connected.
/usr/bin/rsh-redone-rsh: Didn't receive NULL byte from server: Success
--
To UNSUBSCRIBE, email
On Apr 19, Guus Sliepen wrote:
You probably want to use rlogin instead of rsh. What netkit-rsh does is
that if you omit a command to execute on the remote host, it actually
starts netkit-rlogin. Rsh-redone just executes your empty command and
immediately exits. This is not a bug, just a
Package: galeon
Version: 1.3.19-1
Severity: normal
Hi,
there are two meta commands for calling a (generic) web browser:
/usr/bin/x-www-browser
/usr/bin/www-browser
I assume x-www-browser is meant for a web browser running in an X
environment and www-browser is meant for running without X.
Package: xlockmore
Version: 1:5.21-3
Severity: wishlist
I haven't found any way to disable the new public logout button,
neither by setting logoutButton to zero or to an high value nor
by setting logoutCmd to an empty string.
I used to use xlock to protect my X session, but now everybody can
On May 04, Michael Stone wrote:
Setting where?
I have tried it with command line options which usually oversteer
the default settings.
It's not new; it's been there for more than 5 years.
At least it wasn't there with out of the box settings in sarge and
also in etch before my last update.
Are you still seeing this bug with recent versions of FreeGuide? Does
Andy's suggestion help?
Sorry for the delay. Yes, Andy's suggestion seems to work, at least for
version 0.8.5 and 0.8.6.
Thanks,
Uwe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
Package: postfix
Version: 2.2.9-1
Severity: minor
postfix does not remember the setting for the internet protocol if I
reconfigure the package.
dpkg-reconfigure remembers all settings from a previous configuration
run but not the value for the internet protocols to use. The value for
the internet
Package: postfix
Version: 2.2.9-1
Severity: normal
postfix ignores alias for root user if it is configured as a satellite system.
Mail for root always will be forwarded to the relay host with destination
address [EMAIL PROTECTED]
From the config page:
Satellite system - All mail is sent to
On Mar 27, LaMont Jones wrote:
What are the values for mydestination and myorigin in
/etc/postfix/main.cf (or whatever is referenced)
mydestination = grappa.ibr.ch, localhost.ibr.ch, localhost
myorigin = /etc/mailname = ibr.ch
Uwe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
On Mar 28, LaMont Jones wrote:
The choices are to either add ibr.ch to $mydestination (probably not
what you want to do), or use a virtual map to redirect [EMAIL PROTECTED] to
your preferred destination.
Of course I can tweak the postfix configuration to do this.
But that's not the point.
Package: cacti
Version: 0.8.6h-2
Severity: grave
Justification: renders package unusable
cacti does not collect any data, not even for the predefined localhost.
The problem seems to be a missing function in the data collector script,
maybe a missing dependency:
# su www-data
$
Installing php5-mysql fixes the problem.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hi Sean
On Mar 30, sean finney wrote:
$ /usr/share/cacti/site/poller.php
this is probably because your web server was not configured for
php4-mysql even though it was installed. you need to have one
of php4-mysql and php5-mysql installed, and cacti depends on
having one or the other.
I'm
Package: freeguide
Version: 0.10.1-1
Severity: important
After the upgrade to version 0.10.1-1 freeguide asked for a download
of program data at the first start. After a while the download window
disappeared as usual (without an error message), but freeguide does
not display any program data.
Hi Drew,
sorry for the delay, I was on vacation. Meanwhile I have dropped the
system completely, it was screwed-up too much :(. I'm glad it was not
my main system ...
I also got problems on my main system today where I have all Xorg
packages on hold, i.e. pinned to 6.9. But xprint got upgraded.
Package: xprint
Version: 1:1.0.2-1
Severity: important
After upgrading xprint from version 1:0.1.0.alpha1-13 to 1:1.0.2-1 all
printer entries in mozilla (lp@:64, ..) are gone.
mozilla-browser is version 2:1.7.12-1.1.
After downgrading xprint to 1:0.1.0.alpha1-13 they are back again.
Regards,
On Jun 08, Drew Parsons wrote:
Can you check a few things?
I have to say I don't know much about xprint, the somewhat strange
printer names (...@:64) magically appeared in mozilla and printing
simply works, up to now ...
- is XPSERVERLIST still defined? (check with echo $XPSERVERLIST for
On Jun 09, Drew Parsons wrote:
Yes, in the user environment. It should have be set for the old
package, it's automatically set
in /etc/X11/Xsession.d/92xprint-xpserverlist when X is started by gdm or
suchlike. How are you starting X? Maybe your setup has been bypassing
it?
That's
Package: munin-node
Version: 1.2.4-1
Severity: important
/etc/init.d/munin-node start never returns and makes the system hang
on boot. I can reproduce the effect if I call it from the command line.
It hangs in a read pid command. I'm not sure if this is a bug of the
munin-node init script itself
Package: slidentd
Version: 1.0.0-3
Severity: normal
slidentd does not remove it's entry in /etc/inetd.conf if you remove
the package (even with purge). It leaves the following entry in
inetd.conf:
ident stream tcp nowait.60 slidentd/usr/sbin/slidentd slidentd
Uwe
-- System
Package: nvidia-glx
Version: 1.0.7174-3
Followup-For: Bug #283352
Please reopen this bug. I have the same problem with the current package
in stable:
# dpkg -P nvidia-glx
(Reading database ... 134929 files and directories currently installed.)
Removing nvidia-glx ...
dpkg-divert: rename involves
Hi,
how is this option named and where is it documented?
I could not find it in apt version 0.6.44.1, neither in the output
of apt-get -h nor in the manpages of apt, apt-get and apt.conf.
Regards,
Uwe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
Hi,
I don't know why there has to be a package linux-image-2.6.16-1 and
linux-image-2.6.16-2. But if it has to be the nvidia-kernel package
should follow this numbering. Otherwise the nvidia modules will be
installed in a different directory and not be found.
Additionally the nvidia-kernel
Package: xterm
Version: 210-2
Severity: normal
The option -sl has no effect, the size of the scroll buffer remains
unchanged at the value given by the ressources (saveLines).
Regards,
Uwe
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (750,
Package: xfonts-base
Version: 1:1.0.0-3
Severity: important
The installation of this package breaks the xserver-xorg 6.9
(Fatal server error: could not open default font 'fixed').
This happens on an apt-get update. The font packages get updated,
but the server does not get updated because of
Package: xserver-xorg
Version: 7.0.20
Severity: normal
Purging the xserver-xorg package does not remove the config file:
# dpkg -P xserver-xorg
(Reading database ... 152882 files and directories currently installed.)
Removing xserver-xorg ...
Purging configuration files for xserver-xorg ...
But
Package: xserver-xorg
Version: 1:7.0.20
Severity: important
xserver-xorg persists in using the wrong old XFree86 debconf values.
I have removed all XFree86 config files, even the backups, have
reinstalled the xserver-xorg package, removed the xorg.conf file and
have reconfigured the package.
Hello Michael,
as I already wrote in my last message I have found an option to
disable the logout button (-logoutButton -1), although this
possibility is NOT documented in the manpage. Perhaps the title
of this bug report should be changed.
On May 12, Michael Stone wrote:
I'll repeat: nothing
On May 17, Michael Stone wrote:
Are you running the broken version of kdm in testing that has the wrong
PATH and doesn't parse xresources properly?
No. I'm running fvwm here.
But the pure X server without a windowmanager or any other X client
(started with: X; export DISPLAY=:0; xlock -mode
Package: xmltv-util
Version: 0.5.39-2
Severity: important
tv_grab_de_tvtoday gets no data and aborts with an error message:
$ tv_grab_de_tvtoday --config-file /tmp/tv_grab_de_tvtoday.conf --offset 0
--days 1 --output /tmp/tv-20060721.xmltv
getting list of channels:
Package: xmltv-util
Version: 0.5.44-1
Severity: important
xmltv-util requires version 0.6 of XML::Writer.
This is the output of freeguide, but the problem seems to be
related to xmltv-util:
$tv_grab_de_tvtoday --config-file /home/uwe/.xmltv/tv_grab_de_tvtoday.conf
--offset 0 --days 1 --output
On Jul 21, Chris Butler wrote:
This is due to website changes. It has been fixed in later versions of
xmltv. Unfortunately, the fix will not make it into the official 'sarge'
release.
That's why I used the xmltv version from testing on stable. But this
seems not to work anymore because of
Package: vnc4server
Version: 4.1.1+X4.3.0-10
Severity: minor
The Binaries in this package are not stripped. Example:
$ file /usr/bin/Xvnc4
/usr/bin/Xvnc4: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), for
GNU/Linux 2.4.1, dynamically linked (uses shared libs), for GNU/Linux
Package: ekg2
Version: 20060210+1832-1
Severity: minor
The ekg2 binary is not stripped, also all the plugins (*.so):
$ file /usr/bin/ekg2
/usr/bin/ekg2: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), for
GNU/Linux 2.2.0, dynamically linked (uses shared libs), for GNU/Linux 2.2.0,
Package: apt-file
Version: 2.0.7
Severity: normal
apt-file should give an error message and not fail silently if no
direct http-connection is available, e.g. if a proxy is required.
Also it should read the proxy settings from apt.conf as already
requested in bug 350716.
# apt-file --verbose
Package: collectd
Version: 3.10.4-1
Severity: normal
collectd does not create any apache statistics and spams the syslog
with the error message:
collectd[7855]: apache: curl_easy_perform failed: Failed writing body
The collectd config contains the ?auto suffix in the URL:
LoadPlugin apache
Hi Sebastian,
thanks for your explanation.
You can try to decrease the size of that file by decreasing the
MaxClients setting of your MPM (most probably apache2-mpm-prefork or
apache2-mpm-worker).
It's apache 1.3 with a standard debian configuration (upgraded from
sarge). So I thought it's
Package: linux-image-2.6-486
Severity: important
I'm not sure if this is the right package to file the report against.
But as this package probably should have been installed during the
upgrade I chose it. Be free to reassign the report.
This system had installed an up-to-date version of sarge
Package: squid
Version: 2.6.5-6etch1
Severity: normal
squid stops to create an access.log file after upgrading from sarge to
etch without any warning.
The upgrade script should warn you about the changed behaviour or even
better ask to automatically add an access log entry if no explicit entry
Same behaviour here, bindgraph stopped displaying any graphs after
the upgrade from sarge to etch.
Thanks for the patch, it works for me too.
Uwe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
severity 432404 grave
quit
Since the purpose of this package is to display bind usage graphs
not displaying any graphs in the web page makes the whole package
unusable. So 'grave' was the correct severity.
Uwe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe.
1 - 100 of 241 matches
Mail list logo
