Bug#1056778: gnome-shell: Leaks memory using Wayland

[Adrian Immanuel Kiess]

Package: gnome-shell
Version: 44.5-2
Severity: normal

Dear Maintainer,

   * What led up to the situation?
 Upgrading gnome-shell on Debian/testing
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 apt -u dist-upgrade
   * What was the outcome of this action?
 gnome-shell process leaks memory on Debian/testing
   * What outcome did you expect instead?
 gnome-shell process not leaking memory

currently, since a while, the gnome-shell process leaks memory using gnome
shell with Wayland. I am using gnome-shell as Wayland process, and under
current Debian/testing environment, the process leaks memory and can get
several gigabyte large.

Output from 'top':

14237 adrian20   0 9525320   1,3g 764448 S  15,9   8,6  35:33.41 gnome-
shell

As you can see in above example, the gnome-shell process uses 1,3GB random
access memory. Please bear in mind, that several gigabyte of memory usage are
already swapped out to the Linux swap partition.

% grep --color VmSwap /proc/14237/status
VmSwap:  2938064 kB

As in above example, ~3 gigabyte of memory are swapped out.

In conjunction with above recognition, the gnome shell (user interface)
'freezes' several seconds, from time to time.

Thank you very much for your kind attention,

Adrian Kieß


-- System Information:
Debian Release: trixie/sid
  APT prefers testing
  APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 6.5.0-4-amd64 (SMP w/4 CPU threads; PREEMPT)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) (ignored: LC_ALL 
set to fr_FR.UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages gnome-shell depends on:
ii  dconf-gsettings-backend [gsettings-backend]  0.40.0-4
ii  gconf-gsettings-backend [gsettings-backend]  3.2.6-8
ii  gir1.2-accountsservice-1.0   23.13.9-4
ii  gir1.2-adw-1 1.4.0-2
ii  gir1.2-atk-1.0   2.50.0-1
ii  gir1.2-atspi-2.0 2.50.0-1
ii  gir1.2-freedesktop   1.78.1-5
ii  gir1.2-gcr-3 3.41.1-3
ii  gir1.2-gdesktopenums-3.0 45.0-2
ii  gir1.2-gdkpixbuf-2.0 2.42.10+dfsg-3
ii  gir1.2-gdm-1.0   45.0.1-1
ii  gir1.2-geoclue-2.0   2.7.1-1
ii  gir1.2-glib-2.0  1.78.1-5
ii  gir1.2-gnomebg-4.0   44.0-2
ii  gir1.2-gnomebluetooth-3.042.6-1
ii  gir1.2-gnomedesktop-4.0  44.0-2
ii  gir1.2-graphene-1.0  1.10.8-2
ii  gir1.2-gstreamer-1.0 1.22.6-1
ii  gir1.2-gtk-4.0   4.12.3+ds-2
ii  gir1.2-gweather-4.0  4.4.0-1
ii  gir1.2-ibus-1.0  1.5.29~rc2-1
ii  gir1.2-mutter-12 44.5-2
ii  gir1.2-nm-1.01.44.2-3
ii  gir1.2-nma4-1.0  1.10.6-1
ii  gir1.2-pango-1.0 1.51.0+ds-3
ii  gir1.2-polkit-1.0123-3
ii  gir1.2-rsvg-2.0  2.54.7+dfsg-2
ii  gir1.2-soup-3.0  3.4.4-2
ii  gir1.2-upowerglib-1.01.90.2-6
ii  gir1.2-webkit2-4.1   2.42.2-1
ii  gnome-backgrounds45.0-1
ii  gnome-settings-daemon45.0-1
ii  gnome-shell-common   44.5-2
ii  gsettings-desktop-schemas45.0-2
ii  gstreamer1.0-pipewire0.3.85-1
ii  libatk-bridge2.0-0   2.50.0-1
ii  libatk1.0-0  2.50.0-1
ii  libc62.37-12
ii  libcairo21.18.0-1
ii  libecal-2.0-23.50.1-1
ii  libedataserver-1.2-273.50.1-1
ii  libgcr-base-3-1  3.41.1-3
ii  libgdk-pixbuf-2.0-0  2.42.10+dfsg-3
ii  libgirepository-1.0-11.78.1-5
ii  libgjs0g 1.78.0-1
ii  libgles2 1.7.0-1
ii  libglib2.0-0 2.78.1-4
ii  libglib2.0-bin   2.78.1-4
ii  libgnome-autoar-0-0  0.4.4-2
ii  libgnome-desktop-4-2 44.0-2
ii  libgraphene-1.0-01.10.8-2
ii  libgtk-3-0   3.24.38-6
ii  libgtk-4-1   4.12.3+ds-2
ii  libical3 3.0.17-1
ii  libjson-glib-1.0-0   1.8.0-2
ii  libmutter-12-0

Bug#1020943: nscd: Segmention fault when trying to launch on Debian/testing

[Adrian Immanuel Kiess]

Package: nscd
Version: 2.35-1
Severity: normal

Dear Maintainer,

   * What led up to the situation?
 Upgrading nscd on Debian/testing
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 apt -u dist-upgrade
   * What was the outcome of this action?
 nscd segfaults when trying to launch
   * What outcome did you expect instead?
 Working nscd

currently on Debian/testing, nscd crashes when trying to launch.

>From logwatch:

 WARNING:  Segmentation Faults in these executables
nscd :  2461 Time(s)

Here is the journalctl output:

sept. 29 09:12:13 g6.lan.dac systemd[1]: Started Name Service Cache Daemon.
sept. 29 09:12:15 g6.lan.dac systemd[1]: nscd.service: Main process exited,
code=killed, status=11/SEGV
sept. 29 09:12:15 g6.lan.dac systemd[1]: nscd.service: Failed with result
'signal'.
sept. 29 09:12:15 g6.lan.dac systemd[1]: nscd.service: Scheduled restart job,
restart counter is at 1.
sept. 29 09:12:15 g6.lan.dac systemd[1]: Stopped Name Service Cache Daemon.
sept. 29 09:12:15 g6.lan.dac systemd[1]: Starting Name Service Cache Daemon...
sept. 29 09:12:15 g6.lan.dac nscd[3569]: 3569 monitoring file `/etc/passwd` (1)
sept. 29 09:12:15 g6.lan.dac nscd[3569]: 3569 monitoring directory `/etc` (2)
sept. 29 09:12:15 g6.lan.dac nscd[3569]: 3569 monitoring file `/etc/group` (3)
sept. 29 09:12:15 g6.lan.dac nscd[3569]: 3569 monitoring directory `/etc` (2)
sept. 29 09:12:15 g6.lan.dac nscd[3569]: 3569 monitoring file `/etc/hosts` (4)
sept. 29 09:12:15 g6.lan.dac nscd[3569]: 3569 monitoring directory `/etc` (2)
sept. 29 09:12:15 g6.lan.dac nscd[3569]: 3569 monitoring file
`/etc/resolv.conf` (5)
sept. 29 09:12:15 g6.lan.dac nscd[3569]: 3569 monitoring directory `/etc` (2)
sept. 29 09:12:15 g6.lan.dac nscd[3569]: 3569 monitoring file `/etc/services`
(6)
sept. 29 09:12:15 g6.lan.dac nscd[3569]: 3569 monitoring directory `/etc` (2)
sept. 29 09:12:15 g6.lan.dac nscd[3569]: 3569 disabled inotify-based monitoring
for file `/etc/netgroup': No such file or directory
sept. 29 09:12:15 g6.lan.dac nscd[3569]: 3569 stat failed for file
`/etc/netgroup'; will try again later: No such file or directory
sept. 29 09:12:15 g6.lan.dac nscd[3569]: 3569 monitoring file
`/etc/nsswitch.conf` (7)
sept. 29 09:12:15 g6.lan.dac nscd[3569]: 3569 monitoring directory `/etc` (2)
sept. 29 09:12:15 g6.lan.dac nscd[3569]: 3569 monitoring file
`/etc/nsswitch.conf` (7)
sept. 29 09:12:15 g6.lan.dac nscd[3569]: 3569 monitoring directory `/etc` (2)
sept. 29 09:12:15 g6.lan.dac nscd[3569]: 3569 monitoring file
`/etc/nsswitch.conf` (7)
sept. 29 09:12:15 g6.lan.dac nscd[3569]: 3569 monitoring directory `/etc` (2)
sept. 29 09:12:15 g6.lan.dac nscd[3569]: 3569 monitoring file
`/etc/nsswitch.conf` (7)
sept. 29 09:12:15 g6.lan.dac nscd[3569]: 3569 monitoring directory `/etc` (2)
sept. 29 09:12:15 g6.lan.dac nscd[3569]: 3569 monitoring file
`/etc/nsswitch.conf` (7)
sept. 29 09:12:15 g6.lan.dac nscd[3569]: 3569 monitoring directory `/etc` (2)
sept. 29 09:12:15 g6.lan.dac systemd[1]: Started Name Service Cache Daemon.
sept. 29 09:12:16 g6.lan.dac systemd[1]: nscd.service: Main process exited,
code=killed, status=11/SEGV
sept. 29 09:12:16 g6.lan.dac systemd[1]: nscd.service: Failed with result
'signal'.
sept. 29 09:12:16 g6.lan.dac systemd[1]: nscd.service: Scheduled restart job,
restart counter is at 2.
sept. 29 09:12:16 g6.lan.dac systemd[1]: Stopped Name Service Cache Daemon.
sept. 29 09:12:16 g6.lan.dac systemd[1]: nscd.service: Start request repeated
too quickly.
sept. 29 09:12:16 g6.lan.dac systemd[1]: nscd.service: Failed with result
'signal'.
sept. 29 09:12:16 g6.lan.dac systemd[1]: Failed to start Name Service Cache
Daemon.

Thank you very much for your attention.

Sincerely,

Adrian Kiess


-- System Information:
Debian Release: bookworm/sid
  APT prefers testing
  APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 5.19.0-1-amd64 (SMP w/4 CPU threads; PREEMPT)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages nscd depends on:
ii  init-system-helpers1.65.2
ii  libaudit1  1:3.0.7-1.1
ii  libc6  2.35-1
ii  libcap21:2.44-1
ii  libselinux13.4-1+b2
ii  lsb-base   11.4
ii  sysvinit-utils [lsb-base]  3.05-6

nscd recommends no packages.

nscd suggests no packages.

-- no debconf information

Bug#1019343: munin-graph uses deprecated Date::Manip:DM5, spams due to cron

[Adrian Immanuel Kiess]

Package: munin
Version: 2.0.69-1
Followup-For: Bug #1019343

Dear Maintainer,

I experience the same bug, since last upgrade of Munin on my local machine for
the local network, and on the Munin server on one of my virtual private
servers.

Both of these run Debian/testing.

The E-Mail which I am getting all 5 minutes, twice, because of two instances I
have running, is the following:

From: adr...@mx.aik.onl (Cron Daemon)
To: r...@mx.aik.onl
Subject: Cron  if [ -x /usr/bin/munin-cron ]; then /usr/bin/munin-
cron; fi
Date: Tue, 20 Sep 2022 16:47:18 +0200

Date::Manip::DM5 is deprecated and will be removed from the Date::Manip package
starting in version 7.00 at (eval 5) line 1.

Thank you for working on this bug already.

With many greetings from Leipzig, Germany.

Sincerely,

Adrian Kiess


-- System Information:
Debian Release: bookworm/sid
  APT prefers testing
  APT policy: (990, 'testing')
merged-usr: no
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 5.19.0-1-amd64 (SMP w/4 CPU threads; PREEMPT)
Kernel taint flags: TAINT_WARN
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages munin depends on:
ii  cron [cron-daemon]   3.0pl1-149
ii  debconf [debconf-2.0]1.5.79
ii  fonts-dejavu-core2.37-2
ii  init-system-helpers  1.64
ii  libdate-manip-perl   6.89-1
pn  libdigest-md5-perl   
ii  libfile-copy-recursive-perl  0.45-2
ii  libhtml-template-perl2.97-2
ii  libio-socket-inet6-perl  2.73-1
ii  liblog-log4perl-perl 1.55-1
ii  librrds-perl 1.7.2-4+b3
pn  libstorable-perl 
ii  liburi-perl  5.12-1
ii  lsb-base 11.2
ii  munin-common 2.0.69-1
ii  netbase  6.3
ii  perl [libtime-hires-perl]5.34.0-5
ii  rrdtool  1.7.2-4+b3
ii  systemd-sysv 251.4-3

Versions of packages munin recommends:
ii  libcgi-fast-perl  1:2.15-1
ii  munin-doc 2.0.69-1
ii  munin-node2.0.69-1

Versions of packages munin suggests:
ii  apache2 [httpd] 2.4.54-2
ii  chromium [www-browser]  105.0.5195.125-1
ii  dillo [www-browser] 3.0.5-7+b1
ii  elinks [www-browser]0.13.2-1+b3
ii  epiphany-browser [www-browser]  42.4-1
ii  firefox-esr [www-browser]   102.2.0esr-1
ii  konqueror [www-browser] 4:21.12.3-1
ii  libapache2-mod-fcgid1:2.3.9-4
ii  libnet-ssleay-perl  1.92-2
ii  links2 [www-browser]2.27-1+b1
ii  lynx [www-browser]  2.9.0dev.10-1+b1
ii  netsurf-gtk [www-browser]   3.10-1+b3
ii  w3m [www-browser]   0.5.3+git20220429-1+b1

-- Configuration Files:
/etc/munin/apache.conf changed:
Alias /munin /var/cache/munin/www
Alias /munin-cgi/static /var/cache/munin/www/static
ScriptAlias /munin-cgi /usr/lib/cgi-bin/munin-cgi-html

Order allow,deny
Allow from 192.168.0.0/24 localhost 127.0.0.0/8 ::1
Options None
# This file can be used as a .htaccess file, or a part of your apache
# config file.
#
# For the .htaccess file option to work the munin www directory
# (/var/cache/munin/www) must have "AllowOverride all" or something 
# close to that set.
#
# AuthUserFile /etc/munin/munin-htpasswd
# AuthName "Munin"
# AuthType Basic
# require valid-user
# This next part requires mod_expires to be enabled.
#

# Set the default expiration time for files to 5 minutes 10 seconds from
# their creation (modification) time.  There are probably new files by
# that time. 
#

ExpiresActive On
ExpiresDefault M310

 

/etc/munin/apache24.conf changed:
ScriptAlias /munin-cgi/munin-cgi-graph /usr/lib/munin/cgi/munin-cgi-graph
Alias /munin/static/ /var/cache/munin/www/static/

#Require local
Require all granted
Options None


#Require local
Require all granted

SetHandler fcgid-script


SetHandler cgi-script


Alias /munin /var/cache/munin/www

/etc/munin/munin.conf changed:
includedir /etc/munin/munin-conf.d
timeout_fetch_all_nodes 240
timeout_fetch_one_node 180
[g6.lan.dac]
   address localhost
   use_node_name yes
[tdz2000.lan.dac]
address tdz2000.lan.dac
use_node_name yes
[m2n.lan.dac]
address m2n.lan.dac
use_node_name yes


-- debconf information:
  munin/postrm_remove_rrd_files: false

Bug#1019554: anacron: Anacron no longer seems to execute jobs

[Adrian Immanuel Kiess]

Package: anacron
Version: 2.3-34
Followup-For: Bug #1019554

Dear Maintainer,

I experience the same bug after the last upgrade.

Anacron does no longer execute jobs on both of my Debian/testing installations.

Reading the already happened conversation, I now started anacron manually with:

# service anacron start

The anacron service now runs again; checked with:

# ps auxwww
root  249421  0.0  0.0  14480  1060 ?Ss   08:03   0:00
/usr/sbin/anacron -d -q -s

I will now wait, if anacron executes jobs again and for an upgraded package
which will fix the bug.

Thank you very much.

Sincerely,

Adrian Kiess


-- System Information:
Debian Release: bookworm/sid
  APT prefers testing
  APT policy: (990, 'testing')
merged-usr: no
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 5.19.0-1-amd64 (SMP w/4 CPU threads; PREEMPT)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages anacron depends on:
ii  libc6 2.34-7
ii  lsb-base  11.2

Versions of packages anacron recommends:
ii  cron [cron-daemon]  3.0pl1-149

Versions of packages anacron suggests:
ii  exim4-daemon-heavy [mail-transport-agent]  4.96-3
ii  powermgmt-base 1.37
ii  rsyslog [system-log-daemon]8.2208.0-1

-- Configuration Files:
/etc/cron.d/anacron changed:
SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
30 21 * * *   root  [ -x /etc/init.d/anacron ] && if [ ! -d 
/run/systemd/system ]; then /usr/sbin/invoke-rc.d anacron start >/dev/null; fi


-- no debconf information

Bug#1016637: evolution: spool+smtp account — E-mails are marked always as new

[Adrian Immanuel Kiess]

Package: evolution
Version: 3.44.3-2
Severity: normal

Dear Maintainer,

   * What led up to the situation?
 Upgrading evolution a year ago
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 apt-get dist-upgrade
   * What was the outcome of this action?
 New messages in a local spool+smtp account are always marked as new,
clicking them marks then as read for some seconds — afterwards the message is
marked as new again
   * What outcome did you expect instead?
 Ability to mark messages on the spool directory as read

in Debian/testing, Evolution is unable to write access the spool directory and
mark read messages as "read". Clicking a message marks this message as "read"
for some seconds, afterwards the message status returns to "new". I assume,
this is, because of Evolution can't write to the spool directory of mails.

My mail spool directory permissions are set to the Debian defaults, and
Sylpheed can access the spool directory for writing. Sylpheed works fine with
my settings and mail spool permissions.

Thank you very much for your kind attention.

With many greetings,

Adrian Kieß



-- System Information:
Debian Release: bookworm/sid
  APT prefers testing
  APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 5.18.0-3-amd64 (SMP w/4 CPU threads; PREEMPT)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages evolution depends on:
ii  dbus   1.14.0-2
ii  evolution-common   3.44.3-2
ii  evolution-data-server  3.44.3-2
ii  libc6  2.33-8
ii  libcamel-1.2-633.44.3-2
ii  libclutter-gtk-1.0-0   1.8.4-4+b1
ii  libecal-2.0-1  3.44.3-2
ii  libedataserver-1.2-26  3.44.3-2
ii  libevolution   3.44.3-2
ii  libglib2.0-0   2.72.3-1
ii  libgtk-3-0 3.24.34-1
ii  libical3   3.0.14-1+b1
ii  libnotify4 0.8.1-1
ii  libsoup2.4-1   2.74.2-3
ii  libxml22.9.14+dfsg-1+b1
ii  psmisc 23.5-3

Versions of packages evolution recommends:
ii  evolution-plugin-bogofilter  3.44.3-2
ii  evolution-plugin-pstimport   3.44.3-2
ii  evolution-plugins3.44.3-2
ii  yelp 42.1-2

Versions of packages evolution suggests:
pn  evolution-ews   
ii  evolution-plugins-experimental  3.44.3-2
ii  gnupg   2.2.35-3
pn  network-manager 

-- debconf information:
  evolution/kill_processes:
  evolution/needs_shutdown:

Bug#1013260: coreutils: /bin/chown very slow in conjunction with storebackup

[Adrian Immanuel Kiess]

Package: coreutils
Version: 8.32-4.1
Severity: important

Dear Maintainer,

   * What led up to the situation?
 Upgrading a month ago
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 apt -u dist-upgrade
   * What was the outcome of this action?
 storebackup fails to make a new backup, because each /bin/chown call takes
serveral seconds or seems to hang and take minutes to complete
   * What outcome did you expect instead?
 Working /bin/chown

in the current Debian/testing, storebackup fails to make a new backup, because
storebackup stalls during the backup process. From what I can see though ps
axuwww, storebackup stalls by calling /bin/chown, where every chown process
call takes seconds to minutes to complete.

Thank you in advance for your attention.

Sincerely,

Adrian Kiess


-- System Information:
Debian Release: bookworm/sid
  APT prefers testing
  APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 5.18.0-1-amd64 (SMP w/4 CPU threads; PREEMPT)
Kernel taint flags: TAINT_WARN
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages coreutils depends on:
ii  libacl1  2.3.1-1
ii  libattr1 1:2.5.1-1
ii  libc62.33-7
ii  libgmp10 2:6.2.1+dfsg1-1
ii  libselinux1  3.4-1

coreutils recommends no packages.

coreutils suggests no packages.

-- no debconf information

Bug#1012100: linux-image-5.17-1: KVM LIBVIRT fails to start, slow disk access, and a kernel thread goes wild on Intel Xeon X3430

[Adrian Immanuel Kiess]

Package: src:linux
Version: 5.17.3-1
Severity: important

Dear Maintainer,

   * What led up to the situation?
 Upgrading my Debian/testing installation with apt -u dist-upgrade
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 apt -u dist-upgrade
   * What was the outcome of this action?
 The new 5.17-1 kernel has several issues
   * What outcome did you expect instead?
 Working Linux kernel with no issues

currently in Debian/testing, the new 5.17 kernel has several issues.

My LIBVIRT KVM VM instances fail to load with this new kernel.

The disk access is slow in some programs, as for example showing the KVM VM
instances in virt-manager fails due to broken disk access.

After some hours of uptime, a kernel thread goes wild and uses 100% of the CPU.

I am also running this new kernel (5.17) on a Debian/testing VMWARE ESXI VPS
instance, at my providers place, where everything works fine. Thus this most
probably an issue with my used hardware.

My hardware is the following:

adrian@g6 ~ % inxi -F
System:
  Host: g6.lan.dac Kernel: 5.16.0-6-amd64 arch: x86_64 bits: 64
Desktop: Enlightenment v: 0.25.3 Distro: Debian GNU/Linux bookworm/sid
Machine:
  Type: Desktop System: HP product: ProLiant ML110 G6 v: N/A
serial: 
  Mobo: Wistron model: ProLiant ML110 G6 serial: 
BIOS: HP v: O27 date: 08/26/2011
CPU:
  Info: quad core model: Intel Xeon X3430 bits: 64 type: MCP cache:
L2: 1024 KiB
  Speed (MHz): avg: 1635 min/max: 1197/2394 cores: 1: 1692 2: 1617 3: 1649
4: 1585
Graphics:
  Device-1: AMD Oland GL [FirePro W2100] driver: radeon v: kernel
  Display: x11 server: X.Org v: 1.21.1.3 with: Xwayland v: 22.1.0 driver:
X: loaded: radeon gpu: radeon resolution: 1920x1200
  OpenGL: renderer: AMD OLAND (DRM 2.50.0 5.16.0-6-amd64 LLVM 13.0.1)
v: 4.5 Mesa 21.3.8
Audio:
  Device-1: AMD Oland/Hainan/Cape Verde/Pitcairn HDMI Audio [Radeon HD 7000
  Series]
driver: snd_hda_intel
  Device-2: ASUSTek Xonar U1 Audio Station type: USB
driver: hid-generic,snd-usb-audio,usbhid
  Sound Server-1: ALSA v: k5.16.0-6-amd64 running: yes
  Sound Server-2: PipeWire v: 0.3.51 running: yes
Network:
  Device-1: Broadcom NetXtreme BCM5723 Gigabit Ethernet PCIe driver: tg3
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 64:31:50:d3:c0:f8
  IF-ID-1: br0 state: up speed: 1000 Mbps duplex: unknown
mac: fe:40:ab:83:94:4a
  IF-ID-2: vnet0 state: unknown speed: 10 Mbps duplex: full
mac: fe:54:00:c2:24:94
  IF-ID-3: vnet1 state: unknown speed: 10 Mbps duplex: full
mac: fe:54:00:bf:35:8b
  IF-ID-4: vnet2 state: unknown speed: 10 Mbps duplex: full
mac: fe:54:00:25:b0:8b
  IF-ID-5: vnet3 state: unknown speed: 10 Mbps duplex: full
mac: fe:54:00:4a:c8:69
Drives:
  Local Storage: total: 11.79 TiB used: 5.87 TiB (49.8%)
  ID-1: /dev/sda vendor: Toshiba model: Q300 size: 447.13 GiB
  ID-2: /dev/sdb vendor: A-Data model: SP550 size: 447.13 GiB
  ID-3: /dev/sdc vendor: Toshiba model: HDWE140 size: 3.64 TiB
  ID-4: /dev/sdd vendor: Toshiba model: MG06ACA800E size: 7.28 TiB
Partition:
  ID-1: / size: 437.53 GiB used: 91.98 GiB (21.0%) fs: ext4 dev: /dev/sda3
  ID-2: /boot size: 1.2 GiB used: 272.2 MiB (22.2%) fs: ext4 dev: /dev/sda1
  ID-3: /home size: 3.64 TiB used: 1.76 TiB (48.4%) fs: btrfs
dev: /dev/sdc1
Swap:
  ID-1: swap-1 type: partition size: 46.66 GiB used: 139.5 MiB (0.3%)
dev: /dev/sdb2
Sensors:
  Permissions: Unable to run ipmi sensors. Root privileges required.
  System Temperatures: cpu: 49.0 C mobo: N/A gpu: radeon temp: 39.0 C
  Fan Speeds (RPM): N/A
Info:
  Processes: 410 Uptime: 1h 1m Memory: 15.62 GiB used: 9.43 GiB (60.4%)
  Shell: Zsh inxi: 3.3.16

Thank you very much, for your kind attention.

Sincerely,

Adrian Kiess


-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
sys_vendor: HP
product_name: ProLiant ML110 G6
product_version: 
chassis_vendor: HP
chassis_version: N/A
bios_vendor: HP
bios_version: O27   
board_vendor: Wistron Corporation
board_name: ProLiant ML110 G6
board_version: 

** Network interface configuration:
*** /etc/network/interfaces:

auto lo
iface lo inet loopback


auto eth0
allow-hotplug eth0

iface eth0 inet manual
iface eth0 inet6 manual


auto br0
allow-hotplug br0

iface br0 inet static
bridge_ports eth0
address 192.168.0.3/16
broadcast 192.168.255.255
gateway 192.168.0.1
dns-nameservers 127.0.0.1
dns-search lan.dac

post-up /sbin/brctl setfd br0 0 addif br0 eth0

auto br0:0
allow-hotplug br0:0

iface br0:0 inet static
address 192.168.122.1/16
broadcast 192.168.255.255
dns-nameservers 127.0.0.1
dns-search v-zone.lan.dac

auto br0:1
allow-hotplug br0:1

iface br0:1 inet6 static
address FC00:::::::0003
dns-nameservers ::1
netmask 64



auto br0:2
allow-hotplug 

Bug#1009977: gdm3: Fails to start since 2022/04/19 on Debian/testing

[Adrian Immanuel Kiess]

 22 05:04:15 g6.lan.dac gnome-shell[12614]: Failed to lock front
buffer on /dev/dri/card0: drmModeAddFB2WithModifiers failed: Invalid
argument avril 22 05:04:15 g6.lan.dac gnome-shell[12614]: Failed to
lock front buffer on /dev/dri/card0: drmModeAddFB2WithModifiers failed:
Invalid argument avril 22 05:04:15 g6.lan.dac gnome-shell[12614]:
Failed to lock front buffer on /dev/dri/card0:
drmModeAddFB2WithModifiers failed: Invalid argument avril 22 05:04:15
g6.lan.dac gnome-shell[12614]: Failed to lock front buffer
on /dev/dri/card0: drmModeAddFB2WithModifiers failed: Invalid argument
avril 22 05:04:15 g6.lan.dac gnome-shell[12614]: Failed to lock front
buffer on /dev/dri/card0: drmModeAddFB2WithModifiers failed: Invalid
argument avril 22 05:04:15 g6.lan.dac gnome-shell[12614]: Failed to
lock front buffer on /dev/dri/card0: drmModeAddFB2WithModifiers failed:
Invalid argument avril 22 05:04:15 g6.lan.dac gnome-shell[12614]:
Failed to lock front buffer on /dev/dri/card0:
drmModeAddFB2WithModifiers failed: Invalid argument avril 22 05:04:15
g6.lan.dac gnome-shell[12614]: Failed to lock front buffer
on /dev/dri/card0: drmModeAddFB2WithModifiers failed: Invalid argument
avril 22 05:04:15 g6.lan.dac gnome-shell[12614]: Failed to lock front
buffer on /dev/dri/card0: drmModeAddFB2WithModifiers failed: Invalid
argument avril 22 05:04:15 g6.lan.dac gnome-shell[12614]: Failed to
lock front buffer on /dev/dri/card0: drmModeAddFB2WithModifiers failed:
Invalid argument avril 22 05:04:16 g6.lan.dac gnome-shell[12614]:
Failed to lock front buffer on /dev/dri/card0:
drmModeAddFB2WithModifiers failed: Invalid argument avril 22 05:04:16
g6.lan.dac gnome-shell[12614]: Failed to lock front buffer
on /dev/dri/card0: drmModeAddFB2WithModifiers failed: Invalid argument
avril 22 05:04:20 g6.lan.dac gnome-shell[12614]: No permission to
control network connections: Polkit.Error:
GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: Action
org.freedesktop.NetworkManager.network-control is not registered

Where it says:

 Failed to lock front buffer on /dev/dri/card0:
drmModeAddFB2WithModifiers failed: Invalid argument

I'd like to note, the recent upgrade has introduced some bugs also with
goa-daemon, where goa-daemon is consistently respawning, after logging
into a X session with startx. If I kill goa-daemon with $ killall -9
goa-daemon, this stops, and I can use my GNOME applications again,
without waiting a half minute for them to start.

Thank you very much.

Sincerely,

Adrian Kiess



On Thu, 21 Apr 2022 12:34:37 -0400
Jeremy Bicha  wrote:

> On Thu, Apr 21, 2022 at 11:51 AM Adrian Immanuel Kiess
>  wrote:
> > GDM3 fails to load, after bringing up the system.
> 
> Please switch to a virtual terminal (like Ctrl+Alt+F3) and look for
> interesting messages in
> journalctl -b
> 
> Probably especially messages from gnome-shell or gdm
> 
> Thank you,
> Jeremy Bicha

Bug#1009977: gdm3: Fails to start since 2022/04/19 on Debian/testing

[Adrian Immanuel Kiess]

Package: gdm3
Version: 42.0-1
Severity: normal

Dear Maintainer,

   * What led up to the situation?
 Upgrading my Debian/testing installation on 2022/04/19
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 # apt -u dist-upgrade
   * What was the outcome of this action?
 GDM3 fails to start after system loaded
   * What outcome did you expect instead?
 GDM3 loading fine and present login screen

since 2022/04/19, after a regular system update on my Debian/testing
installation,
GDM3 fails to load, after bringing up the system.

A curser on the upper left, top part of the screen is blinking and nothing is
happening afterwards. My GDM3 configuration is the same as before.

I have to manually login as root (CTRL+ALT+F[x]) and issue # service gdm3 stop.

Running then startx as normal user works still fine.

Maybe Wayland is broken, due to GDM3 can't load.

Thank you very much for your kind attention.

Sincerely,

Adrian Kieß



-- System Information:
Debian Release: bookworm/sid
  APT prefers testing
  APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 5.16.0-6-amd64 (SMP w/4 CPU threads; PREEMPT)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) (ignored: LC_ALL 
set to fr_FR.UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages gdm3 depends on:
ii  9wm [x-window-manager]   1.4.1-1
ii  accountsservice  22.07.5-1
ii  adduser  3.121
ii  aewm [x-window-manager]  1.3.12-7
ii  aewm++ [x-window-manager]1.1.2-5.2
ii  afterstep [x-window-manager] 2.2.12-15
ii  amiwm [x-window-manager] 0.21pl2-2
ii  blackbox [x-window-manager]  0.70.1-38
ii  ctwm [x-window-manager]  4.0.3-1
ii  dbus [default-dbus-system-bus]   1.14.0-1
ii  dbus-bin 1.14.0-1
ii  dbus-daemon  1.14.0-1
ii  dconf-cli0.40.0-3
ii  dconf-gsettings-backend  0.40.0-3
ii  debconf [debconf-2.0]1.5.79
ii  deepin-terminal [x-terminal-emulator]5.2.11-1
ii  dwm [x-window-manager]   6.3-0.1
ii  enlightenment [x-window-manager] 0.25.3-1
ii  fluxbox [x-window-manager]   1.3.5-2.1
ii  fvwm [x-window-manager]  1:2.6.8-1+b2
ii  fvwm-crystal [x-window-manager]  3.4.1+dfsg-3
ii  gir1.2-gdm-1.0   42.0-1
ii  gnome-session [x-session-manager]42.0-1
ii  gnome-session-bin42.0-1
ii  gnome-session-common 42.0-1
ii  gnome-session-flashback [x-session-manager]  3.44.0-1
ii  gnome-settings-daemon42.1-3
ii  gnome-shell  42.0-3
ii  gnome-terminal [x-terminal-emulator] 3.44.0-1
ii  gsettings-desktop-schemas42.0-1
ii  jwm [x-window-manager]   2.4.1-1
ii  kwin-x11 [x-window-manager]  4:5.24.4-1
ii  libaccountsservice0  22.07.5-1
ii  libaudit11:3.0.7-1+b1
ii  libc62.33-7
ii  libcanberra-gtk3-0   0.30-10
ii  libcanberra0 0.30-10
ii  libgdk-pixbuf-2.0-0  2.42.8+dfsg-1
ii  libgdm1  42.0-1
ii  libglib2.0-0 2.72.1-1
ii  libglib2.0-bin   2.72.1-1
ii  libgtk-3-0   3.24.33-1
ii  libgudev-1.0-0   237-2
ii  libkeyutils1 1.6.1-3
ii  libpam-modules   1.4.0-11
ii  libpam-runtime   1.4.0-11
ii  libpam-systemd [logind]  250.4-1
ii  libpam0g 1.4.0-11
ii  librsvg2-common  2.52.5+dfsg-3+b1
ii  libselinux1  3.3-1+b2
ii  libsystemd0  250.4-1
ii  libx11-6 2:1.7.5-1
ii  libxau6  1:1.0.9-1
ii  libxcb1  1.14-3
ii  libxdmcp61:1.1.2-3
ii  lsb-base 11.1.0
ii  lxsession [x-session-manager]0.5.5-2+b1
ii  marco [x-window-manager] 1.26.0-2
ii  mate-session-manager [x-session-manager] 1.26.0-1
ii  mate-terminal [x-terminal-emulator]  1.26.0-1
ii  metacity [x-window-manager]  

Bug#1006603: closed by Debian FTP Masters (reply to Jeremy Bicha ) (Bug#1006603: fixed in evolution-data-server 3.44.0-2)

[Adrian Immanuel Kiess]

Dear Jeremy,

thank you very much for this bugfix!

Sincerely,

Adrian Kieß


On Sun, 20 Mar 2022 02:39:05 +
"Debian Bug Tracking System"  wrote:

> This is an automatic notification regarding your Bug report
> which was filed against the evolution-data-server package:
> 
> #1006603: evolution: Can't lock mbox file: The reported error was “Could not 
> lock “/var/mail/adrian””
> 
> It has been closed by Debian FTP Masters  
> (reply to Jeremy Bicha ).
> 
> Their explanation is attached below along with your original report.
> If this explanation is unsatisfactory and you have not received a
> better one in a separate message then please contact Debian FTP Masters 
>  (reply to Jeremy Bicha ) 
> by
> replying to this email.
> 
> 
> -- 
> 1006603: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1006603
> Debian Bug Tracking System
> Contact ow...@bugs.debian.org with problems


-- 
With many greetings from Leipzig, Germany.
Adrian Immanuel Kieß 

Gothaer Straße 34
D-04155 Leipzig

 — < adr...@kiess.onl >

--SYSTEM--
echo "Your fortune cookie: " && /usr/games/fortune -c -s de
> (zitate) % Das Weltall zerfällt in zwei Teile: Ich und der Rest. -- Giovanni 
> Papini

echo "g6.lan.dac uptime: " && /usr/bin/uptime
> 04:55:26 up 7 days, 15 min, 13 users, load average: 1,11, 1,14, 1,50

Bug#1006641: linux-image: Kernel reports IPMI error, repeated VERY often

[Adrian Immanuel Kiess]

Package: src:linux
Version: 5.16.7-2
Severity: normal

Dear Maintainer,

   * What led up to the situation?
 Upgrading to kernel 5.16.7-2
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 apt -u dist-upgrade
   * What was the outcome of this action?
 Kernel reports IPMI error in journalctl, message repeated very often and
floods the log file
   * What outcome did you expect instead?
 No error message from kernel

in the current Debian/testing, my system (A HP ProLiant ML110 G6) reports this
error in jounalctl:

mars 01 10:10:02 g6.lan.dac kernel: ipmi_si IPI0001:00: IPMI message handler:
IPMI message received with no owner. This could be because of a malformed
message, or because of a hardware error.  Contact your hardware vendor for
assistance.
mars 01 10:10:02 g6.lan.dac kernel: ipmi_si IPI0001:00: IPMI message handler:
IPMI message received with no owner. This could be because of a malformed
message, or because of a hardware error.  Contact your hardware vendor for
assistance.
mars 01 10:10:02 g6.lan.dac kernel: ipmi_si IPI0001:00: IPMI message handler:
IPMI message received with no owner. This could be because of a malformed
message, or because of a hardware error.  Contact your hardware vendor for
assistance.
mars 01 10:10:02 g6.lan.dac kernel: ipmi_si IPI0001:00: IPMI message handler:
IPMI message received with no owner. This could be because of a malformed
message, or because of a hardware error.  Contact your hardware vendor for
assistance.
mars 01 10:10:02 g6.lan.dac kernel: ipmi_si IPI0001:00: IPMI message handler:
IPMI message received with no owner. This could be because of a malformed
message, or because of a hardware error.  Contact your hardware vendor for
assistance.
mars 01 10:10:02 g6.lan.dac kernel: ipmi_si IPI0001:00: IPMI message handler:
IPMI message received with no owner. This could be because of a malformed
message, or because of a hardware error.  Contact your hardware vendor for
assistance.
mars 01 10:10:02 g6.lan.dac kernel: ipmi_si IPI0001:00: IPMI message handler:
IPMI message received with no owner. This could be because of a malformed
message, or because of a hardware error.  Contact your hardware vendor for
assistance.
mars 01 10:10:02 g6.lan.dac kernel: ipmi_si IPI0001:00: IPMI message handler:
IPMI message received with no owner. This could be because of a malformed
message, or because of a hardware error.  Contact your hardware vendor for
assistance.
mars 01 10:10:02 g6.lan.dac kernel: ipmi_si IPI0001:00: IPMI message handler:
IPMI message received with no owner. This could be because of a malformed
message, or because of a hardware error.  Contact your hardware vendor for
assistance.

The message is repeated VERY often and floods the log file!

I would be very gladful for a fix.

Thank you in advance.

Sincerely,

Adrian Kiess


-- Package-specific info:
** Version:
Linux version 5.16.0-1-amd64 (debian-ker...@lists.debian.org) (gcc-11 (Debian 
11.2.0-16) 11.2.0, GNU ld (GNU Binutils for Debian) 2.37.90.20220130) #1 SMP 
PREEMPT Debian 5.16.7-2 (2022-02-09)

** Command line:
BOOT_IMAGE=/vmlinuz-5.16.0-1-amd64 
root=UUID=96d5fdb9-5d4e-46f2-89e3-34fcfc7bfe14 ro 
resume=UUID=7c16d6e7-d89d-4155-9381-7d25ed882953

** Tainted: W (512)
 * kernel issued warning

** Kernel log:
Unable to read kernel log; any relevant messages should be attached

** Model information
sys_vendor: HP
product_name: ProLiant ML110 G6
product_version: 
chassis_vendor: HP
chassis_version: N/A
bios_vendor: HP
bios_version: O27   
board_vendor: Wistron Corporation
board_name: ProLiant ML110 G6
board_version: 

** Loaded modules:
qrtr
mptcp_diag
tcp_diag
udp_diag
raw_diag
inet_diag
unix_diag
af_packet_diag
netlink_diag
dm_mod
vhost_net
vhost
vhost_iotlb
tap
tun
snd_seq_dummy
snd_hrtimer
snd_seq_midi
snd_seq_midi_event
snd_seq
nfnetlink
cpufreq_conservative
cpufreq_userspace
cpufreq_powersave
cpufreq_ondemand
bridge
stp
llc
uinput
binfmt_misc
quota_v2
quota_tree
intel_powerclamp
kvm_intel
kvm
irqbypass
intel_cstate
intel_uncore
pcspkr
joydev
amdgpu
snd_hda_codec_hdmi
snd_usb_audio
snd_usbmidi_lib
snd_hda_intel
snd_rawmidi
evdev
snd_intel_dspcfg
snd_seq_device
mc
snd_intel_sdw_acpi
snd_hda_codec
snd_hda_core
snd_hwdep
snd_pcm_oss
iTCO_wdt
intel_pmc_bxt
iTCO_vendor_support
snd_mixer_oss
sg
watchdog
snd_pcm
snd_timer
snd
gpu_sched
soundcore
ipmi_ssif
button
acpi_cpufreq
coretemp
ipmi_watchdog
squashfs
loop
acpi_ipmi
ipmi_si
ipmi_poweroff
ipmi_devintf
ipmi_msghandler
msr
i2c_dev
parport_pc
ppdev
nfsd
lp
parport
nfs_acl
fuse
lockd
auth_rpcgss
grace
configfs
sunrpc
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
btrfs
xor
raid6_pq
zstd_compress
libcrc32c
uhci_hcd
hid_generic
usbhid
hid
sd_mod
t10_pi
crc_t10dif
crct10dif_generic
sr_mod
cdrom
crct10dif_common
radeon
i2c_algo_bit
ahci
drm_ttm_helper
libahci
tg3
xhci_pci
ttm
libata
xhci_hcd
libphy
ehci_pci
drm_kms_helper
ehci_hcd
scsi_mod
usbcore
cec
rc_core
drm
ptp
i2c_i801
crc32c_intel
i2c_smbus

Bug#1006603: evolution: Can't lock mbox file: The reported error was “Could not lock “/var/mail/adrian””

[Adrian Immanuel Kiess]

Package: evolution
Version: 3.43.2-2
Severity: normal

Dear Maintainer,

   * What led up to the situation?
 Upgrading Evolution some months ago
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 apt -u dist-upgrade
   * What was the outcome of this action?
 Evolution is unable to lock the mbox file in /var/mail/adrian and reports
error
   * What outcome did you expect instead?
 Evolution being able to read and lock mbox mail file in /var/mail

in the recent Evolution mail reader on Debian/testing, I can't read my local
mails stored in /var/mail/adrian.

The error Evolution spits out is this:

Failed to refresh folder “adr...@lan.dac : INBOX”.

The reported error was “Could not lock “/var/mail/adrian””.

Here is the directory listing of /var/mail on my system:

root@g6 /var/mail # ls -lah
total 1,4M
drwxrwsr-x  2 root mail 4,0K 28 févr. 07:43 ./
drwxr-xr-x 17 root root 4,0K 18 oct.  11:49 ../
-rw-rw  1 adrian   mail0 28 févr. 07:44 adrian

Reading the mail with Sylpheed works fine.

I searched the Internet with Google, but could not find a solution.

I would be very gladful for help or fix.

Sincerely,

Adrian Kiess


-- System Information:
Debian Release: bookworm/sid
  APT prefers testing
  APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 5.16.0-1-amd64 (SMP w/4 CPU threads; PREEMPT)
Kernel taint flags: TAINT_WARN
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages evolution depends on:
ii  dbus   1.12.22-1
ii  evolution-common   3.43.2-2
ii  evolution-data-server  3.43.2-1
ii  libc6  2.33-7
ii  libcamel-1.2-633.43.2-1
ii  libclutter-gtk-1.0-0   1.8.4-4+b1
ii  libecal-2.0-1  3.43.2-1
ii  libedataserver-1.2-26  3.43.2-1
ii  libevolution   3.43.2-2
ii  libglib2.0-0   2.70.4-1
ii  libgtk-3-0 3.24.31-1
ii  libical3   3.0.14-1
ii  libnotify4 0.7.9-3
ii  libsoup2.4-1   2.74.2-3
ii  libxml22.9.12+dfsg-6
ii  psmisc 23.4-2

Versions of packages evolution recommends:
ii  evolution-plugin-bogofilter  3.43.2-2
ii  evolution-plugin-pstimport   3.43.2-2
ii  evolution-plugins3.43.2-2
ii  yelp 42~beta-2

Versions of packages evolution suggests:
pn  evolution-ews   
ii  evolution-plugins-experimental  3.43.2-2
ii  gnupg   2.2.27-3
pn  network-manager 

-- debconf information:
  evolution/kill_processes:
  evolution/needs_shutdown:

Bug#1001626: enlightenment: Starting gkrellm or qmmp, enlightenment process takes too much cpu cycles

[Adrian Immanuel Kiess]

Dear Ross,

thank you for your answer.

I talked to raster at the #e IRC-channel.

The cause seems to be the shaped windows, like gkrellm owns.

He suggested, I should change the default gkrellm theme.

This worked fine for a locally running gkrellm.

When using remote GTK applications over SSH, the shaped windows of my
current GTK seems to be the issue.

In addition to that, what also adds to the cause is the connection to
my virtual private server using SSH. Using another network connection to
a local VM, the issue is not present.

To fix this, I think I'll need faster hardware then. 

You can close this bug-report.

Thank you for your kind help.

Sincerely,

Adrian

On Wed, 15 Dec 2021 21:51:57 -0800
Ross Vandegrift  wrote:

> On Wed, Dec 15, 2021 at 11:37:24AM +0100, Adrian Immanuel Kiess wrote:
> > I can sharpen this in the way that I use the gkrellm instances remotely
> > over SSH connections. Also, other GTK+/GNOME3 applications executed
> > remotely over SSH and displayed locally on my Enlightenment XOrg window
> > manager session take a lot of high CPU% cycles.
> > 
> > Maybe this helps identify the bottle-neck.
> > 
> > Sometimes it takes a low CPU% percentage at start right after booting
> > into Englightenment, but having eight gkrellm instances (seven remotely
> > via SSH) make take Enlightenment one full CPU core after having it
> > run for a while. 
> > 
> > This does not happen when I don't run gkrellm. Enlightenment takes as
> > low as 0,7-6% CPU% usage, even after having running Enlightenment for
> > two days. Spurring on gkrellm, the same affect happens again.
> > 
> > Changing the refresh time/rate of gkrellm in the gkrellm preferences
> > does not change the effect.
> 
> That's strange - changing the refresh rate has a large impact for me.  At 
> 20Hz,
> enlightenment uses ~25%; at 1Hz, enlightenment uses ~2%.  Running local vs
> remote over ssh doesn't seem to make any difference.
> 
> > I hope this can be fixed! If no solution can be found (maybe it has to
> > do with some library, I don't know) I will contact 
> > https://www.enlightenment.org/contact.
> 
> Good luck!
> 
> Ross


-- 
With many greetings from Leipzig, Germany.
Adrian Immanuel Kieß 

Gothaer Straße 34
D-04155 Leipzig

 — < adr...@kiess.onl >

--SYSTEM--
echo "Your fortune cookie: " && /usr/games/fortune -c -s de
> (zitate) % Die Hölle kann auch produktiv sein, der Himmel ist nur langweilig. 
> -- Herbert Achternbusch

echo "g6.lan.dac uptime: " && /usr/bin/uptime
> 17:29:26 up 6 days, 4:26, 14 users, load average: 0,75, 1,38, 1,62

Bug#1001626: enlightenment: Starting gkrellm or qmmp, enlightenment process takes too much cpu cycles

[Adrian Immanuel Kiess]

Dear Ross,

I can sharpen this in the way that I use the gkrellm instances remotely
over SSH connections. Also, other GTK+/GNOME3 applications executed
remotely over SSH and displayed locally on my Enlightenment XOrg window
manager session take a lot of high CPU% cycles.

Maybe this helps identify the bottle-neck.

Sometimes it takes a low CPU% percentage at start right after booting
into Englightenment, but having eight gkrellm instances (seven remotely
via SSH) make take Enlightenment one full CPU core after having it
run for a while. 

This does not happen when I don't run gkrellm. Enlightenment takes as
low as 0,7-6% CPU% usage, even after having running Enlightenment for
two days. Spurring on gkrellm, the same affect happens again.

Changing the refresh time/rate of gkrellm in the gkrellm preferences
does not change the effect.

I hope this can be fixed! If no solution can be found (maybe it has to
do with some library, I don't know) I will contact 
https://www.enlightenment.org/contact.

With best wishes.

Sincerely,

Adrian Kieß


On Wed, 15 Dec 2021 00:22:10 -0800
Ross Vandegrift  wrote:

> Hello,
> 
> On Mon, Dec 13, 2021 at 01:29:34PM +0100, Adrian Immanuel Kiess wrote:
> > Enlightenment from Debian/testing takes too much CPU cycles running 
> > instances
> > of gkrellm or qmmp.
> > 
> > I usually start up to eight instances of gkrellm for my virtual machines and
> > starting those gkrellm
> > processes inside a Enlightenment session, issues full load to one CPU core 
> > (Two
> > gkrellm program instances are enough). The same applies to the program qmmp,
> > which also issues high load to the machine.
> 
> One gkrellm instance on my laptop causes ~6% enlightenment cpu + ~4% Xorg CPU
> on my laptop.  gkrellm is constantly updating the screen - every screen update
> must be composited and rendered by enlightenment & X.  I also tried under 
> gnome
> on wayland.  It caused about ~3% for each of 2 gnome processes - so about half
> as much.
> 
> gkrellm didn't let me start multiple instances.  The manpage indicates that it
> prevents that for performance reasons.
> 
> You're probably best contacting the upstream developers for this issue.  IRC,
> email, etc info is at https://www.enlightenment.org/contact
> 
> Ross


-- 
With many greetings from Leipzig, Germany.
Adrian Immanuel Kieß 

Gothaer Straße 34
D-04155 Leipzig

 — < adr...@kiess.onl >

--SYSTEM--
echo "Your fortune cookie: " && /usr/games/fortune -c -s de
> (zitate) % Das Seltenste, was ich gesehen: ein alter Tyrann. -- Thales von 
> Milet (650-560 v.Chr.)

echo "g6.lan.dac uptime: " && /usr/bin/uptime
> 11:23:11 up 22:20, 11 users, load average: 2,22, 2,52, 2,59

Bug#1001626: enlightenment: Starting gkrellm or qmmp, enlightenment process takes too much cpu cycles

[Adrian Immanuel Kiess]

Package: enlightenment
Version: 0.24.2-8
Severity: normal

Dear Maintainer,

   * What led up to the situation?
 Starting instances of gkrellm or qmmp inside an Enlightenment Xorg session
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 Logging in, into Enlightenment via GDM3 and starting instances of gkrellm
or qmmp
   * What was the outcome of this action?
 Enlightenment process takes up to ~99% CPU cycles of one core, viewing
this with top or htop
   * What outcome did you expect instead?
 Enlightenment taking less CPU cycles

Enlightenment from Debian/testing takes too much CPU cycles running instances
of gkrellm or qmmp.

I usually start up to eight instances of gkrellm for my virtual machines and
starting those gkrellm
processes inside a Enlightenment session, issues full load to one CPU core (Two
gkrellm program instances are enough). The same applies to the program qmmp,
which also issues high load to the machine.

I have started gkrellm under gnome-session (Wayland and Xorg) where this
problem does not occur.

I would be very gladful if this issue could be resolved, since I like the
Enlightenment window manager very much and would like to continue using it. It
is a very flexible window manager where everything I need to tweak can be
tweaked and is also looking very good!

The version of Enlightenment used is: 0.24.2-8.

I tried fiddling around with the composer settings of Enlightenment, but none
of the settings I have tried could fix the problem. I am still using
Enlightenment with graphics card acceleration enabled — I also tried software
rendering, but the above issue persists.

Maybe you can try the above steps on your own machine.

Thank you in advance for your kind attention.

With very best greetings from Leipzig,

Adrian Kieß


-- System Information:
Debian Release: bookworm/sid
  APT prefers testing
  APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 5.15.0-2-amd64 (SMP w/4 CPU threads)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages enlightenment depends on:
ii  dbus-user-session [default-dbus-session-bus]  1.12.20-3
ii  dbus-x11 [dbus-session-bus]   1.12.20-3
ii  enlightenment-data0.24.2-8
ii  libasound21.2.5.1-1
ii  libbluetooth3 5.61-1
ii  libc6 2.32-5
ii  libecore-con1 1.25.1-1
ii  libecore-drm2-1   1.25.1-1
ii  libecore-evas11.25.1-1
ii  libecore-file11.25.1-1
ii  libecore-input1   1.25.1-1
ii  libecore-ipc1 1.25.1-1
ii  libecore-wl2-11.25.1-1
ii  libecore-x1   1.25.1-1
ii  libecore1 1.25.1-1
ii  libedje-bin   1.25.1-1
ii  libedje1  1.25.1-1
ii  libeet1   1.25.1-1
ii  libeeze1  1.25.1-1
ii  libefreet-bin 1.25.1-1
ii  libefreet1a   1.25.1-1
ii  libeina1a 1.25.1-1
ii  libeio1   1.25.1-1
ii  libelementary11.25.1-1
ii  libelput1 1.25.1-1
ii  libemile1 1.25.1-1
ii  libemotion1   1.25.1-1
ii  libevas1  1.25.1-1
ii  libevas1-engines-drm  1.25.1-1
ii  libevas1-engines-wayland  1.25.1-1
ii  libevas1-engines-x1.25.1-1
ii  libpam0g  1.4.0-11
ii  libpulse0 15.0+dfsg1-2
ii  libuuid1  2.37.2-4
ii  libwayland-client01.19.0-2+b1
ii  libwayland-server01.19.0-2+b1
ii  libxkbcommon0 1.3.1-1

Versions of packages enlightenment recommends:
ii  acpid  1:2.0.33-1
ii  bc 1.07.1-3+b1
ii  bluez  5.61-1
ii  deepin-terminal [x-terminal-emulator]  5.2.11-1
ii  eterm [x-terminal-emulator]0.9.6-6.1
ii  gnome-terminal [x-terminal-emulator]   3.42.2-1
ii  libddcutil30.9.9-2
ii  libevas-loaders1.25.1-1
ii  mate-terminal [x-terminal-emulator]1.24.1-1+b1
ii  mrxvt 

Bug#856384: fortune-mod: fortune all fails to load any cookies

[Adrian Immanuel Kiess]

Package: fortune-mod
Version: 1:1.99.1-7.1
Followup-For: Bug #856384

Dear Maintainer,

   * What led up to the situation?
Running fortune all
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
Running fortune all
   * What was the outcome of this action?
Error message
   * What outcome did you expect instead?
A fortune cookie being displayed

this bug still exists in the current Debian/testing distribution. When
executing fortune all, the program shows this output:

adrian@g6 ~ % fortune all
No fortunes found

I can execute fortune all without any issues on NetBSD and FreeBSD, where a
cookie is shown by running fortune all.

The error exists on both of my Debian/testing installations.

Thank you for your kind attention.

Adrian Kieß

-- System Information:
Debian Release: 11.0
  APT prefers testing
  APT policy: (990, 'testing'), (550, 'unstable'), (500, 'testing-security')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 5.10.0-7-amd64 (SMP w/4 CPU threads)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) (ignored: LC_ALL
set to fr_FR.UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages fortune-mod depends on:
ii  libc6   2.31-12
ii  librecode0  3.6-24

Versions of packages fortune-mod recommends:
ii  fortunes [fortune-cookie-db]   1:1.99.1-7.1
ii  fortunes-bg [fortune-cookie-db]1.3+nmu1
ii  fortunes-bofh-excuses [fortune-cookie-db]  1.2-3
ii  fortunes-de [fortune-cookie-db]0.34-1
ii  fortunes-debian-hints [fortune-cookie-db]  2.01.3
ii  fortunes-fr [fortune-cookie-db]0.65+nmu3
ii  fortunes-it-off [fortune-cookie-db]1.99-4.1
ii  fortunes-min [fortune-cookie-db]   1:1.99.1-7.1
ii  fortunes-off [fortune-cookie-db]   1:1.99.1-7.1
ii  fortunes-ru [fortune-cookie-db]1.52-3.1

Versions of packages fortune-mod suggests:
ii  bsdmainutils  12.1.7+nmu3
ii  fortunes  1:1.99.1-7.1
ii  x11-utils 7.7+5

Bug#972713: libnss3: Handshake failed (-12251) with Pidgin since 2:3.58-1

[Adrian Immanuel Kiess]

Package: libnss3
Version: 2:3.58-1
Followup-For: Bug #972713

Dear Maintainer,

I can confirm, Pidgin from Debian/testing as today of 29, Oct 2020, won't
connect to any SSL/TLS service.

I get the following error:

(10:56:34) jabber: Recv (50): 
(10:56:34) nss: Handshake failed  (-12251)
(10:56:34) connection: Connection error on 0x562eeeab97a0 (reason: 5
description: Échec de la poignée de main SSL)

running Pidgin with the debug option (-d).

The server side, a Prosody server running on Debian/testing too, says this:

Oct 29 10:56:34 c2s560b80857610 infoClient connected
Oct 29 10:56:34 c2s560b80857610 infoClient disconnected: ssl handshake
error: sslv3 alert unexpected message

As I found this bug report, which is related to my problem, NSS seems to be the
issue here.

Thank you for reading this.

Sincerely,

Adrian Kieß



-- System Information:
Debian Release: bullseye/sid
  APT prefers testing
  APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 5.9.0-1-amd64 (SMP w/4 CPU threads)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) (ignored: LC_ALL 
set to fr_FR.UTF-8), LANGUAGE=fr:de:en:ru
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages libnss3 depends on:
ii  libc6 2.31-4
ii  libnspr4  2:4.29-1
ii  libsqlite3-0  3.33.0-1

libnss3 recommends no packages.

libnss3 suggests no packages.

-- no debconf information

Bug#965099: XWayland: Won't startup session with my specific GNOME configuration

[Adrian Immanuel Kiess]

Package: xwayland
Version: 2:1.20.8-2
Severity: normal

Dear Maintainer,

   * What led up to the situation?
 Updated the system
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 apt -u dist-upgrade
   * What was the outcome of this action?
 GNOME does not start any longer with my own GNOME configuration. Using
GNOME on Xorg from the GDM3 login manager works fine, other account with not
much changed GNOME settings do work also
   * What outcome did you expect instead?
 Running GNOME on Wayland

currently in Debian/testing I want to report the following problem/bug:

I have a good one year old GNOME configuration for my own user account I am
using on this system.

I can't login to XWayland using GNOME (on Wayland) using the GDM3 login
manager. After the password got accepted it loads services like tracker fine,
but then  halts and also the mouse pointer gets to an hold.

I can login to two other accounts to this system with GNOME on XWayland fine,
but those have a not much changed GNOME default configuration.

I can also login with that GNOME configuration of my own user account to GNOME
on Xorg fine.

I have no clue why it won't work, I tried to monitor the logs with journalctl
-f but I couldn't find anything suspicious.

Maybe you can try to login to GNOME on XWayland using an user account with used
and changed config files.

Yours sincereley,

Adrian Kieß



-- System Information:
Debian Release: bullseye/sid
  APT prefers testing
  APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 5.7.0-1-amd64 (SMP w/4 CPU threads)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages xwayland depends on:
ii  libaudit1   1:2.8.5-3+b1
ii  libbsd0 0.10.0-1
ii  libc6   2.30-8
ii  libdrm2 2.4.102-1
ii  libepoxy0   1.5.4-1
ii  libgbm1 20.1.2-1
ii  libgcrypt20 1.8.5-5
ii  libgl1  1.3.1-1
ii  libpixman-1-0   0.36.0-1
ii  libselinux1 3.0-1+b3
ii  libsystemd0 245.6-2
ii  libunwind8  1.2.1-9
ii  libwayland-client0  1.18.0-1
ii  libxau6 1:1.0.8-1+b2
ii  libxdmcp6   1:1.1.2-3
ii  libxfont2   1:2.0.3-1
ii  libxshmfence1   1.3-1
ii  xserver-common  2:1.20.8-2

xwayland recommends no packages.

xwayland suggests no packages.

-- no debconf information

Bug#951117: eo logs in .xsession-errors eat all disk space

[Adrian Immanuel Kiess]

Package: enlightenment
Version: 0.23.1-5
Followup-For: Bug #951117

Dear Maintainer,

   * What led up to the situation?
 Upgrading E17
   * What was the outcome of this action?
 The logfiles (syslog, systemd logs) get flooded and up to 20 Gigabyte
large per day
   * What outcome did you expect instead?
 No error messages in syslog and systemd logs

currently in Debian/testing the logfiles getting flooded with the following
error using the current E17 desktop from Debian/testing:

Apr 29 11:09:42 g6 /usr/libexec/gdm-x-session[5217]: ERR<5217>:eo
../src/lib/eo/eo.c:1814 efl_isa() Eo ID 0x4030fb46 is not a valid object.
Current thread: main. This ID has probably been deleted or this was never a
valid object ID. (domain=0, current_domain=0, local_domain=0,
available_domains=[0 1], generation=346, id=c3e, ref=1)
Apr 29 11:09:42 g6 /usr/libexec/gdm-x-session[5217]: ERR<5217>:eo
../src/lib/eo/eo.c:2192 efl_data_scope_get() Eo ID 0x4030fb46 is not a
valid object. Current thread: main. This ID has probably been deleted or this
was never a valid object ID. (domain=0, current_domain=0, local_domain=0,
available_domains=[0 1], generation=346, id=c3e, ref=1)
Apr 29 11:09:42 g6 /usr/libexec/gdm-x-session[5217]: ERR<5217>:eo
../src/lib/eo/eo.c:1814 efl_isa() Eo ID 0x4030fb46 is not a valid object.
Current thread: main. This ID has probably been deleted or this was never a
valid object ID. (domain=0, current_domain=0, local_domain=0,
available_domains=[0 1], generation=346, id=c3e, ref=1)
Apr 29 11:09:42 g6 /usr/libexec/gdm-x-session[5217]: ERR<5217>:eo
../src/lib/eo/eo.c:2192 efl_data_scope_get() Eo ID 0x4030fb46 is not a
valid object. Current thread: main. This ID has probably been deleted or this
was never a valid object ID. (domain=0, current_domain=0, local_domain=0,
available_domains=[0 1], generation=346, id=c3e, ref=1)
Apr 29 11:09:42 g6 /usr/libexec/gdm-x-session[5217]: ERR<5217>:eo
../src/lib/eo/eo.c:1814 efl_isa() Eo ID 0x4030fb46 is not a valid object.
Current thread: main. This ID has probably been deleted or this was never a
valid object ID. (domain=0, current_domain=0, local_domain=0,
available_domains=[0 1], generation=346, id=c3e, ref=1)
Apr 29 11:09:42 g6 /usr/libexec/gdm-x-session[5217]: ERR<5217>:eo
../src/lib/eo/eo.c:2192 efl_data_scope_get() Eo ID 0x4030fb46 is not a
valid object. Current thread: main. This ID has probably been deleted or this
was never a valid object ID. (domain=0, current_domain=0, local_domain=0,
available_domains=[0 1], generation=346, id=c3e, ref=1)
Apr 29 11:09:42 g6 /usr/libexec/gdm-x-session[5217]: ERR<5217>:eo
../src/lib/eo/eo.c:1814 efl_isa() Eo ID 0x4030fb46 is not a valid object.
Current thread: main. This ID has probably been deleted or this was never a
valid object ID. (domain=0, current_domain=0, local_domain=0,
available_domains=[0 1], generation=346, id=c3e, ref=1)
... and so on.

The log files get up to 20 Gigabyte large per day because of this happening.
The only difference here is that I don't get this error messages logged to
.xsession-errors but to /var/log/syslog and journalctl.

I can reproduce this bug reported here before.

Is there any workaround known for this or an bug fix on it's way?

Thank you very much for you're kind attention.

Sincerely,

Adrian Kiess



-- System Information:
Debian Release: bullseye/sid
  APT prefers testing
  APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 5.5.0-2-amd64 (SMP w/4 CPU cores)
Kernel taint flags: TAINT_CRAP
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), 
LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages enlightenment depends on:
ii  dbus-user-session [default-dbus-session-bus]  1.12.16-2
ii  dbus-x11 [dbus-session-bus]   1.12.16-2
ii  enlightenment-data0.23.1-5
ii  libasound21.2.2-2.1
ii  libbluetooth3 5.50-1.2
ii  libc6 2.30-4
ii  libecore-con1 1.23.3-8
ii  libecore-drm2-1   1.23.3-8
ii  libecore-evas11.23.3-8
ii  libecore-file11.23.3-8
ii  libecore-input1   1.23.3-8
ii  libecore-ipc1 1.23.3-8
ii  libecore-wl2-11.23.3-8
ii  libecore-x1   1.23.3-8
ii  libecore1 1.23.3-8
ii  libedje-bin   1.23.3-8
ii  libedje1  1.23.3-8
ii  libeet1   1.23.3-8
ii  libeeze1  1.23.3-8
ii  libefreet-bin 

Bug#959071: xserver-xephyr: Xephyr and Xnest: AltGr combined keystrokes do not work while using German keyboard layout

[Adrian Immanuel Kiess]

Package: xserver-xephyr
Version: 2:1.20.8-2
Severity: normal

Dear Maintainer,

   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 Xephyr :2 -query m2n.lan.dac -screen 1920x1080 &
 or
 Xnest -query tdz2000.lan.dac -geometry 1600x1050 :2
   * What was the outcome of this action?
 Everything works fine, exept AltGr combined keystrokes like "\" key on a
German keyboard
   * What outcome did you expect instead?
 Working AltGr (right Alt key) key on a German keyboard

currently in Debian/testing Xnest and Xephyr report the following error, when
used with a German keyboard layout:

adrian@g6 ~ % Xephyr :2 -query m2n.lan.dac -screen 1920x1080 &
[1] 74607
adrian@g6 ~ % The XKEYBOARD keymap compiler (xkbcomp) reports:
> Internal error:   Could not resolve keysym XF86FullScreen
Errors from xkbcomp are not fatal to the X server

In the effect, hitting AltGr + ß does produce no key instead of "\". Any AltGr
combined keystroke is broken and does not work.

I hit this error connecting to an XDM display manager running on NetBSD 9
connected over a local lan network. I tried with two real NetBSD 9 machines on
the local network. AltGr works fine on those NetBSD 9 machines locally with
console login and Xorg login or on my Debian/testing host here with
Enlightenment DR 17.

Please can you have a look at this issue.

Thank you very much.

Sincerely,

Adrian Kiess



-- System Information:
Debian Release: bullseye/sid
  APT prefers testing
  APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 5.5.0-2-amd64 (SMP w/4 CPU cores)
Kernel taint flags: TAINT_CRAP
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), 
LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages xserver-xephyr depends on:
ii  libaudit11:2.8.5-3+b1
ii  libbsd0  0.10.0-1
ii  libc62.30-4
ii  libepoxy01.5.4-1
ii  libgcrypt20  1.8.5-5
ii  libgl1   1.3.1-1
ii  libpixman-1-00.36.0-1
ii  libselinux1  3.0-1+b3
ii  libsystemd0  245.5-1
ii  libudev1 245.5-1
ii  libunwind8   1.2.1-9
ii  libx11-6 2:1.6.9-2
ii  libx11-xcb1  2:1.6.9-2
ii  libxau6  1:1.0.8-1+b2
ii  libxcb-icccm40.4.1-1.1
ii  libxcb-image00.4.0-1+b2
ii  libxcb-keysyms1  0.4.0-1+b2
ii  libxcb-randr01.14-2
ii  libxcb-render-util0  0.3.9-1+b1
ii  libxcb-render0   1.14-2
ii  libxcb-shape01.14-2
ii  libxcb-shm0  1.14-2
ii  libxcb-util0 0.3.8-3+b2
ii  libxcb-xkb1  1.14-2
ii  libxcb-xv0   1.14-2
ii  libxcb1  1.14-2
ii  libxdmcp61:1.1.2-3
ii  libxfont21:2.0.3-1
ii  libxshmfence11.3-1
ii  xserver-common   2:1.20.8-2

Versions of packages xserver-xephyr recommends:
ii  libgl1-mesa-dri  19.3.3-1

xserver-xephyr suggests no packages.

-- no debconf information

Bug#956182: gnome-boxes: Can't connect to any {VM} since upgrade to version 3.36.x

[Adrian Immanuel Kiess]

Package: gnome-boxes
Version: 3.36.2-1
Severity: important

Dear Maintainer,

   * What led up to the situation?
 Upgrading gnome-boxes to version 3.36
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 apt dist-upgrade
   * What was the outcome of this action?
 gnome-boxes can't connect to any virtual machine on localhosts system:///
   * What outcome did you expect instead?
 Working application

currently in Debian/testing gnome-boxes is seriously broken. Today's update to
3.36.2 didnt fixed the issue.

One can't connect to any virtual machine's full window session. The application
say's "Can't connect". The preview of the virtual machine is correctly
displayed and I am able to start and stop a virtual machine.

Sincerely,

Adrian Kiess





-- System Information:
Debian Release: bullseye/sid
  APT prefers testing
  APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 5.4.0-4-amd64 (SMP w/4 CPU cores)
Kernel taint flags: TAINT_CRAP
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), 
LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages gnome-boxes depends on:
ii  dconf-gsettings-backend [gsettings-ba  0.36.0-1
ii  gconf-gsettings-backend [gsettings-ba  3.2.6-6
ii  genisoimage9:1.1.11-3.1
ii  libarchive13   3.4.0-2
ii  libc6  2.30-4
ii  libcairo2  1.16.0-4
ii  libfreerdp2-2  2.0.0~git20190204.1.2693389a+dfsg1-2
ii  libgdk-pixbuf2.0-0 2.40.0+dfsg-3
ii  libglib2.0-0   2.64.1-1
ii  libgtk-3-0 3.24.14-1
ii  libgtk-vnc-2.0-0   1.0.0-1
ii  libgudev-1.0-0 233-1
ii  libosinfo-1.0-01.7.1-1
ii  libosinfo-bin  1.7.1-1
ii  libpango-1.0-0 1.42.4-8
ii  libsecret-1-0  0.20.2-1
ii  libsoup2.4-1   2.70.0-1
ii  libspice-client-glib-2.0-8 0.37-2
ii  libspice-client-gtk-3.0-5  0.37-2
ii  libtracker-sparql-2.0-02.3.4-1
ii  libusb-1.0-0   2:1.0.23-2
ii  libvirt-daemon 6.0.0-5
ii  libvirt-glib-1.0-0 3.0.0-1
ii  libvte-2.91-0  0.60.1-1
ii  libwebkit2gtk-4.0-37   2.28.0-2
ii  libwinpr2-22.0.0~git20190204.1.2693389a+dfsg1-2
ii  libxml22.9.10+dfsg-4
ii  tracker2.3.4-1

Versions of packages gnome-boxes recommends:
ii  qemu-system-x86  1:4.2-3

gnome-boxes suggests no packages.

-- no debconf information

Bug#955523: polari: Join button is grayed out. No rooms shown.

[Adrian Immanuel Kiess]

Package: polari
Version: 3.36.0-1
Followup-For: Bug #955523

Dear Maintainer,

I can reproduce this bug and want to attach my error message. Polari displays
no chatrooms and can't connect to anything while starting with a fresh
configuration.

The error is as follows:

polari:341084): dbind-WARNING **: 12:32:48.891: Couldn't register with
accessibility bus: Did not receive a reply. Possible causes include: the remote
application did not send a reply, the message bus security policy blocked the
reply, the reply timeout expired, or the network connection was broken.

(polari:341084): Gjs-WARNING **: 12:32:51.618: JS ERROR: TelepathyGLib.Error:
_onRowActivated/<@resource:///org/gnome/Polari/js/connections.js:216:27
main@resource:///org/gnome/Polari/js/main.js:63:12
run@resource:///org/gnome/gjs/modules/package.js:222:12
start@resource:///org/gnome/gjs/modules/package.js:206:5
@:1:1

I have to use HexChat in the meantime, which is a working replacement.

Thank you for your kind patience.

Sincerely,

Adrian Kiess



-- System Information:
Debian Release: bullseye/sid
  APT prefers testing
  APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 5.4.0-4-amd64 (SMP w/4 CPU cores)
Kernel taint flags: TAINT_CRAP
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), 
LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages polari depends on:
ii  dconf-gsettings-backend [gsettings-backend]  0.36.0-1
ii  gconf-gsettings-backend [gsettings-backend]  3.2.6-6
ii  gir1.2-gdkpixbuf-2.0 2.40.0+dfsg-3
ii  gir1.2-glib-2.0  1.64.0-2
ii  gir1.2-gspell-1  1.8.3-1
ii  gir1.2-gtk-3.0   3.24.14-1
ii  gir1.2-pango-1.0 1.42.4-8
ii  gir1.2-secret-1  0.20.2-1
ii  gir1.2-soup-2.4  2.70.0-1
ii  gir1.2-telepathyglib-0.120.24.1-2+b1
ii  gir1.2-telepathylogger-0.2   0.8.2-4
ii  gjs  1.58.1-2
ii  libc62.30-4
ii  libgirepository-1.0-11.64.0-2
ii  libgjs0g 1.58.1-2
ii  libglib2.0-0 2.64.1-1
ii  libglib2.0-bin   2.64.1-1
ii  libgtk-3-0   3.24.14-1
ii  libtelepathy-glib0   0.24.1-2+b1
ii  telepathy-idle   0.2.0-2+b1
ii  telepathy-logger 0.8.2-4
ii  telepathy-mission-control-5  1:5.16.5-1

polari recommends no packages.

polari suggests no packages.

-- no debconf information

Bug#944442: squid: Crashes when listening to audio stream over the Squid proxy

[Adrian Immanuel Kiess]

Package: squid
Version: 4.6-1+deb10u1
Severity: normal

Dear Maintainer,

   * What led up to the situation?
 Listen to an audio stream over the Squid proxy
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 Listening to audio streams using Parole on the same host as the Squid
proxy
   * What was the outcome of this action?
 After ten or fifteen minutes of listening to an audio stream the Squid
proxy crashes and restarts itself
   * What outcome did you expect instead?
 Working Squid proxy while listening to audio streams

in current Debian/testing I discovered that listening to audio streams over the
Squid network proxy using Parole on the same host let's Squid crash after ten
or fifteen minutes of having the audio stream connection alive.

Due to Squid crashes and restarts itself as seen in the Syslog all active
network connections are dropped. That's how it came to my attention.

I found the corresponding error message in /var/log/syslog and is as follows:

Nov 10 05:01:14 g6 squid[27759]: assertion failed: stmem.cc:98: "lowestOffset
() <= target_offset"
Nov 10 05:01:14 g6 squid[2309]: Squid Parent: squid-1 process 27759 exited due
to signal 6 with status 0

After this message Squid exists and starts up again.

This bug is affecting the Debian version 4.6-1+deb10u1 of Squid.

Here the Syslog entries:

Nov 10 04:41:32 g6 squid[27759]: NETDB state saved; 120 entries, 12 msec
Nov 10 04:59:12 g6 systemd[1]: /lib/systemd/system/squid.service:7: PIDFile=
references a path below legacy directory /var/run/, updating /var/run/squid.pid
→ /run/squid.pid; please update the unit file accordingly.
Nov 10 04:59:22 g6 systemd[1]: /lib/systemd/system/squid.service:7: PIDFile=
references a path below legacy directory /var/run/, updating /var/run/squid.pid
→ /run/squid.pid; please update the unit file accordingly.
Nov 10 04:59:33 g6 systemd[1]: /lib/systemd/system/squid.service:7: PIDFile=
references a path below legacy directory /var/run/, updating /var/run/squid.pid
→ /run/squid.pid; please update the unit file accordingly.
Nov 10 04:59:33 g6 systemd[1]: /lib/systemd/system/squid.service:7: PIDFile=
references a path below legacy directory /var/run/, updating /var/run/squid.pid
→ /run/squid.pid; please update the unit file accordingly.
Nov 10 05:01:14 g6 squid[27759]: assertion failed: stmem.cc:98: "lowestOffset
() <= target_offset"
Nov 10 05:01:14 g6 squid[2309]: Squid Parent: squid-1 process 27759 exited due
to signal 6 with status 0
Nov 10 05:01:14 g6 squid[2309]: Squid Parent: (squid-1) process 18931 started
Nov 10 05:01:14 g6 squid[18931]: Set Current Directory to /var/spool/squid
Nov 10 05:01:14 g6 squid[18931]: Starting Squid Cache version 4.6 for
x86_64-pc-linux-gnu...

In all other use cases besides audio streams I could not find any error or
bugs.
It just happens by listening to an audio stream with Parole over the Squid
network proxy.

Thank you for your kind attention and reading this.

Yours sincerely,

Adrian Immanuel Kiess




-- System Information:
Debian Release: bullseye/sid
  APT prefers testing
  APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.19.0-5-amd64 (SMP w/4 CPU cores)
Kernel taint flags: TAINT_CRAP
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), 
LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages squid depends on:
ii  adduser  3.118
ii  libc62.29-2
ii  libcap2  1:2.27-1
ii  libcom-err2  1.45.4-1
ii  libdb5.3 5.3.28+dfsg1-0.6
ii  libdbi-perl  1.642-1+b2
ii  libecap3 1.0.1-3.2+b1
ii  libexpat12.2.9-1
ii  libgcc1  1:9.2.1-17
ii  libgnutls30  3.6.10-4
ii  libgssapi-krb5-2 1.17-6
ii  libkrb5-31.17-6
ii  libldap-2.4-22.4.48+dfsg-1+b2
ii  libltdl7 2.4.6-11
ii  libnetfilter-conntrack3  1.0.7-2
ii  libnettle6   3.4.1-1+b1
ii  libpam0g 1.3.1-5
ii  libsasl2-2   2.1.27+dfsg-1
ii  libstdc++6   9.2.1-17
ii  libxml2  2.9.4+dfsg1-7+b3
ii  logrotate3.15.1-1
ii  lsb-base 11.1.0
ii  netbase  5.6
ii  squid-common 4.6-1+deb10u1

Versions of packages squid recommends:
ii  ca-certificates  20190110
ii  libcap2-bin  1:2.27-1

Versions of packages squid suggests:
ii  resolvconf   1.79
pn  smbclient
pn  squid-cgi
pn  squid-purge  
ii  squidclient  4.6-1+deb10u1
pn  ufw  
pn  winbind  

-- Configuration Files:
/etc/squid/squid.conf changed:
acl ads dstdom_regex "/etc/squid/ad_block.txt"
http_access deny all ads
acl localnet src 0.0.0.1-0.255.255.255  # RFC 1122 "this" network (LAN)
acl localnet src 1

Bug#943687: linux-image-4.19.0-5-amd64: kernel forgets usb mice device connected through a usb version 3 monitor hub

[Adrian Immanuel Kiess]

Package: src:linux
Version: 4.19.37-6
Severity: normal

Dear Maintainer,

   * What led up to the situation?
 Bought a new monitor, a HP Z24i G2
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 Plugged monitor in, connected two usb devices onto the monitor hub; namely
a HP CCID keyboard and a standard HP laser mouse
   * What was the outcome of this action?
 The linux kernel seems to forget the USB HP laser mouse, after monitor
went into suspend state and wakes up again
   * What outcome did you expect instead?
 Working USB mouse after suspend state of monitor

I've connected a new HP Z24i G2 monitor to my Debian/testing system running
recent Xorg plus  Enlightenment DR17 and encounter the following problem:

I've connected two USB devices at the USB version 3 hub of the monitor which
works quite fine, a USB CCID keyboard and a standard HP USB laser mouse. But
when the HP Z24i G2 monitor wents into suspend state or is turned manually off,
the connected USB laser mouse won't work any longer after the monitor has
turned to ready state any longer.

Try this two or three times and let an hour pass while the monitor is turned
off. It is not happening all the time.

Workaround: Plug out and plug in again the HP USB laser mouse at the USB 3 hub
of the monitor.

I assume this is a linux kernel issue and has to do with the kernel
implementation of USB hubs.

I hope you can find a solution for this behaviour of the linux kernel.

Thank you very much for reading this.

Yours sincerely,

Adrian Kiess



-- Package-specific info:
** Version:
Linux version 4.19.0-5-amd64 (debian-ker...@lists.debian.org) (gcc version 
8.3.0 (Debian 8.3.0-19)) #1 SMP Debian 4.19.37-6 (2019-07-18)

** Command line:
BOOT_IMAGE=/vmlinuz-4.19.0-5-amd64 
root=UUID=96d5fdb9-5d4e-46f2-89e3-34fcfc7bfe14 ro 
resume=UUID=3d740914-57bc-440c-843f-d15812ee3903 splash splash vga=775

** Not tainted

** Kernel log:
Unable to read kernel log; any relevant messages should be attached

** Model information
sys_vendor: HP
product_name: ProLiant ML110 G6
product_version: 
chassis_vendor: HP
chassis_version: N/A
bios_vendor: HP
bios_version: O27   
board_vendor: Wistron Corporation
board_name: ProLiant ML110 G6
board_version: 

** Loaded modules:
nft_chain_route_ipv6
nft_chain_nat_ipv6
nf_nat_ipv6
rfcomm
cmac
bnep
btusb
btrtl
btbcm
btintel
bluetooth
drbg
ansi_cprng
ecdh_generic
rfkill
fuse
nf_conntrack_netlink
nft_chain_route_ipv4
xt_CHECKSUM
nft_chain_nat_ipv4
ipt_MASQUERADE
nf_nat_ipv4
nf_nat
xt_conntrack
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
ipt_REJECT
nf_reject_ipv4
nft_counter
xt_tcpudp
nft_compat
tun
bridge
stp
llc
devlink
nf_tables
nfnetlink
cpufreq_conservative
cpufreq_userspace
cpufreq_powersave
uinput
binfmt_misc
quota_v2
quota_tree
joydev
snd_usb_audio
snd_usbmidi_lib
snd_rawmidi
snd_seq_device
evdev
loop
intel_powerclamp
coretemp
ipmi_watchdog
ipmi_ssif
kvm_intel
kvm
snd_hda_codec_hdmi
irqbypass
amdgpu
snd_hda_intel
intel_cstate
sg
snd_hda_codec
snd_hda_core
intel_uncore
snd_hwdep
snd_pcm
pcspkr
snd_timer
iTCO_wdt
snd
chash
gpu_sched
iTCO_vendor_support
soundcore
pcc_cpufreq
button
acpi_cpufreq
dm_mod
nfsd
nfs_acl
lockd
auth_rpcgss
grace
sunrpc
ipmi_si
ipmi_poweroff
ipmi_devintf
ipmi_msghandler
i2c_dev
parport_pc
ppdev
lp
parport
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
fscrypto
ecb
crypto_simd
cryptd
glue_helper
aes_x86_64
btrfs
xor
zstd_decompress
zstd_compress
xxhash
raid6_pq
libcrc32c
crc32c_generic
uhci_hcd
uas
usb_storage
hid_generic
usbhid
hid
sr_mod
cdrom
sd_mod
radeon
ahci
libahci
xhci_pci
i2c_algo_bit
ehci_pci
libata
drm_kms_helper
xhci_hcd
ttm
ehci_hcd
scsi_mod
i2c_i801
drm
tg3
crc32c_intel
lpc_ich
usbcore
libphy
usb_common

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d130] 
(rev 11)
Subsystem: Hewlett-Packard Company Core Processor DMI [103c:3318]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 

00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root 
Port 1 [8086:d138] (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: 
Kernel driver in use: pcieport

00:08.0 System peripheral [0880]: Intel Corporation Core Processor System 
Management Registers [8086:d155] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 

00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore 
and Scratchpad Registers [8086:d156] 

Bug#935862: linux-image-5.2.0-2-amd64: linux kernel 5.2: System halts at or after startup

[Adrian Immanuel Kiess]

Package: src:linux
Version: 5.2.9-2
Severity: normal

Dear Maintainer,

   * What led up to the situation?
 Upgrading kernel from v4.19 to v5.2
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 apt dist-upgrade
   * What was the outcome of this action?
 System halts completely at or after startup
   * What outcome did you expect instead?
 Running system

I've upgraded my Debian/testing installation recently and the new kernel
versioned version 5.2 won't run on my HP ProLiant ML 110 G6 with Xeon X3430
cpu.

I've seen no error reports, just that the ipmisensors module can't load. I
suspect it's now integrated into the kernel.

The system starts up and then randomly halts at bootup, but before GDM (X login
manager) has finished to load.

I hope you can reproduce this bug and provide a fix for this.

Thank you very much in advance.

Yours sincerley,

Adrian Immanuel Kiess




-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
sys_vendor: HP
product_name: ProLiant ML110 G6
product_version: 
chassis_vendor: HP
chassis_version: N/A
bios_vendor: HP
bios_version: O27   
board_vendor: Wistron Corporation
board_name: ProLiant ML110 G6
board_version: 

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d130] 
(rev 11)
Subsystem: Hewlett-Packard Company Core Processor DMI [103c:3318]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 

00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root 
Port 1 [8086:d138] (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: 
Kernel driver in use: pcieport

00:08.0 System peripheral [0880]: Intel Corporation Core Processor System 
Management Registers [8086:d155] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 

00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore 
and Scratchpad Registers [8086:d156] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 

00:08.2 System peripheral [0880]: Intel Corporation Core Processor System 
Control and Status Registers [8086:d157] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 

00:08.3 System peripheral [0880]: Intel Corporation Core Processor 
Miscellaneous Registers [8086:d158] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- 
SERR- 
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci

00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI 
Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode])
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: 
Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI 
Express Root Port 2 [8086:3b44] (rev 05) (prog-if 00 [Normal decode])
Physical Slot: 1
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: 
Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI 
Express Root Port 3 [8086:3b46] (rev 05) (prog-if 00 [Normal decode])
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: 
 

Bug#920139: sddm: GTK and GNOME: Applications won't launch due error of glib2

[Adrian Immanuel Kiess]

Hello Bernhard,

when removing GSETTINGS_SCHEMA_DIR="/usr/share/glib-2.0/schemas/" from
/etc/environment the system still bails out that No GSettings schemas
are found.

Here the error message:

May 23 08:22:14 g6 at-spi-bus-launcher[16154]: dbus-daemon[16158]:
Successfully activated service 'org.a11y.atspi.Registry
'
May 23 08:22:14 g6 at-spi-bus-launcher[16154]: SpiRegistry daemon is
running with well-known name - org.a11y.atspi.Registr
y
May 23 08:22:14 g6 gnome-session[16073]: gnome-session-binary[16073]:
GLib-GIO-ERROR: No GSettings schemas are installed $
n the system
May 23 08:22:14 g6 gnome-session[16073]: aborting...
May 23 08:22:14 g6 gnome-session-binary[16073]: GLib-GIO-ERROR: No
GSettings schemas are installed on the system#012abort$
ng...
May 23 08:22:14 g6 kernel: [199581.568915] do_trap: 166 callbacks
suppressed
May 23 08:22:14 g6 kernel: [199581.568918] traps: gnome-session-
b[16073] trap int3 ip:7f6a30f3bca5 sp:7ffd095ea9d0 error:$
 in libglib-2.0.so.0.5800.3[7f6a30f03000+7e000]
May 23 08:22:15 g6 at-spi-bus-launcher[16154]: XIO:  fatal IO error 11
(Resource temporarily unavailable) on X server ":0$
May 23 08:22:15 g6 at-spi-bus-launcher[16154]:   after 21 requests
(21 known processed) with 0 events remaining.

apt-show-versions | grep No

returns roughly a hundred packages but no Gnome 3 related packages. 
Shall I try to remove all of these?

I fixed the error setting 

export XDG_DATA_DIRS=/usr/share/gnome:/usr/local/share/:/usr/share/

in /etc/environment. Finally it works again! I can log in from xdm to 
gnome-session.

All Gnome 3 applications seem to work fine again.

Maybe someone can forward this to the package maintainer who can fix the issue.

Thank you very much for your help!

Sincerely,

Adrian

-- 
With many greetings from Leipzig, Germany.
Adrian Immanuel Kieß 

Gothaer Straße 34
D-04155 Leipzig

Administrator & programmer
Unix ∧ Perl ∧ Java ∧ LaTeX

 — < adr...@kiess.onl >
 — https://www.kiess.onl
☕ — https://arosusi.kiess.onl
 — https://jexercise.kiess.onl

--SYSTEM--
echo "Your fortune cookie: " && /usr/games/fortune -c -s
> (fortunes) % Don't kiss an elephant on the lips today.

echo "KIESS.ONL uptime: " && /usr/bin/uptime
> 08:24:42 up 4 days, 3:31, 10 users, load average: 2.04, 2.24, 2.26


On Sat, 2019-04-27 at 09:59 +0200, Bernhard Übelacker wrote:
> Hello Adrian,
> so unfortunately it has still no clear error.
> 
> In your .xsession-errors is tcosmonitor mentioned.
> As this package got 2016 removed [1] from debian - do you
> have still installed tcosmonitor or tcosmonitor-common?
> 
> If yes, maybe that might cause some troubles?
> If no, which file tries to load "tcosmonitor.shared"?
> 
> Do you have other packages not contained in testing and
> any other sources.list, that may cause trouble?
> LANG=C apt-show-versions | grep No
> 
> Back in 2010, was this system installed from a
> regular debian installer?
> 
> Kind regards,
> Bernhard
> 
> [1] https://tracker.debian.org/pkg/tcosmonitor
> 


signature.asc
Description: This is a digitally signed message part

Bug#920139: sddm: GTK and GNOME: Applications won't launch due error of glib2

[Adrian Immanuel Kiess]

Hello Bernhard,

I get dropped back to xdm or sddm when I try to login to gnome-session. 

Attached to this message is the .xsession-errors log file of my guest
user.

Xorg.log says nothing special.

The error now seems to be that gnome-session can't find the DISPLAY
variable or the DISPLAY variable does not get set for gnome-session.

As I wrote before, login to other window managers as amiwm do actually
work.

But as I wrote before, all GTK and GNOME applications have issues or
errors after login was created through a display manager on my machine.

I have had a look into alle config files in /etc/X11 and the only thing
could be an old config file in /etc/X11/Xsession.d.

Here is the whole login of /var/log/syslog:

Apr 27 06:09:29 g6 systemd[1]: Created slice User Slice of UID 10003.
Apr 27 06:09:29 g6 systemd[1]: Starting User Runtime Directory
/run/user/10003...
Apr 27 06:09:29 g6 NetworkManager[917]: ((src/settings/nm-settings-
connection.c:361)): assertion '' f
ailed
Apr 27 06:09:29 g6 NetworkManager[917]: ((src/settings/nm-settings-
connection.c:361)): assertion '' f
ailed
Apr 27 06:09:29 g6 NetworkManager[917]: ((src/settings/nm-settings-
connection.c:361)): assertion '' f
ailed
Apr 27 06:09:29 g6 systemd[1]: Started User Runtime Directory
/run/user/10003.
Apr 27 06:09:29 g6 systemd[1]: Starting User Manager for UID 10003...
Apr 27 06:09:29 g6 systemd[22703]: Listening on GnuPG cryptographic
agent (ssh-agent emulation).
Apr 27 06:09:29 g6 systemd[22703]: Starting D-Bus User Message Bus
Socket.
Apr 27 06:09:29 g6 systemd[22703]: Listening on GnuPG cryptographic
agent and passphrase cache (restricted).
Apr 27 06:09:29 g6 systemd[22703]: Listening on GnuPG cryptographic
agent and passphrase cache (access for web
 browsers).
Apr 27 06:09:29 g6 systemd[22703]: Reached target Timers.
Apr 27 06:09:29 g6 systemd[22703]: Listening on Sound System.
Apr 27 06:09:29 g6 systemd[22703]: Listening on GnuPG network
certificate management daemon.
Apr 27 06:09:29 g6 systemd[22703]: Listening on GnuPG cryptographic
agent and passphrase cache.
Apr 27 06:09:29 g6 systemd[22703]: Reached target Paths.
Apr 27 06:09:29 g6 systemd[22703]: Listening on D-Bus User Message Bus
Socket.
Apr 27 06:09:29 g6 systemd[22703]: Reached target Sockets.
Apr 27 06:09:29 g6 systemd[22703]: Reached target Basic System.
Apr 27 06:09:29 g6 systemd[22703]: Reached target Default.
Apr 27 06:09:29 g6 systemd[22703]: Startup finished in 128ms.
Apr 27 06:09:29 g6 systemd[1]: Started User Manager for UID 10003.
Apr 27 06:09:29 g6 NetworkManager[917]: ((src/settings/nm-settings-
connection.c:361)): assertion '' f
ailed
Apr 27 06:09:29 g6 systemd[1]: Started Session 494 of user guest.
Apr 27 06:09:29 g6 NetworkManager[917]: ((src/settings/nm-settings-
connection.c:361)): assertion '' f
ailed
Apr 27 06:09:29 g6 NetworkManager[917]: ((src/settings/nm-settings-
connection.c:361)): assertion '' f
ailed
Apr 27 06:09:29 g6 systemd[22703]: Started D-Bus User Message Bus.
Apr 27 06:09:29 g6 dbus-daemon[22725]: [session uid=10003 pid=22725]
Activating via systemd: service name='org
.a11y.Bus' unit='at-spi-dbus-bus.service' requested by ':1.7'
(uid=10003 pid=22780 comm="/usr/lib/gnome-sessio
n/gnome-session-check-acceler")
Apr 27 06:09:29 g6 systemd[22703]: Starting Accessibility services
bus...
Apr 27 06:09:29 g6 dbus-daemon[22725]: [session uid=10003 pid=22725]
Successfully activated service 'org.a11y.
Bus'
Apr 27 06:09:29 g6 systemd[22703]: Started Accessibility services bus.
Apr 27 06:09:29 g6 at-spi-bus-launcher[22788]: dbus-daemon[22793]:
Activating service name='org.a11y.atspi.Reg
istry' requested by ':1.0' (uid=10003 pid=22780 comm="/usr/lib/gnome-
session/gnome-session-check-acceler")
Apr 27 06:09:29 g6 at-spi-bus-launcher[22788]: dbus-daemon[22793]:
Successfully activated service 'org.a11y.at
spi.Registry'
Apr 27 06:09:29 g6 at-spi-bus-launcher[22788]: SpiRegistry daemon is
running with well-known name - org.a11y.a
tspi.Registry
Apr 27 06:09:29 g6 gnome-session-binary[22717]: Entering running state
Apr 27 06:09:30 g6 gnome-session[22717]: Unable to init server: Could
not connect: Connection refused
Apr 27 06:09:30 g6 gnome-session-f[22809]: Cannot open display:
Apr 27 06:09:30 g6 systemd[22703]: Stopping D-Bus User Message Bus...
Apr 27 06:09:30 g6 at-spi2-registr[22795]: Failed to send session
response The connection is closed
Apr 27 06:09:30 g6 systemd[22703]: at-spi-dbus-bus.service: Succeeded.
Apr 27 06:09:30 g6 systemd[22703]: dbus.service: Succeeded.
Apr 27 06:09:30 g6 systemd[22703]: Stopped D-Bus User Message Bus.
Apr 27 06:09:30 g6 systemd[22703]: Started D-Bus User Message Bus.
Apr 27 06:09:30 g6 NetworkManager[917]: ((src/settings/nm-settings-
connection.c:361)): assertion '' f
ailed

Thank you very much for your kind attention.

Yours sincerely,

Adrian

-- 
With many greetings from Leipzig, Germany.
Adrian Immanuel Kieß 

Gothaer Straße 34
D-04155 Leipzig

Administrator & programmer
Unix ∧ Perl ∧ Java ∧ LaTeX

 — < adr...@kiess.onl >

Bug#920139: sddm: GTK and GNOME: Applications won't launch due error of glib2

[Adrian Immanuel Kiess]

Dear Bernhard,

after some updates to Debian/testing the old bug went away.

I try to login with my user guest with a clean home directory.

Now the error is:

Apr 26 03:39:35 g6 gnome-session-binary[9035]: Entering running state
Apr 26 03:39:35 g6 gnome-session[9035]: Unable to init server: Could
not connect: Connection refused
Apr 26 03:39:35 g6 gnome-session-f[9128]: Cannot open display:

Logging in into amiwm works fine though!

I also can't use a session created through xdm or a login manager
because a lot of GNOME and GTK complain or even seqfault and won't
start after creating a session through xdm.

Using a console login and startx, everything works fine though.

I suspect this is a general bug with login manager created X sessions.

I also have to note, this is is a installation from the year 2010,
always kept updated to newest Debian/testing. 

Maybe something broke meanwhile.

Does this read any package maintainer?

What could be the issue GNOME and GTK applications have when run
through a login manager session in current Debian/testing.

I also tried googling for this topic, but couldn't find any solution.

Here is the log from syslog:

Apr 26 03:39:34 g6 systemd[1]: Started User Manager for UID 10003.
Apr 26 03:39:34 g6 NetworkManager[917]: ((src/settings/nm-settings-
connection.c:361)): assertion '' f
ailed
Apr 26 03:39:34 g6 systemd[1]: Started Session 7 of user guest.
Apr 26 03:39:34 g6 NetworkManager[917]: ((src/settings/nm-settings-
connection.c:361)): assertion '' f
ailed
Apr 26 03:39:34 g6 NetworkManager[917]: ((src/settings/nm-settings-
connection.c:361)): assertion '' f
ailed
Apr 26 03:39:34 g6 systemd[9021]: Started D-Bus User Message Bus.
Apr 26 03:39:35 g6 dbus-daemon[9043]: [session uid=10003 pid=9043]
Activating via systemd: service name='org.a
11y.Bus' unit='at-spi-dbus-bus.service' requested by ':1.7' (uid=10003
pid=9098 comm="/usr/lib/gnome-session/g
nome-session-check-acceler")
Apr 26 03:39:35 g6 systemd[9021]: Starting Accessibility services
bus...
Apr 26 03:39:35 g6 dbus-daemon[9043]: [session uid=10003 pid=9043]
Successfully activated service 'org.a11y.Bu
s'
Apr 26 03:39:35 g6 systemd[9021]: Started Accessibility services bus.
Apr 26 03:39:35 g6 at-spi-bus-launcher[9107]: dbus-daemon[9112]:
Activating service name='org.a11y.atspi.Regis
try' requested by ':1.0' (uid=10003 pid=9098 comm="/usr/lib/gnome-
session/gnome-session-check-acceler")
Apr 26 03:39:35 g6 at-spi-bus-launcher[9107]: dbus-daemon[9112]:
Successfully activated service 'org.a11y.atsp
i.Registry'
Apr 26 03:39:35 g6 at-spi-bus-launcher[9107]: SpiRegistry daemon is
running with well-known name - org.a11y.at
spi.Registry
Apr 26 03:39:35 g6 gnome-session-binary[9035]: Entering running state
Apr 26 03:39:35 g6 gnome-session[9035]: Unable to init server: Could
not connect: Connection refused
Apr 26 03:39:35 g6 gnome-session-f[9128]: Cannot open display:

Thank you very much,

Adrian

-- 
With many greetings from Leipzig, Germany.
Adrian Immanuel Kieß 

Gothaer Straße 34
D-04155 Leipzig

Administrator & programmer
Unix ∧ Perl ∧ Java ∧ LaTeX

 — < adr...@kiess.onl >
 — https://www.kiess.onl
☕ — https://arosusi.kiess.onl
 — https://jexercise.kiess.onl

--SYSTEM--
echo "Your fortune cookie: " && /usr/games/fortune -c -s
> (men-women) % A beautiful woman is a blessing from Heaven, but a good cigar 
> is a smoke. -- Kipling

echo "KIESS.ONL uptime: " && /usr/bin/uptime
> 03:40:50 up 5 min, 3 users, load average: 1.43, 0.87, 0.40


On Mon, 2019-04-08 at 17:25 +0200, Bernhard Übelacker wrote:
> Hello Adrian,
> 
> > I don't have any of those old GNOME applications installed, you
> > mentioned.
> 
> Then these files should not be there I guess like e.g.:
> /usr/share/glib-2.0/schemas/org.gnome.EasyTAG.gschema.xml
> 
> On a system where e.g. easytag is installed a 'dpkg -S' returns this:
> $ dpkg -S /usr/share/glib-2.0/schemas/org.gnome.EasyTAG.gschema.xml
> easytag: /usr/share/glib-2.0/schemas/org.gnome.EasyTAG.gschema.xml
> 
> 
> However, if you suspect something of the environment may be wrong,
> you could try this:
> 
> - login through sddm
> env | sort > /home/user/env-enlightment.txt
> 
> - login through another login manager
> env | sort > /home/user/env-other.txt
> 
> - compare:
> diff -Nurp /home/user/env-other.txt /home/user/env-
> enlightment.txt
> 
> - then you may search if GSETTINGS_SCHEMA_DIR in the differences
> shown.
> 
> - or set the different variables one by one in a terminal by
> export VAR=value
> (call from there one of the crashing programs)
>   and check if that changes behaviour.
> 
> Kind regards,
> Bernhard
> 


signature.asc
Description: This is a digitally signed message part

Bug#920139: sddm: GTK and GNOME: Applications won't launch due error of glib2

[Adrian Immanuel Kiess]

Hello Bernhard,

yes, I still encounter this bug in Debian/testing (Buster).

I still can't login to a GNOME session using sddm.

Using startx and running gnome-session from ~/.xinitrc everything works
fine.

I suspect running the X session from a display manager some environment
variables do not get set correctly also. Because when I login to
Enlightenment DR17 through sddm I also have an error configuring
desktop-file-utils though apt.

Here is the error shown:

Processing triggers for desktop-file-utils (0.23-4) ...
dpkg: error processing package desktop-file-utils (--configure):
 installed desktop-file-utils package post-installation script
subprocess returned error exit status 1

Running apt via an login shell on the console everything works fine and the 
post-installation script succeeds.

I don't have any of those old GNOME applications installed, you mentioned.

I still wonder what could be the issue. 

Thanks for your help.

Yours sincerely,

Adrian

-- 
With many greetings from Leipzig, Germany.
Adrian Immanuel Kieß 

Gothaer Straße 34
D-04155 Leipzig

Administrator & programmer
Unix ∧ Perl ∧ Java ∧ LaTeX

 — < adr...@kiess.onl >
 — https://www.kiess.onl # Dem Ingenieur ist nichts zu schwör
☕ — https://arosusi.kiess.onl # Nickpage of Adrian Immanuel Kieß
 — https://outanekka.kiess.onl # Outanekka online imagery

--SYSTEM--
echo "Your fortune cookie: " && /usr/games/fortune -c -s
> (people) % Others can stop you temporarily, only you can do it permanently.

echo "KIESS.ONL uptime: " && /usr/bin/uptime
> 06:07:59 up 3 days, 23:43, 6 users, load average: 1.59, 1.60, 1.63


On Sat, 2019-03-16 at 16:47 +0100, Bernhard Übelacker wrote:
> 
> 
> Hello Adrian Immanuel,
> I am sorry for the late reply.
> 
> First a question: Do you still observe this fault?
> 
> 
> I took a look today inside the md5sums you supplied
> and tried to reproduce this setup inside a VM.
> 
> Unfortunately I found following old packages that are not
> packaged in Debian anymore or maybe not installed in the
> latest version:
> 
>   nautilus-pastebin: last built 2012, found just at
> snapshot.debian.org
>   geoclue: last in jessie
>   easytag: not in the lastest version?
>   command-runner-applet: last in jessie
>   gnome-search-tool: last in stretch
>   sflphone-gnome: last in stretch
> 
> Can you please have a look at these packages, if you
> really use them?
> If not you might uninstall them and test if you still
> can observe the not launching applications?
> 
> If you use synaptic, there should be a folder with outdated packages.
> 
> 
> However, I tried to put your gsettings.compiled into that VM
> and could login into GNOME and GNOME Classic sessions without
> hitting that fault (traps: gnome-session-b...).
> 
> Kind regards,
> Bernhard
> 


signature.asc
Description: This is a digitally signed message part

Bug#920139: sddm: GTK and GNOME: Applications won't launch due error of glib2

[Adrian Immanuel Kiess]

Dear Bernhard,

thank you for your message.

I have in fact installed gschemas.compiled:

root@g6 (/usr/share/glib-2.0/schemas) % ls -la |grep compiled
-rw-r--r-- 1 root root 557484 Feb  9 08:34 gschemas.compiled

I tried setting the environment variable in /etc/environment which did
not fix the issue. Still I can't login to a GNOME session from sddm or 
start any GTK/GNOME application when logging in to another window manager 
like FVWM. The shell says core dumped when trying to launch gedit for 
example.

I have installed gesettings-desktop-schemas version:

root@g6 (/usr/share/glib-2.0/schemas) % dpkg -l | grep gsettings-desktop-schemas
ii  gsettings-desktop-schemas   3.28.1-1
   all  GSettings desktop-wide schemas
ii  gsettings-desktop-schemas-dev:amd64 3.28.1-1
   amd64Development files for GSettings 
desktop-wide schemas

Do you now have an idea how to fix this bug?

Thank you very much in advance.

Yours sincerely,

Adrian

-- 
With many greetings from Leipzig, Germany.
Adrian Immanuel Kieß 

Gothaer Straße 34
D-04155 Leipzig

Administrator & programmer
Unix ∧ Perl ∧ Java ∧ LaTeX

 — < adr...@kiess.onl >
 — https://www.kiess.onl # Dem Ingenieur ist nichts zu schwör
☕ — https://arosusi.kiess.onl # Nickpage of Adrian Immanuel Kieß
 — https://outanekka.kiess.onl # Outanekka online imagery

--SYSTEM--
echo "Your fortune cookie: " && /usr/games/fortune -c -s
> (work) % Please keep your hands off the secretary's reproducing equipment.

echo "KIESS.ONL uptime: " && /usr/bin/uptime
> 09:55:54 up 14 min, 2 users, load average: 1.26, 0.80, 0.45


On Mon, 2019-02-04 at 23:44 +0100, Bernhard Übelacker wrote:
> Control: tags 920139 + moreinfo
> 
> 
> Hello Adrian,
> 
> Am 03.02.19 um 09:24 schrieb Adrian Immanuel Kiess:
> > The bug is, like I see it, that the applications cannot find the
> > gsettings schema directory.
> 
> From my point of view it might be more the file gschemas.compiled
> inside that directory. Does that exist on your system?
> 
> > When setting export GSETTINGS_SCHEMA_DIR="/usr/share/glib-
> > 2.0/schemas/" 
> > in my .xinitrc I can launch GTK and GNOME applications when the
> > xsession ist started with startx.
> > 
> > Therefor setting GSETTINGS_SCHEMA_DIR in /etc/environment maybe
> > fixes 
> > the issue, which I have not tried yet.
> 
> My previous test was inside a minimal buster amd64 VM where I
> installed
> just "systemd-coredump xserver-xorg sddm gnome-session" and there I
> can
> login in sddm to a "GNOME on Xorg" session without showing that
> problem.
> I searched that VM and could find no file setting that environment.
> 
> I tried renaming that file gschemas.compiled and setting the
> environment
> like you did - but I still got the trap.
> 
> Therefore you might also install a coredump collector
> like systemd-coredump.
> That way after such an unsuccessful logon attempt you can list with:
> 
> coredumpctl list
> 
> And produce an exact backtrace in which function that error is
> thrown by this command:
> 
> coredumpctl gdb [PID]
> bt
> 
> Best would be if debug symbol packages
> gnome-session-bin-dbgsym libglib2.0-0-dbgsym
> are installed like described in [1].
> 
> > Shall I resubmit the bug against gsettings-desktop-schemas package?
> 
> If you mean with resumit to create a new bug, that should not be
> needed
> as this bug can be reassigned to another package too.
> Which version of package gsettings-desktop-schemas have you
> installed?
> 
> dpkg -l | grep gsettings-desktop-schemas
> 
> Kind regards,
> Bernhard
> 
> [1] 
> https://wiki.debian.org/HowToGetABacktrace#Installing_the_debugging_symbols


signature.asc
Description: This is a digitally signed message part

Bug#920139: sddm: GTK and GNOME: Applications won't launch due error of glib2

[Adrian Immanuel Kiess]

Dear Bernhard,

thank you very much for your reply.

The bug is, like I see it, that the applications cannot find the
gsettings schema directory.

When setting export GSETTINGS_SCHEMA_DIR="/usr/share/glib-2.0/schemas/" 
in my .xinitrc I can launch GTK and GNOME applications when the
xsession ist started with startx.

Therefor setting GSETTINGS_SCHEMA_DIR in /etc/environment maybe fixes 
the issue, which I have not tried yet.

Shall I resubmit the bug against gsettings-desktop-schemas package?

Yours sincerely,

Adrian

-- 
With many greetings from Leipzig, Germany.
Adrian Immanuel Kieß 

Gothaer Straße 34
D-04155 Leipzig

Administrator & programmer
Unix ∧ Perl ∧ Java ∧ LaTeX

 — < adr...@kiess.onl >
 — https://www.kiess.onl # Dem Ingenieur ist nichts zu schwör
☕ — https://arosusi.kiess.onl # Nickpage of Adrian Immanuel Kieß
 — https://outanekka.kiess.onl # Outanekka online imagery

--SYSTEM--
echo "Your fortune cookie: " && /usr/games/fortune -c -s
> (goedel) % For 20 dollars, I'll give you a good fortune next time ...

echo "KIESS.ONL uptime: " && /usr/bin/uptime
> 09:18:19 up 12 days, 2:54, 4 users, load average: 1.39, 1.33, 1.68


On Thu, 2019-01-31 at 16:59 +0100, Bernhard Übelacker wrote:
> Hello Adrian Immanuel Kiess,
> I tried to search the net about this message:
> "GLib-GIO-ERROR: No GSettings schemas are installed on the
> system"
> 
> And found results pointing to .../share/glib-2.0/schemas/.
> Therefore renamed following file:
> /usr/share/glib-2.0/schemas/gschemas.compiled
> 
> And received on the next logon attempt a similar trap
> message as you did.
> 
> Therefore I assume this is based on this file missing or corrupt,
> and unrelated to the sddm package, but not sure to which package
> to reassign.
> 
> Are all packages in a configured state? Does following do any
> changes:
> apt install -f
> 
> I could trigger a recreation when the file was missing by e.g.:
> apt install --reinstall yelp
> 
> Were there any faults when installing/upgrading
> some gnome packages lately?
> Could you inspect this file on your system
> or let it be recreated?
> 
> Kind regards,
> Bernhard
> 
> 
> 
> root@debian:~# journalctl | grep traps -B4
> Jan 31 16:30:09 debian gnome-session[1233]: gnome-session-
> binary[1233]: GLib-GIO-ERROR: No GSettings schemas are installed on
> the system
> Jan 31 16:30:09 debian gnome-session[1233]: aborting...
> Jan 31 16:30:09 debian gnome-session-binary[1233]: GLib-GIO-ERROR: No
> GSettings schemas are installed on the system
>aborting...
> Jan 31 16:30:09 debian kernel: traps: gnome-session-b[1233] trap int3
> ip:7ff639d19be5 sp:7fff4eda4490 error:0 in libglib-
> 2.0.so.0.5800.2[7ff639ce1000+7e000]
> 
> 
> 
> (gdb) bt
> #0  0x7ff639d19be5 in _g_log_abort (breakpoint=1) at
> ../../../glib/gmessages.c:554
> #1  0x7ff639d1aefd in g_logv (log_domain=0x7ff639f6f4e7 "GLib-
> GIO", log_level=G_LOG_LEVEL_ERROR, format=, 
> args=args@entry=0x7fff4eda4560) at ../../../glib/gmessages.c:1371
> #2  0x7ff639d1b0cf in g_log (log_domain=log_domain@entry=0x7ff639
> f6f4e7 "GLib-GIO", log_level=log_level@entry=G_LOG_LEVEL_ERROR, 
> format=format@entry=0x7ff639f8e0d8 "No GSettings schemas are
> installed on the system") at ../../../glib/gmessages.c:1413
> #3  0x7ff639f1f171 in g_settings_set_property (object= out>, prop_id=, value=0x7fff4eda46c0, pspec= out>) at ../../../gio/gsettings.c:585
> #4  0x7ff639dfb8c9 in object_set_property (nqueue=0x561977752880,
> value=, pspec=0x561977747e50, object=0x561977743210)
> at ../../../gobject/gobject.c:1447
> #5  g_object_new_internal (class=class@entry=0x561977769520, 
> params=params@entry=0x7fff4eda47f0, n_params=n_params@entry=1) at
> ../../../gobject/gobject.c:1839
> #6  0x7ff639dfd3a4 in g_object_new_valist (object_type= out>, first_property_name=first_property_name@entry=0x7ff639f8dbf3
> "schema-id", var_args=var_args@entry=0x7fff4eda4940) at
> ../../../gobject/gobject.c:2128
> #7  0x7ff639dfd6d9 in g_object_new (object_type=, 
> first_property_name=first_property_name@entry=0x7ff639f8dbf3 "schema-
> id") at ../../../gobject/gobject.c:1648
> #8  0x7ff639f1f1c5 in g_settings_new (schema_id=schema_id@entry=0
> x561975bb51c5 "org.gnome.SessionManager") at
> ../../../gio/gsettings.c:965
> #9  0x561975ba7fec in gsm_manager_init (manager=0x56197776a100)
> at ../gnome-session/gsm-manager.c:3231
> #10 0x7ff639e190b7 in g_type_create_instance (type= out>) at ../../../gobject/gtype.c:1864
> #11 0x7ff639dfafe8 in g_object_constructor (type=,
> n_construct_properties=3

Bug#920139: sddm: GTK and GNOME: Applications won't launch due error of glib2

[Adrian Immanuel Kiess]

Package: sddm
Version: 0.18.0-1
Severity: important

Dear Maintainer,

currently in Debian/testing GNOME and GTK applications won't launch when the X
session is launched through sddm or xdm.

When trying to launch gnome-session through sddm the following glib2 and gnome-
settings-schema related error occurs:

Jan 22 06:24:53 g6 at-spi-bus-launcher[2919]: dbus-daemon[2923]: Activating
service name='
org.a11y.atspi.Registry' requested by ':1.0' (uid=10003 pid=2911
comm="/usr/lib/gnome-sess
ion/gnome-session-check-acceler")
Jan 22 06:24:53 g6 at-spi-bus-launcher[2919]: dbus-daemon[2923]: Successfully
activated se
rvice 'org.a11y.atspi.Registry'
Jan 22 06:24:53 g6 at-spi-bus-launcher[2919]: SpiRegistry daemon is running
with well-know
n name - org.a11y.atspi.Registry
Jan 22 06:24:53 g6 kernel: [   85.989074] traps: gnome-session-b[2854] trap
int3 ip:7fbb40
09dbe5 sp:7ffe6ab4af90 error:0 in libglib-2.0.so.0.5800.2[7fbb40065000+7e000]
Jan 22 06:24:53 g6 gnome-session[2854]: gnome-session-binary[2854]: GLib-GIO-
ERROR: No GSe
ttings schemas are installed on the system
Jan 22 06:24:53 g6 gnome-session[2854]: aborting...
Jan 22 06:24:53 g6 gnome-session-binary[2854]: GLib-GIO-ERROR: No GSettings
schemas are in
stalled on the system#012aborting...
Jan 22 06:24:53 g6 sddm-helper[2832]: [PAM] Closing session
Jan 22 06:24:53 g6 sddm-helper[2832]: [PAM] Ended.
Jan 22 06:24:53 g6 NetworkManager[1031]: ((src/settings/nm-settings-
connection.c:361)): as
sertion '' failed
Jan 22 06:24:53 g6 sddm[1582]: Auth: sddm-helper exited with 5
Jan 22 06:24:53 g6 at-spi-bus-launcher[2919]: XIO:  fatal IO error 11 (Resource
temporaril
y unavailable) on X server ":0"
Jan 22 06:24:53 g6 at-spi-bus-launcher[2919]:   after 21 requests (21 known
processed)
 with 0 events remaining.
Jan 22 06:24:53 g6 sddm[1582]: Socket server stopping...
Jan 22 06:24:53 g6 sddm[1582]: Socket server stopped.
Jan 22 06:24:53 g6 sddm[1582]: Display server stopping...

When launching a xession with xinit from the console GTK and GNOME apllication
due in fact launch and work.

I tried amiwm and fvvm through sddm and using xterm GTK and GNOME applications
won't launch without an error message.

The only error message I could capture is the error above when trying to launch
the gnome-session directly through sddm or xdm.

I would appriciate any advice. Thank you very much.

Yours Sincerely,

Adrian Immanuel Kieß



-- System Information:
Debian Release: buster/sid
  APT prefers testing
  APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.19.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), 
LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages sddm depends on:
ii  adduser   3.118
ii  debconf [debconf-2.0] 1.5.70
ii  libc6 2.28-5
ii  libgcc1   1:8.2.0-14
ii  libpam0g  1.1.8-4
ii  libqt5core5a  5.11.3+dfsg-2
ii  libqt5dbus5   5.11.3+dfsg-2
ii  libqt5gui55.11.3+dfsg-2
ii  libqt5network55.11.3+dfsg-2
ii  libqt5qml55.11.3-2
ii  libqt5quick5  5.11.3-2
ii  libstdc++68.2.0-14
ii  libsystemd0   240-4
ii  libxcb-xkb1   1.13.1-2
ii  libxcb1   1.13.1-2
ii  qml-module-qtquick2   5.11.3-2
ii  x11-common1:7.7+19
ii  xnest [xserver]   2:1.20.3-1
ii  xserver-xephyr [xserver]  2:1.20.3-1
ii  xserver-xorg [xserver]1:7.7+19
ii  xvfb [xserver]2:1.20.3-1

Versions of packages sddm recommends:
ii  haveged 1.9.1-6
ii  libpam-systemd  240-4
ii  sddm-theme-breeze [sddm-theme]  4:5.14.3-1+b1

Versions of packages sddm suggests:
ii  libpam-kwallet5   5.14.3-1
pn  qtvirtualkeyboard-plugin  

-- debconf information:
* shared/default-x-display-manager: sddm
  sddm/daemon_name: /usr/bin/sddm

Bug#906799: gnome-control-center: crashes or shows blank window when started outside GNOME

[Adrian Immanuel Kiess]

Package: gnome-control-center
Version: 1:3.30.2-1
Followup-For: Bug #906799

Dear Maintainer,

   * What led up to the situation?
 Upgrading the system
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 apt -u dist-upgrade
   * What was the outcome of this action?
 gnome-control-center won't start
   * What outcome did you expect instead?
 Working gnome-control-center

I can reproduce this bug in the current Debian/testing. gnome-control-center
fails to load as root and as normal user.

Error running as root:

g6# gnome-control-center
**
ERROR:../shell/cc-shell-model.c:458:cc_shell_model_set_panel_visibility:
assertion failed: (valid)
zsh: abort (core dumped)  gnome-control-center

Error running as user:

(gst-plugin-scanner:18923): GLib-GObject-WARNING **: 11:52:38.153: cannot
register existing type 'GstAggregator'

(gst-plugin-scanner:18923): GLib-CRITICAL **: 11:52:38.154: g_once_init_leave:
assertion 'result != 0' failed

(gst-plugin-scanner:18923): GLib-GObject-CRITICAL **: 11:52:38.154:
g_type_register_static: assertion 'parent_type > 0' failed

(gst-plugin-scanner:18923): GLib-GObject-CRITICAL **: 11:52:38.154:
g_type_add_interface_static: assertion 'G_TYPE_IS_INSTANTIATABLE
(instance_type)' failed

(gst-plugin-scanner:18923): GLib-CRITICAL **: 11:52:38.154: g_once_init_leave:
assertion 'result != 0' failed

..and so on.

I assume it has to issue with gstreamer somehow. I already deinstalled the old
gstreamer 0.10 leftovers but it did not resolve the problem.

Inside a gnome-session gnome-control-center also won't load. I have tested this
with GNOME session and Enlightenment 0.22 from Debian/testing.

To this message I have attached a small screencast to illustrate the problem.

Thank you kindly for your reply.

Yours Sincerely,

Adrian Immanuel Kiess






-- System Information:
Debian Release: buster/sid
  APT prefers testing
  APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.18.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8),
LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages gnome-control-center depends on:
ii  accountsservice0.6.45-1
ii  apg2.2.3.dfsg.1-5
ii  colord 1.4.3-3+b1
ii  desktop-file-utils 0.23-4
ii  gnome-control-center-data  1:3.30.2-1
ii  gnome-desktop3-data3.30.2-1
ii  gnome-settings-daemon  3.30.1.2-1
ii  gsettings-desktop-schemas  3.28.1-1
ii  libaccountsservice00.6.45-1
ii  libatk1.0-02.30.0-1
ii  libc6  2.27-8
ii  libcairo-gobject2  1.16.0-1
ii  libcairo2  1.16.0-1
ii  libcanberra-gtk3-0 0.30-6
ii  libcanberra0   0.30-6
ii  libcheese-gtk253.30.0-1
ii  libcheese8 3.30.0-1
ii  libclutter-1.0-0   1.26.2+dfsg-7
ii  libclutter-gtk-1.0-0   1.8.4-3
ii  libcolord-gtk1 0.1.26-2
ii  libcolord2 1.4.3-3+b1
ii  libcups2   2.2.9-2
ii  libfontconfig1 2.13.1-2
ii  libgdk-pixbuf2.0-0 2.38.0+dfsg-6
ii  libglib2.0-0   2.58.1-2
ii  libgnome-bluetooth13   3.28.2-2
ii  libgnome-desktop-3-17  3.30.2-1
ii  libgoa-1.0-0b  3.30.0-1
ii  libgoa-backend-1.0-1   3.30.0-1
ii  libgrilo-0.3-0 0.3.6-1
ii  libgtk-3-0 3.24.1-2
ii  libgtop-2.0-11 2.38.0-2
ii  libgudev-1.0-0 232-2
ii  libibus-1.0-5  1.5.19-1
ii  libkrb5-3  1.16.1-1
ii  libmm-glib01.8.2-1
ii  libnm0 1.14.4-3
ii  libnma01.8.18-2
ii  libpango-1.0-0 1.42.4-4
ii  libpangocairo-1.0-01.42.4-4
ii  libpolkit-gobject-1-0  0.105-21
ii  libpulse-mainloop-glib012.2-2
ii  libpulse0  12.2-2
ii  libpwquality1  1.4.0-2
ii  libsecret-1-0  0.18.6-3
ii  libsmbclient   2:4.9.2+dfsg-1
ii  libsoup2.4-1   2.64.1-3
ii  libupower-glib30.99.9-1
ii  libwacom2  0.31-1
ii  libwayland-server0 1.16.0-1
ii  libx11-6   2:1.6.7-1
ii  libxi6 2:1.7.9-1
ii  libxml22.9.4+dfsg1-7+b2

Versions of packages gnome-control-center recommends:
ii  cracklib-runtime  2.9.2-5.2+b1
ii  cups-pk-helper0.2.6-1+b1
ii  gkbd-capplet  3.26.0-3
ii  gnome-online-accounts 3.30.0-1
ii  gnome-user-docs   3.30.1-1
ii  gnome-user-share  3.28.0-1
ii  iso-codes 4.1-1
ii  libcanberra-pulse 0.30-6
ii  libnss-myhostname 239-13
ii  mousetweaks   3.12.0-4
ii  network-manager-gnome 1.8.18-2
ii  policyki

Bug#911517: gimp: Crashes at startup with symbol lookup error

[Adrian Immanuel Kiess]

Package: gimp
Version: 2.10.6-3
Severity: grave
Justification: renders package unusable

Dear Maintainer,

   * What led up to the situation?
 Updating the system
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 apt -u dist-upgrade
   * What was the outcome of this action?
 Gimp does not start or load properly
   * What outcome did you expect instead?
 Working Gimp installation

curently in Debian/testing gimp and xsane crashes at startup with:

gimp: symbol lookup error: /usr/lib/x86_64-linux-gnu/libgegl-0.4.so.0:
undefined symbol: babl_format_with_space

This bug was already comitted as bug #897226 but this bug was closed already
and the problem still persists.

Thank you very much in advance.

Sincerely,

Adrian Immanuel Kieß




-- System Information:
Debian Release: buster/sid
  APT prefers testing
  APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.18.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), 
LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages gimp depends on:
ii  gimp-data2.10.6-3
ii  libaa1   1.4p5-44+b2
ii  libbabl-0.1-01:0.1.28-dmo1
ii  libbz2-1.0   1.0.6-9
ii  libc62.27-6
ii  libcairo21.15.12-1
ii  libfontconfig1   2.13.1-1
ii  libfreetype6 2.8.1-2
ii  libgcc1  1:8.2.0-8
ii  libgdk-pixbuf2.0-0   2.38.0+dfsg-6
ii  libgegl-0.4-00.4.8-1+b1
ii  libgexiv2-2  0.10.8-1
ii  libgimp2.0   2.10.6-3
ii  libglib2.0-0 2.58.1-2
ii  libgs9   9.25~dfsg-2
ii  libgtk2.0-0  2.24.32-3
ii  libgudev-1.0-0   232-2
ii  libharfbuzz0b1.9.0-1
ii  libheif1 1.3.2-1+b1
ii  libilmbase23 2.2.1-2
ii  libjpeg62-turbo  1:1.5.2-2+b1
ii  liblcms2-2   2.9-3
ii  liblzma5 5.2.2-1.3
ii  libmng1  1.0.10+dfsg-3.1+b5
ii  libmypaint-1.3-0 1.3.0-2
ii  libopenexr23 2.2.1-4
ii  libopenjp2-7 2.3.0-1
ii  libpango-1.0-0   1.42.4-3
ii  libpangocairo-1.0-0  1.42.4-3
ii  libpangoft2-1.0-01.42.4-3
ii  libpng16-16  1.6.34-2
ii  libpoppler-glib8 0.69.0-2
ii  librsvg2-2   2.40.20-3
ii  libstdc++6   8.2.0-8
ii  libtiff5 4.0.9-6
ii  libwebp6 0.6.1-2
ii  libwebpdemux20.6.1-2
ii  libwebpmux3  0.6.1-2
ii  libwmf0.2-7  0.2.8.4-12
ii  libx11-6 2:1.6.7-1
ii  libxcursor1  1:1.1.15-1
ii  libxext6 2:1.3.3-1+b2
ii  libxfixes3   1:5.0.3-1
ii  libxmu6  2:1.1.2-2
ii  libxpm4  1:3.5.12-1
ii  xdg-utils1.1.3-1
ii  zlib1g   1:1.2.11.dfsg-1

Versions of packages gimp recommends:
ii  ghostscript  9.25~dfsg-2

Versions of packages gimp suggests:
ii  gimp-data-extras  1:2.0.2-1
ii  gimp-help-de [gimp-help]  2.8.2-1
ii  gimp-help-en [gimp-help]  2.8.2-1
ii  gimp-help-fr [gimp-help]  2.8.2-1
pn  gimp-python   
ii  gvfs-backends 1.38.0-2
ii  libasound21.1.6-1

-- no debconf information

Bug#907802: gnome-session: Login to Xorg session impossible using lightdm and sddm

[Adrian Immanuel Kiess]

Package: gnome-session-bin
Version: 3.28.1-1
Severity: normal

Dear Maintainer,

   * What led up to the situation?
 Upgrading the system
   * What was the outcome of this action?
 Login to GNOME session (Xorg) using a display manager such as lightdm and
sddm no longer works
   * What outcome did you expect instead?
 Working login to a GNOME session using a standard display manager

in Debian/testing I can't login to a Xorg GNOME session using a standard
display manager such as
lightdm or sddm for a certain time. Thishow I like to report this bug.

Login to a GNOME session (Xorg) works fine using xinit and .xinitrc from a
login to the console.
Also I can login to Enlightnment and twm from a display manager such as lightdm
and ssdm, which
works fine.

Login from a display manager using "GNOME" or "Default Xession" (which has exec
gnome-session at
the end) does not work.

Can you please have a look at this. I can't find any errors in .xsession-
errors. After supplying
the correct password the screen gets blank something tries to load and then I
get thrown back
to the login window of the display manager.

Thank you very much,

Adrian Immanuel Kieß




-- System Information:
Debian Release: buster/sid
  APT prefers testing
  APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.17.0-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), 
LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages gnome-session-bin depends on:
ii  dbus-x11 1.12.10-1
ii  dconf-gsettings-backend [gsettings-backend]  0.28.0-2
ii  gsettings-desktop-schemas3.28.0-1
ii  libc62.27-5
ii  libegl1  1.1.0-1
ii  libepoxy01.4.3-1
ii  libgl1   1.1.0-1
ii  libgles2 1.1.0-1
ii  libglib2.0-0 2.56.1-2
ii  libgnome-desktop-3-173.28.2-2
ii  libgtk-3-0   3.22.30-2
ii  libice6  2:1.0.9-2
ii  libjson-glib-1.0-0   1.4.2-4
ii  libsm6   2:1.2.2-1+b3
ii  libsystemd0  239-7
ii  libx11-6 2:1.6.6-1
ii  libxcomposite1   1:0.4.4-2
ii  upower   0.99.8-2
ii  xwayland 2:1.20.1-1

Versions of packages gnome-session-bin recommends:
ii  libpam-systemd  239-7

gnome-session-bin suggests no packages.

-- no debconf information

Bug#895868: munin-cron: Fontconfig error: failed reading config file

[Adrian Immanuel Kiess]

Package: munin
Version: 2.0.37-1
Followup-For: Bug #895868

Dear Maintainer,

likewise having this issue since the last upgrade within Debian/testing.

Here the e-mail I get continously:

From:   Cron Daemon 
To: r...@kiess.onl
Subject:Cron  if [ -x /usr/bin/munin-cron ]; then
/usr/bin/munin-cron; fi
Date:   Fri, 20 Apr 2018 07:10:52 +0200

Fontconfig error: failed reading config file
Fontconfig error: failed reading config file
Fontconfig error: failed reading config file
Fontconfig error: failed reading config file
Fontconfig error: failed reading config file

Sincerely greets,

Adrian Immanuel Kieß



-- System Information:
Debian Release: buster/sid
  APT prefers testing
  APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.15.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), 
LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages munin depends on:
ii  cron [cron-daemon]3.0pl1-130
ii  fonts-dejavu-core 2.37-1
ii  libdate-manip-perl6.70-1
pn  libdigest-md5-perl
ii  libfile-copy-recursive-perl   0.40-1
ii  libhtml-template-perl 2.97-1
ii  libio-socket-inet6-perl   2.72-2
ii  liblog-log4perl-perl  1.49-1
ii  libperl5.26 [libtime-hires-perl]  5.26.1-6
ii  librrds-perl  1.7.0-1+b1
pn  libstorable-perl  
ii  liburi-perl   1.73-1
ii  lsb-base  9.20170808
ii  munin-common  2.0.37-1
ii  perl  5.26.1-6
ii  rrdtool   1.7.0-1+b1
ii  systemd-sysv  238-4

Versions of packages munin recommends:
pn  libcgi-fast-perl  
ii  munin-doc 2.0.37-1
ii  munin-node2.0.37-1

Versions of packages munin suggests:
ii  apache2 [httpd]  2.4.29-2
ii  chromium [www-browser]   62.0.3202.89-1
ii  elinks [www-browser] 0.12~pre6-13
ii  firefox [www-browser]56.0-2
ii  konqueror [www-browser]  4:17.08.3-2
pn  libapache2-mod-fcgid 
ii  libnet-ssleay-perl   1.85-1
ii  links2 [www-browser] 2.14-5
ii  lynx [www-browser]   2.8.9dev17-1
ii  opera [www-browser]  12.16.1860
ii  w3m [www-browser]0.5.3-36

-- Configuration Files:
/etc/munin/apache.conf changed:
Alias /munin /var/cache/munin/www
Alias /munin-cgi/static /var/cache/munin/www/static
ScriptAlias /munin-cgi /usr/lib/cgi-bin/munin-cgi-html

Order allow,deny
Allow from 192.168.0.0/24 localhost 127.0.0.0/8 ::1
Options None
# This file can be used as a .htaccess file, or a part of your apache
# config file.
#
# For the .htaccess file option to work the munin www directory
# (/var/cache/munin/www) must have "AllowOverride all" or something 
# close to that set.
#
# AuthUserFile /etc/munin/munin-htpasswd
# AuthName "Munin"
# AuthType Basic
# require valid-user
# This next part requires mod_expires to be enabled.
#

# Set the default expiration time for files to 5 minutes 10 seconds from
# their creation (modification) time.  There are probably new files by
# that time. 
#

ExpiresActive On
ExpiresDefault M310

 

/etc/munin/munin.conf changed:
includedir /etc/munin/munin-conf.d
[g6.lan.dac]
   address 127.0.0.1
   use_node_name yes
[tdz2000.lan.dac]
address 192.168.0.2
use_node_name yes
[m2n.lan.dac]
address 192.168.0.7
use_node_name yes


-- no debconf information

Bug#883643: linux-image-4.13.0-1-amd64: HP Compaq LA1951g monitor: USB hub only works after reconnecting USB cable after startup

[Adrian Immanuel Kiess]

Package: src:linux
Version: 4.13.13-1
Severity: important

Dear Maintainer,

   * What led up to the situation?
 Using the built in USB hub of an HP Compaq LA1951g monitor
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 Starting up the system
   * What was the outcome of this action?
 USB hub of the HP Compaq LA1951g monitor only connected if pulling in and
out the USB cable after startup
   * What outcome did you expect instead?
 Working USB hub

in Debian/testing this bug is very old. Using an HP Compaq LA1951g monitor, the
built in USB hub only get's connected after startup if pulling in and out the
USB jack.

Thanks in advance.

Yours sincerely,

Adrian Immanuel Kieß



-- Package-specific info:
** Version:
Linux version 4.13.0-1-amd64 (debian-ker...@lists.debian.org) (gcc version 
6.4.0 20171112 (Debian 6.4.0-10)) #1 SMP Debian 4.13.13-1 (2017-11-16)

** Command line:
BOOT_IMAGE=/vmlinuz-4.13.0-1-amd64 
root=UUID=96d5fdb9-5d4e-46f2-89e3-34fcfc7bfe14 ro 
resume=UUID=3d740914-57bc-440c-843f-d15812ee3903 splash vga=795 splash vga=775

** Not tainted

** Kernel log:
Unable to read kernel log; any relevant messages should be attached

** Model information
sys_vendor: HP
product_name: ProLiant ML110 G6
product_version:
chassis_vendor: HP
chassis_version: N/A
bios_vendor: HP
bios_version: O27   
board_vendor: Wistron Corporation
board_name: ProLiant ML110 G6
board_version:

** Loaded modules:
uinput
xt_CHECKSUM
iptable_mangle
ipt_MASQUERADE
nf_nat_masquerade_ipv4
iptable_nat
nf_nat_ipv4
nf_nat
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
nf_conntrack
libcrc32c
ipt_REJECT
nf_reject_ipv4
xt_tcpudp
tun
bridge
stp
llc
rfcomm
ebtable_filter
ebtables
ip6table_filter
ip6_tables
iptable_filter
devlink
cpufreq_conservative
cpufreq_userspace
cpufreq_powersave
quota_v2
quota_tree
usblp
cmac
bnep
btusb
btrtl
btbcm
btintel
joydev
bluetooth
drbg
ansi_cprng
wacom
ecdh_generic
uas
rfkill
usb_storage
snd_usb_audio
snd_usbmidi_lib
snd_rawmidi
snd_seq_device
binfmt_misc
iTCO_wdt
iTCO_vendor_support
evdev
cuse
fuse
intel_powerclamp
loop
coretemp
ipmi_watchdog
kvm_intel
kvm
irqbypass
intel_cstate
intel_uncore
snd_hda_codec_hdmi
pcspkr
snd_hda_intel
snd_hda_codec
snd_hda_core
snd_hwdep
snd_pcm
amdgpu
snd_timer
snd
lpc_ich
sg
soundcore
mfd_core
shpchp
button
acpi_cpufreq
dm_mod
ipmi_si
ipmi_poweroff
ipmi_devintf
ipmi_msghandler
parport_pc
ppdev
lp
parport
nfsd
auth_rpcgss
nfs_acl
lockd
grace
sunrpc
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
fscrypto
ecb
crypto_simd
cryptd
glue_helper
aes_x86_64
btrfs
crc32c_generic
xor
raid6_pq
uhci_hcd
sr_mod
cdrom
sd_mod
hid_generic
usbhid
hid
ahci
libahci
libata
radeon
xhci_pci
i2c_algo_bit
ehci_pci
tg3
ptp
xhci_hcd
ehci_hcd
crc32c_intel
scsi_mod
i2c_i801
drm_kms_helper
pps_core
libphy
ttm
usbcore
usb_common
drm


-- System Information:
Debian Release: buster/sid
  APT prefers testing
  APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.13.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), 
LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.13.0-1-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.130
ii  kmod24-1
ii  linux-base  4.5

Versions of packages linux-image-4.13.0-1-amd64 recommends:
pn  apparmor 
ii  firmware-linux-free  3.4
ii  irqbalance   1.2.0-0.2

Versions of packages linux-image-4.13.0-1-amd64 suggests:
ii  debian-kernel-handbook  1.0.18
ii  extlinux3:6.03+dfsg1-2
ii  grub-pc 2.02-2
pn  linux-doc-4.13  

Versions of packages linux-image-4.13.0-1-amd64 is related to:
ii  firmware-amd-graphics 20170823-1
pn  firmware-atheros  
pn  firmware-bnx2 
pn  firmware-bnx2x
pn  firmware-brcm80211
pn  firmware-cavium   
pn  firmware-intel-sound  
pn  firmware-intelwimax   
pn  firmware-ipw2x00  
pn  firmware-ivtv 
pn  firmware-iwlwifi  
pn  firmware-libertas 
ii  firmware-linux-nonfree20170823-1
ii  firmware-misc-nonfree 20170823-1
pn  firmware-myricom  
pn  firmware-netxen   
pn  firmware-qlogic   
ii  firmware-realtek  20170823-1
pn  firmware-samsung  
pn  firmware-siano
pn  firmware-ti-connectivity  
pn  xen-hypervisor

-- no debconf information

Bug#881155: e17: Won't start correctly any longer, corrupted windows shown

[Adrian Immanuel Kiess]

Package: e17
Version: 0.17.6-1.1+b1
Severity: grave
Justification: renders package unusable

Dear Maintainer,

   * What led up to the situation?
 Using E17.
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 startx or login with XDM.
   * What was the outcome of this action?
 Currupted window display after login into E17.
   * What outcome did you expect instead?
 Working E17 window manager.

currently in Debian/testing the E17 window manager won't load correctly any
longer.

I tried with a default .e config and my own .e configuration.

The application windows won't show up correctly any longer after login.

Thank you very much in advance,

Yours Adrian Immanuel Kieß
http://immanuelK.net





-- System Information:
Debian Release: buster/sid
  APT prefers testing
  APT policy: (900, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.13.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), 
LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages e17 depends on:
ii  dbus-x11   1.12.0-1
ii  e17-data   0.17.6-1.1
ii  libasound2 1.1.3-5
ii  libc6  2.24-17
ii  libdbus-1-31.12.0-1
ii  libecore-con1  1.8.6-2.5+b2
ii  libecore-evas1 1.8.6-2.5+b2
ii  libecore-file1 1.8.6-2.5+b2
ii  libecore-imf1  1.8.6-2.5+b2
ii  libecore-input11.8.6-2.5+b2
ii  libecore-ipc1  1.8.6-2.5+b2
ii  libecore-x11.8.6-2.5+b2
ii  libecore1  1.8.6-2.5+b2
ii  libedbus1  1.7.10-1+b2
ii  libedje-bin1.8.6-2.5+b2
ii  libedje1   1.8.6-2.5+b2
ii  libeet11.8.6-2.5+b2
ii  libeeze1   1.8.6-2.5+b2
ii  libefreet-bin  1.8.6-2.5+b2
ii  libefreet1a1.8.6-2.5+b2
ii  libeina1   1.8.6-2.5+b2
ii  libeio11.8.6-2.5+b2
ii  libevas1   1.8.6-2.5+b2
ii  libevas1-engines-x [libevas1-engine-software-x11]  1.8.6-2.5+b2
ii  libpam0g   1.1.8-3.6
ii  libxcb-keysyms10.4.0-1+b2
ii  libxcb-shape0  1.12-1
ii  libxcb11.12-1

Versions of packages e17 recommends:
ii  pm-utils  1.4.1-17

e17 suggests no packages.

-- no debconf information

Bug#855437: g-brief2.cls: Error on compile with LyX

[Adrian Immanuel Kiess]

Package: texlive-latex-extra
Version: 2016.20170123-3
Severity: normal

Dear Maintainer,

   * What led up to the situation?
 Compile g-brief2 letter with LyX
   * What exactly did you do (or not do) that was effective (or
 In LyX: Document->View as pdflatex
 ineffective)?
   * What was the outcome of this action?
 LaTeX error: No counter blockzahl defined
   * What outcome did you expect instead?
 Working compile of g-brief2 letter

in the current texlive-latex-extra package of Debian/testing there is still a
bogous version of g-brief2.cls in the repositories.

Trying to compile a g-bief2 letter with LyX results in this error:

LaTeX error: No counter blockzahl defined

I attached a fixed version of g-brief2.cls as g-brief2.cls.adrian to this
report.

Thank you very much.

Sincerely,

Adrian Immanuel Kieß
http://www.immanuelK.net





-- Package-specific info:
IMPORTANT INFORMATION: We will only consider bug reports concerning
the packaging of TeX Live as relevant. If you have problems with
combination of packages in a LaTeX document, please consult your
local TeX User Group, the comp.text.tex user group, the author of
the original .sty file, or any other help resource. 

In particular, bugs that are related to up-upstream, i.e., neither
Debian nor TeX Live (upstream), but the original package authors,
will be closed immediately.

   *** The Debian TeX Team is *not* a LaTeX Help Desk ***

If you report an error when running one of the TeX-related binaries 
(latex, pdftex, metafont,...), or if the bug is related to bad or wrong
output, please include a MINIMAL example input file that produces the
error in your report.

Please run your example with
(pdf)latex -recorder ...
(or any other program that supports -recorder) and send us the generated
file with the extension .fls, it lists all the files loaded during
the run and can easily explain problems induced by outdated files in
your home directory.

Don't forget to also include minimal examples of other files that are 
needed, e.g. bibtex databases. Often it also helps
to include the logfile. Please, never send included pictures!

If your example file isn't short or produces more than one page of
output (except when multiple pages are needed to show the problem),
you can probably minimize it further. Instructions on how to do that
can be found at

http://www.minimalbeispiel.de/mini-en.html (english)

or 

http://www.minimalbeispiel.de/mini.html (german)

##
minimal input file


##
other files

##
 List of ls-R files

-rw-r--r-- 1 root root 4135 Feb 18 06:46 /var/lib/texmf/ls-R
-rw-rw-r-- 1 root staff 80 Apr 16  2015 /usr/local/share/texmf/ls-R
lrwxrwxrwx 1 root root 29 Jan 17 03:45 /usr/share/texmf/ls-R -> 
/var/lib/texmf/ls-R-TEXMFMAIN
lrwxrwxrwx 1 root root 31 Feb 12 12:04 /usr/share/texlive/texmf-dist/ls-R -> 
/var/lib/texmf/ls-R-TEXLIVEDIST
lrwxrwxrwx 1 root root 31 Feb 12 12:04 /usr/share/texlive/texmf-dist/ls-R -> 
/var/lib/texmf/ls-R-TEXLIVEDIST
##
 Config files
-rw-r--r-- 1 root root 1293 Jan 28 08:04 /etc/texmf/web2c/texmf.cnf
lrwxrwxrwx 1 root root 33 Feb 12 12:04 /usr/share/texmf/web2c/fmtutil.cnf -> 
/var/lib/texmf/fmtutil.cnf-DEBIAN
lrwxrwxrwx 1 root root 32 Feb 12 12:04 /usr/share/texmf/web2c/updmap.cfg -> 
/var/lib/texmf/updmap.cfg-DEBIAN
-rw-r--r-- 1 root root 3300 Feb 18 06:46 
/var/lib/texmf/tex/generic/config/language.dat
##
 Files in /etc/texmf/web2c/
total 8
-rw-r--r-- 1 root root  283 Nov 10  2008 mktex.cnf
-rw-r--r-- 1 root root 1293 Jan 28 08:04 texmf.cnf
##
 md5sums of texmf.d
ca40c66f144b4bafc3e59a2dd32ecb9c  /etc/texmf/texmf.d/00debian.cnf
d588a08518f705d06ac262acd78f2bc4  /etc/texmf/texmf.d/20xmltex.cnf
055e06548bac99958d8ab2dd1248f2b4  /etc/texmf/texmf.d/80tex4ht.cnf

-- System Information:
Debian Release: 9.0
  APT prefers testing
  APT policy: (900, 'testing'), (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.9.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages texlive-latex-extra depends on:
ii  preview-latex-style11.90-1
ii  tex-common 6.06
ii  texlive-base   2016.20170123-3
ii  texlive-binaries   2016.20160513.41080.dfsg-1
ii  texlive-latex-recommended  2016.20170123-3
ii  texlive-pictures   2016.20170123-3

Versions of packages texlive-latex-extra recommends:
ii  texlive-fonts-recommended  2016.20170123-3
ii  texlive-generic-extra  2016.20170123-3
ii  texlive-latex-extra-doc2016.20170123-3

Versions of packages texlive-latex-extra suggests:
ii  libfile-which-perl  1.21-1
pn  libspreadsheet-parseexcel-perl  
ii  python-pygments

Bug#855436: e17: Newer version of Enlightenment in Debian/testing

[Adrian Immanuel Kiess]

Package: e17
Version: 0.17.6-1.1
Severity: wishlist

Dear Maintainer,

would it be possible to have a newer version of Enlightenment in
Debian/testing?

I already suggested this once.

The V17 of Enlightenment is quite outdated and it would be nice to have a newer
version in the repositories.

Thank you very much for your time.

Sincerely,

Adrian Immanuel Kieß
http://www.immanuelK.net



-- System Information:
Debian Release: 9.0
  APT prefers testing
  APT policy: (900, 'testing'), (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.9.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages e17 depends on:
ii  dbus-x11   1.10.14-1
ii  e17-data   0.17.6-1.1
ii  libasound2 1.1.3-4
ii  libc6  2.24-9
ii  libdbus-1-31.10.14-1
ii  libecore-con1  1.8.6-2.5+b1
ii  libecore-evas1 1.8.6-2.5+b1
ii  libecore-file1 1.8.6-2.5+b1
ii  libecore-imf1  1.8.6-2.5+b1
ii  libecore-input11.8.6-2.5+b1
ii  libecore-ipc1  1.8.6-2.5+b1
ii  libecore-x11.8.6-2.5+b1
ii  libecore1  1.8.6-2.5+b1
ii  libedbus1  1.7.10-1
ii  libedje-bin1.8.6-2.5+b1
ii  libedje1   1.8.6-2.5+b1
ii  libeet11.8.6-2.5+b1
ii  libeeze1   1.8.6-2.5+b1
ii  libefreet-bin  1.8.6-2.5+b1
ii  libefreet1a1.8.6-2.5+b1
ii  libeina1   1.8.6-2.5+b1
ii  libeio11.8.6-2.5+b1
ii  libevas1   1.8.6-2.5+b1
ii  libevas1-engines-x [libevas1-engine-software-x11]  1.8.6-2.5+b1
ii  libpam0g   1.1.8-3.5
ii  libxcb-keysyms10.4.0-1
ii  libxcb-shape0  1.12-1
ii  libxcb11.12-1

Versions of packages e17 recommends:
ii  pm-utils  1.4.1-17

e17 suggests no packages.

-- no debconf information

Bug#846835: bluetooth: Sennheiser MM400-X headset delayed sound using pulseaudio

[Adrian Immanuel Kiess]

Package: bluetooth
Version: 5.43-1
Severity: normal

Dear Maintainer,

   * What led up to the situation?
 Playing audio on my Sennheiser MM400-X bluetooth headset
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 Pair connection with Gnome Bluetooth or Blueman and play audio with
mplayer or rhythmbox
   * What was the outcome of this action?
 Working sound, but after some hours active bluetooth connection the sound
has up to three seconds delay
   * What outcome did you expect instead?
 No audio delay in playback

in Debian/testing my Senndheiser MM400-X bluetooth headset works fine, but
after certain time of an active connection the audio played back via pulseaudio
has an up to three second delay.

Additionaly the connection gets lost maybe all three to six hours active
connection.

I hope it is possible to fine tune the Linux bluetooth stack against my used
configuration.

Thank you very much in advance.

With many greetings,

Adrian Immanuel Kieß
http://www.immanuelk.net




-- System Information:
Debian Release: stretch/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.8.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages bluetooth depends on:
ii  bluez  5.43-1

bluetooth recommends no packages.

Versions of packages bluetooth suggests:
ii  bluez-cups   5.43-1
ii  bluez-obexd  5.43-1

-- no debconf information

Bug#846408: brasero: Burning Blu-Ray: HL-DT-ST BD-RE BH16NS55 (1.00) fails to burn Blu-Ray

[Adrian Immanuel Kiess]

Package: brasero
Version: 3.12.1-4
Severity: normal

Dear Maintainer,

   * What led up to the situation?
 Try to burn data Blu-Ray with brasero using a HL-DT-ST BD-RE  BH16NS55
(1.00) burner
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 Insert blanc Blu-Ray and hit "burn" button
   * What was the outcome of this action?
 Error message that burning failed
   * What outcome did you expect instead?
 brasero burning a data Blu-Ray

burning a data Blu-Ray within Debian/testing using brasero currently fails.

The hardware is as following:

root@g6 (~) % hwinfo --cdrom
27: SCSI 500.0: 10602 CD-ROM (DVD)
  [Created at block.249]
  Unique ID: KD9E.9bpIAC0VFM6
  Parent ID: w7Y8.9Y91nXK0sjC
  SysFS ID: /class/block/sr0
  SysFS BusID: 5:0:0:0
  SysFS Device Link:
/devices/pci:00/:00:1f.2/ata6/host5/target5:0:0/5:0:0:0
  Hardware Class: cdrom
  Model: "HL-DT-ST BD-RE  BH16NS55"
  Vendor: "HL-DT-ST"
  Device: "BD-RE  BH16NS55"
  Revision: "1.00"
  Driver: "ahci", "sr"
  Driver Modules: "ahci", "sr_mod"
  Device File: /dev/sr0 (/dev/sg6)
  Device Files: /dev/sr0, /dev/cdrom, /dev/cdrw, /dev/disk/by-id/ata-HL-DT-
ST_BD-RE_BH16NS55_SIK95FAF8300, /dev/disk/by-path/pci-:00:1f.2-ata-6,
/dev/dvd, /dev/dvdrw
  Device Number: block 11:0 (char 21:6)
  Features: CD-R, CD-RW, DVD, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL,
BD, BD-R, BD-RE, DVD-RAM
  Drive status: no medium
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #18 (SATA controller)
  Drive Speed: 48

Thank you very much in advance.

With many greetings,

Adrian Immanuel Kieß
http://www.immanuelK.net




-- System Information:
Debian Release: stretch/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.8.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages brasero depends on:
ii  brasero-common  3.12.1-4
ii  gstreamer1.0-plugins-base   1.10.1-1
ii  gvfs1.30.2-2
ii  libbrasero-media3-1 3.12.1-4
ii  libc6   2.24-5
ii  libcairo2   1.14.6-1.1
ii  libgdk-pixbuf2.0-0  2.36.0-1
ii  libglib2.0-02.50.2-2
ii  libgstreamer-plugins-base1.0-0  1.10.1-1
ii  libgstreamer1.0-0   1.10.1-1
ii  libgtk-3-0  3.22.4-1
ii  libnautilus-extension1a 3.22.1-2
ii  libpango-1.0-0  1.40.3-3
ii  libtotem-plparser18 3.10.7-1
ii  libtracker-sparql-1.0-0 1.10.1-1
ii  libxml2 2.9.4+dfsg1-2.1

Versions of packages brasero recommends:
ii  brasero-cdrkit  3.12.1-4
ii  yelp3.22.0-1

Versions of packages brasero suggests:
ii  libdvdcss2  1.4.0-dmo1
ii  tracker 1.10.1-1
ii  vcdimager   0.7.24+dfsg-0.2

-- no debconf information

Bug#843843: linux-kernel: Transcend USB 3.0 PCIE card reports ERROR Transfer event

[Adrian Immanuel Kiess]

Package: linux-kernel
Version: linux-image
Severity: normal

Dear Maintainer,

   * What led up to the situation?
 Transfering large data sets to USB 3.0 hard drive connected to Transcend
USB 3.0 adapter
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 Running storebackup
   * What was the outcome of this action?
 Kernel (syslog) reports ERROR Transfer event for disabled endpoint or
incorrect stream ring
   * What outcome did you expect instead?
 No message in syslog

when running my daily backup with storebackup.pl to an USB 3.0 Seagate drive
connected over an Transcend USB 3.0 controller syslog repeatedly reports the
following error:

Nov  9 22:30:35 g6 kernel: [1612362.282588] xhci_hcd :10:00.0: ERROR
Transfer event for disabled endpoint or incorrect stream ring
Nov  9 22:30:35 g6 kernel: [1612362.282595] xhci_hcd :10:00.0:
@000428ec1dc0   1b00 07038000
Nov  9 22:31:40 g6 kernel: [1612427.289774] xhci_hcd :10:00.0: ERROR
Transfer event for disabled endpoint or incorrect stream ring
Nov  9 22:31:40 g6 kernel: [1612427.289780] xhci_hcd :10:00.0:
@000428ec12a0   1b00 07038000
Nov  9 22:32:45 g6 kernel: [1612492.285646] xhci_hcd :10:00.0: ERROR
Transfer event for disabled endpoint or incorrect stream ring
Nov  9 22:32:45 g6 kernel: [1612492.285656] xhci_hcd :10:00.0:
@000428ec1780   1b00 07038001
Nov  9 22:33:50 g6 kernel: [1612557.313806] xhci_hcd :10:00.0: ERROR
Transfer event for disabled endpoint or incorrect stream ring
Nov  9 22:33:50 g6 kernel: [1612557.313812] xhci_hcd :10:00.0:
@000428ec1c60   1b00 07038000
Nov  9 22:34:55 g6 kernel: [1612622.273893] xhci_hcd :10:00.0: ERROR
Transfer event for disabled endpoint or incorrect stream ring
Nov  9 22:34:55 g6 kernel: [1612622.273899] xhci_hcd :10:00.0:
@000428ec1130   1b00 07038000

Thank you very much for your efforts.

Sincerely,

Adrian Immanuel Kiess
http://www.immanuelK.net



-- System Information:
Debian Release: stretch/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.7.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Bug#775369: e17: Upstream version

[Adrian Immanuel Kiess]

Package: e17
Version: 0.17.6-1
Followup-For: Bug #775369

Dear Maintainer,

when will there be newer Enlightenment version avaiable in Debian(/testing)? It
would be great to have a newer version avaiable.

Are there any plans so far?

Thank you very much for your time,

Adrian Immanuel Kieß
http://www.immanuelK.net



-- System Information:
Debian Release: stretch/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.6.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages e17 depends on:
ii  dbus-x11   1.10.8-1
ii  e17-data   0.17.6-1
ii  libasound2 1.1.1-2
ii  libc6  2.23-2
ii  libdbus-1-31.10.8-1
ii  libecore-con1  1.8.6-2.5+b1
ii  libecore-evas1 1.8.6-2.5+b1
ii  libecore-file1 1.8.6-2.5+b1
ii  libecore-imf1  1.8.6-2.5+b1
ii  libecore-input11.8.6-2.5+b1
ii  libecore-ipc1  1.8.6-2.5+b1
ii  libecore-x11.8.6-2.5+b1
ii  libecore1  1.8.6-2.5+b1
ii  libedbus1  1.7.10-1
ii  libedje-bin1.8.6-2.5+b1
ii  libedje1   1.8.6-2.5+b1
ii  libeet11.8.6-2.5+b1
ii  libeeze1   1.8.6-2.5+b1
ii  libefreet-bin  1.8.6-2.5+b1
ii  libefreet1a1.8.6-2.5+b1
ii  libeina1   1.8.6-2.5+b1
ii  libeio11.8.6-2.5+b1
ii  libevas1   1.8.6-2.5+b1
ii  libevas1-engines-x [libevas1-engine-software-x11]  1.8.6-2.5+b1
ii  libpam0g   1.1.8-3.3
ii  libxcb-keysyms10.4.0-1
ii  libxcb-shape0  1.11.1-1
ii  libxcb11.11.1-1

Versions of packages e17 recommends:
ii  pm-utils  1.4.1-16

e17 suggests no packages.

-- no debconf information

Bug#815319: After update dhcpd server don't start

[Adrian Immanuel Kiess]

Package: isc-dhcp-server
Version: 4.3.4-1
Followup-For: Bug #815319

Dear Maintainer,

   * What led up to the situation?
 Upgrading isc-dhcp-server
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 apt -u dist-upgrade
   * What was the outcome of this action?
 dhcpd won't be started after boot process or using service isc-dhcp-server
restart
   * What outcome did you expect instead?
 Running dhcpd service

I can confirm this bug.

After upgrading isc-dhcp-server it won't be executed after boot process or
using $ service isc-dhcp-server restart.

The solution to make it work again, I found from another bug report, is the
following:

In /etc/default/isc-dhcp-server

Change

INTERFACES=""

to

INTERFACESv4="eth0 virbr0"

Now $ service isc-dhcp-server restart works again.

But I guess this is just a workaround and thus it is not possible to let dhcpd
listen automatically to all interfaces by leaving INTERFACES variable with "".

Thank you very much for your time and reading this!

With many greetings,

Adrian Immanuel Kieß
http://www.immanuelK.net



-- System Information:
Debian Release: stretch/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.5.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages isc-dhcp-server depends on:
ii  debconf [debconf-2.0]  1.5.59
ii  debianutils4.7
ii  libc6  2.22-7
ii  libdns-export162   1:9.10.3.dfsg.P4-8
ii  libirs-export141   1:9.10.3.dfsg.P4-8
ii  libisc-export160   1:9.10.3.dfsg.P4-8
ii  lsb-base   9.20160110

Versions of packages isc-dhcp-server recommends:
ii  isc-dhcp-common  4.3.4-1
ii  policycoreutils  2.4-4

Versions of packages isc-dhcp-server suggests:
pn  isc-dhcp-server-ldap  

-- Configuration Files:
/etc/dhcp/dhcpd.conf changed:
allow booting;
allow bootp;
authoritative;
option domain-name-servers 192.168.0.3;
option domain-name "lan.dac";
option routers 192.168.0.2;
option subnet-mask 255.255.0.0;
option broadcast-address 192.168.255.255;
option ntp-servers 192.168.0.3;  
option time-servers 192.168.0.3;
option www-server 192.168.0.3;
option x-display-manager 192.168.0.3;
default-lease-time 6000;
max-lease-time 72000;
server-name "g6.lan.dac";
option wpad code 252 = text;
option wpad "http://wpad.lan.dac/proxy.pac\n;;
subnet 192.168.0.0 netmask 255.255.0.0 {
  range 192.168.0.20 192.168.0.30;
 #class "pxeclients" {
 #  match if substring (option vendor-class-identifier, 0, 9) = "PXEClient";
 #  option vendor-class-identifier "PXEClient";
 #  vendor-option-space PXE;
 #  option PXE.mtftp-ip 0.0.0.0;
 #  filename "pxeboot_ia32.bin";
 #  next-server 192.168.0.3;
 #  }
}
  #hardware ethernet 00:0E:0C:2C:7B:8A;
  #hardware ethernet 00:02:B3:9C:31:5C;
host g6 {
  hardware ethernet 64:31:50:d3:c0:f8;
  fixed-address 192.168.0.3;
  option host-name "g6";
  next-server 192.168.0.3;
  always-reply-rfc1048 true;
}
host tdz2000 {
  #hardware ethernet 00:90:27:6f:43:2b; 
  #hardware ethernet 00:02:b3:9c:31:5c; 
  #hardware ethernet 00:0E:0C:2C:7B:8A;
  hardware ethernet 00:0E:0C:2C:75:10;
  fixed-address 192.168.0.2;
  option host-name "tdz2000";
  #server-name "g6.lan.dac";
  next-server 192.168.0.3;
  filename "pxeboot_ia32.bin";
  #always-reply-rfc1048 true;
  option root-path "/client/tdz2000/root";

}
host m2n {
  hardware ethernet 00:0C:6E:81:35:E8;
  fixed-address 192.168.0.7;
  option host-name "m2n";
  #filename "pxelinux.0";
  next-server 192.168.0.3;
}


-- debconf information:
  isc-dhcp-server/interfaces:
  isc-dhcp-server/config_warn:

Bug#775369: e17: Upstream version

[Adrian Immanuel Kiess]

Package: e17
Version: 0.17.6-1
Followup-For: Bug #775369

Dear Maintainer,

I'd like to enqueue in that a new Enlightenment version should be made avaiable
to the Debian users.

There is already Enlightenment version 0.20 avaiable and it would be very nice
to have that avaiable from Debian repositories.

I'm using Enlightenment version 0.17 since it is avaiable within Debian and
like to note what usable and great window manager it became.

For all those of us for those GNOME does not offer enough features and options
one has to reach for an alternative such as Enlightenment.

Thank you very much for your efforts!

With many greetings,

Adrian Immanuel Kieß
http://www.immanuelK.net



-- System Information:
Debian Release: stretch/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.5.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages e17 depends on:
ii  dbus-x11   1.10.8-1
ii  e17-data   0.17.6-1
ii  libasound2 1.1.0-1
ii  libc6  2.22-7
ii  libdbus-1-31.10.8-1
ii  libecore-con1  1.8.6-2.5+b1
ii  libecore-evas1 1.8.6-2.5+b1
ii  libecore-file1 1.8.6-2.5+b1
ii  libecore-imf1  1.8.6-2.5+b1
ii  libecore-input11.8.6-2.5+b1
ii  libecore-ipc1  1.8.6-2.5+b1
ii  libecore-x11.8.6-2.5+b1
ii  libecore1  1.8.6-2.5+b1
ii  libedbus1  1.7.10-1
ii  libedje-bin1.8.6-2.5+b1
ii  libedje1   1.8.6-2.5+b1
ii  libeet11.8.6-2.5+b1
ii  libeeze1   1.8.6-2.5+b1
ii  libefreet-bin  1.8.6-2.5+b1
ii  libefreet1a1.8.6-2.5+b1
ii  libeina1   1.8.6-2.5+b1
ii  libeio11.8.6-2.5+b1
ii  libevas1   1.8.6-2.5+b1
ii  libevas1-engines-x [libevas1-engine-software-x11]  1.8.6-2.5+b1
ii  libpam0g   1.1.8-3.2
ii  libxcb-keysyms10.4.0-1
ii  libxcb-shape0  1.11.1-1
ii  libxcb11.11.1-1

Versions of packages e17 recommends:
ii  pm-utils  1.4.1-16

e17 suggests no packages.

-- no debconf information

Bug#823022: linux-image-4.5.0-1-amd64: Asus MyCinema U3100 Mini Plus V2 USB DVB-T Stick won't be recognised any longer

[Adrian Immanuel Kiess]

Package: src:linux
Version: 4.5.1-1
Severity: normal

Dear Maintainer,

   * What led up to the situation?
 Upgrading to newer 4.x kernel versions
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 ""
   * What was the outcome of this action?
 Asus MyCinema U3100 Mini Plus V2 USB DVB-T Stick won't work any longer. It
is recognised by the kernel, but Me-TV won't recognise it.
   * What outcome did you expect instead?
 Working DVB-T stick

since newer kernel versions (actually using linux kernel v4.5) my Asus MyCinema
U3100 Mini Plus V2 USB DVB-T Stick won't work any longer.

Here is the output of syslog:

Apr 30 05:34:14 g6 kernel: [ 6036.453857] usb 2-2.3: USB disconnect, device
number 5
Apr 30 05:34:15 g6 kernel: [ 6037.615546] usb 2-2.3: new high-speed USB device
number 11 using xhci_hcd
Apr 30 05:34:15 g6 kernel: [ 6037.718847] usb 2-2.3: New USB device found,
idVendor=1b80, idProduct=d3a8
Apr 30 05:34:15 g6 kernel: [ 6037.718853] usb 2-2.3: New USB device strings:
Mfr=1, Product=2, SerialNumber=0
Apr 30 05:34:15 g6 kernel: [ 6037.718855] usb 2-2.3: Product: Rtl2832UDVB
Apr 30 05:34:15 g6 kernel: [ 6037.718857] usb 2-2.3: Manufacturer: Realtek
Apr 30 05:34:15 g6 mtp-probe: checking bus 2, device 11:
"/sys/devices/pci:00/:00:1c.0/:10:00.0/usb2/2-2/2-2.3"
Apr 30 05:34:15 g6 mtp-probe: bus: 2, device: 11 was not an MTP device

The USB DVB-T stick is recognised but Me-TV shows no tuner found. Worked fine
before on older kernel versions.

Thank you very much for your kind reply.

With many freetings,

Adrian Immanuel Kieß
http://www.immanuelK.net




-- Package-specific info:
** Version:
Linux version 4.5.0-1-amd64 (debian-ker...@lists.debian.org) (gcc version 5.3.1 
20160409 (Debian 5.3.1-14) ) #1 SMP Debian 4.5.1-1 (2016-04-14)

** Command line:
BOOT_IMAGE=/vmlinuz-4.5.0-1-amd64 
root=UUID=96d5fdb9-5d4e-46f2-89e3-34fcfc7bfe14 ro splash vga=795 splash vga=775 
resume=/dev/sdc2

** Tainted: E (8192)
 * Unsigned module has been loaded (currently expected).

** Kernel log:
[   16.174129] bluetooth hci0: Direct firmware load for 
brcm/BCM20702A1-0a5c-21e8.hcd failed with error -2
[   16.174131] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e8.hcd not 
found
[   16.281385] usbcore: registered new interface driver snd-usb-audio
[   16.325945] iTCO_vendor_support: vendor-support=0
[   16.326633] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   16.326664] iTCO_wdt: Found a 3420 TCO device (Version=2, TCOBASE=0x1060)
[   16.326686] watchdog: iTCO_wdt: cannot register miscdev on minor=130 
(err=-16).
[   16.326686] watchdog: iTCO_wdt: a legacy watchdog module is probably present.
[   16.326734] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   16.788687] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 
user_xattr
[   16.940535] Adding 34814972k swap on /dev/sdd2.  Priority:100 extents:1 
across:34814972k FS
[   16.983627] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: 
user_xattr
[   34.930411] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: 
user_xattr
[   38.474404] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: 
user_xattr,usrquota
[   39.014054] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   39.534567] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   39.542180] Bluetooth: BNEP filters: protocol multicast
[   39.549881] Bluetooth: BNEP socket layer initialized
[   40.550931] tg3 :1e:00.0 eth0: Link is up at 100 Mbps, full duplex
[   40.558823] tg3 :1e:00.0 eth0: Flow control is on for TX and on for RX
[   40.558842] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   40.610426] traps: atop[1476] trap divide error ip:4073c2 sp:7fff5b974970 
error:0 in atop[40+26000]
[   44.727068] usblp1: removed
[   44.728722] usblp 1-1.5:1.0: usblp1: USB Bidirectional printer dev 4 if 0 
alt 0 proto 2 vid 0x04E8 pid 0x3268
[   49.383902] RPC: Registered named UNIX socket transport module.
[   49.383906] RPC: Registered udp transport module.
[   49.383908] RPC: Registered tcp transport module.
[   49.383909] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   49.398337] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[   49.412465] audit: netlink_unicast sending to audit_pid=0 returned error: 
-111
[   49.412471] audit: type=1302 audit(1461981267.051:64661): item=0 
name="/usr/lib/pymodules/python2.7/apport_python_hook.pyc" nametype=UNKNOWN
[   49.412473] audit: type=1327 audit(1461981267.051:64661): 
proctitle=2F62696E2F7368002F6574632F696E69742E642F73616D62612D61642D6463007374617274
[   49.412475] audit: type=1300 audit(1461981267.051:64662): arch=c03e 
syscall=2 success=no exit=-2 a0=205f770 a1=0 a2=1b6 a3=0 items=1 ppid=2172 
pid=2177 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 
fsgid=0 tty=(none) ses=4294967295 comm="samba-tool" exe="/usr/bin/python2.7" 
key=(null)
[   49.412476] audit: type=1307 

Bug#799091: [lyx] Crashes when Cutting emphasized text

[Adrian Immanuel Kiess]

Package: lyx
Version: 2.1.4-1
Followup-For: Bug #799091

Dear Maintainer,

I can confirm this bug too.

Hitting CTRL+X makes LyX crash and disappear.

Thank you for your efforts.

Sincerely,

Adrian Immanuel Kiess



-- System Information:
Debian Release: stretch/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.1.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages lyx depends on:
ii  libboost-regex1.58.01.58.0+dfsg-3
ii  libboost-signals1.58.0  1.58.0+dfsg-3
ii  libc6   2.19-19
ii  libenchant1c2a  1.6.0-10.1
ii  libgcc1 1:5.2.1-17
ii  libmagic1   1:5.22+15-2
ii  libmythes-1.2-0 2:1.2.4-1
ii  libqtcore4  4:4.8.7+dfsg-3
ii  libqtgui4   4:4.8.7+dfsg-3
ii  libstdc++6  5.2.1-17
ii  lyx-common  2.1.4-1
ii  xdg-utils   1.1.0~rc3+git20150907-1
ii  zlib1g  1:1.2.8.dfsg-2+b1

Versions of packages lyx recommends:
ii  acroread [pdf-viewer]9.5.5-dmo1
ii  dvipng   1.14-2+b1
ii  elyxer   1.2.5-1
ii  evince [pdf-viewer]  3.16.1-1
ii  fonts-lyx2.1.4-1
ii  ghostscript  9.16~dfsg-2
ii  gv [pdf-viewer]  1:3.7.4-1
ii  imagemagick  8:6.8.9.9-5.1+b1
ii  mupdf [pdf-viewer]   1.7-1
ii  okular [pdf-viewer]  4:15.08.0-1
ii  poppler-utils0.26.5-4
ii  preview-latex-style  11.87-3+deb8u1
ii  psutils  1.17.dfsg-2
ii  tex4ht   20090611-1.1+b1
ii  texlive-fonts-recommended2015.20150823-1
ii  texlive-generic-extra2015.20150823-1
ii  texlive-generic-recommended  2015.20150823-1
ii  texlive-latex-extra  2015.20150823-1
ii  texlive-latex-recommended2015.20150823-1
ii  texlive-science  2015.20150823-1
ii  tth  4.05+ds-1

Versions of packages lyx suggests:
ii  chktex1.7.4-1
ii  etoolbox  2015.20150823-1
ii  gnuhtml2latex 0.4-2
ii  groff 1.22.3-1
ii  inkscape  0.91-5+b2
ii  latex-xcolor  2014.20141024-2
ii  latex2rtf 2.3.8-1
ii  librsvg2-bin  2.40.10-1
ii  libtiff-tools 4.0.5-1
ii  linuxdoc-tools0.9.69-4
ii  lyx-dbg   2.1.4-1
ii  noweb 2.11b-9
ii  rcs   5.9.4-3
ii  sgmltools-lite3.0.3.0.cvs.20010909-18
ii  texlive-latex-recommended [latex-xcolor]  2015.20150823-1
ii  texlive-xetex 2015.20150823-1
ii  writer2latex  1.0.2-10
ii  wv1.2.9-4.1

-- no debconf information

Bug#799236: evolution: Crashes when trying to send (reply) with HTML formatted message

[Adrian Immanuel Kiess]

Package: evolution
Version: 3.16.3-1
Severity: normal

Dear Maintainer,

   * What led up to the situation?
 Replying to an HTML formatted message
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 Pushing Reply To button
   * What was the outcome of this action?
 Evolution crashes
   * What outcome did you expect instead?
 Working Reply To Window

evolution in Debian/testing crashes when replying to an HTML formatted message.

Thanks in advance.

Sincerely,

Adrian Immanuel Kiess




-- System Information:
Debian Release: stretch/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.1.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages evolution depends on:
ii  dbus   1.10.0-2
ii  debconf [debconf-2.0]  1.5.57
ii  evolution-common   3.16.3-1
ii  evolution-data-server  3.16.3-1+b1
ii  libatk1.0-02.16.0-2
ii  libc6  2.19-19
ii  libcamel-1.2-523.16.3-1+b1
ii  libclutter-gtk-1.0-0   1.6.2-1
ii  libecal-1.2-18 3.16.5-1
ii  libedataserver-1.2-20  3.16.3-1+b1
ii  libevolution   3.16.5-1
ii  libglib2.0-0   2.44.1-1.1
ii  libgtk-3-0 3.16.6-1
ii  libical1a  1.0.1-0.1
ii  libnotify4 0.7.6-2
ii  libsoup2.4-1   2.50.0-2
ii  libwebkitgtk-3.0-0 2.4.9-2
ii  libxml22.9.1+dfsg1-5
ii  psmisc 22.21-2.1

Versions of packages evolution recommends:
ii  bogofilter 1.2.4+dfsg1-3
ii  evolution-plugins  3.16.3-1
ii  yelp   3.16.1-1

Versions of packages evolution suggests:
ii  evolution-ews   3.16.3-1
ii  evolution-plugins-experimental  3.16.3-1
ii  gnupg   1.4.19-5
ii  network-manager 1.0.6-1

-- debconf information:
  evolution/kill_processes:
  evolution/needs_shutdown:

Bug#696223: linux-image-3.6-trunk-amd64: USB keyboard and mouse stop working

[Adrian Immanuel Kiess]

Package: src:linux
Version: 3.16.7-ckt2-1
Followup-For: Bug #696223

Dear Maintainer,

   * What led up to the situation?
 Upgrading system
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 Boot into system
   * What was the outcome of this action?
 Keyboard and mice behind USB hub (HP Monitor) don't work after bootup
   * What outcome did you expect instead?
 Working keyboard and mice after booting

currently in Debian/testing I have trouble with my keyboard (Lenovo) and mice
(Lenovo) which don't respond to any input after some time when booting.

Until systemd switches from the kernel details output keyboard and mice work
but then they become unresponsive.

Only replugging keyboard and mice after XDM appears helps -- working then
again.

The Lenovo keyboard and Lenovo mice are connected behind a HP Compaq LA1952g
Monitor.

While replugging the devices I get the following kernel messages:

Jan 18 02:53:07 g6 kernel: [ 2661.078799] hid-generic 0003:04B3:3025.0005:
can't reset device, :00:1a.0-1.4.2/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.079668] hid-generic 0003:17EF:601D.0004:
can't reset device, :00:1a.0-1.4.1/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.082815] usb 3-1.4: clear tt 2 (0080) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.087041] usb 3-1.4: clear tt 1 (0070) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.087169] hid-generic 0003:04B3:3025.0005:
can't reset device, :00:1a.0-1.4.2/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.091058] hid-generic 0003:17EF:601D.0004:
can't reset device, :00:1a.0-1.4.1/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.091263] usb 3-1.4: clear tt 2 (0080) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.095391] hid-generic 0003:04B3:3025.0005:
can't reset device, :00:1a.0-1.4.2/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.095670] usb 3-1.4: clear tt 1 (0070) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.099677] hid-generic 0003:17EF:601D.0004:
can't reset device, :00:1a.0-1.4.1/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.099919] usb 3-1.4: clear tt 2 (0080) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.103940] hid-generic 0003:04B3:3025.0005:
can't reset device, :00:1a.0-1.4.2/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.104175] usb 3-1.4: clear tt 1 (0070) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.108428] usb 3-1.4: clear tt 2 (0080) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.112192] hid-generic 0003:17EF:601D.0004:
can't reset device, :00:1a.0-1.4.1/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.112438] hid-generic 0003:04B3:3025.0005:
can't reset device, :00:1a.0-1.4.2/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.116188] usb 3-1.4: clear tt 1 (0070) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.120193] hid-generic 0003:17EF:601D.0004:
can't reset device, :00:1a.0-1.4.1/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.120433] usb 3-1.4: clear tt 2 (0080) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.124434] hid-generic 0003:04B3:3025.0005:
can't reset device, :00:1a.0-1.4.2/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.124657] usb 3-1.4: clear tt 1 (0070) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.128700] hid-generic 0003:17EF:601D.0004:
can't reset device, :00:1a.0-1.4.1/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.128939] usb 3-1.4: clear tt 2 (0080) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.133193] usb 3-1.4: clear tt 1 (0070) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.135329] hid-generic 0003:04B3:3025.0005:
can't reset device, :00:1a.0-1.4.2/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.137200] hid-generic 0003:17EF:601D.0004:
can't reset device, :00:1a.0-1.4.1/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.139322] usb 3-1.4: clear tt 2 (0080) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.143300] hid-generic 0003:04B3:3025.0005:
can't reset device, :00:1a.0-1.4.2/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.143562] usb 3-1.4: clear tt 1 (0070) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.147828] usb 3-1.4: clear tt 2 (0080) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.151716] hid-generic 0003:17EF:601D.0004:
can't reset device, :00:1a.0-1.4.1/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.151834] hid-generic 0003:04B3:3025.0005:
can't reset device, :00:1a.0-1.4.2/i
nput0, status -71
:

Thank you.

With many greetings,

Adrian Immanuel KIESS




-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-ker...@lists.debian.org) (gcc version 
4.8.3 (Debian 4.8.3-16) ) #1 SMP Debian 3.16.7-ckt2-1 (2014-12-08)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 
root=UUID=5a7bc907-35b2-4039-8928-50d6afad3863 ro splash vga=795 splash vga=775 
resume=/dev/sdb2

** Tainted: C (1024)
 * Module from drivers/staging has been loaded.

** Kernel log:
[ 2627.540839] tun: Universal TUN/TAP device driver, 1.6

Bug#774115: linux-image-3.2.0-4-amd64: xhci_hcd : ramdom USB disconnect with 4To external HDD

[Adrian Immanuel Kiess]

Package: src:linux
Version: 3.16.7-ckt2-1
Followup-For: Bug #774115

Dear Maintainer,

   * What led up to the situation?
 Using an USB 3.0 external Seage Expanion Desktop Drive, size 4TB
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 Using the drive as backup drive with storebackup
   * What was the outcome of this action?
 Drive reads with about a maximum of 145MB/s but -writes- only with slow
10MB/s. Both tested on USB 2.0 and USB 3.0 ports
   * What outcome did you expect instead?
 Write speed much higher than 10MB/s

I'm using a Seagate Expansion Desk drive, USB 3.0 with 4 TB of storage as
backup drive connected to a USB 3.0 port from an Transcend PCIe card put into
my HP ProLiant ML110 G6 server.

I tested this using Debian/testing and Kernel Linux g6 3.16.0-4-amd64 #1 SMP
Debian 3.16.7-ckt2-1 (2014-12-08) x86_64 GNU/Linux.

Symptoms as following: The drive reads on a USB 3.0 port with about 145MB/s
(good) but writes only with a maximum of 10MB/s. The slow write speed also
applies to an USB 2.0 port I tested with.

In addition, when I use the drive through an USB 3.0 connection, I get kernel
error messages as enclosed below. This happend when I tested the drive with
bonnie++.

Following are the outputs I can give you:


From /var/log/syslog:

Jan 11 13:20:10 g6 kernel: [120341.476911] usb 2-1.1: reset SuperSpeed USB
device number 7 using xhci_hcd
Jan 11 13:20:10 g6 kernel: [120341.491791] xhci_hcd :10:00.0: xHCI
xhci_drop_endpoint called with disabled ep f
fff8803f0d93280
Jan 11 13:20:10 g6 kernel: [120341.491796] xhci_hcd :10:00.0: xHCI
xhci_drop_endpoint called with disabled ep f
fff8803f0d932c8
Jan 11 13:24:47 g6 kernel: [120618.565778] usb 2-1.1: reset SuperSpeed USB
device number 7 using xhci_hcd
Jan 11 13:24:47 g6 kernel: [120618.584711] xhci_hcd :10:00.0: xHCI
xhci_drop_endpoint called with disabled ep f
fff8803f0d93280
Jan 11 13:24:47 g6 kernel: [120618.584719] xhci_hcd :10:00.0: xHCI
xhci_drop_endpoint called with disabled ep f
fff8803f0d932c8


bonnie++ -u adrian -r 16000 -d /backup/tmp, you can see here the slow write
speed of about 8MB/s:

Delete files in sequential order...done.
Create files in random order...done.
Stat files in random order...done.
Delete files in random order...done.
Version  1.97   --Sequential Output-- --Sequential Input- --Random-
Concurrency   1 -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
MachineSize K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP  /sec %CP
g6   32000M   697  91  8399   1  7422   0  3749  84 65787   4  92.6   1
Latency 22682us2550ms  144s   12619us   31045ms5458ms
Version  1.97   --Sequential Create-- Random Create
g6  -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
  files  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP
   16   718   0 + +++  6192   7
9221   9 + +++  8312   8
   Latency
21503us 430us 738us 818us  84us 567us
1.97,1.97,g6,1,1420961283,32000M,,697,91,8399,1,7422,0,3749,84,65787,4,92.6,1,16,718,0,+,+++,6192,7,9221,9,+,+++,8312,8,22682us,2550ms,144s,12619us,31045ms,5458ms,21503us,430us,738us,818us,84us,567us


Thank you very much for your efforts,

Adrian Immanuel KIEß



-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-ker...@lists.debian.org) (gcc version 
4.8.3 (Debian 4.8.3-16) ) #1 SMP Debian 3.16.7-ckt2-1 (2014-12-08)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 
root=UUID=5a7bc907-35b2-4039-8928-50d6afad3863 ro splash vga=795 splash vga=775 
resume=/dev/sdb2

** Tainted: C (1024)
 * Module from drivers/staging has been loaded.

** Kernel log:
[121104.883233] xhci_hcd :10:00.0: xHCI xhci_drop_endpoint called with 
disabled ep 8803f0d932c8
[121126.535995] sd 8:0:0:0: [sdd] Bad block number requested
[121201.945281] usb 2-1.1: reset SuperSpeed USB device number 7 using xhci_hcd
[121201.967634] xhci_hcd :10:00.0: xHCI xhci_drop_endpoint called with 
disabled ep 8803f0d93280
[121201.967642] xhci_hcd :10:00.0: xHCI xhci_drop_endpoint called with 
disabled ep 8803f0d932c8
[121303.109561] sd 8:0:0:0: [sdd] Bad block number requested
[121434.080066] usb 2-1.1: reset SuperSpeed USB device number 7 using xhci_hcd
[121434.098500] xhci_hcd :10:00.0: xHCI xhci_drop_endpoint called with 
disabled ep 8803f0d93280
[121434.098506] xhci_hcd :10:00.0: xHCI xhci_drop_endpoint called with 
disabled ep 8803f0d932c8
[121487.166600] usb 2-1.1: reset SuperSpeed USB device number 7 using xhci_hcd
[121487.181315] xhci_hcd :10:00.0: xHCI xhci_drop_endpoint called with 
disabled ep 8803f0d93280
[121487.181322] xhci_hcd :10:00.0: xHCI xhci_drop_endpoint called with 
disabled ep 8803f0d932c8
[121687.695940] 

Bug#771762: [DEPEND] Dependency failed for X11 Display Manager.

[Adrian Immanuel Kiess]

Package: gdm3
Version: 3.14.1-3
Followup-For: Bug #771762

Dear Maintainer,

   * What led up to the situation?
 Trying to run GDM3 at startup or with service gdm3 restart
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 service kdm stop; dpkg-reconfigure gdm3; service gdm3 start
   * What was the outcome of this action?
 GDM3 does not work in Debian/testing
   * What outcome did you expect instead?
 Running and working GDM3

currently in Debian/testing GDM3 is broken for me.

It seems it tries to spawn a Xorg instance but fails with that.

I'll give the system logs below:

adrian@g6 (~) % systemctl status gdm3.service
● gdm.service - GNOME Display Manager
   Loaded: loaded (/lib/systemd/system/gdm.service; static)
  Drop-In: /run/systemd/generator/gdm3.service.d
   └─50-gdm3-$x-display-manager.conf
   Active: failed (Result: start-limit) since Sat 2015-01-10 11:38:47 CET; 6min
ago
  Process: 7364 ExecStartPre=/bin/sh -c [ $(cat /etc/X11/default-display-
manager 2/dev/null) = /usr/sbin/gdm3 ] (code=exited, status=1/FAILURE)


gdm.service - GNOME Display Manager
   Loaded: loaded (/lib/systemd/system/gdm.service; enabled)
  Drop-In: /run/systemd/generator/gdm3.service.d
   └─50-gdm3-$x-display-manager.conf
   Active: failed (Result: start-limit) since Sat 2015-01-10 03:59:03 CET; 7h
ago

Jan 10 03:59:02 g6 systemd[1]: Unit gdm.service entered failed state.
Jan 10 03:59:02 g6 systemd[1]: Starting GNOME Display Manager...
Jan 10 03:59:03 g6 systemd[1]: gdm.service holdoff time over, scheduling
restart.
Jan 10 03:59:03 g6 systemd[1]: Stopping GNOME Display Manager...
Jan 10 03:59:03 g6 systemd[1]: Starting GNOME Display Manager...
Jan 10 03:59:03 g6 systemd[1]: gdm.service start request repeated too quickly,
refusing to start.
Jan 10 03:59:03 g6 systemd[1]: Failed to start GNOME Display Manager.
Jan 10 03:59:03 g6 systemd[1]: Unit gdm.service entered failed state.
Jan 10 10:58:07 g6 systemd[1]: Unit gdm.service cannot be reloaded because it
is inactive.
Jan 10 10:58:57 g6 systemd[1]: Unit gdm.service cannot be reloaded because it
is inactive.


-- Logs begin at Sat 2015-01-10 03:55:50 CET, end at Sat 2015-01-10 10:52:21
CET. --
Jan 10 03:56:55 g6 systemd[1]: Starting GNOME Display Manager...
Jan 10 03:56:55 g6 systemd[1]: gdm.service: control process exited, code=exited
status=1
Jan 10 03:56:55 g6 systemd[1]: Failed to start GNOME Display Manager.
Jan 10 03:56:55 g6 systemd[1]: Unit gdm.service entered failed state.
Jan 10 03:56:55 g6 systemd[1]: Starting GNOME Display Manager...
Jan 10 03:56:56 g6 systemd[1]: gdm.service holdoff time over, scheduling
restart.
Jan 10 03:56:56 g6 systemd[1]: Stopping GNOME Display Manager...
Jan 10 03:56:56 g6 systemd[1]: Starting GNOME Display Manager...
Jan 10 03:56:56 g6 systemd[1]: gdm.service: control process exited, code=exited
status=1
Jan 10 03:56:56 g6 systemd[1]: Failed to start GNOME Display Manager.
Jan 10 03:56:56 g6 systemd[1]: Unit gdm.service entered failed state.
Jan 10 03:56:56 g6 systemd[1]: Starting GNOME Display Manager...
Jan 10 03:56:57 g6 systemd[1]: gdm.service holdoff time over, scheduling
restart.
Jan 10 03:56:57 g6 systemd[1]: Stopping GNOME Display Manager...
Jan 10 03:56:57 g6 systemd[1]: Starting GNOME Display Manager...
Jan 10 03:56:57 g6 systemd[1]: gdm.service: control process exited, code=exited
status=1
Jan 10 03:56:57 g6 systemd[1]: Failed to start GNOME Display Manager.
Jan 10 03:56:57 g6 systemd[1]: Unit gdm.service entered failed state.
Jan 10 03:56:57 g6 systemd[1]: Starting GNOME Display Manager...
Jan 10 03:56:58 g6 systemd[1]: gdm.service holdoff time over, scheduling
restart.
Jan 10 03:56:58 g6 systemd[1]: Stopping GNOME Display Manager...
Jan 10 03:56:58 g6 systemd[1]: Starting GNOME Display Manager...
Jan 10 03:56:58 g6 systemd[1]: gdm.service: control process exited, code=exited
status=1
Jan 10 03:56:58 g6 systemd[1]: Failed to start GNOME Display Manager.
Jan 10 03:56:58 g6 systemd[1]: Unit gdm.service entered failed state.
Jan 10 03:56:58 g6 systemd[1]: Starting GNOME Display Manager...
Jan 10 03:56:59 g6 systemd[1]: gdm.service holdoff time over, scheduling
restart.
Jan 10 03:56:59 g6 systemd[1]: Stopping GNOME Display Manager...
Jan 10 03:56:59 g6 systemd[1]: Starting GNOME Display Manager...
Jan 10 03:56:59 g6 systemd[1]: gdm.service: control process exited, code=exited
status=1
Jan 10 03:57:00 g6 systemd[1]: Failed to start GNOME Display Manager.
Jan 10 03:57:00 g6 systemd[1]: Unit gdm.service entered failed state.
Jan 10 03:57:00 g6 systemd[1]: Starting GNOME Display Manager...
Jan 10 03:57:01 g6 systemd[1]: gdm.service holdoff time over, scheduling
restart.
Jan 10 03:57:01 g6 systemd[1]: Stopping GNOME Display Manager...
Jan 10 03:57:01 g6 systemd[1]: Starting GNOME Display Manager...
Jan 10 03:57:01 g6 systemd[1]: gdm.service start request repeated too quickly,
refusing to start.
Jan 10 03:57:01 g6 systemd[1]: Failed to start GNOME Display Manager.

Bug#755919: e17: Mouse pointer got lost after recent upgrades

[Adrian Immanuel Kiess]

Package: e17
Version: 0.17.6-1
Severity: important

Dear Maintainer,

   * What led up to the situation?
 Upgrading Debian/testing installation, not the update to v17.6 of E, some
upgrade days later
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 apt-get -u dist-upgrade
   * What was the outcome of this action?
 GDM3 stopped working and mouse pointer within E17 not shown anymore; mouse
pointer works within GNOME
   * What outcome did you expect instead?
 Working mouse pointer within E17

could you please reply how I can check why the mouse pointer within E17 is not
shown anymore?

I now have a working mouse pointer within a GNOME session. GDM3 stopped working
too.

Thank you very much,

Adrian Immanuel KIESS



-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.14-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages e17 depends on:
ii  dbus-x11   1.8.6-1
ii  e17-data   0.17.6-1
ii  libasound2 1.0.28-1
ii  libc6  2.19-7
ii  libdbus-1-31.8.6-1
ii  libecore-con1  1.8.6-2
ii  libecore-evas1 1.8.6-2
ii  libecore-file1 1.8.6-2
ii  libecore-imf1  1.8.6-2
ii  libecore-input11.8.6-2
ii  libecore-ipc1  1.8.6-2
ii  libecore-x11.8.6-2
ii  libecore1  1.8.6-2
ii  libedbus1  1.7.10-1
ii  libedje-bin1.8.6-2
ii  libedje1   1.8.6-2
ii  libeet11.8.6-2
ii  libeeze1   1.8.6-2
ii  libefreet-bin  1.8.6-2
ii  libefreet1a1.8.6-2
ii  libeina1   1.8.6-2
ii  libeio11.8.6-2
ii  libevas1   1.8.6-2
ii  libevas1-engines-x [libevas1-engine-software-x11]  1.8.6-2
ii  libpam0g   1.1.8-3
ii  libxcb-keysyms10.3.9-1
ii  libxcb-shape0  1.10-3
ii  libxcb11.10-3

Versions of packages e17 recommends:
ii  pm-utils  1.4.1-15

e17 suggests no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#755460: evolution: HTML e-mails are not displayed correctly

[Adrian Immanuel Kiess]

Package: evolution
Version: 3.12.2-1
Severity: normal

Dear Maintainer,

   * What led up to the situation?
 Upgrading system
   * What was the outcome of this action?
 Not all HTML e-mails are displayed correctly anymore
   * What outcome did you expect instead?
 Evolution displaying HTML e-mails correctly

currently in Debian/testing Evolution does not display all HTML e-mails
correctly. Only the HTML source is displayed and hitting CTRL+i won't show a
formatted message.

Thanks for your efforts,

Adrian Immanuel KIESS




-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.14-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages evolution depends on:
ii  dbus   1.8.6-1
ii  debconf [debconf-2.0]  1.5.53
ii  evolution-common   3.12.2-1
ii  evolution-data-server  3.12.2-1
ii  gnome-icon-theme   3.12.0-1
ii  libatk1.0-02.12.0-1
ii  libc6  2.19-7
ii  libcamel-1.2-493.12.2-1
ii  libclutter-gtk-1.0-0   1.5.2-2
ii  libecal-1.2-16 3.12.2-1
ii  libedataserver-1.2-18  3.12.2-1
ii  libevolution   3.12.2-1
ii  libglib2.0-0   2.40.0-3
ii  libgtk-3-0 3.12.2-1+b1
ii  libical1   1.0-1
ii  libnotify4 0.7.6-2
ii  libsoup2.4-1   2.46.0-2
ii  libwebkitgtk-3.0-0 2.4.4-2
ii  libxml22.9.1+dfsg1-4
ii  psmisc 22.21-2

Versions of packages evolution recommends:
ii  bogofilter 1.2.4+dfsg1-3
ii  evolution-plugins  3.12.2-1
ii  yelp   3.12.0-1

Versions of packages evolution suggests:
ii  evolution-ews   3.12.1-1
ii  evolution-plugins-experimental  3.12.2-1
ii  gnupg   1.4.18-2
ii  network-manager 0.9.10.0-1

-- debconf information:
  evolution/kill_processes:
  evolution/needs_shutdown:


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#743363: e17.3: Depends on libBulletSoftBody.so.2.81; but is replaced with version 2.82 in Debian/testing

[Adrian Immanuel Kiess]

Package: e17
Version: 0.17.3-3
Severity: important

Dear Maintainer,

   * What led up to the situation?
 Upgrading Debian/testing
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 apt-get autoremove
   * What was the outcome of this action?
 libBulletSoftBody.so.2.81 is missing, replaced with version 2.82, but E
depends on the old version
   * What outcome did you expect instead?
 Still working E17.3 ;-)

by upgrading Debian/testing and following apt's suggestion to autoremove
packages libBulletSoftBody version 2.81 is no longer installed but E17.3
depends on it. A new version of libBulletSoftBody, version 2.82 is installed
but enlightenment seems to be compiled only against version 2.81.

Here is the output when trying to launch E17 in current Debian/testing:

adrian@g6 (~) % enlightenment_start
E - PID=890, valgrind=0
/usr/local/bin/enlightenment: error while loading shared libraries:
libBulletSoftBody.so.2.81: cannot open shared object file: No such file or
directory


Could you please provide updated packages so enlightenment will be usable
again?

Additionally I was not able to find the old libBulletSoftBody version 2.81 in
the Debian archive so I can reinstall the old version. Where do I have to look
to find the old version of the library?

Thanks for your efforts.

Adrian Immanuel KIESS



-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.13-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages e17 depends on:
ii  dbus-x11   1.8.0-3
ii  e17-data   0.17.3-3
ii  libasound2 1.0.27.2-3
ii  libc6  2.18-4
ii  libdbus-1-31.8.0-3
ii  libecore-con1  1.7.7-2
ii  libecore-evas1 1.7.7-2
ii  libecore-file1 1.7.7-2
ii  libecore-imf1  1.7.7-2
ii  libecore-input11.7.7-2
ii  libecore-ipc1  1.7.7-2
ii  libecore-x11.7.7-2
ii  libecore1  1.7.7-2
ii  libedbus1  1.7.7-1
ii  libedje-bin1.7.7-3
ii  libedje1   1.7.7-3
ii  libeet11.7.9-1
ii  libefreet1 1.7.7-2
ii  libeina1   1.7.10-1
ii  libeio11.7.7-1
ii  libevas1   1.7.9-2
ii  libevas1-engines-x [libevas1-engine-software-x11]  1.7.9-2
ii  libpam0g   1.1.8-2
ii  libxcb-keysyms10.3.9-1
ii  libxcb-shape0  1.10-2
ii  libxcb11.10-2

Versions of packages e17 recommends:
ii  pm-utils  1.4.1-13

e17 suggests no packages.

-- no debconf information
attachment: Screenshot from 2014-04-02 06:21:36.png

Bug#742938: evolution: Data source does not support OAuth 2.0 authentication

[Adrian Immanuel Kiess]

Package: evolution
Version: 3.8.5-2+b3
Severity: normal

Dear Maintainer,

   * What led up to the situation?
 Using evolution with goa account
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 Start evolution
   * What was the outcome of this action?
 New mail can't be fetched; due to the error described below
   * What outcome did you expect instead?
 Working account

currently in Debian/testing, evolution reports this error when using an gnome-
online-accounts account:

Error while performing operation.
Data source 'adr...@immanuelk.net' does not support OAuth 2.0 authentication

Mail can be sent, but no new mail can be fetched.

I am using an gmail account.

Thanks for your efforts,

Adrian Immanuel KIESS



-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.13-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages evolution depends on:
ii  dbus   1.8.0-2
ii  debconf [debconf-2.0]  1.5.52
ii  evolution-common   3.8.5-2
ii  evolution-data-server  3.8.5-3+b2
ii  gnome-icon-theme   3.10.0-1
ii  libatk1.0-02.10.0-2
ii  libc6  2.18-4
ii  libcamel-1.2-433.8.5-3+b2
ii  libecal-1.2-15 3.8.5-3+b2
ii  libedataserver-1.2-17  3.8.5-3+b2
ii  libevolution   3.8.5-2+b3
ii  libglib2.0-0   2.38.2-5
ii  libgtk-3-0 3.10.7-1
ii  libical1   1.0-1
ii  libnotify4 0.7.6-2
ii  libsoup2.4-1   2.44.2-1
ii  libwebkitgtk-3.0-0 2.2.6-1
ii  libxml22.9.1+dfsg1-3
ii  psmisc 22.21-1

Versions of packages evolution recommends:
ii  bogofilter 1.2.4+dfsg1-2
ii  evolution-plugins  3.8.5-2+b3
ii  yelp   3.10.1-1

Versions of packages evolution suggests:
ii  evolution-ews   3.8.5-2+b1
ii  evolution-plugins-experimental  3.8.5-2+b3
ii  gnupg   1.4.16-1.1
ii  network-manager 0.9.8.0-5

-- debconf information:
  evolution/needs_shutdown:
  evolution/kill_processes:


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#742668: cups: Fails to install because can't listen to sockets

[Adrian Immanuel Kiess]

Package: cups
Version: 1.7.1-10
Severity: important

Dear Maintainer,

   * What led up to the situation?
 Upgrading system
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 apt-get -u dist-upgrade
   * What was the outcome of this action?
 New cups version can't be installed, cups service no more running
   * What outcome did you expect instead?
 Working cups service

by upgrading Debian/testing this day I get the following error:

Do you want to continue? [Y/n] Y
Setting up cups-daemon (1.7.1-10) ...
A dependency job for cups.service failed. See 'journalctl -xn' for details.
invoke-rc.d: initscript cups, action start failed.
configured to not write apport reports
  configured to not write apport reports
configured to not write apport reports
 dpkg: error processing package cups-daemon (--configure):
 subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of cups-core-drivers:
 cups-core-drivers depends on cups-daemon (= 1.7.1-10); however:
  Package cups-daemon is not configured yet.

dpkg: error processing package cups-core-drivers (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of cups:
 cups depends on cups-core-drivers (= 1.7.1-10); however:
  Package cups-core-drivers is not configured yet.
 cups depends on cups-daemon (= 1.7.1-10); however:
  Package cups-daemon is not configured yet.

dpkg: error processing package cups (--configure):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 cups-daemon
 cups-core-drivers
 cups
E: Sub-process /usr/bin/dpkg returned an error code (1)


journalctl -xn shows:

Mar 26 05:10:16 g6 systemd[1]: Starting CUPS Printing Service Sockets.
-- Subject: Unit cups.socket has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit cups.socket has begun starting up.
Mar 26 05:10:16 g6 systemd[1]: cups.socket failed to listen on sockets: Address
already in use
Mar 26 05:10:16 g6 systemd[1]: Failed to listen on CUPS Printing Service
Sockets.
-- Subject: Unit cups.socket has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation:
http://www.freedesktop.org/wiki/Software/systemd/catalog/be02cf6855d2428ba40df7e9d022f0
3d
--
-- Unit cups.socket has failed.
--
-- The result is failed.
Mar 26 05:10:16 g6 systemd[1]: Dependency failed for CUPS Printing Service.
-- Subject: Unit cups.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation:
http://www.freedesktop.org/wiki/Software/systemd/catalog/be02cf6855d2428ba40df7e9d022f0
3d
--
-- Unit cups.service has failed.
--
-- The result is dependency.


Cups can't listen to default sockets (ports) but no other process is listening
there. I guess this is a bug.

Because of this, cups is no more working.

Thanks for your efforts,

Adrian Immanuel KIESS




-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.13-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages cups depends on:
ii  cups-client1.7.1-10
ii  cups-common1.7.1-10
iu  cups-core-drivers  1.7.1-10
ih  cups-daemon1.7.1-10
ii  cups-filters   1.0.47-2
ii  cups-ppdc  1.7.1-10
ii  cups-server-common 1.7.1-10
ii  debconf [debconf-2.0]  1.5.52
ii  ghostscript9.05~dfsg-8+b1
ii  libavahi-client3   0.6.31-4
ii  libavahi-common3   0.6.31-4
ii  libc-bin   2.18-4
ii  libc6  2.18-4
ii  libcups2   1.7.1-10
ii  libcupscgi11.7.1-10
ii  libcupsimage2  1.7.1-10
ii  libcupsmime1   1.7.1-10
ii  libcupsppdc1   1.7.1-10
ii  libgcc11:4.8.2-16
ii  libstdc++6 4.8.2-16
ii  libusb-1.0-0   2:1.0.17-1+b1
ii  lsb-base   4.1+Debian12
ii  poppler-utils  0.22.5-4
ii  procps 1:3.3.9-2

Versions of packages cups recommends:
ii  avahi-daemon 0.6.31-4
ii  colord   1.0.6-1
ii  cups-filters [ghostscript-cups]  1.0.47-2
ii  printer-driver-gutenprint5.2.9-1

Versions of packages cups suggests:
ii  cups-bsd   1.7.1-10
ii  cups-pdf   2.6.1-9
ii  foomatic-db20140218-1
pn  hplip  none
ii  printer-driver-hpcups  3.14.1-1
pn  smbclient  none
ii  udev   204-8

-- debconf information:
  cupsys/backend: lpd, socket, usb, snmp, dnssd
  cupsys/raw-print: true


-- 
To UNSUBSCRIBE

Bug#723896: Acknowledgement (e17+gkrellm: gkrellm hangs after startup)

[Adrian Immanuel Kiess]

Dear everyone,

when is it possible that someone would adopt this bug?

Thank you,

Adrian


On Sat, 2013-09-21 at 02:03 +, Debian Bug Tracking System wrote: 
 Thank you for filing a new Bug report with Debian.
 
 This is an automatically generated reply to let you know your message
 has been received.
 
 Your message is being forwarded to the package maintainers and other
 interested parties for their attention; they will reply in due course.
 
 Your message has been sent to the package maintainer(s):
  Debian Pkg-e Team pkg-e-de...@lists.alioth.debian.org
 
 If you wish to submit further information on this problem, please
 send it to 723...@bugs.debian.org.
 
 Please do not send mail to ow...@bugs.debian.org unless you wish
 to report a problem with the Bug-tracking system.
 

-- 
With greetings from Leipzig, Germany.
Adrian Immanuel Kieß 

Administrator  programmer
Unix / Perl / LaTeX

mail: adrian (at) kiess.at
www: http://www.kiess.at


signature.asc
Description: This is a digitally signed message part

Bug#740819: plymouth: Monitor goes off after running X session

[Adrian Immanuel Kiess]

Package: plymouth
Version: 0.8.8-6+deb8u3
Severity: important

Dear Maintainer,

   * What led up to the situation?
  Running X session with E17 and composite enabled
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 Boot system and run startx
   * What was the outcome of this action?
 Working X session but after quitting E17 the monitor goes off and I don't
know
 how to make it go online again
   * What outcome did you expect instead?
 Monitor staying on and a display of the console

currently using an ATI FireMV card the monitor goes offline after running an X
session. I don't know quit correctly if this is plymouth's fault, but to report
this bug, I file it against plymouth.

After quitting E17 the monitor goes offline and I don't know how to resume it.
The shell still seems to be there, but the monitor is off.

I use Debian/testing with plymouth and E17, composite enabled.

Thank you for your efforts.

Adrian Immanuel KIEß



-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.13-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages plymouth depends on:
ii  initramfs-tools0.115
ii  libc6  2.17-97
ii  multiarch-support  2.17-97

plymouth recommends no packages.

Versions of packages plymouth suggests:
ii  desktop-base  7.0.3
ii  plymouth-drm  0.8.8-6+deb8u3

-- Configuration Files:
/etc/plymouth/plymouthd.conf changed:
[Daemon]
Theme=fade-in


-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#739135: storebackup: Spends too much time in SYS state

[Adrian Immanuel Kiess]

Package: storebackup
Version: 3.2.1-1
Severity: normal

Dear Maintainer,

currently in Debian/testing running storebackup results in a CPU hogging
process for me.

Storebackup proceeds fine with the process, but it spends far to much time in
SYS CPU state, anyway as I see it.

The backup process takes very long and eats a lot of CPU time.

Maybe someone can have a look at it and if there is a way to optimize it.

Thank you very much for your efforts.

With many greetings,

Adrian Immanuel KIESS



-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.13-trunk-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages storebackup depends on:
ii  bzip21.0.6-5
ii  debianutils  4.4
ii  perl 5.18.2-2

Versions of packages storebackup recommends:
ii  perl [libio-compress-bzip2-perl]  5.18.2-2

storebackup suggests no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#738947: bluetooth: wont't run at startup with systemd

[Adrian Immanuel Kiess]

Package: bluetooth
Version: 4.101-4
Severity: important

Dear Maintainer,

currently in Debian/testing the service bluetooth won't execute at startup with
systemd.

It has to be manually started with 'service bluetooth restart' after the bootup
is finished.

Thank you for your efforts.

Adrian Immanuel KIESS



-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.13-trunk-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages bluetooth depends on:
ii  bluez  4.101-4

Versions of packages bluetooth recommends:
ii  bluez-alsa   4.101-4
ii  bluez-gstreamer  4.101-4

Versions of packages bluetooth suggests:
pn  bluez-cups  none

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#738621: wishlist: Display current active screensaver in the password dialog window

[Adrian Immanuel Kiess]

Package: xscreensaver
Version: 5.23-1
Severity: wishlist

Dear Maintainer,

I would like to make a suggestion for xscreensaver.

It would be very nice, if the password display window could list the currently
active screensaver of xscreensaver.

Another idea would be an option in the preferences to display it maybe under
the FPS text or nearby the FPS text.

Thank you for your efforts.

Adrian Immanuel KIESS



-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.13-trunk-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages xscreensaver depends on:
ii  libatk1.0-0  2.10.0-2
ii  libc62.17-97
ii  libcairo21.12.16-2
ii  libfontconfig1   2.11.0-2
ii  libfreetype6 2.5.2-1
ii  libgdk-pixbuf2.0-0   2.28.2-1+b1
ii  libglade2-0  1:2.6.4-2
ii  libglib2.0-0 2.36.4-1
ii  libgtk2.0-0  2.24.22-1
ii  libice6  2:1.0.8-2
ii  libpam0g 1.1.3-9
ii  libpango-1.0-0   1.36.0-1+b1
ii  libpangocairo-1.0-0  1.36.0-1+b1
ii  libpangoft2-1.0-01.36.0-1+b1
ii  libsm6   2:1.2.1-2
ii  libx11-6 2:1.6.2-1
ii  libxext6 2:1.3.2-1
ii  libxi6   2:1.7.2-1
ii  libxinerama1 2:1.1.3-1
ii  libxml2  2.9.1+dfsg1-3
ii  libxmu6  2:1.1.1-1
ii  libxpm4  1:3.5.10-1
ii  libxrandr2   2:1.4.2-1
ii  libxrender1  1:0.9.8-1
ii  libxt6   1:1.1.4-1
ii  libxxf86vm1  1:1.1.3-1
ii  xscreensaver-data5.23-1

Versions of packages xscreensaver recommends:
ii  libjpeg-progs8d-2
ii  perl [perl5] 5.18.2-2
ii  wamerican [wordlist] 7.1-1
ii  wamerican-insane [wordlist]  7.1-1
ii  wbritish-insane [wordlist]   7.1-1
ii  wcanadian-insane [wordlist]  7.1-1
ii  wcatalan [wordlist]  0.20111230b-4
ii  wfrench [wordlist]   1.2.3-10
ii  wgerman-medical [wordlist]   20110608-1
ii  wngerman [wordlist]  20120607-1

Versions of packages xscreensaver suggests:
ii  chromium [www-browser]  31.0.1650.63-1
ii  epiphany-browser [www-browser]  3.8.2-5
ii  fortune-mod [fortune]   1:1.99.1-7
ii  gdm33.8.4-6
ii  iceweasel [www-browser] 24.2.0esr-1
ii  kdm-gdmcompat   0.13-2
ii  konqueror [www-browser] 4:4.11.3-1
ii  links2 [www-browser]2.8-1+b1
ii  lynx-cur [www-browser]  2.8.8pre4-1
ii  opera [www-browser] 12.16.1860
ii  streamer3.103-3
ii  w3m [www-browser]   0.5.3-15
pn  xdaliclock  none
pn  xfishtank   none
ii  xscreensaver-gl 5.23-1

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#737491: eterm: takes 100% CPU time

[Adrian Immanuel Kiess]

Package: eterm
Version: 0.9.6-1
Severity: important

Dear Maintainer,

currently Eterm takes 100% CPU time of one core after being executed.

Thanks for your efforts.

With many greetings,

Adrian Immanuel KIESS



-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.12-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages eterm depends on:
ii  libast20.7-6+b1
ii  libc6  2.17-97
ii  libfreetype6   2.5.2-1
ii  libice62:1.0.8-2
ii  libimlib2  1.4.6-2
ii  libsm6 2:1.2.1-2
ii  libx11-6   2:1.6.2-1
ii  libxext6   2:1.3.2-1
ii  multiarch-support  2.17-97
ii  zlib1g 1:1.2.8.dfsg-1

eterm recommends no packages.

eterm suggests no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#735665: e17: Not launchable from KDM, XDM and lightdm (only works with GDM3)

[Adrian Immanuel Kiess]

Package: e17
Version: 0.17.3-2
Severity: important

Dear Maintainer,

currently in Debian/testing E17 is only launchable from GDM3 for me. With KDM,
XDM and lightdm executing enlightenment_start does not work.

Via Xsession and startx works too.

Thank you for your efforts!

With many greetings,

Adrian Immanuel KIESS



-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.12-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages e17 depends on:
ii  dbus-x11   1.6.18-2
ii  e17-data   0.17.3-2
ii  libasound2 1.0.27.2-3
ii  libc6  2.17-97
ii  libdbus-1-31.6.18-2
ii  libecore-con1  1.7.7-2
ii  libecore-evas1 1.7.7-2
ii  libecore-file1 1.7.7-2
ii  libecore-imf1  1.7.7-2
ii  libecore-input11.7.7-2
ii  libecore-ipc1  1.7.7-2
ii  libecore-x11.7.7-2
ii  libecore1  1.7.7-2
ii  libedbus1  1.7.7-1
ii  libedje-bin1.7.7-3
ii  libedje1   1.7.7-3
ii  libeet11.7.9-1
ii  libefreet1 1.7.7-2
ii  libeina1   1.7.9-2
ii  libeio11.7.7-1
ii  libevas1   1.7.7-4
ii  libevas1-engines-x [libevas1-engine-software-x11]  1.7.7-4
ii  libpam0g   1.1.3-9
ii  libxcb-keysyms10.3.9-1
ii  libxcb-shape0  1.10-2
ii  libxcb11.10-2

Versions of packages e17 recommends:
ii  pm-utils  1.4.1-13

e17 suggests no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#735628: gdm3: Does not restart system when clicking {Restart}

[Adrian Immanuel Kiess]

Package: gdm3
Version: 3.8.4-6
Severity: normal

Dear Maintainer,

   * What led up to the situation?
 Trying to restart system via GDM
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 Clicking {Restart} button
   * What was the outcome of this action?
 None
   * What outcome did you expect instead?
 System restarting

currently in Debian/testing GDM does not restart the system after clicking
{Restart}.

The root password is asked thou, but no action is taken afterwards.

Thank you for your efforts.

With many greetings,

Adrian Immanuel KIESS



-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.12-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages gdm3 depends on:
ii  accountsservice  0.6.34-2
ii  adduser  3.113+nmu3
ii  aterm [x-terminal-emulator]  1.0.1-8+b1
ii  blackbox [x-window-manager]  0.70.1-18
ii  dconf-cli0.18.0-1
ii  dconf-gsettings-backend  0.18.0-1
ii  debconf [debconf-2.0]1.5.52
ii  e17 [x-window-manager]   0.17.3-2
ii  eterm [x-terminal-emulator]  0.9.6-1
ii  fluxbox [x-window-manager]   1.3.5-1
ii  gir1.2-gdm3  3.8.4-6
ii  gnome-session [x-session-manager]3.8.4-3
ii  gnome-session-bin3.8.4-3
ii  gnome-session-flashback [x-session-manager]  3.8.0-1
ii  gnome-settings-daemon3.8.5-2
ii  gnome-shell  3.8.4-5
ii  gnome-terminal [x-terminal-emulator] 3.10.1-1
ii  gsettings-desktop-schemas3.8.2-2
ii  kde-window-manager [x-window-manager]4:4.11.3-2+b2
ii  konsole [x-terminal-emulator]4:4.11.3-1
ii  libaccountsservice0  0.6.34-2
ii  libatk1.0-0  2.10.0-2
ii  libaudit11:2.3.2-3
ii  libc62.17-97
ii  libcairo-gobject21.12.16-2
ii  libcairo21.12.16-2
ii  libcanberra-gtk3-0   0.30-2
ii  libcanberra0 0.30-2
ii  libgdk-pixbuf2.0-0   2.28.2-1+b1
ii  libgdm1  3.8.4-6
ii  libglib2.0-0 2.36.4-1
ii  libglib2.0-bin   2.36.4-1
ii  libgtk-3-0   3.8.6-1
ii  libpam-modules   1.1.3-9
ii  libpam-runtime   1.1.3-9
ii  libpam-systemd   204-6
ii  libpam0g 1.1.3-9
ii  libpango-1.0-0   1.36.0-1+b1
ii  libpangocairo-1.0-0  1.36.0-1+b1
ii  librsvg2-common  2.40.0-1
ii  libselinux1  2.2.2-1
ii  libwrap0 7.6.q-24
ii  libx11-6 2:1.6.2-1
ii  libxau6  1:1.0.8-1
ii  libxdmcp61:1.1.1-1
ii  libxrandr2   2:1.4.1-1
ii  lsb-base 4.1+Debian12
ii  metacity [x-window-manager]  1:2.34.13-1
ii  mrxvt [x-terminal-emulator]  0.5.4-1.1
ii  mutter [x-window-manager]3.8.4-2
ii  rxvt [x-terminal-emulator]   1:2.7.10-5
ii  twm [x-window-manager]   1:1.0.6-1
ii  upower   0.9.23-2+b1
ii  x11-common   1:7.7+5
ii  x11-xserver-utils7.7+1
ii  xfce4-session [x-session-manager]4.10.1-3
ii  xfce4-terminal [x-terminal-emulator] 0.6.3-1
ii  xfwm4 [x-window-manager] 4.10.1-2
ii  xterm [x-terminal-emulator]  300-1

Versions of packages gdm3 recommends:
ii  at-spi2-core   2.10.2-2
ii  desktop-base   7.0.3
ii  gnome-icon-theme   3.10.0-1
ii  gnome-icon-theme-symbolic  3.10.1-1
ii  x11-xkb-utils  7.7+1
ii  xserver-xephyr 2:1.14.5-1
ii  xserver-xorg   1:7.7+5
ii  zenity 3.8.0-1

Versions of packages gdm3 suggests:
ii  gnome-orca3.4.2-2
ii  libpam-gnome-keyring  3.8.2-2

-- Configuration Files:
/etc/gdm3/greeter.gsettings changed:
[org.gnome.power-manager]
icon-policy='never

Bug#735526: totem: Visualisation plugin changes while switching tunes

[Adrian Immanuel Kiess]

Package: totem
Version: 3.8.2-3
Severity: normal

Dear Maintainer,

   * What led up to the situation?
 Playing last/next audio file
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 Just let the player run or foward/backward audio file
   * What was the outcome of this action?
 Visual Effects - Type changes
   * What outcome did you expect instead?
 Visualisation staying same type

totem 3.8 in Debian/testing changes Visualisation plugin while new audio file
is played. This happens randomly.

In addition to that, totem crashes from time to time while playing back an OPUS
file.

With many greetings,

Adrian Immanuel KIESS



-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.12-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages totem depends on:
ii  gnome-icon-theme3.10.0-1
ii  gnome-icon-theme-symbolic   3.10.1-1
ii  gsettings-desktop-schemas   3.8.2-2
ii  gstreamer1.0-clutter2.0.8-1
ii  gstreamer1.0-plugins-bad1.2.2-1
ii  gstreamer1.0-plugins-base   1.2.2-1
ii  gstreamer1.0-plugins-good   1.2.2-1
ii  gstreamer1.0-x  1.2.2-1
ii  libatk1.0-0 2.10.0-2
ii  libc6   2.17-97
ii  libcairo-gobject2   1.12.16-2
ii  libcairo2   1.12.16-2
ii  libclutter-1.0-01.14.4-3
ii  libclutter-gst-2.0-02.0.8-1
ii  libclutter-gtk-1.0-01.4.4-3
ii  libcogl-pango12 1.14.0-3
ii  libcogl12   1.14.0-3
ii  libdbus-1-3 1.6.18-2
ii  libdbus-glib-1-20.100.2-1
ii  libegl1-mesa [libegl1-x11]  9.2.2-1
ii  libgdk-pixbuf2.0-0  2.28.2-1+b1
ii  libgirepository-1.0-1   1.36.0-2+b1
ii  libglib2.0-02.36.4-1
ii  libgstreamer-plugins-base1.0-0  1.2.2-1
ii  libgstreamer1.0-0   1.2.2-1
ii  libgtk-3-0  3.8.6-1
ii  libjson-glib-1.0-0  0.16.2-1
ii  libnautilus-extension1a 3.8.2-2
ii  libpango-1.0-0  1.36.0-1+b1
ii  libpangocairo-1.0-0 1.36.0-1+b1
ii  libpeas-1.0-0   1.8.1-1
ii  libtotem-plparser17 3.4.5-1
ii  libtotem0   3.8.2-3
ii  libx11-62:1.6.2-1
ii  libxcomposite1  1:0.4.4-1
ii  libxdamage1 1:1.1.4-1
ii  libxext62:1.3.2-1
ii  libxfixes3  1:5.0.1-1
ii  libxi6  2:1.7.2-1
ii  libxrandr2  2:1.4.1-1
ii  python  2.7.5-5
ii  totem-common3.8.2-3

Versions of packages totem recommends:
ii  grilo-plugins-0.2  0.2.9-2
ii  gstreamer1.0-libav 1.2.2-1
ii  gstreamer1.0-plugins-ugly  1.2.2-1
ii  gstreamer1.0-pulseaudio1.2.2-1
ii  totem-plugins  3.8.2-3

Versions of packages totem suggests:
ii  gnome-codec-install  0.4.7+nmu2
pn  totem-mozillanone

Versions of packages totem-gstreamer depends on:
ii  gnome-icon-theme  3.10.0-1
ii  gstreamer0.10-alsa [gstreamer0.10-audiosink]  0.10.36-1.1
ii  gstreamer0.10-gnomevfs0.10.36-1.1
ii  gstreamer0.10-plugins-bad [gstreamer0.10-audiosink]   0.10.23-7.1
ii  gstreamer0.10-plugins-base0.10.36-1.1
ii  gstreamer0.10-plugins-good [gstreamer0.10-audiosink]  0.10.31-3+nmu2
ii  gstreamer0.10-pulseaudio [gstreamer0.10-audiosink]0.10.31-3+nmu2
ii  gstreamer0.10-x   0.10.36-1.1
ii  iso-codes 3.50-1
ii  libart-2.0-2  2.3.21-2
ii  libatk1.0-0   2.10.0-2
ii  libbonobo2-0  2.32.1-3
ii  libbonoboui2-02.24.5-2
ii  libc6 2.17-97
ii  libcairo2 1.12.16-2
ii  libdbus-1-3   1.6.18-2
ii  libdbus-glib-1-2  0.100.2-1
ii  libgcc1   1:4.8.2-12
ii  libgconf2-4   3.2.6-1
ii  libglib2.0-0  2.36.4-1
ii  libgnome2-0   2.32.1-5
ii  libgnomecanvas2-0 2.30.3-2
ii  libgnomeui-0  2.24.5-3
ii  libgnomevfs2-01:2.24.4-4
ii

Bug#735320: phpbb3: Upgrade from 3.0.11-5 to 3.0.12 fails

[Adrian Immanuel Kiess]

Package: phpbb3
Version: 3.0.12-1
Severity: normal

Dear Maintainer,

upgrading phpbb3 from version 3.0.11-5 to version 3.0.12 fails for me with the
following error by apt:

creating database backup in /var/cache/dbconfig-
common/backups/phpbb3_3.0.11-5.mysql.

applying upgrade script for 3.0.11-5 - 3.0.12.
apache2_invoke: configuration phpbb3 not supported in postinst
configured to not write apport reports
  configured to not write apport reports
dpkg: error processing package phpbb3 (--configure):
 subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of phpbb3-l10n:
 phpbb3-l10n depends on phpbb3; however:
  Package phpbb3 is not configured yet.

dpkg: error processing package phpbb3-l10n (--configure):
 dependency problems - leaving unconfigured

Could you please reply with a solution how to fix this?

Thank you very much in advance!

With many greetings,

Adrian Immanuel KIESS



-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.12-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages phpbb3 depends on:
ii  apache2  2.4.6-3
ii  apache2-bin [httpd]  2.4.6-3
ii  dbconfig-common  1.8.47+nmu1
ii  debconf [debconf-2.0]1.5.52
ii  libapache2-mod-php5  5.5.7+dfsg-2
ii  mysql-client 5.5.33+dfsg-1
ii  mysql-client-5.5 [virtual-mysql-client]  5.5.33+dfsg-1
ii  php5 5.5.7+dfsg-2
ii  php5-cli 5.5.7+dfsg-2
ii  php5-gd  5.5.7+dfsg-2
ii  php5-mysql   5.5.7+dfsg-2
ii  sqlite   2.8.17-9
ii  ucf  3.0027+nmu1

Versions of packages phpbb3 recommends:
ii  exim4  4.82-3
ii  exim4-daemon-heavy [mail-transport-agent]  4.82-3
ii  php5-imagick   3.1.2-1

Versions of packages phpbb3 suggests:
ii  mysql-server 5.5.33+dfsg-1
ii  mysql-server-5.5 [virtual-mysql-server]  5.5.33+dfsg-1
iu  phpbb3-l10n  3.0.12-1

-- debconf information:
* phpbb3/database-type: mysql
  phpbb3/admin-pass-requirements:
  phpbb3/db/dbname: phpbb3
  phpbb3/pgsql/admin-user: postgres
  phpbb3/purge: false
  phpbb3/upgrade-backup: true
  phpbb3/remove-error: abort
  phpbb3/db/app-user: phpbb3
  phpbb3/dbconfig-remove:
  phpbb3/admin-pass-ask:
  phpbb3/upgrade-error: abort
  phpbb3/mysql/admin-user: root
  phpbb3/internal/skip-preseed: false
* phpbb3/dbconfig-install: true
  phpbb3/pgsql/method: unix socket
  phpbb3/remote/port:
  phpbb3/admin-pass-mismatch:
  phpbb3/dbconfig-reinstall: false
  phpbb3/pgsql/changeconf: false
  phpbb3/missing-db-package-error: abort
  phpbb3/remote/host:
  phpbb3/pgsql/no-empty-passwords:
  phpbb3/pgsql/manualconf:
  phpbb3/install-error: abort
* phpbb3/dbconfig-upgrade: true
  phpbb3/remote/newhost:
  phpbb3/passwords-do-not-match:
  phpbb3/db/basepath:
  phpbb3/pgsql/authmethod-admin: password
* phpbb3/httpd: apache2
  phpbb3/internal/reconfiguring: false
* phpbb3/mysql/method: unix socket
  phpbb3/admin-pass-generated:
  phpbb3/pgsql/authmethod-user:


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#731754: xmodmap: Does not honour my .Xmodmap at login / gkrellm crashes when xmodmap is executed

[Adrian Immanuel Kiess]

Package: x11-xserver-utils
Version: 7.7+1
Severity: important

Dear Maintainer,

   * What led up to the situation?
 Logging onto X session
  * What exactly did you do (or not do) that was effective (or
 ineffective)?
 startx
   * What was the outcome of this action?
 .Xmodmap settings are not honoured
   * What outcome did you expect instead?
 Working keycode settings

currently xmodmap settings are not honoured at login.

xmodmap has to be executed by hand after logging in ( xmodmap ~/.xmodmap ).

In addition to that, gkrellm crashes when xmodmap is executed by hand, at
first.

( gkrellm seqmentation fault )

Attached is my .Xmodmap file.

With many greetings

Adrian Immanuel KIEß





-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.11-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages x11-xserver-utils depends on:
ii  cpp  4:4.8.1-3
ii  libc62.17-97
ii  libice6  2:1.0.8-2
ii  libx11-6 2:1.6.2-1
ii  libxaw7  2:1.0.11-1
ii  libxcursor1  1:1.1.14-1
ii  libxext6 2:1.3.2-1
ii  libxi6   2:1.7.2-1
ii  libxmu6  2:1.1.1-1
ii  libxmuu1 2:1.1.1-1
ii  libxrandr2   2:1.4.1-1
ii  libxrender1  1:0.9.8-1
ii  libxt6   1:1.1.4-1
ii  libxxf86vm1  1:1.1.3-1

x11-xserver-utils recommends no packages.

Versions of packages x11-xserver-utils suggests:
pn  cairo-5cnone
pn  nickle  none
ii  xorg-docs-core  1:1.7-1

-- no debconf information
! Map umlauts to RIGHT ALT + key
! keycode 108 = Mode_switch
! keycode 113 = Mode_switch
!
keycode 108 = Mode_switch

keysym e = e E EuroSign
keysym c = c C cent
keysym a = a A adiaeresis Adiaeresis
keysym o = o O odiaeresis Odiaeresis
keysym u = u U udiaeresis Udiaeresis
keysym s = s S ssharp

keycode 34 =  bracketleft braceleft udiaeresis  Udiaeresis
keycode 47 =  semicolon   colon odiaeresis  Odiaeresis
keycode 48 =  apostrophe  quotedbl  adiaeresis  Adiaeresis
keycode 20 =  minus  underscore ssharp

keycode 24 = q Q at
keycode 11 =  2 at twosuperior oneeighth
keycode 12 = 3 numbersign twosuperior
keycode 16 = 7 ampersand braceleft
keycode 17 = 8 asterisk bracketleft
keycode 18 = 9 parenleft bracketright
keycode 19 = 0 parenright braceright
keycode 35 =  bracketright braceright asciitilde
keycode 49 =  grave asciitilde degree
keycode 58 =  m M mu

keycode 26 = e E EuroSign

Bug#731815: virsh: Unable to start any VM with Intel Xeon X3430 CPU

[Adrian Immanuel Kiess]

Package: libvirt-bin
Version: 1.2.0~rc2-1
Severity: important

Dear Maintainer,

here is the output from my HP ProLiant G6 server:

adrian@g6 (~) % virsh start boxes-unknown
error: Failed to start domain boxes-unknown
error: internal error: Cannot find suitable CPU model for given data

gnome-boxes did not work too I guess since of this bug/error.

Tried to find something with Google and this seem to be a known bug on Red Hat
Linux already; but no solution how to circuit this is given.

Can someone please fix this quickly?

Thank you very much in advance!

With many greetings,

Adrian Immanuel KIEß



-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.11-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages libvirt-bin depends on:
ii  adduser  3.113+nmu3
ii  gettext-base 0.18.3.1-2
ii  init-system-helpers  1.13
ii  libaudit11:2.3.2-2
ii  libavahi-client3 0.6.31-2
ii  libavahi-common3 0.6.31-2
ii  libblkid12.20.1-5.5
ii  libc62.17-97
ii  libcap-ng0   0.7.3-1+b1
ii  libdbus-1-3  1.6.18-2
ii  libdevmapper1.02.1   2:1.02.77-6+b1
ii  libfuse2 2.9.2-4
ii  libgcrypt11  1.5.3-2
ii  libgnutls26  2.12.23-8
ii  libnetcf11:0.2.3-4
ii  libnl-3-200  3.2.21-1
ii  libnl-route-3-2003.2.21-1
ii  libnuma1 2.0.9~rc5-1
ii  libparted0debian12.3-16
ii  libpcap0.8   1.4.0-2
ii  libpciaccess00.13.2-1
ii  librados20.48-2
ii  librbd1  0.48-2
ii  libreadline6 6.2+dfsg-0.1
ii  libsasl2-2   2.1.25.dfsg1-17
ii  libssh2-11.4.3-2
ii  libudev1 204-5
ii  libvirt0 1.2.0~rc2-1
ii  libxen-4.3   4.3.0-3
ii  libxenstore3.0   4.3.0-3
ii  libxml2  2.9.1+dfsg1-3
ii  libyajl2 2.0.4-4
ii  logrotate3.8.6-1

Versions of packages libvirt-bin recommends:
ii  bridge-utils1.5-7
ii  dmidecode   2.12-2
ii  dnsmasq-base2.67-1
ii  ebtables2.0.10.4-3
ii  iproute 1:3.12.0-1
ii  iptables1.4.20-2
ii  libxml2-utils   2.9.1+dfsg1-3
ii  netcat-openbsd  1.105-7
ii  parted  2.3-16
ii  pm-utils1.4.1-13
ii  qemu1.7.0+dfsg-2
ii  qemu-kvm1.7.0+dfsg-2

Versions of packages libvirt-bin suggests:
ii  auditd   1:2.3.2-2
ii  policykit-1  0.105-4
ii  radvd1:1.9.1-1.1
ii  systemtap2.3-1

-- Configuration Files:
/etc/libvirt/qemu.conf [Errno 13] Permission denied: u'/etc/libvirt/qemu.conf'

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#731508: xdm: session will not execute correctly / login works

[Adrian Immanuel Kiess]

Package: xdm
Version: 1:1.1.11-1
Severity: important

Dear Maintainer,

   * What led up to the situation?
 Launching session with xdm/gdm/kdm
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 Credentials given to xdm
   * What was the outcome of this action?
 Login works but session fails to start
   * What outcome did you expect instead?
 Working session

currently xdm, gdm and kdm seem to be broken due to a bug I can not locate.

The Login itself works, but the window manager won't execute and the login due
fails to start.

Running startx works and I get a working X session.

I attached my .xinitrc file.

With many greetings,

Adrian Immanuel KIEß





-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.11-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages xdm depends on:
ii  cpp4:4.8.1-3
ii  debconf [debconf-2.0]  1.5.52
ii  libc6  2.17-97
ii  libpam0g   1.1.3-9
ii  libselinux12.2.1-1
ii  libx11-6   2:1.6.2-1
ii  libxau61:1.0.8-1
ii  libxaw72:1.0.11-1
ii  libxdmcp6  1:1.1.1-1
ii  libxext6   2:1.3.2-1
ii  libxft22.3.1-1
ii  libxinerama1   2:1.1.3-1
ii  libxmu62:1.1.1-1
ii  libxpm41:3.5.10-1
ii  libxrender11:0.9.8-1
ii  libxt6 1:1.1.4-1
ii  lsb-base   4.1+Debian12
ii  procps 1:3.3.4-2
ii  x11-utils  7.7+1
ii  x11-xserver-utils  7.7+1
ii  xbase-clients  1:7.7+4

xdm recommends no packages.

xdm suggests no packages.

-- debconf information:
  xdm/stop_running_server_with_children: false
* shared/default-x-display-manager: xdm
  xdm/daemon_name: /usr/bin/xdm


.xinitrc
Description: inode/symlink

Bug#728945: pulseaudio: [pulseaudio] module.c: Failed to load module module-bluetooth-device

[Adrian Immanuel Kiess]

Package: pulseaudio
Version: 4.0-6+b1
Severity: normal

Dear Maintainer,

   * What led up to the situation?
 Trying to use bluetooth audio headset
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 Blueman-Connect to audio sink
   * What was the outcome of this action?
 Pulseaudio or/and bluetooth are reporting errors in syslog
   * What outcome did you expect instead?
 Working bluetooth headset

currently in Debian/testing bluetooth audio seems to be broken again.

I'm using a Philips bluetooth headset with an Trust bluetooth v2 USB stick.

Using disable=Socket in audio.conf I was able to use the headset once until I
disconnected it again for recharging.

I removed disable=Socket again and this is the currently reported error in
syslog:

Nov  7 05:18:16 g6 bluetoothd[22242]: Adapter /org/bluez/22242/hci0 has been
enabled
Nov  7 05:18:16 g6 bluetoothd[22242]: Unknown command complete for opcode 19
Nov  7 05:18:21 g6 pulseaudio[22259]: [pulseaudio] pid.c: Stale PID file,
overwriting.
Nov  7 05:18:22 g6 bluetoothd[22242]: Endpoint registered: sender=:1.572
path=/MediaEndpoint/HFPAG
Nov  7 05:18:22 g6 bluetoothd[22242]: Endpoint registered: sender=:1.572
path=/MediaEndpoint/HFPHS
Nov  7 05:18:22 g6 bluetoothd[22242]: Endpoint registered: sender=:1.572
path=/MediaEndpoint/A2DPSource
Nov  7 05:18:22 g6 bluetoothd[22242]: Endpoint registered: sender=:1.572
path=/MediaEndpoint/A2DPSink
Nov  7 05:18:22 g6 pulseaudio[22264]: [pulseaudio] pid.c: Daemon already
running.
Nov  7 05:18:25 g6 bluetoothd[22242]: Endpoint unregistered: sender=:1.572
path=/MediaEndpoint/HFPAG
Nov  7 05:18:25 g6 bluetoothd[22242]: Endpoint unregistered: sender=:1.572
path=/MediaEndpoint/HFPHS
Nov  7 05:18:25 g6 bluetoothd[22242]: Endpoint unregistered: sender=:1.572
path=/MediaEndpoint/A2DPSource
Nov  7 05:18:25 g6 bluetoothd[22242]: Endpoint unregistered: sender=:1.572
path=/MediaEndpoint/A2DPSink
Nov  7 05:18:31 g6 bluetoothd[22242]: Host is down (112)
Nov  7 05:18:41 g6 bluetoothd[22242]: Host is down (112)
Nov  7 05:19:34 g6 pulseaudio[22259]: [pulseaudio] module-bluetooth-device.c:
00:22:37:0B:3B:AF is not known.
Nov  7 05:19:34 g6 pulseaudio[22259]: [pulseaudio] module.c: Failed to load
module module-bluetooth-device (argument: address=00:22:37:0B:3B:AF
profile=hsp): initialization failed.
Nov  7 05:19:35 g6 bluetoothd[22242]: Badly formated or unrecognized command:
AT+CSRSF=0,0,0,0,0,7
Nov  7 05:19:38 g6 kernel: [160870.722933] input: 00:22:37:0B:3B:AF as
/devices/virtual/input/input36

Could this please be fixed in testing? :-)

Guess a new pulseaudio version must be committed.

Thank you very much!

Sincerely,

Adrian Immanuel KIEß




-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.10-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages pulseaudio depends on:
ii  adduser   3.113+nmu3
ii  consolekit0.4.6-3+b1
ii  libasound21.0.27.2-3
ii  libasound2-plugins1.0.27-2+b1
ii  libc6 2.17-93
ii  libcap2   1:2.22-1.2
ii  libdbus-1-3   1.6.18-1
ii  libfftw3-single3  3.3.3-5+b1
ii  libgcc1   1:4.8.2-1
ii  libice6   2:1.0.8-2
ii  libltdl7  2.4.2-1.3
ii  liborc-0.4-0  1:0.4.18-1
ii  libpulse0 4.0-6+b1
ii  libsamplerate00.1.8-5
ii  libsm62:1.2.1-2
ii  libsndfile1   1.0.25-7
ii  libspeexdsp1  1.2~rc1.1-1
ii  libstdc++64.8.2-1
ii  libsystemd-login0 204-5
ii  libtdb1   1.2.12-1
ii  libudev1  204-5
ii  libwebrtc-audio-processing-0  0.1-2
ii  libx11-6  2:1.6.2-1
ii  libx11-xcb1   2:1.6.2-1
ii  libxcb1   1.9.1-3
ii  libxtst6  2:1.2.2-1
ii  lsb-base  4.1+Debian12
ii  udev  204-5

Versions of packages pulseaudio recommends:
ii  gstreamer0.10-pulseaudio  0.10.31-3+nmu1
ii  pulseaudio-module-x11 4.0-6+b1
ii  rtkit 0.10-3

Versions of packages pulseaudio suggests:
ii  paman 0.9.4-1
ii  paprefs   0.9.10-1
ii  pavucontrol   1.0-1
ii  pavumeter 0.9.3-4
ii  pulseaudio-utils  4.0-6+b1

-- Configuration Files:
/etc/default/pulseaudio changed:
PULSEAUDIO_SYSTEM_START=0
DISALLOW_MODULE_LOADING=0

/etc/pulse/daemon.conf changed:
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; shm-size-bytes = 0 # setting 

Bug#725884: hdparm: Standby (spindown) timeout option (-S) has no effect

[Adrian Immanuel Kiess]

Package: hdparm
Version: 9.43-1
Followup-For: Bug #725884

Dear Maintainer,

   * What led up to the situation?
 Trying to set APM value on drives
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 Edited hdparm.conf
   * What was the outcome of this action?
 All settings ignored/not applied
   * What outcome did you expect instead?
 Setting APM and write cache value

in Debian/testing currently hdparm still does not seem to work.

I already noticed this a while ago.

All settings (I) tried to be set are not set or not shown by hdparm afterwards.

Maybe hdparm could be updated, because two of my three drives are not getting
recognised still.

Sincerely,

Adrian Immanuel KIESS



-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.10-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages hdparm depends on:
ii  libc6 2.17-93
ii  lsb-base  4.1+Debian12

Versions of packages hdparm recommends:
ii  powermgmt-base  1.31

Versions of packages hdparm suggests:
pn  apmd  none

-- Configuration Files:
/etc/default/hdparm changed:
harddisks=/dev/sda /dev/hdb /dev/hdc
RAID_WORKAROUND=no

/etc/hdparm.conf changed:
quiet 
/dev/sda {
apm = 224
spindown_time = 253
#read_ahead_sect = 64
#write_cache = off
}
/dev/sdb {
apm = 224
spindown_time = 253
#read_ahead_sect = 64
#write_cache = off
}
/dev/sdc {
apm = 224
spindown_time = 253
#read_ahead_sect = 64
#write_cache = off
}


-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#725610: pulseaudio-module-bluetooth: Unable to set bluetooth headset on A2DP mode

[Adrian Immanuel Kiess]

Package: pulseaudio
Version: 4.0-6+b1
Followup-For: Bug #725610

Dear Maintainer,

   * What led up to the situation?
  Switch bluetooth headset to A2DP mode
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 pavucontrol - Switch to A2DP mode
   * What was the outcome of this action?
 Cannot switch to A2DP mode
   * What outcome did you expect instead?
 Clear sound with A2DP

currently A2DP sound with bluetooth stereo headset seems to be broken.

Here the output:

adrian@g6 (~) % /usr/bin/pacmd set-card-profile 2 a2dp
Welcome to PulseAudio! Use help for usage information.
 Failed to set card profile to 'a2dp'.

/var/log/messages output:

Oct 13 15:08:48 g6 pulseaudio[21031]: [pulseaudio] module-bluetooth-device.c:
Profile not connected, refused to switch profile to a2dp

Sincerely,

Adrian Immanuel KIEß





-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.10-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages pulseaudio depends on:
ii  adduser   3.113+nmu3
ii  consolekit0.4.6-3+b1
ii  libasound21.0.27.2-1
ii  libasound2-plugins1.0.27-2+b1
ii  libc6 2.17-93
ii  libcap2   1:2.22-1.2
ii  libdbus-1-3   1.6.14-1
ii  libfftw3-single3  3.3.3-5+b1
ii  libgcc1   1:4.8.1-10
ii  libice6   2:1.0.8-2
ii  libltdl7  2.4.2-1.3
ii  liborc-0.4-0  1:0.4.18-1
ii  libpulse0 4.0-6+b1
ii  libsamplerate00.1.8-5
ii  libsm62:1.2.1-2
ii  libsndfile1   1.0.25-7
ii  libspeexdsp1  1.2~rc1-7
ii  libstdc++64.8.1-10
ii  libsystemd-login0 204-5
ii  libtdb1   1.2.12-1
ii  libudev1  204-5
ii  libwebrtc-audio-processing-0  0.1-2
ii  libx11-6  2:1.6.1-1
ii  libx11-xcb1   2:1.6.1-1
ii  libxcb1   1.9.1-3
ii  libxtst6  2:1.2.2-1
ii  lsb-base  4.1+Debian12
ii  udev  204-5

Versions of packages pulseaudio recommends:
ii  gstreamer0.10-pulseaudio  0.10.31-3+nmu1
ii  pulseaudio-module-x11 4.0-6+b1
ii  rtkit 0.10-3

Versions of packages pulseaudio suggests:
ii  paman 0.9.4-1
ii  paprefs   0.9.10-1
ii  pavucontrol   1.0-1
ii  pavumeter 0.9.3-4
ii  pulseaudio-utils  4.0-6+b1

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#724635: evolution: new IMAP folder gives 'no such folder' error

[Adrian Immanuel Kiess]

Package: evolution
Version: 3.4.4-4+b1
Severity: important

Dear Maintainer,

   * What led up to the situation?
 Creating new IMAP folder
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 [right click]-account-new folder
   * What was the outcome of this action?
 Error: Folder does not exist
   * What outcome did you expect instead?
 Instantly new IMAP folder created

evolution in Debian/testing has problems creating an IMAP folder with
googlemail.

Error message is given, but the folder shows up after restarting evolution.

Sincerely,

Adrian Immanuel KIESS





-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.10-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages evolution depends on:
ii  dbus 1.6.14-1
ii  debconf [debconf-2.0]1.5.51
ii  evolution-common 3.4.4-4
ii  evolution-data-server3.4.4-4
ii  gconf-service3.2.6-1
ii  gconf2   3.2.6-1
ii  gnome-icon-theme 3.8.3-1
ii  libatk1.0-0  2.8.0-2
ii  libc62.17-92+b1
ii  libcairo-gobject21.12.14-4
ii  libcairo21.12.14-4
ii  libcamel-1.2-33  3.4.4-4
ii  libclutter-gtk-1.0-0 1.4.4-3
ii  libdbus-glib-1-2 0.100.2-1
ii  libebackend-1.2-23.4.4-4
ii  libebook-1.2-13  3.4.4-4
ii  libecal-1.2-11   3.4.4-4
ii  libedataserver-1.2-163.4.4-4
ii  libedataserverui-3.0-1   3.4.4-4
ii  libenchant1c2a   1.6.0-10
ii  libevolution 3.4.4-4+b1
ii  libgail-3-0  3.8.4-1
ii  libgconf-2-4 3.2.6-1
ii  libgdata13   0.14.0-1
ii  libgdk-pixbuf2.0-0   2.28.2-1
ii  libglib2.0-0 2.36.4-1
ii  libgnome-desktop-3-2 3.4.2-2
ii  libgtk-3-0   3.8.4-1
ii  libgtkhtml-4.0-0 4.4.4-1
ii  libgtkhtml-editor-4.0-0  4.4.4-1
ii  libgweather-3-0  3.4.1-1+build1
ii  libical0 0.48-2
ii  libmx-1.0-2  1.4.6-2+b1
ii  libnotify4   0.7.6-1
ii  libnspr4 2:4.10-1
ii  libnspr4-0d  2:4.10-1
ii  libnss3  2:3.15.1-1
ii  libnss3-1d   2:3.15.1-1
ii  libpango-1.0-0   1.32.5-5+b1
ii  libpangocairo-1.0-0  1.32.5-5+b1
ii  libsoup2.4-1 2.42.2-6
ii  libsqlite3-0 3.8.0.2-1
ii  libxml2  2.9.1+dfsg1-3
ii  psmisc   22.20-1

Versions of packages evolution recommends:
pn  bogofilter | spamassassin  none
ii  evolution-plugins  3.4.4-4+b1
ii  evolution-webcal   2.32.0-2+b1
ii  yelp   3.8.1-2

Versions of packages evolution suggests:
ii  evolution-dbg   3.4.4-4+b1
ii  evolution-exchange  3.4.4-1
pn  evolution-plugins-experimental  none
ii  gnupg   1.4.14-1
ii  network-manager 0.9.8.0-5

-- debconf information:
  evolution/kill_processes:
  evolution/needs_shutdown:


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#722988: totem: Ability to switch between cover icon and visulation while pllayback

[Adrian Immanuel Kiess]

Package: totem
Version: 3.8.2-3
Severity: wishlist

Dear Maintainer,

I would like to suggest the feature to view the cover icon of the audio file in
the sidebar or one would give the chance to switch or set between cover image
and visualization.

Currently if the audio file embeds an cover icon it is solely shown and I can
not find a way to switch back to the visualization view.

My second suggestion by the way would be to show all MP3 ID tags in the
sidebar. Fields like the URL and license of the file are currently not shown to
me in totem.

Thank you for your kind attention.

Sincerely,

Adrian Immanuel KIESS



-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.10-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages totem depends on:
ii  gnome-icon-theme3.8.3-1
ii  gnome-icon-theme-symbolic   3.8.2.2-2
ii  gsettings-desktop-schemas   3.4.2-3
ii  gstreamer1.0-clutter2.0.6-1
ii  gstreamer1.0-plugins-bad1.0.7-1
ii  gstreamer1.0-plugins-base   1.0.10-1
ii  gstreamer1.0-plugins-good   1.0.10-1
ii  gstreamer1.0-x  1.0.10-1
ii  libatk1.0-0 2.8.0-2
ii  libc6   2.17-92+b1
ii  libcairo-gobject2   1.12.14-4
ii  libcairo2   1.12.14-4
ii  libclutter-1.0-01.14.4-3
ii  libclutter-gst-2.0-02.0.6-1
ii  libclutter-gtk-1.0-01.4.4-3
ii  libcogl-pango12 1.14.0-3
ii  libcogl12   1.14.0-3
ii  libdbus-1-3 1.6.12-1
ii  libdbus-glib-1-20.100.2-1
ii  libegl1-mesa [libegl1-x11]  9.1.6-2
ii  libgdk-pixbuf2.0-0  2.28.2-1
ii  libgirepository-1.0-1   1.36.0-2+b1
ii  libglib2.0-02.36.4-1
ii  libgstreamer-plugins-base1.0-0  1.0.10-1
ii  libgstreamer1.0-0   1.0.10-1
ii  libgtk-3-0  3.8.4-1
ii  libjson-glib-1.0-0  0.16.0-1
ii  libnautilus-extension1a 3.4.2-2
ii  libpango-1.0-0  1.32.5-5+b1
ii  libpangocairo-1.0-0 1.32.5-5+b1
ii  libpeas-1.0-0   1.8.1-1
ii  libtotem-plparser17 3.4.5-1
ii  libtotem0   3.8.2-3
ii  libx11-62:1.6.1-1
ii  libxcomposite1  1:0.4.4-1
ii  libxdamage1 1:1.1.4-1
ii  libxext62:1.3.2-1
ii  libxfixes3  1:5.0.1-1
ii  libxi6  2:1.7.2-1
ii  libxrandr2  2:1.4.1-1
ii  python  2.7.5-4
ii  totem-common3.8.2-3

Versions of packages totem recommends:
pn  grilo-plugins-0.2  none
ii  gstreamer1.0-libav 1:1.0.10-dmo1
ii  gstreamer1.0-plugins-ugly  1.0.9-1
ii  gstreamer1.0-pulseaudio1.0.10-1
ii  totem-plugins  3.8.2-3

Versions of packages totem suggests:
ii  gnome-codec-install  0.4.7+nmu2
ii  totem-mozilla3.8.2-3

Versions of packages totem-gstreamer depends on:
ii  gnome-icon-theme  3.8.3-1
ii  gstreamer0.10-alsa [gstreamer0.10-audiosink]  0.10.36-1.1
ii  gstreamer0.10-esd [gstreamer0.10-audiosink]   0.10.28-3
pn  gstreamer0.10-gnomevfsnone
ii  gstreamer0.10-plugins-bad [gstreamer0.10-audiosink]   0.10.23-7.1
ii  gstreamer0.10-plugins-base0.10.36-1.1
ii  gstreamer0.10-plugins-good [gstreamer0.10-audiosink]  0.10.31-3+nmu1
ii  gstreamer0.10-pulseaudio [gstreamer0.10-audiosink]0.10.31-3+nmu1
ii  gstreamer0.10-x   0.10.36-1.1
ii  iso-codes 3.46-1
ii  libart-2.0-2  2.3.21-2
ii  libatk1.0-0   2.8.0-2
ii  libbonobo2-0  2.32.1-1
ii  libbonoboui2-02.24.3-1
ii  libc6 2.17-92+b1
ii  libcairo2 1.12.14-4
ii  libdbus-1-3   1.6.12-1
ii  libdbus-glib-1-2  0.100.2-1
ii  libgcc1   1:4.8.1-2
ii  libgconf2-4   3.2.6-1
ii  libglib2.0-0  2.36.4-1
ii  libgnome2-0   2.32.1-4
ii  libgnomecanvas2-0 2.30.3-1.2
ii  libgnomeui-0  2.24.5-2
ii  libgnomevfs2-01:2.24.4-3
ii  libgstreamer

Bug#722680: referencer: Unable to import directory

[Adrian Immanuel Kiess]

Package: referencer
Version: 1.2.1-1+b1
Severity: important

Dear Maintainer,

   * What led up to the situation?
 Stumbled over referencer with apt-cache
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 Tried to import documents with Documents-Add Folder
   * What was the outcome of this action?
 Received exeption: No such file or directory
   * What outcome did you expect instead?
 Importing the documents

my first try-out with referencer ended with this error by importing new
documents:

Exception: No such file or directory
The opration underway was: executing UI action

I attached a screenshot.

I guess it would be a usefull program since i already saw the LyX button. :-)

Sincerely,

Adrian Immanuel KIESS




-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (800, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.10-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages referencer depends on:
ii  libatkmm-1.6-12.22.7-2
ii  libboost-regex1.54.0  1.54.0-2
ii  libc6 2.17-92+b1
ii  libgcc1   1:4.8.1-2
ii  libgconfmm-2.6-1c22.28.0-1
ii  libgdk-pixbuf2.0-02.28.2-1
ii  libglib2.0-0  2.36.4-1
ii  libglibmm-2.4-1c2a2.36.2-1
ii  libgtk2.0-0   2.24.20-1
ii  libgtkmm-2.4-1c2a 1:2.24.4-1
ii  libpangomm-1.4-1  2.34.0-1
ii  libpoppler-glib8  0.18.4-8
ii  libpython2.7  2.7.5-5
ii  libsigc++-2.0-0c2a2.2.10-0.2
ii  libstdc++64.8.1-2
ii  libxml2   2.9.1+dfsg1-3

referencer recommends no packages.

referencer suggests no packages.

-- no debconf information
attachment: Screenshot from 2013-09-13 10:36:16.png

Bug#722558: nautilus: Properties-Open With: Can not choose binary other than given in list

[Adrian Immanuel Kiess]

Package: nautilus
Version: 3.4.2-2
Severity: wishlist

Dear Maintainer,

   * What led up to the situation?
 Trying to open video with mplayer
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 Selecting Open With in menu to choose other player than default one
   * What was the outcome of this action?
 Not able to choose the wanted video player
   * What outcome did you expect instead?
 To make mplayer the default player

I want to submit a suggestion to restore old behavior of nautilus. It is not
possible anymore to select a custom binary for execution in Properties-Open
With. I know there is alacarte and one could add an entry there -- but I even
tried this and had problems with it. Maybe it would be possible to add/merge
this function of alacarte with the nautilus Open With dialog or offer there an
functionaly to directly open alacarte with the right paramters -- the file type
for example.

There should be also the chance to select a binary not linked with the
currently selected file type/mime type.

In addition it also hard to find out the %U paramter for entries in alacarte,
one would first have to view another given entry of alacarte because the help
of alacarte also is not working right now for with default installation.

Sincerely,

Adrian Immanuel KIESS



-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (800, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.10-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages nautilus depends on:
ii  desktop-file-utils 0.22-1
ii  gsettings-desktop-schemas  3.4.2-3
ii  gvfs   1.16.3-1
ii  libatk1.0-02.8.0-2
ii  libc6  2.17-92+b1
ii  libcairo-gobject2  1.12.14-4
ii  libcairo2  1.12.14-4
ii  libexempi3 2.2.1-1
ii  libexif12  0.6.21-1
ii  libgail-3-03.8.4-1
ii  libgdk-pixbuf2.0-0 2.28.2-1
ii  libglib2.0-0   2.36.4-1
ii  libglib2.0-data2.36.4-1
ii  libgnome-desktop-3-2   3.4.2-2
ii  libgtk-3-0 3.8.4-1
ii  libnautilus-extension1a3.4.2-2
ii  libnotify4 0.7.5-2
ii  libpango-1.0-0 1.32.5-5+b1
ii  libpangocairo-1.0-01.32.5-5+b1
ii  libselinux12.1.13-2
ii  libtracker-sparql-0.16-0   0.16.1-2
ii  libx11-6   2:1.6.1-1
ii  libxml22.9.1+dfsg1-3
ii  nautilus-data  3.4.2-2
ii  shared-mime-info   1.0-1+b1

Versions of packages nautilus recommends:
ii  brasero3.8.0-2
ii  eject  2.1.5+deb1+cvs20081104-13
ii  gnome-icon-theme-symbolic  3.8.2.2-2
ii  gnome-sushi3.8.1-1
ii  gvfs-backends  1.16.3-1
ii  librsvg2-common2.36.4-2

Versions of packages nautilus suggests:
ii  eog3.8.2-1
ii  epdfview [pdf-viewer]  0.1.8-3
ii  evince [pdf-viewer]3.4.0-3.1+b1
ii  gv [pdf-viewer]1:3.7.4-1
ii  mupdf [pdf-viewer] 1.2-2
ii  okular [pdf-viewer]4:4.10.5-1
ii  totem  3.8.2-3
ii  tracker0.16.1-2
ii  vlc [mp3-decoder]  1:2.0.1-0.0
ii  vlc-nox [mp3-decoder]  1:2.0.1-0.0
ii  xdg-user-dirs  0.15-1
ii  xpdf [pdf-viewer]  3.03-11

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#722590: totem: Totem resizes window when closing the playlist

[Adrian Immanuel Kiess]

Package: totem
Version: 3.8.2-3
Severity: wishlist

Dear Maintainer,

   * What led up to the situation?
 Opening and closing the playlist in totem with the playlist button on the
bottom right corner
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
 
   * What was the outcome of this action?
 Totem window was resized to the size excluding the playlist
   * What outcome did you expect instead?
 Totem retains original window size/state

I would like to point out that totem resizes the whole window by closing the
playlist, even still in version 3.8.2.
Would it be possible to let totem stay in original window size when closing the
playlist? I guess this
is the behavior that would be expected.

Sincerely,

Adrian Immanuel KIESS




-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (800, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.10-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages totem depends on:
ii  gnome-icon-theme3.8.3-1
ii  gnome-icon-theme-symbolic   3.8.2.2-2
ii  gsettings-desktop-schemas   3.4.2-3
ii  gstreamer1.0-clutter2.0.6-1
ii  gstreamer1.0-plugins-bad1.0.7-1
ii  gstreamer1.0-plugins-base   1.0.10-1
ii  gstreamer1.0-plugins-good   1.0.10-1
ii  gstreamer1.0-x  1.0.10-1
ii  libatk1.0-0 2.8.0-2
ii  libc6   2.17-92+b1
ii  libcairo-gobject2   1.12.14-4
ii  libcairo2   1.12.14-4
ii  libclutter-1.0-01.14.4-3
ii  libclutter-gst-2.0-02.0.6-1
ii  libclutter-gtk-1.0-01.4.4-3
ii  libcogl-pango12 1.14.0-3
ii  libcogl12   1.14.0-3
ii  libdbus-1-3 1.6.12-1
ii  libdbus-glib-1-20.100.2-1
ii  libegl1-mesa [libegl1-x11]  9.1.6-2
ii  libgdk-pixbuf2.0-0  2.28.2-1
ii  libgirepository-1.0-1   1.36.0-2+b1
ii  libglib2.0-02.36.4-1
ii  libgstreamer-plugins-base1.0-0  1.0.10-1
ii  libgstreamer1.0-0   1.0.10-1
ii  libgtk-3-0  3.8.4-1
ii  libjson-glib-1.0-0  0.16.0-1
ii  libnautilus-extension1a 3.4.2-2
ii  libpango-1.0-0  1.32.5-5+b1
ii  libpangocairo-1.0-0 1.32.5-5+b1
ii  libpeas-1.0-0   1.8.1-1
ii  libtotem-plparser17 3.4.5-1
ii  libtotem0   3.8.2-3
ii  libx11-62:1.6.1-1
ii  libxcomposite1  1:0.4.4-1
ii  libxdamage1 1:1.1.4-1
ii  libxext62:1.3.2-1
ii  libxfixes3  1:5.0.1-1
ii  libxi6  2:1.7.2-1
ii  libxrandr2  2:1.4.1-1
ii  python  2.7.5-4
ii  totem-common3.8.2-3

Versions of packages totem recommends:
pn  grilo-plugins-0.2  none
ii  gstreamer1.0-libav 1:1.0.10-dmo1
ii  gstreamer1.0-plugins-ugly  1.0.9-1
ii  gstreamer1.0-pulseaudio1.0.10-1
ii  totem-plugins  3.8.2-3

Versions of packages totem suggests:
ii  gnome-codec-install  0.4.7+nmu2
ii  totem-mozilla3.8.2-3

Versions of packages totem-gstreamer depends on:
ii  gnome-icon-theme  3.8.3-1
ii  gstreamer0.10-alsa [gstreamer0.10-audiosink]  0.10.36-1.1
ii  gstreamer0.10-esd [gstreamer0.10-audiosink]   0.10.28-3
pn  gstreamer0.10-gnomevfsnone
ii  gstreamer0.10-plugins-bad [gstreamer0.10-audiosink]   0.10.23-7.1
ii  gstreamer0.10-plugins-base0.10.36-1.1
ii  gstreamer0.10-plugins-good [gstreamer0.10-audiosink]  0.10.31-3+nmu1
ii  gstreamer0.10-pulseaudio [gstreamer0.10-audiosink]0.10.31-3+nmu1
ii  gstreamer0.10-x   0.10.36-1.1
ii  iso-codes 3.46-1
ii  libart-2.0-2  2.3.21-2
ii  libatk1.0-0   2.8.0-2
ii  libbonobo2-0  2.32.1-1
ii  libbonoboui2-02.24.3-1
ii  libc6 2.17-92+b1
ii  libcairo2 1.12.14-4
ii  libdbus-1-3   1.6.12-1
ii  libdbus-glib-1-2  0.100.2-1
ii  libgcc1   1:4.8.1-2
ii  libgconf2-4   3.2.6-1
ii  libglib2.0-0  2.36.4-1
ii  libgnome2-0   2.32.1-4
ii  libgnomecanvas2-0

Bug#721487: mysql-server: standard mysql server installation does not listen on tcp6 protocol

[Adrian Immanuel Kiess]

Package: mysql-server
Version: 5.5.31+dfsg-1
Severity: normal

Dear Maintainer,

   * What led up to the situation?
 Trying to connect to mysql via perl script using DBI interface
   * What exactly did you do (or not do) that was effective (or
 Executing the perl script
   * What was the outcome of this action?
 No database connection
   * What outcome did you expect instead?
 Database connection :-)

my default installtion of mysql does not listen via IPv6 protocol for
connections, only via IPv4 protocol.

Here is the output of netstat:

root@g6 (~) % netstat --inet --listen -p -n | grep mysql
tcp0  0 127.0.0.1:3306  0.0.0.0:*   LISTEN
27020/mysqld
root@g6 (~) % netstat --inet6 --listen -p -n | grep mysql
(no output given)

Would it be possible to make mysql listen on IPv6 with a special configuration
option (I don't know) or is it a bug? I was not not able to find the option in
the default configuration files.

Sincerely,

Adrian Immanuel KIESS



-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.10-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages mysql-server depends on:
ii  mysql-server-5.5  5.5.31+dfsg-1

mysql-server recommends no packages.

mysql-server suggests no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#690004: lyx: letter (g-brief) does NOT depend on europs.sty (which is gone)

[Adrian Immanuel Kiess]

Package: lyx
Version: 2.0.3-3
Followup-For: Bug #690004

Dear Maintainer,

I can confirm this bug with g-brief2 on Debian/testing.
Still can use the document file, but the error message appears everytime you
open the document.

Sincerely,

Adrian Immanuel KIESS



-- System Information:
Debian Release: 7.0
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages lyx depends on:
ii  libboost-regex1.49.01.49.0-3.2
ii  libboost-signals1.49.0  1.49.0-3.2
ii  libc6   2.13-37
ii  libenchant1c2a  1.6.0-7
ii  libgcc1 1:4.7.2-5
ii  libmythes-1.2-0 2:1.2.2-1
ii  libqtcore4  4:4.8.2+dfsg-11
ii  libqtgui4   4:4.8.2+dfsg-11
ii  libstdc++6  4.7.2-5
ii  lyx-common  2.0.3-3
ii  xdg-utils   1.1.0~rc1+git20111210-6
ii  zlib1g  1:1.2.7.dfsg-13

Versions of packages lyx recommends:
ii  dvipng   1.14-1+b1
ii  elyxer   1.2.3-1
ii  epdfview [pdf-viewer]0.1.8-3
ii  evince [pdf-viewer]  3.4.0-3.1
ii  fonts-lyx2.0.3-3
ii  ghostscript  9.05~dfsg-6.3
ii  gv [pdf-viewer]  1:3.7.3-1
ii  imagemagick  8:6.7.7.10-5
ii  latex2html   2008-debian1-7
ii  okular [pdf-viewer]  4:4.8.4-3+b1
ii  poppler-utils0.18.4-5
ii  preview-latex-style  11.86-11
ii  psutils  1.17.dfsg-1
ii  tex4ht   20090611-1.1+b1
ii  texlive-fonts-recommended2012.20120611-5
ii  texlive-generic-extra2012.20120611-2
ii  texlive-generic-recommended  2012.20120611-5
ii  texlive-latex-extra  2012.20120611-2
ii  texlive-latex-recommended2012.20120611-5
ii  texlive-science  2012.20120611-2
ii  xpdf [pdf-viewer]3.03-10

Versions of packages lyx suggests:
ii  chktex  1.6.4-4
pn  dvipost none
ii  etoolbox2.1-1
pn  gnuhtml2latex   none
ii  groff   1.21-9
ii  inkscape0.48.3.1-1.3
pn  latex2rtf   none
ii  librsvg2-bin2.36.1-1
ii  libtiff-tools   4.0.2-6
pn  linuxdoc-tools  none
pn  lyx-dbg none
pn  noweb   none
ii  rcs 5.8.1-1
pn  sgmltools-lite  none
ii  texlive-xetex   2012.20120611-5
pn  writer2latexnone
ii  wv  1.2.9-3

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org