Package: k3b
Version: 0.11.20-1
Severity: minor
The package "normalize" have been renamed to "normalize-audio",
but the k3b package still suggests it using the old name, which
is no longer available.
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (700, 'testing')
Package: kbugbuster
Version: 4:3.3.1-2
Severity: grave
Justification: renders package unusable
package is uninstallable: it depends on libkcal1, which does not exists
(it may have been renamed to libkcal2a which is installed on my system?)
Of course this breaks kdesdk and in turn kde-devel.
-
Package: mozilla-tabextensions
Version: 2.1.2006031301-4
Severity: important
With tabextension installed and set to open in new tab the links that
would be opened in new window, Firefox (actually "iceweasel") fails to
open (at least) some links.
For example, I have a page which contains the f
Package: installation-reports
Boot method: CD
Image version: Etch Beta 3 release, netinst CD
Date: Thu Sep 21, 2006
Machine:any
Processor: x86
Memory:
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot work
Package: denyhosts
Version: 2.6-10
Severity: normal
Dear Maintainer,
on one of my systems, denyhosts fails to start. Worse yet,
when starting the init script reports "ok" and nothing is
written either on the screen or on any log file.
But it does not really start, as can easily be verified by
Package: gmpc
Version: 11.8.16-6
Severity: grave
Justification: renders package unusable
Dear Maintainer,
after installation of some system updates (last week) suddenly
gmpc have started to fail to start (crash immediately) with the
following message:
$ gmpc
(gmpc:4432): MMKeysPlugin-WARNING
Hi,
nevermind. Though I have not understood which package
have created the problem and which one fixed it, after
the installation of new updates today the problem has
gone.
This bug can be closed.
Ciao,
Paolo.
--
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...
Hi,
I can confirm every bit of this report!
I too have tried to manually run the failing rpcclient
command and can confirm that removing the "NULL" entry
( 's/PPD:NULL:ADOBEPS4.HLP:/PPD:ADOBEPS4.HLP/' ) makes
it work just fine.
It looks like cupsaddsmb should not add that "NULL".
Why does it
Package: wodim
Version: 9:1.1.11-2
Severity: important
Dear Maintainer,
At least when using it from k3b interface (did not try doing that
directly from CLI), wodim fails to burn dual layer DVDs.
When the image to write is larger than single layer capacity, writing
starts and goes on until it ha
Package: k3b
Version: 2.0.2-6
Severity: important
Dear Maintainer,
by default, K3B uses "wodim" to write DVD (iso) images.
Unfortunately,it looks like wodim is buggy and fails when trying
to burn dual layer DVDs (at least when using it from k3b; I have
not tried to do it from CLI).
When the
Package: sox
Version: 14.4.1-5
Severity: important
Tags: upstream
Dear Maintainer,
to reproduce the bug, try to do something like this:
cat some_large_long_audio_file.wav | /usr/bin/sox -V3 -t wav - -t wav -r 384000
-b 32 --buffer=8192 - gain -h rate -v -M -b 90.7 384000 > test_out.wav
** cut&p
Package: sox
Version: 14.4.1-5
Followup-For: Bug #823417
Dear Maintainer,
update: it looks like the file is not actually truncated, but only the file
header is wrong/corrupted. Some player stops at the (wrong) reported lenght,
while other goes beyond it to the actual end of the file.
E.g., while
Package: sox
Version: 14.4.1-5
Followup-For: Bug #823417
Dear Maintainer,
update #2
To add more info, I've done some more tests using output formats different from
"wav". I've first tried with sox own format ("sox"), and in that case the
problem does not appear!
Then I have tried to use "aiff",
Package: flashplugin-nonfree
Version: 9.0.115.0.1~bpo40+1
Followup-For: Bug #455283
not much more to say... after the last flashplugin-nonfree
update, the plugin no longer works in Konqueror.
The page loads displaying only grey backround(s) in place of
any flash content. When leaving the page
Package: vpnc
Version: 0.5.1r334-1
Severity: normal
Hi,
vpnc package should recommend (or perhaps depend on?)
the package "opensc", which provides the (required?)
command:
/usr/bin/pkcs11-tool
Without that it is impossible to connect to (at least
some) Cisco based VPNs using "kvpnc".
Don
Package: kvpnc
Version: 0.9.0-1
Severity: normal
Hi,
kvpnc package should recommend (or perhaps depend on?)
the package "opensc", which provides the command:
/usr/bin/pkcs11-tool
Without that it is impossible to connect to (at least
some) Cisco based VPNs (using "vpnc").
Don't know if it is
Package: linuxlogo
Version: 5.03-2
Severity: normal
Hi,
I have a script which runs this cmd line:
linux_logo -L0 -g -F"#N #M #T, #R RAM, #B Bogomips Total\n#O Version #V,
Compiled #C\n#U - #L"
this was working just fine with Sarge and Etch... after upgrading to Lenny,
it does not work anymore
Hi,
I have a (similar/related?) problem.
On a Compaq Presario 2700 laptop I was running Etch with 2.6.24 Kernel
from Lenny, and had no problem.
Then I decided to upgrade to Lenny... and though everything seemed ok
(alsa modules loaded, all volumes ok in alsamixer, etc), sound was gone.
I could
Package: wodim
Version: 9:1.1.2-1
Severity: normal
Hi,
Please add support for Yamaha Audio Master Quality Recording
(driveropts=audiomaster) on Plextor drives too.
Plextor have licensed the technology and included it in its
"Premium" series (currently Premium II). Unfortunately, as far
as I can
Hi,
I have done a quick hack test...
I downloaded & hacked the sources for the last version of cdrkit
(BTW it was ver. 2.01.01a31 by Jörg Schilling, not wodim ones) and
simply copied the audiomaster check from the "mmc_isyamaha" section
to the "mmc_isplextor" one, as for the following patch:
Hi,
I had a suspect... in the first test I have used an old CDRW. So I tryed
again using a new CDR... got no errors this time!
# /opt/schily/bin/cdrecord -v
dev=1000,0,0 -eject -driveropts=audiomaster,noburnfree -speed=
Package: linux-2.6
Version: 2.6.32-9
Severity: normal
Hi,
the ALSA virtual loopback sound card module, snd-aloop, is
missing from recent kernels!!!
(it was available on Lenny's kernel:
/lib/modules/2.6.26-2-686/updates/alsa/drivers/snd-aloop.ko
)
Any idea why it disappared? The sources are in
Package: alsa-source
Version: 1.0.21+dfsg-2
Followup-For: Bug #531668
Bug confirmed. I can't build it on any 2.6.3x Debian kernel. :(
I need to rebuild ALSA 'cause I do NEED the "snd-aloop" virtual
loopback device module and that's missing from stock kernels (I
submitted a specifi bug report fo
Hi,
since kernel 2.6.29 it have become impossible to (re)build the ALSA drivers
from the "alsa-source" package via module-assistant or whatever (there are
specific open bug reports about that).
Could it be that it depends on this same problem?
Ciao,
Paolo.
--
Package: scsiadd
Version: 1.96-1.1
Followup-For: Bug #522542
Hi,
I have updated scsiadd to the latest available version, but it still
does not work with new kernels, looking for /proc/scsi:
scsiadd:scsiadd(): could not open /proc/scsi/scsi (w): No such file or directory
-- System Information:
D
Package: sox
Version: 14.3.0-1.1
Followup-For: Bug #546944
Hi,
I can confirm the bug. Same problem here.
However, I get the problem also if I don't use sox to directly play
anything but just for some processing.
Please have a look at the following post where I first described the
problem:
Package: chromium
Version: 12.0.742.91~r87961-1
Severity: normal
Hi,
weird problems with PDF and mozplugger.
(actually, I don't know if the problem affects only PDF or also other/all
mozplugger supported formats as well).
mozplugger works just fine with any other browser, *INCLUDING chrome*, o
Package: dbab
Version: 1.3.2-2
(may be related to Bug #946977)
In dbab version 1.3.2-2, the one currently included in Debian stable
(Buster), the automatic list update script try to access the remote
server via plain http, though the server is now using https only, and
a "permanent redirect" i
28 matches
Mail list logo