Hi,
On 2023-05-07 19:22, Jiaxun Yang wrote:
>
>
> > 2023年5月6日 01:58，YunQiang Su 写道：
> >
> > Aurelien Jarno 于2023年5月6日周六 04:30写道：
> >>
> >> Source: linux
> >> Version: 5.10.178-3
> >> Severity: important
> >> X-Debbugs-Cc:
Hi,
On 2023-06-24 11:46, Aurelien Jarno wrote:
> Hi,
>
> On 2023-06-19 09:37, Huacai Chen wrote:
> > On Sun, Jun 18, 2023 at 5:24 PM Aurelien Jarno wrote:
> > >
> > > Hi,
> > >
> > > On 2023-05-07 19:22, Jiaxun Yang wrote:
> &
Source: linux
Version: 6.5~rc7-1~exp1
Severity: normal
Tags: upstream
Starting with kernel 6.5, the cpufreq-dt-platdev driver can be built as
module [1]. This is done through the CPUFREQ_DT_PLATDEV config, which is
selected by CPUFREQ_DT. However the cpufreq-dt-platdev is not
autoloaded.
On the c
On 2023-07-19 16:28, Jiaxun Yang wrote:
>
>
> 在 2023/7/8 18:11, Aurelien Jarno 写道:
> [...]
> > Any news about that? We need to be able to run the latest stable kernel
> > on the build daemon.
>
> Hi all,
>
> After receiving more reports on that patch I thin
pn firmware-netxen
pn firmware-qlogic
pn firmware-ralink
pn firmware-realtek
pn xen-hypervisor
-- debconf information excluded
From: Aurelien Jarno
Date: Fri Aug 16 07:01:50 2013 +0200
Subject: Revert "s390: Use direct ktime path for s
ke the support for
older boards. Have you check it works both for lemote 3a-itx-a1101 and
loongson ls3a-rs780e-1w boards?
Thanks,
Aurelien
--
Aurelien Jarno GPG: 4096R/1DDD8C9B
aurel...@aurel32.net http://www.aurel32.net
You can use the command ischroot from the debianutils package.
Aurelien
--
Aurelien Jarno GPG: 4096R/1DDD8C9B
aurel...@aurel32.net http://www.aurel32.net
signature.asc
Description: PGP signature
rnel?
Anyway I really doubt the problem the problem is in usbutils (a set of
programs to display USB devices properties), so I am reassigning the bug
to the linux package with this mail.
Aurelien
--
Aurelien Jarno GPG: 4096R/1DDD8C9B
aurel...@aurel32.net htt
break grub2 on ppc64el [1]. I think it's a legitimate
use case.
[1]
https://buildd.debian.org/status/fetch.php?pkg=grub2&arch=ppc64el&ver=2.02~beta2-23&stamp=1431706310
--
Aurelien Jarno GPG: 4096R/1DDD8C9B
aurel...@aurel32.net http://www.
imply download all 3 files and run './bpf_analysis.py'
This patch relies on R2 instructions, and thus the Linux kernel fails to
build when targetting non-R2 CPUs. See for example:
https://buildd.debian.org/status/fetch.php?pkg=linux&arch=mipsel&ver=4.2%7Erc6-1%7Eexp1&stamp=143948
--
Aurelien Jarno GPG: 4096R/1DDD8C9B
aurel...@aurel32.net http://www.aurel32.net
On 2017-04-11 03:35, Ben Hutchings wrote:
> Control: tag -1 moreinfo
>
> On Mon, 10 Apr 2017 10:48:45 +0200 Aurelien Jarno
> wrote:
> [...]
> > Unfortunately I have been pointed on the libc-alpha mailing list that
> > it doesn't work if another file which i
Source: linux
Version: 4.9.25-1
Severity: important
User: debian-ad...@lists.debian.org
Usertags: needed-by-DSA-Team
Hi,
DSA uses NFS through autofs, and machines using the Stretch kernel are
affected by the following bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1427493
Basically each tim
gzilla.kernel.org/show_bug.cgi?id=112021
As it the root of the problem is a BIOS issue, I would first suggest to
upgrade it. If it doesn't work the next step is probably to use the
blacklist implemented in the dell-smm-hwmon module to disable the fans
when running on a Dell system similar to yours.
In anycase this is definitely a kernel related issue, so I am
reassigning the bug.
Regards,
Aurelien
--
Aurelien Jarno GPG: 4096R/1DDD8C9B
aurel...@aurel32.net http://www.aurel32.net
Source: linux
Version: 3.16.36-1+deb8u1
Severity: normal
Tags: patch
User: debian-ad...@lists.debian.org
Usertags: needed-by-DSA-Team
Dear Maintainer,
The following fix went to kernel 3.16.7-ckt25-1, as it was Cc:ed to
sta...@vger.kernel.org:
| commit 9dbe6cf941a6fe82933aef565e4095fb10f65023
| A
Source: linux
Version: 4.7.6-1
Severity: normal
The x32 preadv/pwritev syscalls have been broken in kernel 4.7-rc1 by
this commit:
| commit 482dd2ef124484601adea82e5e806e81e2bc5521
| Author: Christoph Hellwig
| Date: Thu Apr 7 22:43:59 2016 +0200
|
| x86/syscalls: Wire up compat readv2/wri
g = <0x7e30 0x100>;
|interrupts = <2 30>;
|clocks = <&clocks BCM2835_CLOCK_EMMC>;
|status = "disabled";
|};
This work since at least kernel 4.8.4-1~exp1.
Aurelien
--
Aurelien Jarno GPG: 4096R/1DDD8C9B
aurel...@aurel32.net http://www.aurel32.net
d, * ld-x86-64/pie1.d: Update.
I am not sure the powerpc and ppc64el are actually due to the same bug
in binutils.
Aurelien
--
Aurelien Jarno GPG: 4096R/1DDD8C9B
aurel...@aurel32.net http://www.aurel32.net
ttps://bugzilla.redhat.com/show_bug.cgi?id=1662602
> https://bugzilla.kernel.org/show_bug.cgi?id=202123
>
> https://lore.kernel.org/lkml/2019033500.840117...@linutronix.de/
I confirm the patch above fixes the glibc issues.
Aurelien
--
Aurelien Jarno GPG: 409
Source: linux
Version: 4.14.13-1
Severity: normal
Tags: upstream
When ASLR is enabled (which is the default), the Linux kernel on at
least alpha, arm64, mips64el, ppc64el, ppc64, s390x and sparc64 might
not provide a heap to the program. This is the case for example when
the program is run through
Source: linux
Version: 4.9.82-1+deb9u2
Severity: critical
Justification: causes serious data corruption
DSA has installed the latest security kernel (4.9.82-1+deb9u2) on the
Debian POWER8 machines running ppc64el. While they boot correctly, then
programs segfault randomly (apt, sbuild, systemd, et
tag 891249 + fixed-upstream
thanks
On 2018-02-26 11:01, Breno Leitao wrote:
> Hi,
>
> On 02/23/2018 03:52 PM, Aurelien Jarno wrote:
>
> > DSA has installed the latest security kernel (4.9.82-1+deb9u2) on the
> > Debian POWER8 machines running ppc64el. While t
Distribution: stretch-security
Urgency: medium
Maintainer: Debian Kernel Team
Changed-By: Aurelien Jarno
Description:
acpi-modules-4.9.0-6-686-di - ACPI support modules (udeb)
acpi-modules-4.9.0-6-686-pae-di - ACPI support modules (udeb)
acpi-modules-4.9.0-6-amd64-di - ACPI support modules (udeb)
affs
rives were going
in a bad state when receiving the command, creating a SeekComplete Error
message in the kernel logs.
Aurelien
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :' : Debian developer | Electrical Engineer
`. `' [EMAIL PROTECTED]
t
is included in local-vars.mk, but it looks like this file is not
included anymore.
architecture.mk convert the architecture name in case the name in Debian
and the name in the kernel tree is different, which is the case for
powerpc (ppc), and hppa (parisc).
Aurelien
--
.''`.
iles...
I would guess that mips-tools will need to adapt to the new setup.
Well mips-tools is only calling make-kpkg, that should work with both
old and new kernels. Moreover the change Sven has done only concerns
powerpc, not hppa.
--
.''`. Aurelien Jarno | GPG:
Thiemo Seufer a écrit :
On Mon, Feb 06, 2006 at 10:18:41PM +0100, Aurelien Jarno wrote:
Martin Michlmayr a écrit :
Package: mips-tools
Version: 2.4.27-11.040815-2
Severity: serious
mips-tools doesn't build on powerpc and hppa; probably a bug in
kernel-package or something -- needs
Free Ekanayaka a écrit :
BB> * wanted:
BB> - amd64-k8
BB> - emt64-$bla
Sounds very good. When are we going to have that? I am currently using
the amd64 .debs with --force-architecture.
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :&#
/ #
I have got the same problem on sparc32 the other day. It looks like the
problem is in initramfs-tools, as using yaird fixed the problem.
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :' : Debian developer | Electrical Engineer
`. `' [EMAIL
relien
[1] http://lists.debian.org/debian-devel-announce/2006/03/msg7.html
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :' : Debian developer | Electrical Engineer
`. `' [EMAIL PROTECTED] | [EMAIL PROTECTED]
`-people.debian.
Matthias Klose a écrit :
Steve Langasek writes:
On Wed, Apr 05, 2006 at 11:06:21PM +0200, Aurelien Jarno wrote:
A few weeks ago, the 2.4 kernels have been declared "deprecated" [1]. I
would like to know what does this exactly mean:
- That users are advised not to use them?
- Tha
,
but rather kfreebsd-source, and thus the linux users won't be annoyed
anymore with apt-get recommending to install kfreebsd-source when
installing a linux kernel related package.
Cheers,
Aurelien
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :' : Debian
t the results.
I have just installed the 32-bit non-smp version on my machine, and it
works well. This machine is running testing (well now a bit outdated),
but the kernel was still the one from sarge. I don't know what I could
tell more, if I have forget something, just ask
Bye,
Aureli
ve done for the public GNU/kFreeBSD machine (see
http://io.debian.net). If you are interested by the scripts or if you
need help, don't hesitate to contact me.
Bye,
Aurelien
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :' : Debian GNU/Linux developer |
be merged in the kernel before the etch release.
Bye,
Aurelien
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :' : Debian developer | Electrical Engineer
`. `' [EMAIL PROTECTED] | [EMAIL PROTECTED]
`-people.debian.org/~aur
y
P/M), so the problem doesn't seems specific to Nvidia cards.
Bye,
Aurelien
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :' : Debian developer | Electrical Engineer
`. `' [EMAIL PROTECTED] | [EMAIL PROTECTED]
`-people.d
seem to be to change the yaird Default.conf,
but I don't know if that's the right way.
I have the same problem on an ATI card (ATI Rage Mobility), and the same
fix works. Thanks for the hint.
Bye,
Aurelien
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :&#x
n favor of a switch to 2.6.26, I just
want to emphasize that it can have a bigger impact than expected on the
release planning.
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :' : Debian developer | Electrical Engineer
`. `
* lots of fixed 2.6.25 x86 regressions
> * request_firmware() work reenabling ip3, acenic and keyspan
> * arm, mips fixes
> * closing bunch of x86 regressions
That's nice to mention the fixed regressions (actually twice), but
that's not fair to not mention the new (unknown yet) regression
Steve Langasek a écrit :
> Hi Aurelien,
Hi!
> On Mon, Jul 07, 2008 at 06:19:01PM +0200, Aurelien Jarno wrote:
>
>> - The switch to linux-libc-dev 2.6.25 is the reason why glibc currently
>> FTBFS on hppa (due to a timeout in a test). Unfortunately I don't know
>
On Sat, Jul 26, 2008 at 01:52:27PM -0700, Martin Michlmayr wrote:
> * Aurelien Jarno <[EMAIL PROTECTED]> [2008-02-26 12:07]:
> > > The following modules are built into the core image and
> > > probably shouldn't be:
> > >
> > > scsi_mod
> &g
and support for at least 256MB of RAM.
But I also think it is too close to the freeze, as it also means change
to d-i. Also the qemu version in lenny doesn't support those platforms,
and the SVN version is currently not a good idea for a stable
distribution. At least the transition to TCG has t
Package: linux-2.6
Version: 2.6.26-5
Severity: important
My machine has an Intel Xeon E3110 CPU running at 3.0GHz. When
acpi-cpufreq is loaded, only two frequencies are available, 1.2GHz and
1.8GHz:
| # grep . /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_frequencies
| /sys/devices/syst
Martin Michlmayr a écrit :
> * Aurelien Jarno <[EMAIL PROTECTED]> [2007-04-28 14:32]:
>> Please find attached a patch to add a malta flavour to the linux-2.6
>> package on mips and mipsel. As the names says, it support the Malta
>> board, which is a development board
stw %r20, 0(%sr2,%r20)
-# ifdef ENABLE_LWS_DEBUG
+# if ENABLE_LWS_DEBUG
stw %r0, 4(%sr2,%r20)
# endif
#endif
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :' : Debian developer | Electrical Engineer
`. `' [EMAIL P
Bastian Blank a écrit :
> On Tue, May 22, 2007 at 05:47:42PM +0200, Aurelien Jarno wrote:
>> Please find below the patch sent to the lkml. Note that even if it is
>> workarounded in the glibc, it is important to fix it, as in very rare
>> conditions, the kernel could end u
ry: Shared libraries
>
> This need for libgcc without direct linkage to it seems to be specific to
> arm. CCing the glibc maintainers for comment; you can find the code that does
> this under ports/sysdeps/unix/sysv/linux/arm/.
>
This code is actually present on all architectures.
Aurelien Jarno a écrit :
> Joey Hess a écrit :
>> Just spent half an hour since my slug wouldn't boot and I had to reflash
>> an old initramfs. This bug should be fixed ASAP before it breaks a lot
>> of systems.
>>
>> [EMAIL PROTECTED]:/tmp/initramfs>mkinit
ructure ustat in sys/ustat.h is associated with
the C function ustat() since glibc 2.0 and in HP-UX. You can't simply
remove it and standard.
linux-libc-dev should not directly export a kernel structure. Either
remove it or use #ifdef __KERNEL__, but don't bother us with that.
have this flavour.
Were I can grab the latest package sources? I will start a build and try
to fix the problem.
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :' : Debian developer | Electrical Engineer
`. `' [EMAIL PROTECTED] | [EMAIL
to have this flavour.
Are you building it natively or cross-compiling?
I am building on a native machine, and it has not failed at this point.
Still building though.
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :' : Debian developer | Elec
On Thu, Jul 12, 2007 at 07:10:19PM +0200, Aurelien Jarno wrote:
> Martin Michlmayr a écrit :
> > * Bastian Blank <[EMAIL PROTECTED]> [2007-07-11 14:33]:
> >> I intend to fork 2.6.22 today. The last 2.6.21 upload should go into
> >> lenny after all builds are a
Aurelien Jarno a écrit :
> On Thu, Jul 12, 2007 at 07:10:19PM +0200, Aurelien Jarno wrote:
>> Martin Michlmayr a écrit :
>>> * Bastian Blank <[EMAIL PROTECTED]> [2007-07-11 14:33]:
>>>> I intend to fork 2.6.22 today. The last 2.6.21 upload should go into
>&
Package: linux-2.6
Version: 2.6.21-5
Severity: critical
Justification: breaks the whole system
The configuration of the 4kc-malta flavour is broken on mipsel (half of
the file is missing). This makes the system unbootable.
A correct configuration file has been posted on the debian-kernel
mailing
Package: linux-2.6
Version: 2.6.22-3
Severity: wishlist
Tags: patch
Please find attached a patch to add a 64-bit Malta flavour to the
linux-2.6 package on mips and mipsel, based on the current 4kc flavour.
The name 5kc corresponds to the minimum MIPS64 CPU that the board can
run.
-- System Infor
s fixed, I could open a request for it to be included.
>
> Distribution is Debian etch freshly installed from yesterday.
Please note that this bug has been fixed upstream in 2.6.23-rc. Tested
successfully on an Ultrasparc 10.
--
.''`. Aurelien Jarno | GPG: 1024D/F1BC
on sparc64/sparc64-smp in the 2.6.23-rc test packages?
I tested it successfully on an Ultrasparc 10.
Thanks.
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :' : Debian developer | Electrical Engineer
`. `' [EMAIL PROTECTED] | [EM
mu.
>
> [0]
> http://www.wooyd.org/debian/kernels/linux-image-2.6.18-1-sparc32_2.6.18-4_sparc.deb
> [1] http://www.wooyd.org/debian/kernels/bus-id-size.patch
> [2] http://marc.theaimsgroup.com/?l=linux-sparc&m=116193388606449&w=2
>
It works well also here (QEMU).
I will test on hppa and mipsel later.
That proves that the bug is really a kernel bug and not a libc6 bug, I
am therefore reassigning the bug to linux-2.6 only.
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :' : Debian developer | Electrical Engineer
`. `' [EMAIL PROTECTED] | [EMAIL PROTECTED]
`-people.debian.org/~aurel32 | www.aurel32.net
retitle 387498 [hppa] system() hangs when compiled with -pg (gprof profiling)
thanks
On Thu, Nov 09, 2006 at 11:48:13AM +0100, Aurelien Jarno wrote:
> reassign 387498 linux-2.6
> retitle 387498 [hppa/mipsel] system() hangs when compiled with -pg (gprof
> profiling)
you sent concerning mips and mipsel, and it
works correctly on both paer and my machine.
Also the autobuilders have built gcl, maxima and axiom without any
problem. For acl2, there is a SIGILL on hppa, but I guess it is
different from this bug.
--
.''`. Aurelien Jarno |
for wireless cards, so I guess it is useful on
most architectures but sparc and s390. I know it has been used on i386,
amd64, powerpc and sparc.
> Once the changed rt2400/rt2500 packages are uploaded and the two missing
> information are answered, I'll include them immediately.
>
Daniel Baumann a écrit :
> Aurelien Jarno wrote:
>>> * the $module-source package should install a tar.bz2 as
>>> /usr/src/$module.tar.bz2. Currently, it is a tar.gz, so this needs
>>> to be changed.
>> I will change that.
>
> note that the nex
Package: libcap-bin,linux-2.6
Severity: grave
Justification: renders package unusable
The Debian kernels does not give the CAP_SETPCAP capability to the root
user, so the utilities in libcap-bin are not usable.
In my case this is a problem since the 2.6.18 kernel has added
/dev/net/tun to the CA
--
>
> Sujet:
> libcap-bin, linux-2.6: setting capabilities does not work with Debian
> kernels
> Expéditeur:
> Aurelien Jarno <[EMAIL PROTECTED]>
> Date:
> Sun, 04 Feb 2007 16:55:51 +0100
> Destinataire:
> Debian Bug Tracking System <[EMAI
NULL);
addrconf_sysctl_register(ndev, &ndev->cnf);
#endif
+
+ write_lock_bh(&addrconf_lock);
+ dev->ip6_ptr = ndev;
+ write_unlock_bh(&addrconf_lock);
+
+ /* Join all-node multicast group */
+ ipv6_addr_all_nodes(&maddr);
+ ipv
t;>
>> va_start(ap, fmt);
>> r=vuprintf(fdout, fmt, ap);
>> va_end(ap);
>> return r;
>> }
>>
>> int uputs(char *s, int fdout) {
>> int l;
>>
>> l=strlen(s);
>> if(l>0)
>> retur
).
As far as I know, 2.2 isn't even supported by glibc any more.
I've cc'd the glibc list for confirmation.
glibc in etch needs at least a 2.4.1 kernel, except for m68k, for which
the minimum version is 2.2.0.
--
.''`. Aurelien Jarno | GPG: 1024D/F1
Package: linux-image-2.6.16-2-nslu2
Version: 2.6.16-16
Severity: serious
CONFIG_USB_STORAGE_DEBUG is now enabled on nslu2 kernels. As this
kernels only run on machines which only supports USB disks, this render
the machine unusable: every traffic on the disk is logged to
/var/log/syslog, which gen
me (i.e. setting a value to
0 in /proc somewhere that disables the debugging)?
Well I have looked at the code, the debugging messages are printed using
printk(), and their inclusion or not in the final code is done by
preprocessor options (#ifdef #endif).
--
.''`. Aurelien
Bye,
Aurelien
[1] http://lkml.org/lkml/2006/7/15/54
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :' : Debian developer | Electrical Engineer
`. `' [EMAIL PROTECTED] | [EMAIL PROTECTED]
`-people.debian.org/~aurel32 | www.aurel32.net
On Tue, Aug 15, 2006 at 06:11:18PM +0200, Aurelien Jarno wrote:
> The second is in ioperm and concerns arm only. I will try to do a patch
> in the next few days.
>
Done, fixed in our SVN and patch send upstream.
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCD
Package: linux-image-2.6.17-2-amd64
Version: 2.6.17-6
Severity: minor
CONFIG_R8169_VLAN is enabled on all architectures that have the r8169
module, but amd64. Could you please fix that. Thanks.
-- System Information:
Debian Release: 3.1
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.17-2-amd64
Lo
reassign 387498 linux-2.6,libc6
On Mon, Oct 09, 2006 at 08:02:58AM +0200, Aurelien Jarno wrote:
> I am able to reproduce this bug, but on mipsel only. I am using a 2.6.17
> 64-bit kernel.
I have made some more tests, I am actually able to reproduce it on both
mips and mipsel, but only
the build daemon has the alternative broken
(or the gcc package), as the package linux-2.6 builds correctly on my
machine here.
Could somebody who has access to the build daemon check that the
alternative is not broken?
Bye,
Aurelien
--
.''`. Aurelien Jarno | GPG: 1024D/
Jurij Smakov a écrit :
On Sun, Oct 22, 2006 at 09:29:56PM +0200, Aurelien Jarno wrote:
I observed the same exact problem on the SparcStation 5 emulated by
QEMU. I haven't reported it because I first thought it was a bug in QEMU.
Can you please give some details on how you set up the qe
gt;
It has been followed by a few small fixes.
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :' : Debian developer | Electrical Engineer
`. `' [EMAIL PROTECTED] | [EMAIL PROTECTED]
`-people.debian.org/~aurel32 | www.aurel32.net
On Wed, Oct 10, 2007 at 06:54:05PM +0200, Daniel Baumann wrote:
> What is the status of this, should/can I include the drivers into
> linux-modules-extra-2.6 now?
I don't remember what was the problem, but I guess now they can be
included.
Aurelien
--
.'&#x
Bastian Blank a écrit :
> Hi folks
>
> 2.6.23 still does not build on hppa. One possible seems gcc 4.2, but
> someone needs to check it.
The problems also occurs with gcc-4.2. One solution is to build this
file with -O1.
--
.''`. Aurelien Jarno
Package: linux-2.6
Version: 2.6.18.dfsg.1-13etch4
Severity: important
Tags: patch
The attached patch add support for Pinnacle Dazzle DVC 100. It will be
merged in 2.6.25.
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (
Package: redhat-cluster-suite
Version: 2.20080107-1
Severity: serious
redhat-cluster-suite depends on clvm which does not exists anymore in
unstable.
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linu
t path.
> fs and network got centraly managed for 2.6.24 and you revert
> that without any good reason. please fix.
>
Ok, will do. Should I do the same for the other arm flavours?
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :' : Debian developer
on't know the module name, but config option is CONFIG_SMC91X)
>
They are actually needed until there is real support for versatile to
d-i. This way it is possible to use the initrd.gz from another platform
instead.
--
.''`. Aurelien Jarno | GPG: 1024D/F1BC
Bastian Blank a écrit :
> On Tue, Feb 26, 2008 at 12:07:01PM +0100, Aurelien Jarno wrote:
>> They are actually needed until there is real support for versatile to
>> d-i. This way it is possible to use the initrd.gz from another platform
>> instead.
>
> The kernel is b
psel, I am not sure this is actually possible, as those
platforms are not using initrd and thus won't be able to boot without
ext2 support.
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :' : Debian developer | Electrical Engineer
`. `' [EMAIL PROT
Robert Millan a écrit :
On Tue, Feb 26, 2008 at 02:10:09PM +0100, Bastian Blank wrote:
On Tue, Feb 26, 2008 at 01:46:47PM +0100, Aurelien Jarno wrote:
It does work, but there is currently no support for the versatile
platform in d-i. Therefore the solution is to use the initrd.gz from
another
n kernel-source | linux-kernel-source. Then in a second time it
would be possible to remove references to kernel-source.
I would like to have your comments on that.
Bye,
Aurelien
--
.''`. Aurelien Jarno GPG: 1024D/F1BCDB73
: :' : Debian GNU/Linux developer | Elect
reassign 469058 linux-2.6,gcc-4.3
thanks
On Wed, Mar 05, 2008 at 04:10:53PM +0100, Aurelien Jarno wrote:
> On Wed, Mar 05, 2008 at 03:48:05PM +0200, Nikodemus Siivola wrote:
> > On 3/5/08, Aurelien Jarno <[EMAIL PROTECTED]> wrote:
> > > Nikodemus Siivola a écrit :
> &g
ed, Mar 05, 2008 at 04:49:21PM +0100, Aurelien Jarno wrote:
> reassign 469058 linux-2.6,gcc-4.3
> thanks
>
> On Wed, Mar 05, 2008 at 04:10:53PM +0100, Aurelien Jarno wrote:
> That's definitively a kernel/gcc-4.3 problem, I have reported it
> upstream: http://lkml.org/lkml
tag 469058 + patch
thanks
On Wed, Mar 05, 2008 at 10:53:28PM +0100, Aurelien Jarno wrote:
>
> So let's summarize:
> - linux 2.6 has to be fixed. A patch is available on the lkml [1] for
> 2.6.25-rc. It could be easily backported to 2.6.24
The patch for 2.6.25-rc went upstre
found 469058 2.6.18.dfsg.1-10
thanks
Please find below a patch for 2.6.18, which should also apply to all
pre- x86/x86-64 merge 2.6 kernels.
Aurelien
commit d72de04eb1a0269fd37d1edefe03d6d0
Author: Aurelien Jarno <[EMAIL PROTECTED]>
Date: Wed Mar 5 18:59:11 2008 +0100
x86:
On Mon, Mar 24, 2008 at 11:43:08AM +0100, Bastian Blank wrote:
> On Mon, Mar 24, 2008 at 10:33:52AM +0100, Aurelien Jarno wrote:
> > Please find below a patch for 2.6.18, which should also apply to all
> > pre- x86/x86-64 merge 2.6 kernels.
>
> No, it does not.
>
Oops I
x27;s memory exhaustion, are linux and other large packages being
> blacklisted for these build hosts?
In the meantime, I have blacklisted linux on the Octeons swapping over
NFS. It should therefore build fine.
Aurelien
--
Aurelien Jarno GPG: 4096R/1DDD8C9B
aurel..
Package: src:linux
Version: 4.9.110-1
Severity: normal
Dear Maintainer,
The arm64 kernel allows one to run aarch32 processes on an aarch64
processor (if it has support for it), using the standard 32/64-bit
syscall compatibility. However this compat layer does not correctly
validate the arguments
control: affects -1 glibc
control: found linux/4.17.6-2
On 2018-07-23 21:31, Aurelien Jarno wrote:
> Package: src:linux
> Version: 4.9.110-1
> Severity: normal
>
> Dear Maintainer,
>
> The arm64 kernel allows one to run aarch32 processes on an aarch64
> processor (
Source: linux
Version: 5.10.197-1
Severity: grave
Tags: upstream patch
X-Debbugs-Cc: d...@debian.org, debian-m...@lists.debian.org
The loongson3 flavour of the mips64el kernel crash when running cmake:
| [ 4390.501529] do_cpu invoked from kernel context![#1]:
| [ 4390.506483] CPU: 3 PID: 24061 Co
Hi,
On 2023-10-30 09:46, Julien Cristau wrote:
> Hi,
>
> On Mon, Oct 9, 2023 at 09:08:31 +0100, Jiaxun Yang wrote:
>
> >
> >
> > 在2023年10月8日十月 上午11:11，Aurelien Jarno写道：
> > > On 2023-07-19 16:28, Jiaxun Yang wrote:
> > >>
't
> suggest dropping amd64 if gcc would ICE on one kernel driver on that
> architecture.
Or maybe just blame the kernel instead:
https://lore.kernel.org/lkml/CAHk-=whkGHOmpM_1kNgzX1UDAs10+UuALcpeEWN29EE0m-my=w...@mail.gmail.com/
--
Aurelien Jarno GPG: 4096R/1DDD8C9B
aurel...@aurel32.net http://aurel32.net
On 2024-01-11 18:38, Aurelien Jarno wrote:
> On 2024-01-11 13:24, Adrian Bunk wrote:
> > On Thu, Jan 11, 2024 at 11:28:19AM +0100, Bastian Blank wrote:
> > >...
> > > On Thu, Jan 11, 2024 at 09:48:34AM +, Dimitri John Ledkov wrote:
> > > > Disabling de
Package: iproute2
Version: 6.7.0-2
Severity: serious
Tags: ftbfs
Justification: fails to build from source (but built successfully in the past)
User: debian-gl...@lists.debian.org
Usertags: libtirpc-dev
Dear maintainer,
Starting with glibc 2.31, support for NIS (libnsl library) has been
moved to
t way to fix this, is to clean up in Windows ...) Have tried
> to transfer
> the data to new hard drive, to exclude any issues with the hard drive itself,
> but no difference.
>
>
>* What outcome did you expect instead?
>
> A 'read/write' status. This is
1 - 100 of 204 matches
Mail list logo
