Jason Gunthorpe [EMAIL PROTECTED] writes:
I hope egcs fixes alot of problems like this :
I believe it does, and again, you can solve all these problems with
the existing gcc and the repo patch. One thing I didn't mention
before was that you do need to compile your code with -frepo.
--
Rob
does anyone know what's happened to www.linuxhq.com? up until a few weeks
ago it was THE web page to go to for everything you needed/wanted to know
about kernel patches
...then it stopped being updated about 2 weeks ago, and now seems to have
vanished off the face of the earth (DNS
On Sep 4, Aria Prima Novianto wrote
Every time I connect using pppd, I got this message in my console
after get connected:
pppd[257]: remote IP address 128.10.16.110
modprobe: can't locate module char-major-10
I can't find char-major-10 module in my kernel source. Is it safe to put
Hi,
Every time I connect using pppd, I got this message in my console
after get connected:
pppd[257]: remote IP address 128.10.16.110
modprobe: can't locate module char-major-10
I can't find char-major-10 module in my kernel source. Is it safe to
put 'alias char-major-10 off' in
On Thu, Sep 04, 1997 at 02:32:27PM +, Martin Bees wrote:
Hi Martin,
I would be very grateful if anyone could help me with a
small problem concerning the boot disk of Debian/Linux
(+all other Linux versions).
Simply, version 2.0.29 boot disks crash on my Laptop
shortly after it probes
I'm trying to compile a program and it's asking for libX11.a
What package contains this ??
$ dpkg -S libX11.a
xslib: /usr/X11R6/lib/libX11.a
(You can view the Contents file on the ftp site to search for
packages not on your system).
--
joost witteveen, [EMAIL PROTECTED]
#!/usr/bin/perl
I would be very grateful if anyone could help me with a
small problem concerning the boot disk of Debian/Linux
(+all other Linux versions).
Simply, version 2.0.29 boot disks crash on my Laptop
shortly after it probes for the PCI devices.
It says unrecognized PCI device and then crashes,
saying
On 4 Sep 1997, Paul Seelig wrote:
[EMAIL PROTECTED] (Arthur Jerijian) writes:
I tried to install the XConfigurator and newt RPM packages from Red Hat
onto Debian, using the alien program. I was able to start XConfigurator,
but it was apparently looking for some Red Hat administrative
Date: Thu, 4 Sep 1997 12:05:00 -0400
From: Swanson, Glenn, KB1GW [EMAIL PROTECTED]
Subject: Newbe question...
Greetings,
I'm trying to install Debian (latest release) from floppies onto a '386
system that has only 4 Meg of RAM. (I'm going to try using lmemroot.bin on
floppy2.)
1) Is this
Aldrin Leal wrote:
-BEGIN PGP SIGNED MESSAGE-
Hello!
I was building a proxy system yesterday, and i had a strange trouble.
I've installed Linux, set up everything. A Dream of a Intranet. I can
ping back and forth between the ether.
Set up pppd. But, when
On 4 Sep 1997, Carey Evans wrote:
Olaf Weber [EMAIL PROTECTED] writes:
RFC822 would be the appropriate one here, and it does impose some
restrictions regarding what can and cannot be a date header:
[snip]
So it certainly looks like Orn needs to fix his mailer.
I agree. I think it's
Olaf Weber [EMAIL PROTECTED] writes:
RFC822 would be the appropriate one here, and it does impose some
restrictions regarding what can and cannot be a date header:
[snip]
So it certainly looks like Orn needs to fix his mailer.
RFC2047 is also applicable - it's responsible to the mangled
BusLogic supports free software and is well supported under Linux?
Very well. Probably I'll have one customer of mine buy new machines very
soon, they will buy what I say. (Maybe me too - going to buy a new
harddisk - will replace my Adaptec 2940 with a BusLogic instead of a
2940UW or 3940W
Alex Yukhimets [EMAIL PROTECTED] writes:
I have some strange problem with my C++ code: I get a segmentation fault
in destructor's delete[] operator. GDB says it happend in free().
What could be the cause of that? The only place I touch the pointer
I pass to delete[] is in the constructor
Hi,
sorry for this mail but I don't seem to be receiving any mails
from the debian-user list anymore :-(. Just testing.
Nico.
--
--
Nico De Ranter
Sony Objective Composer (SOCOM)
Sint Stevens Woluwestraat 55 (Rue de Woluwe-Saint-Etienne)
1130 Brussel (Bruxelles), Belgium, Europe, Earth
I am considering buying a new computer and would like to get a
Pentium II with the new 440LX chipset. My concern is over the AGP
graphics. Would I be able to use debian with AGP? Are there any
compatibility issues with 440LX?
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word
I regard myself still as a newby as far as linux is concerned. I have
been using smail for about a year now.
After receiving a cd with Debian 1.3.1 on it, I decided to try out the
exim as well. I have read somewhere that it is faster and easier to
configure than the others. Not for me. I
On Sep 3, Britton wrote
I have one of these CD's also, with lots of problems with X. I am having
trouble upgrading via the ftp method. I choose pretty much the standard
options, and it hangs like this:
Using FTP to check directories...(stop with ^C)
Connecting to ftp.debian.org...
Jeff Gunter:
FWIW, I have also had problems with SGI's C++ compiler and g++ (on the same
SGI) being incompatible. The incompatibilities are even to the level where
code will compile cleanly under one compiler and not compile at all under the
other. These two compilers are definitely not
[EMAIL PROTECTED] (Arthur Jerijian) writes:
I tried to install the XConfigurator and newt RPM packages from Red Hat
onto Debian, using the alien program. I was able to start XConfigurator,
but it was apparently looking for some Red Hat administrative files. Is
there a version of
Hi,
I tried to install the XConfigurator and newt RPM packages from Red Hat
onto Debian, using the alien program. I was able to start XConfigurator,
but it was apparently looking for some Red Hat administrative files. Is
there a version of XConfigurator for Debian? The default XF86Setup
On 02-Sep-97 Craig Sanders wrote:
anyway, that's all beside the point. what i'm really writing to say is:
if you'd like to maintain the package for debian, i'll send you what
i've done so far.
Sure, I will take it. I will send you an address where you can put it by anon
ftp via private email.
On 31 Aug 1997, John Goerzen wrote:
How does this differ from gcl (GNU Common Lisp)?
I haven't used GCL much. Clisp is GPL'd, so it's just as distributable
as GCL. I'm using clisp because it appeared o be a little further along
in the development stage. Clisp is also (now) available as a
On Tue, 2 Sep 1997, Jaldhar H. Vyas wrote:
On Tue, 2 Sep 1997, Will Lowe wrote:
I'd reccomend the Makeing a debian Package page, which is pretty good
As the author of that article, I am gratified that someone actually finds
it useful.
Very!
It's too easy. This is by design. My
Tomorrow we're moving our company server machine to a new ISP.
Right now it has a UTP SMC 8216 Ultra in it, but the new
ISP only has coax (:-(), and we're not too sure what to do
about an ethernet card. We would like to spend a little
bit more than just a PCI NE2000 and get something we know
is
-BEGIN PGP SIGNED MESSAGE-
On Thu, 4 Sep 1997, Jens B. Jorgensen wrote:
You must be passing the defaultroute option to pppd. This option may
be specified on the pppd command line or in the /etc/ppp/options
file. Remove this option.
I tried with/without defaultroute. tried the
Jason Gunthorpe writes:
On 8859 xxx 2001, Orn E. Hansen wrote:
On 02-Sep-97 Jason Gunthorpe wrote:
Orn, your mailer is formatting dates in a way that pine doesn't understand
HDate: =?iso-8859-1?Q?Mi=F0,?= 03 Sep 1997 19:14:09 +0200 (CET DST)
I noticed that, why is your mailer putting such
Then during next booting, kernel complained about missing files and later
fsck started to fix the filesystem again. After that every command I typed,
printed file system error messages. And the worst thing was that e2fsck
couldn't even recognise the file system.
Warning, the following
I have 3.1 installed from floppys. There were some problems with some
of the packages I tried to install. Most of these were caused by modem
errors I think. It was certainly a mistake to try to install so many
packages simultaniously. Anyway I decided to order the 3.1.1 cd and
work from
Greetings,
I'm trying to install Debian (latest release) from floppies onto a '386
system that has only 4 Meg of RAM. (I'm going to try using lmemroot.bin on
floppy2.)
1) Is this too little RAM for such a system?
2) Will I have a usable system if I can pull this off?
Apologies to the
---BeginMessage---
By the way, there is something wrong with your mailer as replying to you doesn't
work.
Luis.
--
Luis Francisco Gonzalez [EMAIL PROTECTED]
PGP Fingerprint = F8 B1 13 DE 22 22 94 A1 14 BE 95 8E 49 39 78 76
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe
Does anyone know where I can go to get some help on Front Page for Unix??
Yep.
Don't seem to know what I am doing here
Welcome to hell. It gets worse from here. On the plus side the new
version of Frontpage (FP98) is by all accounts much better.
I am looking for any kind of help or list
On Wed, Sep 03, 1997 at 05:07:11PM +0200, E.L. Meijer (Eric) wrote:
I have some strange problem with my C++ code: I get a segmentation fault
in destructor's delete[] operator. GDB says it happend in free().
What could be the cause of that? The only place I touch the pointer
I pass to
Alan Eugene Davis wrote:
I have installed both the ucbmpeg player and mtv player, and set up
netscape for each. I have consistently not been able to view mpegs.
Each time an mpeg file comes over the line, this message is displayed
in a dialog box, from Netscape as well as from Mosaic:
On Wed, 3 Sep 1997, George Bonser wrote:
I STRONGLY disagree. I want to know when you wrote it ... not when it
arrived here. If a mail was delayed a day or two in route, it might
completely change how I look at the information in the email. Example, a
put-down of Princess Diana might be
-BEGIN PGP SIGNED MESSAGE-
Hello!
I was building a proxy system yesterday, and i had a strange trouble.
I've installed Linux, set up everything. A Dream of a Intranet. I can
ping back and forth between the ether.
Set up pppd. But, when firing up, it messes up my routes.
I have my fvwm desktop set up to be nine times the size of the actual
monitor. I've got a little pager in the bottom of my screen that lets me
see all the desktops.
I'm a keyboard person, as opposed to a mouse person. I'd like
ALT-TAB to change focus *only* on the current desktop.
Does anyone know where I can go to get some help on Front Page for Unix??
Don't seem to know what I am doing here
I am looking for any kind of help or list server or newsgroup.
Tony
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] . Trouble?
Hi,
this happened to me for the second time, and I don't want to reinstall the
whole system again in the future:
Everythig worked fine, I was quite happy not to use win95.
Then I decided to update some packages. I downloaded some newer packages,
run dselect, and selected only xbase (X was not
I have installed both the ucbmpeg player and mtv player, and set up
netscape for each. I have consistently not been able to view mpegs.
Each time an mpeg file comes over the line, this message is displayed
in a dialog box, from Netscape as well as from Mosaic:
Using private color-map
Bad
On Wed, 3 Sep 1997 17:15:20 -0500, Tony Koehn wrote:
Merit Radius 2.4.23C
Hmm then I can't help much since I never used that one.
What are you're logs showning? Anything?
-
http://www.psychosis.com/emc/ Elite
I'm trying to compile a program and it's asking for libX11.a
What package contains this ??
Thanks,
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] . Trouble?
e-mail to [EMAIL PROTECTED] .
Rick Hawkins wrote:
The solution for this is xfs, which is supposedly running. However, looking
at top from a regular console, it is X taking all the cycles, while xfs is
idle.
Xfs is running, but have you configured your xserver to use it? I did it by
modifying my XF86Config, commenting
Alex Yukhimets [EMAIL PROTECTED] writes:
I have some strange problem with my C++ code: I get a segmentation fault
in destructor's delete[] operator. GDB says it happend in free().
What could be the cause of that? The only place I touch the pointer
I pass to delete[] is in the
Xfs is running, but have you configured your xserver to use it? I did it by
modifying my XF86Config, commenting out my old FontPath, and adding:
# Use font server.
FontPath tcp/localhost:7100
This seems to do it. Shouldn't the configuration program have done this when
it asked
Aldrin Leal wrote:
-BEGIN PGP SIGNED MESSAGE-
On Thu, 4 Sep 1997, Jens B. Jorgensen wrote:
You must be passing the defaultroute option to pppd. This option may
be specified on the pppd command line or in the /etc/ppp/options
file. Remove this option.
I tried
On 03-Sep-97 George Bonser wrote:
I STRONGLY disagree. I want to know when you wrote it ... not when it
arrived here. If a mail was delayed a day or two in route, it might
completely change how I look at the information in the email. Example, a
put-down of Princess Diana might be viewed in
Nicola Bernardelli [EMAIL PROTECTED] wrote:
There was mention of a specific model, Buslogic BT-948: is it such a
low-end card or one with that CPU onboard?
The BT-948 and all other MultiMaster models have onboard CPUs. The 948
is BusLogic's equivalent to the Adaptec 2940U. The 958
I've had extremely good luck with the Kingston Tulip based cards.
They're fairly cheap ($50 or so for 10mb, $90 or so for 100mb),
and i've found them to be very fast, reliable, and well-supported
by Linux.
The 10mb card is a combo card (aui, utp, coax all on one card).
Simon Karpen
[EMAIL
Hi there!!
I'm doing some network consulting for a computer store, and we'd like to
connect the store LAN to the Internet through a 56k or T1 connection. If
possible, we'd like to save the expense of the router and perhaps the
CSU/DSU if possible.
I think I've seen some adds in network
On 03-Sep-97 Olaf Weber wrote:
RFC822 would be the appropriate one here, and it does impose some
restrictions regarding what can and cannot be a date header:
5. DATE AND TIME SPECIFICATION
5.1. SYNTAX
date-time = [ day , ] date time; dd mm yy
On 03-Sep-97 Clare Johnstone wrote:
If not sorted at all, listed as they arrive, the threads are in good
order. For example the date on
Orn's mail as received just now is:
Date: =?iso-8859-1?Q?Mi=F0,?= 03 Sep 1997 23:00:14 +0200 (CET DST)
Which is:
Date: Mið, 03 Sep 1997 23:00:14 +0200 (CET
Pete Templin wrote:
Hi there!!
I'm doing some network consulting for a computer store, and we'd like to
connect the store LAN to the Internet through a 56k or T1 connection. If
possible, we'd like to save the expense of the router and perhaps the
CSU/DSU if possible.
Very possible.
On the recommendation of a colleague, I fixed the netscape-plugin
problem by directly editing the netscape executable using emacs [just
search for the error message]. This eliminates the need to use bash
2.01 which I could not install consistently (did fix the plugin
problem but created new
Hi !
I think my ppp conection is a little too slow ... I have a 33.6 modem
(but only a 8250 uart) and when I access a webpage from Linux, it
loads most of the pictures at about 500 bytes/sec. Thats SLOW ! If it
is a little bigger files, it can get to about 1.9-2 kb/sec, which is
what the
Hi !
Just wondering if it is possible to put some colors on the directory
listings ... like there is in Slackware ? It sure makes it easyer to
see which of the object that are directories, and which are files...
Regards,
badpixel of bad sector
michael legart
--
[EMAIL
Howdy all!
Just wanted to get some information from those of you out there that might
have some...
I recently purchased a house, and I would like to get some sort of internet
hookup that my friends and I could use. There are 5 computers, each either
running Linux or Win95 all connected to a
See /usr/doc/fileutils/color-ls.gz which describes how to get colors in
the directory listings. The quick answer is:
ls --color
or
alias ls='ls --color=auto'
in sh type shells.
I hope this helps.
// Heikki
--
Heikki Vatiainen * [EMAIL PROTECTED]
Tampere University of
Hi!
I think my ppp conection is a little too slow ... I have a 33.6 modem
(but only a 8250 uart) and when I access a webpage from Linux, it
.
Does someone know how to boost the speed a little ? Have I made som
settings wrong ?
No way. Not with that UART. To operate your
THANK YOU SO MUCH for all infos, I won't miss the doc and WEB site
you suggested (I also think they will deal with possible/real transfer
rates, of course related to the kind of hard disk or other device you
connect to the card).
Cheers.
Nicola Bernardelli [EMAIL PROTECTED]
Hi,
I do not know what the debate seems to be about, but I must
take exception to this statement.
Orn == Orn E Hansen [EMAIL PROTECTED] writes:
Orn The RFC are just guidelines... and not rules.
The RFC are all the rules that actually apply to the
internet. And if we
On Thu, 4 Sep 1997 14:13:30 -0400 (EDT), Pete Templin wrote:
Hi there!!
I'm doing some network consulting for a computer store, and we'd like to
connect the store LAN to the Internet through a 56k or T1 connection. If
possible, we'd like to save the expense of the router and perhaps the
On 04-Sep-97 Manoj Srivastava wrote:
The RFC are all the rules that actually apply to the
internet. And if we all start ignoring the rules, the cooperative
process that is the internet (and, indeed, Linux itself is the
product of a similar cooperative process).
If you must
63 matches
Mail list logo
