I installed gs 5 a while ago, but I havn't been able to make it work with
my Epson Stylus Color 600. When I install the package, it says that it
can't be configured (for reason which I forget at the moment). It seems
to try to work though, but I can't figure out how to make the new unified
Hi,
When I try insmod paride, which was compiled my me running kernel 2.0.32
and /usr/src/linux is link against 2.0.32 kernel, I get this error:
/lib/modules/2.0.32/misc/paride.o: kernel-module version mismatch
/lib/modules/2.0.32/misc/paride.o was compiled for kernel version 2.0.29
Hi!
I've got a Canon BJ-200ex printer. Can I use it under LINUX?
I have used ghostscript 5.03 and magicfilter, but it doesn't working!
ghostscript_5.03-3_i386.deb (I've done it with alien)
magicfilter_1.2-10.deb
This is my /etc/printcap file: (magicfilterconfig)
lp|bj|bj200|Canon BJ-200ex:\
I've just added a SONY SDT-5000 DDS-2 tape drive to my system, and am
getting a lot of scsi bus resets whenever two or more scsi devices are
accessed simultaneously.
At first i thought it was just the tape drive, but i tested various
combinations of hardware and can reproduce the error by using
Hi,
I take it these are third party kernel modules you are trying
to compile and run. Welcome to the bleeding edge.
Firstly, this is likely to be tricky. Secondly, you need to
compile the module using the 2.0.32 kernel header files
(judicious use of -I/usr/src/linux/include/ in
Hi...
I have Debian/hamm box at home, and I have a problem:
When I try to print, I do:
lpr file
it hangs and strace lpr file stops at
connect(4, {sin_family=AF_INET, sin_port=htons(515),
sin_addr=inet_addr(195.113.48.42)}, 16 unfinished ...
(195.113.48.42 is invalid adress used during
I just re-installed Debian 1.3.1 and I installed the kernel module for a
3c503 EtherLink II/16 bit ethernet card. It detected it fine. When I
booted off the floppy, it says:
3c503
That's it. It says this when loading the modules. If it helps, I'm
using Debian 1.3.1 on a 486SX/25 with 8MB
I don't know about you, but when I tried to install GS 5 (the libc 5
package anyway) I got an error saying the package couldn't be configured
(though GS 4 was configured, as far as I know). Did you get this? Could
it be responsible for your problem?
On Fri, 19 Dec 1997, Toth Laszlo wrote:
-BEGIN PGP SIGNED MESSAGE-
Regarding bootable Debian 1.3.1 CD of 03:26 AM -0800 1997-12-17,
Christian Hagemeier wrote:
My motherboard supports the feature to boot from a CD-ROM. I read that I
can install Debian this way. But how do i create such a CD? Or is the
Official CD such a bootable
Hi,
I've just install the debian 1.3.1.r6 on a new harddrive and
the sendmail gave me some error: (PLEASE HELP)
--8
# dpkg -i /pub/debian/bo/binary-i386/mail/sendmail_8.8.5-1.deb
Selecting previously deselected package
I wanted to use dselect because it could show me dependencies and
suggestions, before it tried to install them. I grabbed a few packages
and it turned out they had some dependencies I did not expect. So I had
a half installed package left behind. Thought dselect might have helped
here.
I´m just installing debian linux to my Compaq Armada 7300 series laptop.
I suppose there will be some slight problems with network cards (I´m using
compaq netplex 10/100 integrated on the docking station and PCMCIA 3C589D.)
and possibly with display adapter.
I´m interested to hear if someone
I'm wondering is it possible to start X-Windows in multiple virtual consoles
and if so how. Thanks.
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
HI (Me again)
I am still having major problems with dpkg and deb files, as suggested i
have re downloaded the deb files several times, both with cute ftp (in
binary mode) and msie, yet when ever i try to install them with dpkg i
always get the same error messages. unexpected eof, something about
Martin Schulze [EMAIL PROTECTED] wrote:
: Hi!
: I've installed xcdroast from hamm and I'm trying to copy an audio cd.
: Xcdroast is still using cdwrite - which isn't installed anymore. Even
: worse cdwrite won't work with my cdwriter, only cdrecord does it.
: What Do I need to do to let
Hi,
I was wondering if someone can give me any pointers as to how to set up a
Debian host to act as a server for an NCD X-Terminal that boots through TFTP.
Thanks,
Luis
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL
Mario Filipe writes:
Hi
I have a question to pose and I hope I will tell you everything you need
to help me. I'm running Debian 1.3 (2.0.29). I was running x, pine (and a
xterm associated with it), a xterm and netscape 4.04 and an rc5 client,
plus apache, postgresql and all the other
Hi!
I tried out , what you said.
#dpkg -i ghostscript_5.03-3_i386.deb
Selecting previously deselected package ghostscript.
(Reading database ... 16188 files and directories currently installed.)
Unpacking ghostscript (from ghostscript_5.03-3_i386.deb) ...
Setting up ghostscript (5.03-3) ...
#
I'm having a problem getting xcdroast to start -- I get this message:
Error: Some or all Generic-SCSI-Devices are missing.
Please create first the devices. Run ./MAKEDEV.sg
in the xcdroast-0.95c directory.
Trouble is, there _is_ no xcdroast-0.95c directory. The MAKEDEV.sg script is
not
Hi!
I tried out my old Epson FX-1000, with epson9 filter, and It works.
I used this gs:
gs-aladdin_5.03-0.99_i386.deb
and magicfilter:
magicfilter_1.2-10.deb
The Canon BJ-200ex, doesn't work with bj200 filter. I think, this printer
can't work under Linux.Is this right?
Corleone
Ui: Does HP L5
On Fri, Dec 19, 1997 at 02:36:19PM +0100, Toth Laszlo wrote:
Ui: Does HP L5 printer work under Linux?
Do you mean 5L? Works great.
Hamish
--
Hamish Moffatt, [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED]
Latest Debian packages at ftp://ftp.rising.com.au/pub/hamish. PGP#EFA6B9D5
CCs
Hi!
Yes 5L. :))
What do you use for it?
Corleone
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
I am trying to unpack the newest kernel source in /usr/src. It goes
along fine until it stops and says:
tar: Skipping to next header file
gzip: linux-2.0.33.tgz: invalid compressed data---crc error
tar: Archive - EOF not on block boundary
I used the following commands to try to uncompress the
Try using tar -zxvf linux-2.0.33.tgz. If you get that error again, it means
that the file is corrupted and you will have to download the source again.
All the kernel sources I download come with a tar.gz extension... I get them
usually from kernel.org or sunsite. Did someone else package that
While testing the upgrading of rex to hamm I have discovered
several problems or possible bugs. I will post each of these as
separate messages, and ask if anyone else has encountered them, and if
they should be reported as bugs.
While updating perl 5.003.07-10 using
After installing libsocks4_4.3.beta2-3 and socks-clients_4.3.beta2-3,
setting up /etc/socks.conf, and setting the SOCKS_NS and SOCKS_SERVER
environment variables I can rftp through the SOCKS firewall to the
internet.
dftp and dselect do not connect to servers on the internet though.
After
Hi,
I was wondering about the way one can manually change the domain name of
a debian system. On other systems, I was used to have an /etc/domain
file, or something similar, but not with debian.
I do change the fqdn of my host in the files /etc/hosts and the local
domain name in /etc/resolv.conf.
Hi!
Would anything brake if I changed the ID of group 'disk' to 8
and the ID of group 'mail' to 6. Of course, I would make sure
all the files get their ID's changed as well.
I already posted this question once, but got no answer. Should
I be asking questions like this on a different
Hi!
I'm trying to compile the hamm version of autofs on my
bo system (since there does'nt seem to be a debian package for
bo). This is what I get:
...
gcc -shared -O3 -fomit-frame-pointer -Wall -I../include -fpic
-DAUTOFS_LIB_DIR=\/usr/lib/autofs\ -o lookup_yp.so lookup_yp.c
What you suggested did not work, so I downloaded the source again (from
kernel.org). Now it says:
tar: Skipping to next header file
It doesn't say anything else like last time. It just ends and goes back to the
prompt.
Any ideas?
dpk wrote:
Try using tar -zxvf linux-2.0.33.tgz. If you get
Hi,
I think you should download the sources from a different site
perhaps? I've had good results from ftp.kernel.org.
manoj
--
Don't tell me how hard you work. Tell me how much you get
done. James J. Ling
Manoj Srivastava [EMAIL PROTECTED]
Hi,
Which ftp site have you been using? Are *all* the deb files
apparently corrupted?
manoj
--
EXCLUSIVE: Imported product.
Manoj Srivastava [EMAIL PROTECTED] http://www.datasync.com/%7Esrivasta/
Key C7261095 fingerprint = CB D9 F4 12 68 07 E4 05 CC 2D 27 12 1D F5 E8 6E
I have downloaded linux-2.0.33.tar.gz from kernel.org twice and neither one has
worked.
Manoj Srivastava wrote:
Hi,
I think you should download the sources from a different site
perhaps? I've had good results from ftp.kernel.org.
manoj
--
Don't tell me how hard you
At 08:19 -0600 on 12/19/97, Aaron Walker wrote:
I am trying to unpack the newest kernel source in /usr/src. It goes
along fine until it stops and says:
tar: Skipping to next header file
gzip: linux-2.0.33.tgz: invalid compressed data---crc error
tar: Archive - EOF not on block boundary
On Fri, 19 Dec 1997 00:54:47 CST, wrote:
Hi,
I've just install the debian 1.3.1.r6 on a new harddrive and
the sendmail gave me some error: (PLEASE HELP)
--8
# dpkg -i
On Fri, 19 Dec 1997 00:54:47 CST, wrote:
Hi,
I've just install the debian 1.3.1.r6 on a new harddrive and
the sendmail gave me some error: (PLEASE HELP)
--8
# dpkg -i
On Fri, 19 Dec 1997, Aaron Walker wrote:
Manoj Srivastava wrote:
Hi,
I think you should download the sources from a different site
perhaps? I've had good results from ftp.kernel.org.
I have downloaded linux-2.0.33.tar.gz from kernel.org twice and neither
one has worked.
On Fri, 19 Dec 1997 08:24:50 +0300, cs51wcs wrote:
I'm wondering is it possible to start X-Windows in multiple virtual consoles
and if so how. Thanks.
Hi Scott,
This worked for me (I tried other ways and this was the only way):
Ctrl-Alt-F2 (from within X, to get to VC2) ..then login..
Christian Hagemeier hat gesagt: // Christian Hagemeier wrote:
Hi!
My motherboard supports the feature to boot from a CD-ROM. I read that I
can install Debian this way. But how do i create such a CD? Or is the
Official CD such a bootable CD?
Chris
Debian-CDs are bootable, at least
I have a machine running (sorta) that with kernel 2.0.29 runs fine for
a long time, but with .30 or .32, it panics after a few hours with
errors on the screen something about SKPUT (I dnd't get a chance to write them
down.). Nothing gets written to the logs. Does anyone have a pointer?
Tim
--
-Original Message-
From: Aaron Walker [EMAIL PROTECTED]
To: Debian User List debian-user@lists.debian.org
Date: Friday, December 19, 1997 9:44 AM
Subject: tar: Skipping to next header file
I am trying to unpack the newest kernel source in /usr/src. It goes
along fine until it stops and
-Original Message-
From: Rick [EMAIL PROTECTED]
To: debian-user@lists.debian.org debian-user@lists.debian.org
Date: Friday, December 19, 1997 6:01 AM
Subject: dpkg and deb files
HI (Me again)
I am still having major problems with dpkg and deb files, as suggested i
have re downloaded the
-Original Message-
From: Aaron Walker [EMAIL PROTECTED]
To: Debian User List debian-user@lists.debian.org
Date: Friday, December 19, 1997 9:44 AM
Subject: tar: Skipping to next header file
I am trying to unpack the newest kernel source in /usr/src. It goes
along fine until it stops and
On Fri, 19 Dec 1997 10:38:50 GMT, Rick wrote:
HI (Me again)
I am still having major problems with dpkg and deb files, as suggested i
have re downloaded the deb files several times, both with cute ftp (in
binary mode) and msie, yet when ever i try to install them with dpkg i
I have a couple of unrelated questions. First, I subscribe to the
digest version of this list (debian-user-digest) and it seems to be
broken (at least I haven't gotten anything from it in about a week). I
sent email to debian-user-request about the problem yesterday and
haven't heard anything
On Wed, Dec 17, 1997 at 01:12:08PM +0100, Gertjan Klein wrote:
[snip]
DOS (and W95) require to be booted from drive C: (ignoring floppies
again). During booting, at some stage before processing config.sys, it
switches from loading files from the actual boot drive to loading them
from
On Thu, 18 Dec 1997, ADRIAN CLAYTON wrote:
Having installed from diskimage floppies, I accidentally deleted some
stuff (in the /dpkg directory) and decided to start over again. Since I
reinstalled, LILO sticks every time I boot from harddisk. I then also
imported LOADLIN~.DEB and configured
Craig,
Here are 2 driver messages from your report and what they let me think:
Dec 19 12:24:24 siva kernel: ncr53c810-0:0: ERROR (a0:0) (47-67-80) (8/33) @
script (628:0f00).
Dec 19 12:24:24 siva kernel: ncr53c810-0: script cmd = 6040
DSTAT= 0xa0 - bit 0x20 means PCI BUS
On 19-Dec-97 David Stern wrote:
On Fri, 19 Dec 1997 08:24:50 +0300, cs51wcs wrote:
I'm wondering is it possible to start X-Windows in multiple virtual consoles
and if so how. Thanks.
Hi Scott,
This worked for me (I tried other ways and this was the only way):
Ctrl-Alt-F2 (from within X, to
Hi,
I just installed the new version of Xlock on my computer ... And now when
I type
xlock -mode flag it thinks for a second (or two it's only a lowly 486)
and then spits out the message
Unable to determine hostbyname
What does this mean ... how do I fix it
TIA
-Kevin, kc5vxy
[EMAIL
Are you really, really sure you did not forget the space after those two
slashes. I use the command almost every day and it works just fine. However,
if if type
startx --:1
^^^-- note, no space after the second slash
I get the same error as you about X already being active for display
On 19-Dec-97 Butch Kemper wrote:
At 08:19 -0600 on 12/19/97, Aaron Walker wrote:
I am trying to unpack the newest kernel source in /usr/src. It goes
along fine until it stops and says:
snip
The message from gzip makes me think the file was not downloaded as a
binary file but as a text file.
On 19-Dec-97 Heikki Vatiainen wrote:
Are you really, really sure you did not forget the space after those two
slashes. I use the command almost every day and it works just fine. However,
if if type
Yep, I'm absolutely certain - I entered:
startx -- :1
the only spaces were between x and --
Hi,
I have a linux server and NT4.0 workstation clients. I use IP forwarding
for the NT clients. Realaudio, regular ftp and http connection works fine.
vxtreme does not work: It make the connection but fails to transfer the data
I get the message that I should call the system administrator to set
Hi,
Thanks to a suggestion i have managed to sucessfully install some deb files
from a mounted vfat\msdos partition! Hurrah!
There were still some err messages when installing man-db, but they we only
about not finding some language files, everything works fine!
the command i used to mount the
I did a quick search in the bugs and couldn't find anything about this
problem. If I try to generate a ChangeLog file via C-x v a works fine
on the initial run. After a changelog exists, I get this at the top of
the changelog buffer;
rlog: unknown date/time: 19/12/1997 23:41:45
rlog aborted
I
AHHH
I very very carefully followed the instructions in the
lic5-lic6-Mini-HOWTO.txt and upgraded to libc6 today Great I
thought that the Packagename and the packagenameg files could coexist
... apearntly not ... the xlib6g replaced my xlib6 package rendering my x
instalation
On Fri, Dec 19, 1997 at 02:43:34PM +0100, Toth Laszlo wrote:
Yes 5L. :))
What do you use for it?
Not that much. Printing from Windows apps via samba (Office97 as
well as SmartSuite 97), and also printing from Linux apps
with magicfilter/ghostscript doing conversion, eg from Navigator 3.
Ralph Winslow [EMAIL PROTECTED] wrote:
Yep, I'm absolutely certain - I entered:
startx -- :1
the only spaces were between x and -- and between -- and :1
three tokens, and I just re-tried to be absolutely certain. Oops,
this time I ran as root and voila, it worked! So I tried it
On Fri, 19 Dec 1997, Gerard Roudier wrote:
Here are 2 driver messages from your report and what they let me think:
Dec 19 12:24:24 siva kernel: ncr53c810-0:0: ERROR (a0:0) (47-67-80) (8/33)
@ script (628:0f00).
Dec 19 12:24:24 siva kernel: ncr53c810-0: script cmd = 6040
60 matches
Mail list logo
