On Wed, Apr 21, 1999 at 08:32:12PM +0200, Ignacio J. Alonso wrote:
Si descomento la linea default=Win98 el resultado es el mismo pero el
asterisco aparece en
Win98. Pues bien, en cualquiera de los dos casos soy incapaz de que
funcione, es decir siempre arranca W98 haga lo que haga. ¿Puede
Hola:
No recuerdo quien preguntó sobre la tarjeta mencionada, pero aquí
también tenía problemas con ella y por fin, aunque supongo no es la
mejor manera de hacerlo, así lo hize:
El problema
---
Estuve sufriendo un buen rato con la configuración del X en la máquina
nueva que uso en el
Mario Camou Riveroll [EMAIL PROTECTED] writes:
Tengo una notebook con Red Hat 5.2. Quiero hacerle un Upgrade ;)
a Debian. Mi problema: el BIOS no soporta bootear desde CD...y el
drive de floppy ha cascado!!!
utiliza el archivo de proceso por lotes (.bat) que hay en el CD, creo
que
Alguien me podría hacer una referencia rápida sobre que versión corresponde
a cada nombre (desde la 1.3)? Ya se me hizo un matete.
El otro día pregunté si alguien conocía algún site sobre programación de
sockets, y me recomendaron http://www.sockets.com, pero ayer entré y es
sobre programación de WinSockets.
Es correcto esto, o yo cometí algún error?
Si es así, necesitaría algún otro site sobre programación de sockets, pero
On Tue, Apr 20, 1999 at 11:50:06AM +0200, juanma wrote:
La pregunta que quisiera formulaos es cómo hacer que una máquina externa
funcione mediante el ordenador controlando el puerto serie o paralelo del
bicho.
Yo no lo he probado pero tiene que ser facil...
Hasta donde yo se, todos los
On Wed, 21 Apr 1999, [iso-8859-1] Javier Viñuales Gutiérrez wrote:
Hola, el otro día ya pregunté lo mismo y creía tenerlo resuelto con la
lectura de una doc (epslatex.ps, Using Imported Graphics in LaTeX 2e) pero
haciendo las cosas que leo sigo sin poder incluir gráficos gif en latex.
Yo
Hola,
Instalo el Debian 2.1 y actualizo el kernel al 2.2.x. Actualmente tengo el
2.2.6. Resulta que tengo el siguiente problema. Configuro el kernel de forma
habitual tal y como lo suelo hacer siempre. Y hago luego
make dep
make clean
make bzImage
make modules
make modules_install
cp
Hola lista, mi pregunta es muy sencilla, tengo el LILO configurado
para que arranque Linux o Windows. Por defecto me arranca Linux, y me
gustaría cambiar ésto para que arrancara Windows.
Gracias por la ayuda.
Manuel Jerez Cßrdenes wrote:
Hola lista, mi pregunta es muy sencilla, tengo el LILO configurado
para que arranque Linux o Windows. Por defecto me arranca Linux, y me
gustaría cambiar ésto para que arrancara Windows.
Edita el fichero /etc/smb.conf y cambia el orden en el que
Hola,
On Wed, 21 Apr 1999, Javier Viñuales Gutiérrez wrote:
Hola, el otro día ya pregunté lo mismo y creía tenerlo resuelto con la
lectura de una doc (epslatex.ps, Using Imported Graphics in LaTeX 2e) pero
haciendo las cosas que leo sigo sin poder incluir gráficos gif en latex.
te lo has
On Wed, Apr 21, 1999 at 06:35:28PM -0400, [EMAIL PROTECTED] wrote:
[...]
Si no es asi, de todos modos me dijeron que el 2.2.6 esta estable,
algun lugar para conseguirlo en .deb???
El 2.2.5 está en potato. Supongo que en un par de días estará el 2.2.6
P.D.: Alguien comento de un proyecto de
On Thu, Apr 22, 1999 at 09:14:15AM +0200, Ángel Carrasco wrote:
Hola,
Instalo el Debian 2.1 y actualizo el kernel al 2.2.x. Actualmente tengo el
2.2.6. Resulta que tengo el siguiente problema. Configuro el kernel de forma
habitual tal y como lo suelo hacer siempre. Y hago luego
make dep
On Sat, Apr 17, 1999 at 08:09:36PM +0200, Andres Seco Hernandez wrote:
Hola
El 14 Apr 1999 a las 10:47AM +0200, Javier Fdz-Sanguino Pen~a escribio:
Umm.. la respuesta es muy sencilla, y te lo cuenta el artículo que
escribí en OpenResources (http://www.openresources.com).
Los
Hola Angel.
¿Tienes configurado tu cliente de mail para que se haga alguna justificación
de mail leido o algo por el estilo?
Lo digo por que siempre que leo tus emilios, por norma general desde el
curro y con el Huevosluck'98, se genera un mensaje de salida
automáticamente. Todavía no he abierto
Acabo de recibir la Debian 2.1 de Datom. Son rapidísimos.
Antes tenía la 2.0
Yo no busco estar a la última. Tengo necesidades muy concretas y
urgentes. Me urge subir la version de sane que ya admite escanner de puerto
paralelo y subir tambien la versión del kernel porque el que uso 2.0.29
como ya
¿Tienes configurado tu cliente de mail para que se haga
alguna justificación
de mail leido o algo por el estilo?
Pues tienes razon, ni me habia percatado, debe de ser de cuando lo instale
que estuve cotilleando las opciones, gracias por avisarme, lo he
desactivado.
Saludos.
On Wed, 21 Apr 1999, Javier Viñuales Gutiérrez wrote:
Yo tengo puesto:
\usepackage{graphicx}
\usepackage[dvips]{epsfig}
Quita esa segunda linea, que no hace falta. El paquete graphicx es la
version moderna del antiguo epsf y psfig.
Luego haces lo que te dice Fernando Tricas en el otro
Yo he instalado Datom sin mayores problemas. Echa un vistazo a
los conflictos, la mayor parte de las veces se deben a acutalizaciones
de paquetes que tienen nuevas dependencias
Eso sí, uso el metodo multi_cd2, como aconsejan en su README.
Jesus.
Antonio
Javier Viñuales Gutiérrez wrote:
Hola a todos, al arrancar el sistema (kernel 2.2.6) el tipo me dice:
Partition check:
hda:hda: set_multmode: status=0x51 { DriveReady SeekComplete Error }
hda: set_multmode: error=0x04 { DriveStatusError }
hda1 hda2 hda5 hda6 hda7 hda3 hda4
hdb: hdb1
Estoy intentado poner en marchar el soporte pts de los kernels 2.2.x. He
compilado con esta opción, he crado el directorio /dev/pts y he incluido el
montaje del sistema de archivos en el fstab.
Despues de todo esto parece que el sistema al arrancar si detecta los pts,
pero si realizas una conexion
Hola a todos:
Funcionalidad:
Tenemos dos PCs conectados por un cable modem null por medio del COM1 de cada
PC.
En el PC cliente introducimos un login y un password, cuya cuenta ejecuta y
activa
el demonio pppd del PC cliente por el COM1 y debe de pasar el mismo login y el
mismo
password al
On Wed, 21 Apr 1999 [EMAIL PROTECTED] wrote:
Alguien me podría hacer una referencia rápida sobre que versión corresponde
a cada nombre (desde la 1.3)? Ya se me hizo un matete.
Esta y muchas otras preguntas están contestadas en la lista de
preguntas frecuentes (FAQ), instala el paquete
Enrique Zanardi wrote:
On Tue, Apr 20, 1999 at 08:34:24PM +0200, Ramiro Alba wrote:
[...]
En la instalación de communicator 4.5, por otra parte, fué un cristo.
Tuve que instalar manualmente dpkg-awk del primer CD y netscape-base-4
del segundo CD, aunque esta vez no me dejó frito el PC. En
de Jose Luis Trivino el Thu, Apr 22, 1999 a las 10:09:55AM +0200
X-Sistema-Operativo: Linux elsa 2.2.5
X-Buscador-Linux: http://search.gulic.org/
X-Agradecimientos: A mi mujer...
X-PGP: Buscar en http://www.gulic.org/
El Thu, Apr 22, 1999 a las 10:09:55AM +0200, Jose Luis Trivino dijo:
Manuel
Hola a todos
Muchas gracias a todos los que me han aclarado que no soy yo solo el
que tengo problema con el acceso a LuCas
[EMAIL PROTECTED] Respondio mi mensaje pero por lo que me dijo
parece que el no estaba enterado de los supuestos arreglos que se
estan haciendo.
Mando copia a pacopepe,
Tengo instalada la de potato que es la 2.1.1
dpkg -l libc6
Desired=Unknown/Install/Remove/Purge
| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err:
uppercase=bad)
||/ NameVersionDescription
On Wed, 21 Apr 1999, Antonio Castro wrote:
Bueno el trabajo que se hace en Debian es envidiable aunque me gustaría
que no estuvieseis tan a la defensiva.
El problema, Antonio, es que muchas veces parece que estás tú
a la atacativa.
El monstruo de la no amigabilidad es muy grande y pisa
Hola,
He instalado los paquetes del pine ver 3.96M, el src i el diff.
Después de realizar los siguientes pasos:
$dpkg-source -x pine_3.96M-2.dsc
$cd pine-3.96M
$debian/rules build
Se han creado los paquetes el pine, pico i pilot(?). Después con un
dpkg -i, he
Jose Mari Mor Fabregat:
He instalado los paquetes del pine ver 3.96M, el src i el diff.
Después de realizar los siguientes pasos:
$dpkg-source -x pine_3.96M-2.dsc
$cd pine-3.96M
$debian/rules build
Se han creado los paquetes el pine, pico i pilot(?). Después con
Si si... pero después de mucho mirar por los cuatro cd's... ¿dónde demonios
está el multi-cd2 ése...???
Yo instalo un multi-cd a secas sin dos que viene, pero no he podido
encontrar ningún ..-cd2.
Si eres tan amable de indicarme dónde está, o en su defecto, de dónde me lo
puedo bajar, te estaré
Jose Luis Trivino wrote:
Hola,
Hola
...
Mi problema es que no puedo montar discos de GuinDOS con
smbmount. Siempre me dice:
mount error: Invalid argument
Mirate los ficheros de log (el syslog me parece) y si dice algo como :'
... kernel: SMBFS: need mount version 6'
Correcaminos wrote:
de Jose Luis Trivino el Thu, Apr 22, 1999 a las 10:09:55AM +0200
X-Sistema-Operativo: Linux elsa 2.2.5
X-Buscador-Linux: http://search.gulic.org/
X-Agradecimientos: A mi mujer...
X-PGP: Buscar en http://www.gulic.org/
El Thu, Apr 22, 1999 a las 10:09:55AM +0200, Jose
Angel Vicente Perez wrote:
Claro que te conviene utilizarlo si quieres algo mas que
640x480 con 16 colores. Claro, que tambien puedes esperar a
que salga una nueva version de Xfree.
Pero yo estoy utilizando ahora el xserver-s3, y puedos visualizar TrueColor.
¿Seria ventajoso
The following section of this message contains a file attachment
prepared for transmission using the Internet MIME message format.
If you are using Pegasus Mail, or any another MIME-compliant system,
you should be able to save it or view it from within your mailer.
If you cannot, please ask your
Hola:-)
Tengo funcionando un servidor Debian(Hamm) con Samba (ver 1.9.18p8),
de momento los directorios compartidos con Samba estan totalmente
espatarraos, pero quiero p. ej.: que al directorio de cada usuario
solo pueda acceder el mismo. He intentado varias cosas como pone en
el Samba-Como,
On Thu, 22 Apr 1999, Jordi Roman Mejias wrote:
instalate el paquete smbfsx y monta los discos como a continuación
indico:
smbmount-2.1.x //maquina/recurso $1 -U usuario -c mount punto_anclaje
El problema, si no me equivoco, viene por un cambio en el kernel por lo
de los passwords
On 22-Apr-99 Iniaki Fernandez Villanueva wrote:
On Thu, 22 Apr 1999, Jordi Roman Mejias wrote:
instalate el paquete smbfsx y monta los discos como a continuación
indico:
smbmount-2.1.x //maquina/recurso $1 -U usuario -c mount punto_anclaje
El problema, si no me equivoco, viene por un
No tengo DOS, solo tengo Linux, y no tengo los drivers para DOS del
CD...funcionara en dosemu?
--
__ |Mario Camou
__-- --___ |Chief Technology Officer
_-| - _ --_ |Umbral
Samba me iba a las mil maravillas hasta que en uno de los PC's han
instalado el windows98 ese. Con win95 los passwords no se encriptaban y
todo iba bien, pero creo que win98 si los encripa y aunque tengo en el
smb.conf un YES en encriptar (secure=user) ahora nunca puedo acceder del
Mario:
Tengo una notebook con Red Hat 5.2. Quiero hacerle un Upgrade ;)
a Debian. Mi problema: el BIOS no soporta bootear desde CD...y el
drive de floppy ha cascado!!!
Marcelo:
utiliza el archivo de proceso por lotes (.bat) que hay en el CD, creo
que se llama install.bat, eso arranca de
Hola
Echa una ojeada en http://www.matrox.com
No hace mucho me pasé por allí y además de la versión 6.01 las directX
para güindogs me pareció ver un link para la descarga de drivers para linux.
Evidentemente, tienes que mirar en la sección DOWNLOAD DRIVERS.
Salu2
__
Incluso DIOS discute
On Thu, Apr 22, 1999 at 02:27:18PM +0200, Ramiro Alba wrote:
[...]
El segundo problema es que si selecciono varios paquetes de manera que unos
estan en el
primer CD y otros en el segundo, envia errores de Wrong CD y pide que se
utilice apt-get
varias veces poniendo --fix-missing. Por
On Thu, Apr 22, 1999 at 01:56:25PM +0200, Antonio Castro wrote:
On Thu, 22 Apr 1999, Enrique Zanardi wrote:
La cr?tica destructiva no conduce a nada.
Cr?tica desctructiva parece ser cualquier opini?n que a ti no te gusta.
Crítica destructiva es para mi una opinión negativa sobre aspectos
Enzo A. Dari escribió:
Ignacio J. Alonso wrote:
(...)
Si descomento la linea default=Win98 el resultado es el mismo pero el
asterisco aparece en
Win98. Pues bien, en cualquiera de los dos casos soy incapaz de que
funcione, es decir siempre arranca W98 haga lo que
On Thu, Apr 22, 1999 at 12:51:48PM +0200, Antonio Castro wrote:
[...]
Entro en Dselect y sin a?adir nada doy a actualizar y me salen un
monton de conflictos tipo tal cosa depende de tal otra y tal cosa
parece que no existe. Pero sin a?adir ningun paquete es esto posible ?
Es problema de mis
Hola compañeros,
Utilizo Linux como servidor de correo e internet para una red de Güindous,
con masquerade y un cortafuegos.
No puedo bajarme desde el Netscape 4.5 en un Güindous-95 (a traves del
Linux) un archivo gordo por FTP (3.8MBytes), en cambio si puedo bajarme
archivos más pequeños
Santiago Vila wrote:
No, ese install.bat utiliza loadlin, y no se puede usar loadlin para
arrancar Linux desde dentro del propio Linux.
Lo supuse. Trate de pasar los datos de loadlin usando LILO pero dio
precisamente el error :(
Lo mejor es que arregles la unidad de disquete.
De hecho penso
On Thu, Apr 22, 1999 at 03:49:35PM -0500, Mario Camou wrote:
Otra cosa que puedes hacer es seguir la receta para actualizarse
de Red-Hat a Debian, aunque es un método peligroso, hay gente que lo ha
conseguido, mira en los archivos de debian-user (lo siento, no me acuerdo
de quién lo hizo
Hola a todos,
Ya funciono!
Por si algun dia necesitan hacer algo similar, les paso como hacerle:
# swapoff -a
# mke2fs /dev/hda2 --- Nota: /dev/hda2 era mi swap
# mount /dev/hda2 /mnt
# cd /cdrom/install--- En /cdrom esta el CD 1 de Debian
# cp linux root.bin
El miércoles 21 de abril de 1999 a la(s) 20:44:48 +0200, Iniaki Fernandez
Villanueva contaba:
Necesito saber como quitar el beep
Yo lo he cambiado:
setterm -blength 25 -bfreq 150
Y ya no molesta tanto de noche. Si le pones -blength 0 se anula
del todo, pero ya que
El jueves 22 de abril de 1999 a la(s) 13:59:53 +0100, Jose Rodriguez contaba:
hda:hda: set_multmode: status=0x51 { DriveReady SeekComplete Error }
hda: set_multmode: error=0x04 { DriveStatusError }
A mi tambien me salen y se deben a los discos duros que emplean UDMA (Ultra
DMA), que parece
El miércoles 21 de abril de 1999 a la(s) 20:32:12 +0200, Ignacio J. Alonso
contaba:
# Sección Global
Añade linear.
¿Puede ser debido a que /dev/hda3 no la tengo como bootable? pero es
que si con cfdisk la pongo bootable (como la partición /dev/hda1) entonces me
da
un error en la
El jueves 22 de abril de 1999 a la(s) 15:36:22 +0200, Jose Mari Mor Fabregat
contaba:
- ¿tengo que tener algo en cuenta (seguridad, problemas,etc)
sobre este paquete y esta versión en especial?
En Bugtraq han puesto a parir al pine repetidas veces. Incluso
hay
On Thu, Apr 22, 1999 at 03:35:10PM +0200, Hue-Bond wrote:
$ dpkg -l tripwire
No packages found matching tripwire.
¿Comorl? Si Debian es la distribución más segura pensé que
incluiría este programa pero veo que no. ¿Alguien me lo explica?.
Yo lo he visto por el non-us (¿o
On Thu, 15 Apr 1999, Andres Herrera wrote:
Guenas
On Tue, Apr 13, 1999 at 04:03:09PM +0200, Hue-Bond wrote:
El lunes 12 de abril de 1999 a la(s) 22:53:31 +0200, Juan Ramón Larrea
contaba:
Creo que se está buscando un nuevo logotipo para Debian.
No no
On Tue, 20 Apr 1999, Santiago Vila wrote:
On Tue, 20 Apr 1999, Ángel Carrasco wrote:
Soy un novato en esto. ¿Cómo podría pasar de paquetes tar.gz a paquetes deb?
Usa alien.
De la página man de alien:
Note that for the .tar.gz format, alien will simply gener-
ate a .deb
Guenas
On Thu, Apr 22, 1999 at 09:38:54AM +0100, Enrique Zanardi wrote:
Si no recuerdo mal son:
1.1 - buzz
1.2 - rex
1.3 - bo
2.0 - hamm
2.1 - slink
la próxima - potato
Y la siguiente es Sid, ¿no?
Mi niño esta loco porque un dia le diga que el ordenador funciona con la
Debian Woody :-)
Daniel Doro Ferrante wrote:
Evite compilar qualquer coisa que já esteja empacotada. No caso, o
SATAN está empacotado para a Potato, não custa tentar usar.
http://cgi.debian.org/cgi-bin/search_packages.pl?keywords=satansearchon=namesversion=
allrelease=all
Oi
Salve,
Bom galera instalei o gnome
com todos os arquivos release - gnome-libs1.08.. etc... bom na hora de rodar
ocorre o seguinte erro
libpng erro: Incompatible Libpng version in
application and Library
Bom atualizei a libpng 1.0.3
mas nao consegui achar uma solucao, o
Enlightenment e
On 22 Apr 1999, Miquel van Smoorenburg wrote:
Ofcourse. You misread the docs; it says _not_ to change the hosts: line.
The exact wording is:
2.4 HOSTS:
Normally you should not do host lookups through NIS, use DNS for that.
If you really must use NIS for it, here's how to do
I got sold on Debian after reading today's discussion on slashdot.
However, there doesn't seem to be anything in the Debian web site about
how one goes about installing from ftp. It only tells me that it is
possible. So what disk images, etc. do I need?
Thank you in advance,
Chris Gray
unsubscribe
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, April 21, 1999 3:50 PM
Subject: debian-user-digest Digest V99 #721
unsubscribe
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, April 21, 1999 1:52 PM
Subject: debian-user-digest Digest V99 #720
On Wed, 21 Apr 1999, Kent West wrote:
At 02:40 PM 4/21/1999 -0600, [EMAIL PROTECTED] wrote:
I have downloaded Debian 2.1 and all of the packages to the harddrive
on my Dell GX1 400MHz with a WD 6.4GB drive. I got the kernel and base
system installed fine. Using 'dselect' I chose the Dialup
I just received the Debian announcement about the alliance between
Corel, KDE and Debian. This is potentially a very good thing for
Debian. It may pave the way for a much wider acceptance of Debian ---
via the Corel linux distribution --- and ensure Debian maintains its
influence on the
Chris Gray wrote:
I got sold on Debian after reading today's discussion on slashdot.
However, there doesn't seem to be anything in the Debian web site about
how one goes about installing from ftp. It only tells me that it is
possible. So what disk images, etc. do I need?
Thank you in
*- On 21 Apr, Chris Gray wrote about How do I do an ftp install?
I got sold on Debian after reading today's discussion on slashdot.
However, there doesn't seem to be anything in the Debian web site about
how one goes about installing from ftp. It only tells me that it is
possible. So what
[cc'd to -user]
I need to develop Linux for Khmer (Cambodia). Need help please!
Please reply to [EMAIL PROTECTED] or [EMAIL PROTECTED]
Please ask questions like this on debian-user, where you will probably
receive more useful help. Debian-mentors is for helping new
developers learn how to
Hi,
I am using slink. I remember I after I upgraded from hamm to slink the
scrollbar in Xman was solid grey. At some point this changed. Now they are
white with dotted lines. These dotted lines are all over the gui
actually, around Options and Section also. I have seen the same on other
primitive
On Wed, Apr 21, 1999 at 07:43:17PM -0500, Christian Dysthe wrote:
I am using slink. I remember I after I upgraded from hamm to slink the
scrollbar in Xman was solid grey. At some point this changed. Now they are
white with dotted lines. These dotted lines are all over the gui
actually, around
hello List ...
anyone know what came out of that debin logo contest announced 2 months
ago ? ... i also saw some Debian logo at slashdot (debian/corel/kde news)
... is that the official debian logo ?
TIA
chad
The following will workl there are other solutions around, maybe using dpkg.
$ find /var/lib/dpkg/info -name '*.list' | xargs grep pstogif
The 'Contents.gz' file should also be able to tell you.
Carl
I recently set up a network of machines using the private IP addresses
192.168.1.xxx. All machines are running Debian, a mix of bo, hamm, and
slink. One slink machine which has two ethernet interfaces, 192.168.1.1
and a real non-private IP, has the ipmasq package installed and is the
gateway to
Hi! I'm trying to install Debian on an old Packard Bell that I
have acquired. It has a CR-563b (sbpcd module). I already
have Debian installed on another computer, and burned a cd image of
Slink with my CD-R. The MD5 checksummed OK, and I verified the CD-image
from my 24x reader and my 4x writer.
Chad A. Adlawan wrote:
hello List ...
anyone know what came out of that debin logo contest announced 2 months
ago ?
They are voting again.
... i also saw some Debian logo at slashdot (debian/corel/kde news)
... is that the official debian logo ?
No.
Check out the last two Debian
The problem with systems like Notes and Exchange is that they use
proprietary protocls for communication (as far as I know). Because of
this, I am currently in the process of drafting an RFC for an open
protocol with similar funcionality. Hopefully people will be able to agree
on this (or a
On Wed, 21 Apr 1999, Chris Gray wrote:
: I got sold on Debian after reading today's discussion on slashdot.
: However, there doesn't seem to be anything in the Debian web site about
: how one goes about installing from ftp. It only tells me that it is
: possible. So what disk images, etc.
On Wed, Apr 21, 1999 at 09:48:40PM -0500, Stephen Pitts wrote:
[...]
and burned a cd image of Slink with my CD-R.
[...]
The problem is that the PB's CD-ROM fails intermittently. I randomly get
errors extracting the base system. Of the 5 times I've tried to install,
several times I've gotten
Can someone please tell me how to get removed from this mailing list.
NOTE: Before you let the flames fly realize that I have tried all of the
suggested ways to get removed, i.e.
mail -s unsubscribe [EMAIL PROTECTED] I've also tried
sending unsubscribe commands such as:
unsubscribe [EMAIL
I was hoping someone could help me.
I have a system with 128 meg. of memory but I believe Linux only
sees half of it and the rest is wasted.
Here's an output from 'top'
53 processes: 51 sleeping, 1 running, 0 zombie, 1 stopped
CPU states: 33.2% user, 11.8% system, 0.0% nice, 55.0% idle
Mem:
On Wed, 21 Apr 1999, Ernie Pasveer wrote:
I was hoping someone could help me.
...
I should follow up my own message by saying the available memory 64236K av
Mem: 64236K av, 40180K used, 24056K free, 10932K shrd, 2548K
buff
never changes no matter what my system load is.
Linux won't recognize memory above 64 megs by itself. You need to add
'mem=128m' in your lilo.conf file. (or rather append = 'mem=128m'). Check
out the lilo.conf man page for better details, I can't remember the exact
syntax at the moment.
--Dano
-Original Message-
From: Ernie
Hi
I would like to find out the following :
1. My PC has a ATI Rage Pro AGP 2X (for DVD) video card. Does the latest
version of
Debian Linux support this card ?
2. Anyhow, I started with Debian installation. Am not able to connect to
my ISP (GTE)
using pppconfig. The connect script fails. I
You must be using a kernel previous to 2.0.36... earlier kernels have problems
atodetecting memory above 64 megs, since the bios doesn't report more then
64megs.
What you have to do is to put mem=128m on the command line to the kernel.
You can type this by hand at the LILO: prompt, i.e.
LILO:
Dan Willard [EMAIL PROTECTED] writes:
Linux won't recognize memory above 64 megs by itself. You need to add
'mem=128m' in your lilo.conf file. (or rather append = 'mem=128m'). Check
out the lilo.conf man page for better details, I can't remember the exact
syntax at the moment.
Just want
Hi all,
By putting together ideas from a few posts here and in linux-kernel, i've
managed to get StarOffice 5.01 working on my Potato box. Now, i have two
problems:
1) i know it works on my box. But what about anyone else's?
2) If it does work, what do i do to let people know how to do it? Just
I have a system with 128 meg. of memory but I believe Linux only
sees half of it and the rest is wasted.
The kernel will only autodetect 64 megs (apparently there was a bug in
some older PCs which caused problems if you probed beyond 64 megs).
You need to pass an argument to the kernel at boot
On 21-Apr-99 Jiri Baum wrote:
Hello,
is there anything like run-parts that would run all the scripts at the same
time, and then wait for all of them to finish?
I wouldn't mind having most of my ip-up.d run together - I suspect there's
a lot of time spent idle waiting for protocol
On 21-Apr-99 Richard E. Hawkins Esq. wrote:
It's time to update the kernel for my laptop,and I'm trying to use
make-kpkg to do this. I've managed to get the kernel image .deb built,
but not the pcmcia stuff.
I've updated to the pcmcia-source from potato, and note that it has
.debs
On 21-Apr-99 Ulrik Haugen wrote:
I followed a link to
http://www.uk.debian.org/releases/stable/running-kernel-2.2
It said one ought to upgrade a few packages to the unstable versions
to run a 2.2.x kernel.
I downloaded these and ran dpkg -i package.deb,
downloaded a few more as dpkg
On 22-Apr-99 Aseem Agarwal wrote:
Hi
I would like to find out the following :
1. My PC has a ATI Rage Pro AGP 2X (for DVD) video card. Does the latest
version of
Debian Linux support this card ?
I believe the answer is the new 3.3.3.1 packages do. To be sure, go to
xfree86.org and read
Here is the link, as promised:
http://www.menet.umn.edu/~kaszeta/unix/xterminal/
I just verified it this morning. Basically, it tells how he set up several cheap
'486's the school had sitting around idle as X Terminals.
I hope it works for you, I am still looking for a cheap PC for my daughter
:- shaleh == shaleh [EMAIL PROTECTED] writes:
I'm trying to compile a program that has -lX11 in the compiler
options, but the compiler doesn't filnd the relevant library. What
shall I put in place of the plain X11?
Before the -lX11 place -L/usr/X11R6/lib. Make sure
On Wed, 21 Apr 1999 17:16:33 -0400, Richard E. Hawkins Esq. [EMAIL
PROTECTED] said:
Richard It's time to update the kernel for my laptop,and I'm trying to use
Richard make-kpkg to do this. I've managed to get the kernel image .deb
Richard built, but not the pcmcia stuff.
Richard I've updated
Hi,
I upgraded my hamm system (Debian 2.0) to slink (Debian 2.1) using the
cd's from Linux Central. Everything went well. I am having some problems
with the system after upgrading which seem strange.
1. After upgrading, I cannot find the program telnet. Previously it was
in netstd, but the
On Wed, Apr 21, 1999 at 14:07:17 -0400, Noah L. Meyerhans wrote:
As long as the license conforms to the Debian Free Software Guidelines, a
package can be included in main. Last I heard, the QPL looked like it
conformed...
It does. Our very own Joseph Carter put a lot of work in getting as
Hi!
I have following warning when I start emacs:
$ Warning: locale not supported by C libary, locale unchanged
What does it mean ?
--
//Thanks Johan
On Thu, Apr 22, 1999 at 10:20:22 +0200, Johan Pettersson wrote:
I have following warning when I start emacs:
$ Warning: locale not supported by C libary, locale unchanged
What does it mean ?
Just a guess
- You don't have the locales package installed, or
- You have locales environment variable
Could anyone who's online just now let me know what the proc line should
look like in /etc/fstab ?. Unfortunately I messed it up
and none of modules are loading correctly.
Many thanks
angus claydon
1 - 100 of 209 matches
Mail list logo