Hola a todos/as:
Se me plantea una duda con respecto a las controladoras scsi. Vereis, tengo
un scaner que usa una AVA-1505AE isa, que todavia no he hecho funcionar en
mi Debian, pero ahora voy a comprarme una grabadora scsi con otra
controladora scsi, una Advansys 3925/6 pci, oem, y me gustaría
El jueves 17 de junio de 1999 a la(s) 11:24:32 +0200, Manuel Trujillo contaba:
¿Verdad que es una pasada estar malgastando ancho de banda y espacio en el
disco duro con mesajes que se han leido, o en su defecto, con toda la paja
que ya no sirve?
No te lo vas a creer pero yo pensé en
El jueves 17 de junio de 1999 a la(s) 15:25:39 +0200, Javier Fdz-Sanguino Pen~a
contaba:
2)Que diferencia hay entre y
no es valido, que yo sepa, convierte al fichero que le sigue en
entrega estandar para el programa.
es para... ¿cómo explicarlo?
$ cat holas __EOF__
Buenas!
Hago un dpkg -I al xcdroast de la Hamm y me aparece esto:
Depends: cosas, tix41 (=4.1), cosas, tix41 (=4.1.0.6-2), cosas
¿Cómo es posible que dependa de dos versiones de tix41? ¿Qué
pasaría si meto la 4.1.0? ¿Es un bug? La Hamm lleva la la 4.1.0.6-3
Hola:
Hace unos dias compre una nueva tarjeta de video, con un chip RIVA 128.
Para poder instalarla correctamente es necesario cambiar la version de
XFree86 de la 3.3.2 a la 3.3.3.1. Para ahorrarme trabajo intentente
instalar el paquete que viene incluido en el C.D. de Ret Hat 6.0. Sin
embargo
HOLA A [EMAIL PROTECTED]:
ESTUVE NAVEGANDO LA SECA, LA MECA Y TODO LO QUE QUIERAN Y NO ENCONTRE UN
MANUAL DE MANEJO (O DE JUMPER SETTINGS QUE LLAMAN) PARA UNA MAINBOARD CON CHIP
BIOS DE AMERICAN MEGATRENDS, SEGUN LA PAGINA DE FABRICANTES QUE IDENTIFICA LA
AMIBIOS, LA BOARD FUE FABRICADA POR UNA
HOLA A [EMAIL PROTECTED]:
ESTUVE NAVEGANDO LA SECA, LA MECA Y TODO LO QUE QUIERAN Y NO ENCONTRE UN
MANUAL DE MANEJO (O DE JUMPER SETTINGS QUE LLAMAN) PARA UNA MAINBOARD CON CHIP
BIOS DE AMERICAN MEGATRENDS Y CON CHIPSET UMC 8886BF Y UMC 8881F. EL NUMERO DE
BIOS REFERENCE QUE ME APARECE EN
Camilo Alejandro Arboleda escribió:
Hace unos dias compre una nueva tarjeta de video, con un chip RIVA 128.
Para poder instalarla correctamente es necesario cambiar la version de
XFree86 de la 3.3.2 a la 3.3.3.1. Para ahorrarme trabajo intentente
instalar el paquete que viene incluido
Tampoco hace falta gritar tanto, hombre!
El sáb, jun 19, 1999 at 07:37:24 -0500 ZUMBIJUNIOR va dir:
HOLA A [EMAIL PROTECTED]:
ESTUVE NAVEGANDO LA SECA, LA MECA Y TODO LO QUE QUIERAN Y NO ENCONTRE UN
MANUAL DE MANEJO (O DE JUMPER SETTINGS QUE LLAMAN) PARA UNA MAINBOARD CON CHIP
BIOS DE
On Fri, Jun 18, 1999 at 09:35:35PM +0200, Javier Viñuales Gutiérrez wrote:
Hola lista!
Tengo un problema desde hace dos días que no se a qué viene. No puedo
mandar mensajes puesto que me dice esto el sendmail:
Jun 18 21:29:05 akela sendmail[626]: VAA00608: [EMAIL PROTECTED],
ctladdr=vigu
Miquel [EMAIL PROTECTED] wrote:
Tampoco hace falta gritar tanto, hombre!
Te voy a aclarar algunas cosas que parece que no entendiste:
1. No escribo en esta lista para que personas como tú me critiquen si escribí
de una u otra manera. Escribo para solicitar ayuda respecto a un problema que
Como reza el subject, pues que al intentar arrancar PostgreSQL me
sale este horror.
su: problem establishing PAM_RUSER
Todavía no he pillado la onda a la forma de trabajar del 'PAM'.
Si alguien puede dar un 'overview' sobre estas herramientas, se lo
Hola compañeros de DEBIAN;
TEngo que instalar la Distribucción de DEBIAN en un Ordenador para poder hacer un proyecto del curre, el caso que he comprado la distribucción de Citius Debian GNU/LINUX, la instalo correctamente (Eso creo), pero cuando tengo que reiniciar el Ordenador para empezar a
de A.B.G. el Sat, Jun 19, 1999 a las 11:04:38PM +0200
X-Buscador-Linux: http://search.gulic.org/
El Sat, Jun 19, 1999 a las 11:04:38PM +0200, A.B.G. dijo:
Hola compañeros de DEBIAN;
TEngo que instalar la Distribucción de DEBIAN en un Ordenador para
poder hacer un proyecto del curre,
El Wed, Jun 16, 1999 at 11:51:34PM +0200, Javier Viñuales Gutiérrez contaba:
[EMAIL PROTECTED] timidity nuages.mid
/dev/dsp: Device or resource busy
Couldn't open Linux dsp device
Truco del almendruco:
Una de las pocas ventajas que tiene la SB64 es que trae dos dsp.
Tienes que tener
El sáb, 19 jun 1999, A.B.G. escribió:
Hola compañeros de DEBIAN;
TEngo que instalar la Distribucción de DEBIAN en un Ordenador para poder
hacer un proyecto del curre, el caso que he comprado la distribucción de
Citius Debian GNU/LINUX, la instalo correctamente (Eso creo), pero cuando
- Forwarded message from Edson Lima Monteiro [EMAIL PROTECTED] -
Date: Fri, 18 Jun 1999 14:38:22 -0300 (EST)
From: Edson Lima Monteiro [EMAIL PROTECTED]
To: Rafael Caetano dos Santos [EMAIL PROTECTED]
Subject: Re: RES: Configurações IDE
Oi
Estou interessado em ajudar no esforco de
Oi gente,
olhe so a nossa iniciativa...
Abracos,PH
Diego Delgado Lages wrote:
Eu coloquei disponível no CVS da linuxlabs um módulo chamado debian-pt que
contém (a princípio) o arquivo Packages (tá descompactado) da Debian. Espero
que todos colaborem façam como na última vez
ed,
i fear, we could annoy some people if we continue to discuss a
non-debian-specific matter on a debian mailinglist. shouldn´t we go back
to pm?
Ed Cogburn wrote:
A) I made up the MIMEtypes when I added those
Preferences-Navigator-Applications entries, Hartmut. The
important things are
BC == Ben Collins [EMAIL PROTECTED] writes:
BC Or you could install the debsums package which will also let you create
BC .md5sum files for packages that don't have them.
How do you do that? There is nothing in the manpage or in
/usr/doc/debsums about this.
Ciao,
Martin
MJ == Marcus Johansson [EMAIL PROTECTED] writes:
MJ They seems to work just fine. Anyone know how to test the glx-g200
MJ driver? The mesa-gl screensavers dont seem to be any faster etc...
Anything that is compiled against Mesa will do. But you either have to
recompile it against libGL, or
Hi friends
Hi
I'm a beginner in the Linux World and as my first step I have installed
Debian GNU/Linux 1.3.1 in a PC 486
/ 100 MHz through the floppy drive. My PC lacks of CD-ROM or network
connection.
Why 1.3? You could get 2.0
Anyway
$ I don't know how to use the dselect command ,
Shao Zhang wrote:
Hi,
Thanks for the help. But with the laststatus=2, I now have a bar, but
only with the filename
displayed. I would like to have as much as those in emacs...
If you add set ruler to your .exrc then you'll get the cursor position
also.
What information
David Brode wrote:
1. I just added an ethernet card to my system (3Com SC509TP) and I
understand that I'm supposed to use the driver 3c509. My question is *how*
do I get the system to load that driver? (If I were installing linux again
I could use dbootstrap, but I have the feeling
Subject: newbie: installing new drivers
Date: Fri, Jun 18, 1999 at 04:54:10PM -0600
In reply to:David Brode
Quoting David Brode([EMAIL PROTECTED]):
1. I just added an ethernet card to my system (3Com SC509TP) and I
understand that I'm supposed to use the driver 3c509. My
Hi all.
I just upgraded a bunch of packages from 2.0.36 to 2.2.10 kernel (Did not
install glibc2.1, left it at libc2.0.7 latest version, upgraded all
packages needed for 2.2.10 kernel and ones suggested in the kernel readme
file.)
I just tried to access my windows partition. The root of it (just
I try to connect to company's intranet using TCP/IP. ( I did it in win98
platform). I tried pppconfig but failed to connect. I have the following info.
DNS server name
Phone No.
User name
Password
Protocal(CHAP,PAP)
Is there anything I am missing in order to connect?
I appreciate your help in
I was doing some upgrading/system cleanup, when I got this error from
dpkg:
(Reading database ... dpkg: error processing /Files/apt_0.1.9.deb
(--install):
error reading files list file for package `kernel-source-2.0.34':
Input/output error
Errors were encountered while processing:
Is there a way in linux that I can find the installed device and driver? So
that I can upgrade the old driver once it is available.
Thanks
Daniel
Does anyone know that ATI 3D Rage Pro video card is supported in linux 2.1?
Thanks
Daniel
I called AOL and asked for DNS address. They didn't tell me. I am going to
pick up another ISP. What is your suggestion on which ISP to use
Thanks
Daniel
Just run modconf. It is the same program that is used during setup. You
might have to play with ios and irqs if first attempts fail.
Sergey.
On Fri, 18 Jun 1999, David Brode wrote:
1. I just added an ethernet card to my system (3Com SC509TP) and I
understand that I'm supposed to use the
pick up another ISP. What is your suggestion on which ISP to use
Thanks
Daniel
This was in the discussion just a bit ago.
Basically, any ISP with dialup access will do. Dump AOL.
Andrew
---
Andrei S. Ivanov
I've posted a message earlier about dpkg not installingI found the
source of problem. Turned out after the upgrade of almost all vital
packages filesystems do not umount at hte poweroff/reboot. Also, the disk
is 16.4% non-contigiuos. That was causing problems with certain files,
which happened
AOL uses their own proprietary client software, so there's probably little
chance it'll ever run on anything other than Windows and Mac. At this
point, there's not even a way to work around the crappy client to get a
direct PPP connection.
Personally I use Netcom/MindSpring and ATT Worldnet on
On Fri, Jun 18, 1999 at 09:17:56AM -0400, David H. Silber wrote:
# Set up a virtual interface.
#
# Usage:
#virtualif Interface IP number netmask broadcast [reset]
virtualif() {
I didn't like that my previous solution, because it only dealt reasonably
with one physical interface at a
I installed Debian 2.1 and tried to recompile the 2.0.36 sources.
During the link phase I got lot's of unresolved references. What is
missing?
ld -m elf_i386 -Ttext 0x10 -e stext arch/i386/kernel/head.o
init/main.o init/version.o \
arch/i386/kernel/kernel.o arch/i386/mm/mm.o kernel/kernel.o
Dear Jaroslaw,
many thanks for your interest. Actually debian system is new for me,
So could you please let me know step by step how can I install my printer
to my PC.
First I have kernel with lpr support installed in my system also I
have lpr command what after that?.
How can I
It was Today at 00:23 that [EMAIL PROTECTED] wrote about ATI 3D Rage Pro
Does anyone know that ATI 3D Rage Pro video card is supported in linux 2.1?
You can use it. I have in a compaq 5170.
--
Contact me? Try [EMAIL PROTECTED] : [EMAIL PROTECTED] or
visit
After upgrading to slink, dosemu is not working. So I removed it again,
including all the old configuration files and reinstalled it.
When I do a dpkg -L dosemu I see inter alia:
/etc
/etc/dosemu
/etc/dosemu/conf
/etc/dosemu/users
/var
/var/lib
/var/lib/dosemu
/var/lib/dosemu/hdimage.first
subscrive it
Thanks to recent help from Nico Galoppo Peter Makholm I have installed the
crucial RPM's that I need using Alien. They work great!!
Now that I know I will be able to use this system I wish to load my files from
tapes. I am confused over whether I should have Ftape selected in the drivers
dhcpcd dies right after being started, within ~10 seconds. the error it
reports is
sendto (init): Operation not permitted
what does this error mean?
I'm using dhcpcd 0.70, the one that comes with slink (2.1r0), with a 2.0.36
kernel I configured and compiled. I thought it might have been
unsubscribe
I have just set up the base system for Slink. Anyone can help me on setting
up X windows and the rest of the packages?
Thank you
Jimmy
Andrei Ivanov wrote:
Any way to defrag the partition? defrag does not seem to be working, it
gives me error message:
bad magic number in super block
Andrei, this error also got me a while back when I tried out defrag,
and as usual, reading the man page turned out to be a good idea :-)
To
When I tried purging the package bc the following thing happened;
dpkg: error processing bc (--purge):
unable to delete control info file `/var/lib/dpkg/info/bc.postinst':
Operation not permitted
And then I tried to remove the file manually being root;
rm: cannot unlink `bc.postinst':
On Sat, Jun 19, 1999 at 06:10:44PM +0800, Jimmy wrote:
I have just set up the base system for Slink. Anyone can help me on setting
up X windows and the rest of the packages?
Read the HOWTO's in /usr/doc/HOWTO/ or possibly /usr/doc/HTML.
Look at $ man command name and $ info command name
Then
On Fri, Jun 18, 1999 at 06:22:16PM -0700, Mark Wagnon wrote:
Shao Zhang wrote:
Hi,
Thanks for the help. But with the laststatus=2, I now have a bar,
but only with the filename
displayed. I would like to have as much as those in emacs...
If you add set ruler to
Hi,
check out man wvdial, gets you dialing 2 isps
easy. Sorry can't help with smail.
On Thu, 17 Jun 1999, Anthony Campbell wrote:
Is there any easy way of maintaining access to more than one ISP without
re-writing the config files for smail and ppp? At present I use a spare
computer for
Hi,
Just re-installed slink, only a couple of
hitches.
1. One day after running all day using
Wordperfect, playing the odd game of solitair,
Netscape (browsing), compiling qt 1.4 kde 1.0,
kmail (downloading, reading), it started running
slow. I had to reboot before it came good.
thanks.
--
Shao Zhang - Running Debian 2.1 ___ _ _
Department of Communications/ __| |_ __ _ ___ |_ / |_ __ _ _ _ __ _
University of New South Wales \__ \ ' \/ _` / _ \ / /| ' \/ _` | '
I'm using a debian systems for 3 years or so with no problem at all. But
recently I discovered a rather stranger behavior with inetd and
particularly with ftp
Imagine that an evil person want to crash your machine sending a lot of
non-authorized ftp requests like this (shell is zsh)
$ while
I am trying to set up NASA'S WISE project management system. I have the
Linux patched version from the website but am having difficulty
installing it, as the Linux patched version was designed for some other
distribution and distributed as WISE-1.0e.tar.gz I do not know what
Linux it was set up
On Sat, Jun 19, 1999 at 09:42:06PM +1000, Colin Tree wrote:
Hi,
Just re-installed slink, only a couple of
hitches.
1.One day after running all day using
Wordperfect, playing the odd game of solitair,
Netscape (browsing), compiling qt 1.4 kde 1.0,
kmail (downloading, reading),
On Sat, Jun 19, 1999 at 12:49:55PM +0200, Reine Johansson wrote:
When I tried purging the package bc the following thing happened;
dpkg: error processing bc (--purge):
unable to delete control info file `/var/lib/dpkg/info/bc.postinst':
Operation not permitted
And then I tried to remove
On Sat, Jun 19, 1999 at 12:54:03AM -0500, Andrei Ivanov wrote:
I've posted a message earlier about dpkg not installingI found the
source of problem. Turned out after the upgrade of almost all vital
packages filesystems do not umount at hte poweroff/reboot. Also, the disk
is 16.4%
On Sat, Jun 19, 1999 at 09:11:29AM +0200, Klaus Pieper wrote:
I installed Debian 2.1 and tried to recompile the 2.0.36 sources.
During the link phase I got lot's of unresolved references. What is
missing?
ld -m elf_i386 -Ttext 0x10 -e stext arch/i386/kernel/head.o
init/main.o
On Fri, Jun 18, 1999 at 04:44:44PM -0400, Alexander S Polyakov wrote:
hi all ,
what is analogue of Red Hat rc.sysinit on Linux/Debian ? thanks .
the best,
alex.
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
RedHat uses BSD-style init, and Debian uses
On Fri, Jun 18, 1999 at 02:45:47PM -0500, Kent West wrote:
I searched the archives for this, and found the same problem, but no
answer.
I've lost my network card on a 2.0.36 installation. It's a 3C509B card,
and on boot-up I see the error Symbol for parameter io not found.
After logging in
On Fri, Jun 18, 1999 at 08:39:11PM +0200, Werner Reisberger wrote:
I am running a debian machine (PC PII 350 MHZ, 128 MB RAM) as an Internet
server. Today the server crashed the second times after running one week
without any problems. The crash was caused by a kernel panic. Nothing has
been
Hi folks!
is qmail orphaned. qmail hasn't been updated for a long time.
TIA
PS. Cc: me (not subscribed)
bye
--
k e c h i e
It's now safe to turn off your computer means computing was unsafe
before it appeared. -- m e
can it be done, has anyone? any pointers?
Matthew McFarlane
-
Dyang50492 Does anyone know that ATI 3D Rage Pro video card is supported in
linux 2.1?
Dyang50492 Thanks
Dyang50492 Daniel
Dyang50492 --
Dyang50492 Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Hoping someone might know the answer to this...
Last week I upgraded my 2.0 debian system up to 2.1. fetchmail is now
barfing. The output I get is:
X message(s) for jgreshes at pop3.netaxs.com (X octets)
reading message 1 of X (X octets) fetchmail: SMTP listener doesn't like
recipient address
On Sat, Jun 19, 1999 at 09:52:13AM -, Paul wrote:
Thanks to recent help from Nico Galoppo Peter Makholm I have installed the
crucial RPM's that I need using Alien. They work great!!
Now that I know I will be able to use this system I wish to load my files from
tapes. I am confused over
Hi all,
from my old slackware days I remember that manual pages paged with
/usr/bin/less had color titles, keywords and so on. RedHat still has this.
I wonder if it is possible to have a colored man-output with Debian, too. Any
ideas?
thanks
--
Content-Length: 2937
Lines: 74
Howdy All!
This question - though simply stated - does produce an intereting problem.
Namely that there exists no *one* place a person can set system-wide
environmanet variables.
So far we've seen responces that indicate that Bourne-like shells will
use
I had a similar problem with smail. I got around it by using specifying
a MDA in .fetchmailrc.
Bob
On Sat, Jun 19, 1999 at 08:06:52AM -0400, Jason Greshes wrote:
Hoping someone might know the answer to this...
Last week I upgraded my 2.0 debian system up to 2.1. fetchmail is now
Daniel writes:
I try to connect to company's intranet using TCP/IP. ( I did it in win98
platform). I tried pppconfig but failed to connect.
Exactly what happened? Post the output of the 'plog' command.
Is there anything I am missing in order to connect?
What port is your modem on?
--
John
Hi,
I am setting up my debian at runlevel 5, so that I can startx at boot.
However, it only allows root to login. Whenever I login as a user, the
login window returns after I login. What did I do wrong? Thanks!
Best wishes,
Chip
On Fri, Jun 18, 1999 at 01:34:52AM +0100, Frankie wrote
Incidentally, on the subject of kernel 2.2.10 and make-kpkg, has anyone had a
compile
problem just after patching to 2.2.10?
Normally when I install a patch, I use a modified version of the patch-kernel
script,
and then I run
On Sat, Jun 19, 1999 at 01:54:56PM +0930, John Pearson wrote:
On Fri, Jun 18, 1999 at 01:34:52AM +0100, Frankie wrote
Incidentally, on the subject of kernel 2.2.10 and make-kpkg, has anyone had
a compile
problem just after patching to 2.2.10?
Normally when I install a patch, I use a
Hi,
I have a minor problem swapping floppy and cd-rom module on my Compaq LTE
5200. I can only make either /dev/fd0 or /dev/hdb recognized, but not
both at the same time. Sometimes, it takes several boots for the
transition to take effect. That is, when I switch from one module to the
When I run install in deselect, i get messages like these ones (hundreds
of them):
Skipping deselected package et.
Skipping deselected package expect5.24-dev.
Version 19971204-3 of f2c already installed, skipping.
Version 0.0-17 of fakeroot already installed, skipping.
Version 2.5.4a-3 of flex
hello everyone !
does anyone know of a way to change the default useradd or adduser
behaviour in terms of giving permissions to the new users home directory ?
that is, when u add a new user, the permission on his/her new home dir is set
at 755. is there any way to make the default settig to
*- On 19 Jun, Johan Ur Riise wrote about dselect, database out of sync?
When I run install in deselect, i get messages like these ones (hundreds
of them):
Skipping deselected package et.
Skipping deselected package expect5.24-dev.
Version 19971204-3 of f2c already installed, skipping.
Johann Spies wrote:
[about dosemu problems]
don´t know, what´s going wrong. but i wouldn´t bother.
i´ve just ´slinked´ dosemu 0.98.7, installed and am on the way of
customizing.
i recommend that you forget your version and get the new stable one.
hafi
Hey, All!
How do i correctly upgrade my existing slink to current potato? I'll soon have
mirror of /debian/dists/potato .
Another question. As far as i found to make cd's images from mirror i need to
use debian-cd. I found it in hamm. Why do it absent in slink and potato? I think
that thing in
On Sat, 19 Jun 1999, Bob Nielsen wrote:
I had a similar problem with smail. I got around it by using specifying
a MDA in .fetchmailrc.
Bob
I tried replacing smail with exim, and got same error message.
Tried to designate exim as MDA in fetchmailrc and got:
..exim: neither action
Which do you mean, Rage Fury or Rage Pro? They are two separate cards,
or not?
Yep, I have been using mine for 5 months now, since I got it. Actually,
what kernel or distribution that you have does not have much to do with
wether or not your card is supported. What matters is wether your X
I've noticed that I have to manually execute runq after fetchmail
finished getting mail. Prior version of fetchmail (the one in slink)
did the delivery automatically at the end of the run.
Any ideas?
Pf
--
---
Hi,
has anyone gotten NetReality to run on Debian (potato).
If so please let me know how.
TIA
//\\//\\//\\
Regards,
Christian Dysthe
Email: [EMAIL PROTECTED]
http://www.bigfoot.com/~cdysthe
ICQ 3945810
Powered by Debian GNU/Linux
//\\//\\//\\
I have been trying to get all three: Emacs, Netscape Navigator, and
Apache all working on an X-windows Linux system. I switched from
Red
Hat to Debian because Apache was not working on my Red Hat system,
and
rather than try to muddle my way through learning what was wrong, I
figured okay, switch
Hi,
thanks to everybody for their time and reply. I am still trying to get to the
ottom of this. Your replies, and the ones from my ISP -althoguh they do not
offer tech support for Linux they were quite friendly and courteous- made me
think it is a Java problem or my ISP address problem. I will
I am trying to upload articles written with a SOUP reader using uqwk and
inews from their respective Debian packages, but I fail. inews keep telling
me that the groups are invalid.
NNTPSERVER is set to the server that inews should deliver to, and so is
/etc/news/server, but it doesn't seem to
hi
has anyone been able to succsefully run the G2 player on potato.
Real G2 crash as soon as it starts playing.
-Oz
--
NAME Oz Dror, Los Angeles, California
EMAIL [EMAIL PROTECTED] Linux since 8/15/94
PHONE Fax (310) 474-3126
*- On 19 Jun, Pierfrancesco Caci wrote about fetchmail doesn't runq
I've noticed that I have to manually execute runq after fetchmail
finished getting mail. Prior version of fetchmail (the one in slink)
did the delivery automatically at the end of the run.
What is your mta? Exim by
Wyn Snow wrote:
So what I want to do is get a Netscape Navigator (or Communicator)
that
will work with Debian Hamm 2.0.34. Since I make web pages for a
living,
i suspect, you´re trying to run a glibc2.0 netscape on libc5 system.
if you have a glibc5 based system, you must download a
I'd like apt to look at my cd's before looking at the rest of the sites in
my sorces.list, but while I can get it to look at one cd, I can't get it to
look at the second (Official Debian CD's) If I use symlinks to repoint the
Packages file to Packages.cd on the second CD, it will find the packages
hi
I have problems starting win98 on hdb1 with Lilo. When trying
to start win (shift, dos), nothing happens. Linux (hda1) starts fine. my
lilo.conf:
boot=/dev/hda1root=/dev/hda1install=/boot/boot.bmap=/boot/mapvga=normaldelay=20image=/vmlinuz
label=Linux
read-onlyother=/dev/hdb1 label=dos
On Sat, Jun 19, 1999 at 09:40:03PM +0300, Shurik Dovnar wrote:
Hey, All!
How do i correctly upgrade my existing slink to current potato? I'll soon have
mirror of /debian/dists/potato .
1. Edit your /etc/apt/sourceslist to point to potato or unstable instead
of stable.
2. Apt-get
I haven't had problems with my exim/fetchamil setup, even after moving from
slink to potato. I do remember that I had to edit my fetchmailrc file at some
point though becuase the syntax had changed. If you have an old .fetchmailrc
that is being loaded from some directory for instance because you
92 matches
Mail list logo