El Sun, Oct 10, 1999 at 07:35:25PM -0400, Pablo Vazquez dijo:
hola hoy los molesto para preguntar sobre el funcionamiento de pppd con
leased lines
el tema es que segui las instrucciones de howto pero me quedo en lo
siguiente
despues de levantar el demonio con
#pppd /dev/ttyS2 115200
El Sun, Oct 10, 1999 at 06:37:13PM -0300, [EMAIL PROTECTED] dijo:
Holas,
Al instalar las xlib6g y svgalib me tira estas warnings
--
ldconfig: warning: can't open /usr/lib/libm.so (No such file or directory),
skipping
ldconfig:
Ahh, alguien sabe donde se puede conseguir mas info sobre las opciones de
APM que tiene el kernel?
On Fri, Oct 08, 1999 at 09:56:48AM -0300, [EMAIL PROTECTED] wrote:
Para ahorrar energia y disminuir el calentamiento del
procesador puedes compilar el kernel con:
* General Setup
*
Alguno sabe de donde se puede sacar una lista con las placas que soportan
la opción de frame buffer?
On Mon, Oct 11, 1999 at 04:56:57PM +0200, shadow wrote:
PREGUNTA:
En el trabajo tenemos un pentium dual con adaptador SCSI Adaptec AIC 7880,
disco duro SCSI, CD-ROM y CDRW SCSI, tarjeta grafica QDI (i740) 256Mb de RAM
y quisieramos instalar debian 2.1, pero yo recuerdo haber leido en esta
Existe algun lugar donde se reporten todos esos problemitas de seguridad
(lease exploits)?
El martes 12 de octubre de 1999 a la(s) 11:29:49 -0300, [EMAIL PROTECTED]
contaba:
Existe algun lugar donde se reporten todos esos problemitas de seguridad
(lease exploits)?
La lista de correo más conocida es bugtraq. No me acuerdo cómo
es para suscribirse pero mira
shadow,
Yo tambien he leido recientemente que el proximo kernel quiza
pueda funcionar con los Winmodems. Sin embargo, despues de haber estado
al menos tres o cuatro annos trabajando como tecnico de apoyo/soporte para
una ISP aqui en los EEUU, mi consejo personal es que no los uses... ni
Hola lista:
Desde que actualice a slink no puedo ejecutar con exito
gs -sDevice=stcolor -sOutputFile=/dev/lp0 -r720x720 myfile.ps. Antes
si funcionaba. Sin embargo gs -sDevice=stcolor -sOutputFile=/dev/lp0
-r360x360 myfile.ps sigue funcionando. ¿Teneis alguna idea de
que esta pasando?¿Tiene
On Sun, Oct 10, 1999 at 05:04:34PM +0200, Rafael Martín Candial wrote:
Muy buenas...
Quisiera poder configurar mi Voodoo3 para utilizar la XWindows.
He bajado los paquetes de 3dfx en formato rpm. Yo tengo Debian 2.0 (hamm), as?
que he convertido los rpm en deb con alien.
UUmmm.
He
Hola:
¿Tengo un disco son sectores rotos?.Intento formatearlo en MS-DOS y el
proceso se cuelga al llegar al 20%.Con mke2fs me pasa lo mismo.
Me pregunto si esto tiene alguna solución.Oí que con un formateo a bajo
nivel se podría separar sectores buenos de los estropeados. ¿Alguien
sabe como se
On Tue, 12 Oct 1999 [EMAIL PROTECTED] wrote:
Alguno sabe de donde se puede sacar una lista con las placas que soportan
la opción de frame buffer?
Vas al núcleo a la opción de framebuffer, la activas, y mostrará las
tarjetas soportadas. En mi 2.2.10 son:
Permedia2 support (experimental)
VESA
On Sat, Oct 09, 1999 at 12:12:32PM -0300, Alexander Gieg wrote:
Como e' o teclado portugues?
Imediatamente à esquerda do Enter tem em cima a tecla com o acento agudo e
acento grave; em baixo o acento circunflexo e o til. À esquerda destas teclas
tem em cima a tecla com o asterisco, o sinal de
Clovis Sena wrote:
Oi,
se vc poder me informar onde eu os posso pegar eu os coloco no
linux.brasileiro.net
t+
Estou enviando diretamente a você, este documento não
está ainda disponível em nenhuma parte da Net, este
site vai divulgar de primeira mão :).
Já acertei com Ardo a organização das
Para testar fiz o seguinte procedimento:
- Gravei o meu próprio mail que me foi devolvido pela mailing list
com o nome pt_pt.map
- Apaguei tudo o que estava antes de -- INICIO -- e depois de -- FIM
-- incluindo obviamente estas linhas
- Executei o comando: loadkeys pt_pt.map
Não
Olá,
Alguém já usou ou usa o wdm? Eu estou usando o slink, e o X Windows
starta automaticamente com o xdm. Eu instalei o wdm para testar. A primeira
vez que rodou, não tive problemas, mas quando reiniciei a máquina o
computador travava (inclusive o teclado), logo que o
aphro == aphro [EMAIL PROTECTED] writes:
aphro [EMAIL PROTECTED] /usr/local/games/q3test] dpkg -S libXt.so.6 xlib6g:
aphro /usr/X11R6/lib/libXt.so.6 xlib6: /usr/lib/libc5-compat/libXt.so.6
aphro xlib6g: /usr/X11R6/lib/libXt.so.6.0 xlib6:
aphro /usr/lib/libc5-compat/libXt.so.6.0
Greetings Fellow Debian Enthusiasts,
I had a number of questions I have pondered all week, and thought
perhaps someone might know the answer. Any help is most
apprieciated.
#1 After upgrading my slink box to potato a week or 2 ago,
I started getting the following error every time I install a
Monday, October 11, 1999, 4:15:36 PM, Todd wrote:
is find and good, because I can now use the built in kill command
in bash for various things, but I did have to fix the poff script
for ppp, because it broke when /bin/kill because /bin/skill.
Just in case anyone else had the same problem and
bwarsing [EMAIL PROTECTED] wrote:
can anybody tell me to set the line wrap to 80
in vi?
i can't find this type of info anywhere.
Thanks,
Type :set textwidth=80 in command mode.
--
Francois Deppierraz student
http://www.ctrlaltdel.ch
ICQ: 176 770 09
Where can I find the modules source (*.c files) that were used to make the
modules that are copied to /lib/modules/2.0.36/ by default ?
-BEGIN PGP SIGNED MESSAGE-
On Mon, 11 Oct 1999, Victoria Catterson wrote:
I accidentally deleted the Debian menu while playing with
WMakerconf. Is there a way I can get it back?
First, edit the file ~/GNUstep/Defaults/WMRootMenu so it contains only the
following. Don't include the
Although a number of people have supported my decision to make $HOME/mail
the mailbox root for the UW imap server I maintain, I think it will be for
the best overall if I make it $HOME again. Reasons:
1) That's what most of the bug reports are about.
2) That's what the upstream distribution
Brad ([EMAIL PROTECTED]) wrote:
Going to runlevel 0 or 6 will cause the system to be halted or
rebooted, respectively. For example, if we go to runlevel 6 (reboot)
first all /etc/rc6.d/KXX scripts will be executed alphabetically
with stop as the first argument.
Then the
Steve George ([EMAIL PROTECTED]) wrote:
Any pointers to info along these lines would be great - atm I've had to giveup
mutt for Netscape mailer :-(
Mutt can rewrite the From: header for you.
In my ~/.muttrc (sort of) I have this:
my_hdr From: Greg Wooledge [EMAIL PROTECTED]
I don't use
-BEGIN PGP SIGNED MESSAGE-
On Mon, 11 Oct 1999, Todd Suess wrote:
#2 I saw several messages refer to newer source/etc for
Pine, I am running 3.96 but if 4.xx is floating around out
there somewhere, could someone point me in the right direction
to find it? Sounds like it adds some
This is a guess based on your description of what happens. It almost
sounds like you may have, at one point, had this line in your lilo.conf
file...
boot=/dev/hda1
and the rest of the file was the same as it is now.
That would have installed lilo in the boot sector of /dev/hda1, and it
may
[EMAIL PROTECTED] ([EMAIL PROTECTED]) wrote:
I did as you suggested and changed /etc/rcS.d/S50hwclock.sh to
K50hwclock.sh and once rebooted the time was 20:00 instead of 0800... hence
it didn't work.
Actually, that's the one that's correctly named. My complaint was with
the links in
-BEGIN PGP SIGNED MESSAGE-
On Tue, 12 Oct 1999, shaul wrote:
Where can I find the modules source (*.c files) that were used to make the
modules that are copied to /lib/modules/2.0.36/ by default ?
Most of those are items that were selected to be compiled as modules when
the kernel
Eric G . Miller wrote:
You need to go to Edit-Preferences-Navigator-Applications then look
for the realaudio entry (if you have one). It should have something
like:
Description: RealAudio
MIMEType : audio/x-pn-realaudio
Suffixes : ra, ram
x
http://www.captech.com/jobs/tech_writer.html
Captech is using Debian/Linux and has hired a number of Debian developers.
Note that it says Local applicants only in the URL. Contact me if you
are not in the Bay Area. We might find a way.
I use gs -sDevice=stcolor -sOutputFile=/dev/lp0 -r720x720 myfile.ps
and I only get white papers
but with gs -sDevice=stcolor -sOutputFile=/dev/lp0 -r360x360 myfile.ps
no problem.
All this happens went I actialized to slink. Before this all woked OK
What's the problem?. Has it any solution? Thanks
Mirek:
Hmm, it not a problem. Add alias:
alias parport_lowlevel parport_pc
and all is fine:
I tried that (by adding that line to /etc/modutils/aliases - correct
way?)...
didn't change anything... Can the parallel port be used as a module for
printing?
monkeyhouse:/home/rich# cat
I use gs -sDevice=stcolor -sOutputFile=/dev/lp0 -r720x720 myfile.ps
and I only get white papers
but with gs -sDevice=stcolor -sOutputFile=/dev/lp0 -r360x360 myfile.ps
no problem.
All this happens went I actialized to slink. Before this all woked OK
What's the problem?. Has it any solution? Thanks
A long time ago, in a galaxy far, far way, someone said...
Mirek:
Hmm, it not a problem. Add alias:
alias parport_lowlevel parport_pc
and all is fine:
I tried that (by adding that line to /etc/modutils/aliases - correct
way?)...
That's part of the correct way - you need
Has anyone gotten the latest ALSA (from potato) to compile? I've been
trying for a while now, and there's always some problem. I'd renew my
efforts if I knew it was possible, so any hints?
--
I already have all the latest software.
-- Laura Winslow, Family Matters
Dwayne Litzenberger -
pine 4.x is good, the main reason to upgrade is it supports html based
email, which if you communicate with people with stupid mail clients that
use html(curses it silently) you won't have to kill them if they email you
something you cant read :/
nate
Thank you. I am looking for the common 8390 and ne NIC modules source files.
It seems I should explain why I am asking.
I have a NIC which I am using with the ne module. It seems to work well, apart
from the fact that when I boot the machine I have to disconnect the network,
and reconnect it
can someone explain what the XF86 option 'doublescan' is ? I'm trying to
define modelines so i can watch videoCDS full screen with MPEGTV.
not having much luck though. For some reason the modelines generated from
XF86Setup make the really low resolutions (below 640x480) run at really
high
This one's a quickie. Seems to me that if I want to replace a package
I've already installed with the distro (slink) with my own build of the
source, I should just be able to remove (w/o purging configs) the package
using dselect/dpkg and then go ahead and install my own build.
Is there any
On Mon, Oct 11, 1999 at 09:19:37AM +0700, Oki DZ wrote:
Brian May wrote:
This is what I would do. The only possible problem I can imagine is
if you try to connect to the Internet host that really does have the
address 95.x.x.x (you would get the host on the local network instead).
I
This one's a quickie. Seems to me that if I want to replace a package
I've already installed with the distro (slink) with my own build of the
source, I should just be able to remove (w/o purging configs) the package
using dselect/dpkg and then go ahead and install my own build.
Is there
In article [EMAIL PROTECTED] you write:
I have heard that file locking is not implemented in the user
level server, but you need the kernel level server instead.
Well, that would explain why it wouldn't work Is this documented
anywhere?
I think I saw a message on the linux-kernel mailing
In article [EMAIL PROTECTED] you write:
George Bonser wrote:
Yes, you can ipmasq to nat anything. It simply uses masquerades the given
source address to the outbound interface regardless of ip address.
Hi,
I tested a router between the server that serving nat and my machine the
other day.
Hi Debian
I'm a new user for LINUX,
can you help to make me more better to use LINUX
next time.
Send me more information about LINUX software
and more.
Can I heck the web-site with LINUX OS ?
Send me information abaout that ..
Thank's
=
Hi Debian
I'm a new user for LINUX,
can you help to make me more better to use LINUX
next time.
We can't help you with that. If you have any specific questions, yes, that
can be helped with. But we can not explain to you step by step how to use
Linux. Thats what all the HOWTOs and
I am seeking an application for creating .deb files from perl modules.
Does any one know of something like this? I need something on the order
of Alien. Thanks!
--
John Foster
AdVance-Computing Systems
[EMAIL PROTECTED]
ICQ# 19460173
-BEGIN PGP SIGNED MESSAGE-
On Mon, 11 Oct 1999, Dwayne C . Litzenberger wrote:
Has anyone gotten the latest ALSA (from potato) to compile? I've been
trying for a while now, and there's always some problem. I'd renew my
efforts if I knew it was possible, so any hints?
I have it
-BEGIN PGP SIGNED MESSAGE-
On Mon, 11 Oct 1999, Jim wrote:
This one's a quickie. Seems to me that if I want to replace a package
I've already installed with the distro (slink) with my own build of the
source, I should just be able to remove (w/o purging configs) the package
using
-BEGIN PGP SIGNED MESSAGE-
On Tue, 12 Oct 1999, John Foster wrote:
I am seeking an application for creating .deb files from perl modules.
Does any one know of something like this? I need something on the order
of Alien. Thanks!
If the perl module is from CPAN, you can just about take
Hi,
I have an HP laserjet 6L and using magicfilter, a2ps and gs versions which
came with slink.
printing seems to more or less happen, except that the printable area seems to
be incorrectly set. For example when I print a text file using a2ps, it
starts printing too far inside the page edge and
Hi,
I am a newbie and have never installed a .deb package by hand so I
am a bit weary a to proper procedure.
I understand the different steps involced in making the istallation
feasible, but I am rather apprehensive as to what will happen after
I complete the install.
For example:
If I do...
If the perl module is from CPAN, you can just about take the debian
directory from any debianized CPAN perl module and make it work with a
minimum of changes.
libnet-telnet-perl is the one i used when i did this. YMMV.
Here
On Mon, Oct 11, 1999 at 10:44:12PM -0700, bwarsing wrote:
[...]
feasible, but I am rather apprehensive as to what will happen after
I complete the install.
For example:
If I do...
dpkg -i nmap_2.12-3.deb
...from a users home directory
will it install it and configure it properly, or
Do any of you see any potential problem with putting the
'nosuid' option for the '/' directory in /etc/fstab? I'm trying
to follow a Linux security How-To, but am less encouraged to
implement it after reading more about it (e.g., that it might
be less secure to do so with perl-suid
How long before debian becomes easier to install. I played with it for a year.
Successful in many aspects but eventually I quit as I don't have enough
programming knowledge to get it to run as well as I want it too. I have an
intel
i740 agp video card so I had to update to the driver.(the
Hi all!
I want to receive mails on my server with the addresse
[EMAIL PROTECTED] When I send mails to [EMAIL PROTECTED]
or to [EMAIL PROTECTED] everything is allright.
But when I send mails to [EMAIL PROTECTED] I get this
reply:
- Transcript of session follows -
... while talking to
Seriously, Mike, bleeding edge hardware and software will be either
more expensive or more difficult to install. I choose the slightly more
difficult route to getting work done, because high market profile tools
(like Bill's favorites) are too expensive and lacking in security for
Hi,
I've an S3 Virge GX2 with AGP, and it seems to me, that causes some
stability problems in my Slink box. Which X server is recommended?
Is XF86-S3V 3.3.5 compatible with my card?
Regards,
I think that it was XF86_SVGA for S3 Virge video cards!
Geroy
On Tue, Oct 12, 1999 at 02:11:41AM -0600, Art Lemasters wrote:
Art, dimly reminiscing of having used his birdbrain and beak to peck the
enter key repeatedly for a 1.0 install on older hardware...
...or maybe it was 1.2 (rex?). Anyway, my point was that installs
have been fairly easy with
I have downloaded Enlightenment 0.16 .debs from www.debian.org/~ljlane.
Well, when I start E... it gives me an indicator in terms of percentage.
When it hits 91%... it segfaults.
Anybody has a fix for this?
regards,
= == Andre M. Varon - Technical Head
= = == Lasaltech, Inc. -
Oops - you're quite right.
fdisk /MBR from a dos boot disk...?
Martin
From: Tom Pfeifer [EMAIL PROTECTED]
To: debian-user@lists.debian.org
Subject: Re: LILO won't load win95, but no error...??
Date: Mon, 11 Oct 1999 20:09:16 -0400
This is a guess based on your description of what happens. It
I'm using netscape with wwwoffle (www offline explorer, a personal http
proxy),
and it works very well. If you install this package, then you can switch off
the netscape cache, and the wwwoffle will keep the size of the cache below
the
configured limit. This solution has other advantages
for a ASUS SC-200 scsi card to hook up my
scanner. I have yet to set up my cdrw but I had it working
on a previous install so that should work without problems.
So what is this post about? Read on..
The rest of this post will be about 3dfx/openGL/Mesa etc
and sound configuration.
A couple of
Hi Guys,
This is slightly offtopic, but I just downloaded Real Player and I was wondering
if there was a way to save real audio file locally so I don't have to fire up
my
ppp connection just to listen to .ram files.
Also, is there a way to convert .rm files to wav?
Thanks alot,
Cyrus
--
Hi
I have got debian box with 96 Mb as ram .
I am using LILO to boot in linux.
But It always show me 64 mb ram with free command.
what is the option to be added in lilo to make it read 96 mb ram.
Please email me back with your suggestions.
Thanks
Rajesh
DP == David Purton [EMAIL PROTECTED] writes:
DP Hi,
DP I have an HP laserjet 6L and using magicfilter, a2ps and gs
DP versions which came with slink.
DP printing seems to more or less happen, except that the printable
DP area seems to be incorrectly set. For example when I print a
When attempting to upgrade, in pieces, from Slink to Potato, I got this
error message when typing apt-get dist-upgrade:
E: Sorry, you don't have enough free space in /var/cache/apt/archives/
Do I have too small a partition, is that the problem? What can I do to fix
this?
Thanks.
--
David J.
While using dselect when I really didn't know what I was doing, I'd select
packages and in the heat of the moment, wind up putting some things on hold,
flagging others for deletion, and eventually quitting out of confusion.
But now that I know how to use dselect better, I'd like to update some of
I have read a ton of how to, and still not been able to figure this out.
I want to be able to print from linux to a shared windows network
printer. Some of the important info:
pinter share name=deskjet
computer its on=sarah
workgroup=Wilson
I tried to follow the howto on this, but I am not
On 12-Oct-99 Cyrus Patel wrote:
Hi Guys,
This is slightly offtopic, but I just downloaded Real Player and I was
wondering if there was a way to save real audio file locally so I
don't have to fire up my ppp connection just to listen to .ram files.
It depends (aspects of this are covered
Jim wrote:
This one's a quickie. Seems to me that if I want to replace a package
I've already installed with the distro (slink) with my own build of the
source, I should just be able to remove (w/o purging configs) the package
using dselect/dpkg and then go ahead and install my own build.
Do
append=mem=96M
On Tue, Oct 12, 1999 at 01:03:31PM +0100, Rajesh Mittal wrote:
Hi
I have got debian box with 96 Mb as ram .
I am using LILO to boot in linux.
But It always show me 64 mb ram with free command.
what is the option to be added in lilo to make it read 96 mb
Hi folks,
On Tue, Oct 12, 1999 at 02:08:23PM +0200, Laurent Martelli wrote:
DP == David Purton [EMAIL PROTECTED] writes:
DP printing seems to more or less happen, except that the printable
DP area seems to be incorrectly set. For example when I print a
DP text file using a2ps, it
(Ted Harding) wrote:
When you get the .ram file from the supplying site, this usually
has a URL to the location of the .ra file (the actual audio file)
itself, similar to the following:
pnm://broadcast9.activate.net/radiofree/channel1.rm
pnm://ras.radio.cz/zpravy.ra
You will find,
Tiago Alves Macambira wrote:
Hi Folks!
Well, I just bought a Blaster 3D Banshee AGP and to my surprise
bla bla bla
I just sending this e-mail to thank those ones that helped me...
In special, I would like to thank Taupter [EMAIL PROTECTED] by
his post and his indication of the
David J Kanter [EMAIL PROTECTED] writes:
DJK When attempting to upgrade, in pieces, from Slink to Potato, I
DJK got this error message when typing apt-get dist-upgrade:
DJK
DJK E: Sorry, you don't have enough free space in /var/cache/apt/archives/
DJK
DJK Do I have too small a partition, is that
I'm very confused. I have a samba server running print services, and the
only real problem I have with it is that my users keep getting out of
disk space errors when printing. My /var partition is totally full:
Filesystem 1024-blocks Used Available Capacity Mounted on
/dev/sda6
hey guys,
I have wordperfect installed, but I may have mangled the installation.
when I try to start it, I get
./xwp: can't load library 'libXpm.so.4'
hmm. do I have this library? Should I move my WordPerfect directory
out of home, to usr/local?
dumb questions, perhaps, but thanks anyway!
real audio/video has a protection scheme, which lets the broadcaster
decide wether they want you to be able to record the stream or not. there
was a crack floating around for the winXX version to record RA but i
havent seen a linux one(and i dont have the winXX one either, it was about
2 years
On 12-Oct-99 Kristopher Johnson wrote:
(Ted Harding) wrote:
When you get the .ram file from the supplying site, this usually
has a URL to the location of the .ra file (the actual audio file)
itself, similar to the following:
pnm://broadcast9.activate.net/radiofree/channel1.rm
On Sun, 10 Oct 1999, tf wrote:
hey guys,
I have wordperfect installed, but I may have mangled the installation.
when I try to start it, I get
./xwp: can't load library 'libXpm.so.4'
hmm. do I have this library? Should I move my WordPerfect directory
out of home, to usr/local?
Without having tried anything on my own system, I would suggest
that you remove the .enlightenment directory in your home directory
and try to load it again.
It is very likely that an old configuration file is incompatible with
the new version. This has happened in previous E releases.
Please
I just installed RV. It seems to work as far as playing a directed file
as in netscape, but the buttons for setting up preferences, selecting
sites, etc do not work. Any help?? Thanks!
--
John Foster
AdVance-Computing Systems
[EMAIL PROTECTED]
ICQ# 19460173
On 12-Oct-99 Ted Harding wrote:
On 12-Oct-99 Cyrus Patel wrote:
Also, is there a way to convert .rm files to wav?
I don't know the answer to that (and I wish I did).
Hope this helps,
Ted.
Which reminds me -- I have a related query of my own.
If you want to try the files I'm talking
While we're on the subject of realplayer... I have G2 installed and it
plays most realaudio formats just fine. However, when I try to listen
to hockey games through broadcast.com, it plays the introductory
advertisement, but then crashes when it tries to play the broadcast.
Any suggestions?
On Tue, Oct 12, 1999 at 12:57:16PM +0200, Joakim Svensson wrote:
Alsa ? OSS ?
or just recompile kernel and skip Alsa altogehter (soundblaster 128PCI).
kernel drivers will be lighter and more stable. On the other hand, you might
get some fancy features with Alsa (didnt try OSS since AFAIK
Hi list!
I have some serious trouble using my Epson GT5000 scsi scanner. I use it with
an aha1510b ISA adapter (aha152x-driver). There are two harddisk attched
internally, one is active terminated. The scanner is attached via a 1m long
hd50-centronics cable and on the sub-d25 port of the
I have a Savage4 graphics card. I am trying to run X on my computer, but
don't want to use VGA16. I downloaded the latest version of X 3.3.5, which
was supposed to support Savage4 for Linux, but was unable to find it in the
supported card list. Does anyone know what I can do to get this to
Lev,
This is the way I generally do it, although there are some other
ways. First, I run less or more on /var/run/httpd.pid (I am currently
running a Red Hat distro here, but you should look for the same file in
the Debian box which perhaps will be locate somewehere else). This will
While trying to run satan here, I received a _compilation_
error message. Have any of you tried satan in potato (as I have)
and received the same message (or not)?
Art
Robert,
It seems to be doing the same in my box, but I do not know why.
Nitebirdz
On Fri, 8 Oct 1999, Robert Rati wrote:
I've been stumped on why SO5.1 hasn't been working on my machine and on a
whim, I did a ps aux | grep soffice while it was loaded. What I found was
over 10
John Foster [EMAIL PROTECTED] writes:
[...] unless there is some way to
make dselect apt recognize that the required packages are installed,
though not where debian expects them. [...]
Take a look at the debian package equivs -- it was made for that;
you must be careful with the
David J. Kanter [EMAIL PROTECTED] writes:
Is there any way to wipe the slate clean and get rid of this mystery cache
list?
The mystery cache list is /var/lib/dpkg/status -- you don't want to
remove it, but you may want to edit it. Be careful, and keep a
backup.
Would someone be able to confirm my suspicion?
--
David Natkins
Email to: [EMAIL PROTECTED]
Fax to: (718) 488-1780
Phone: (718) 403-2474
On Tue, Oct 12, 1999 at 11:06:58AM -0400, Ingles, Raymond wrote:
From: Alisdair McDiarmid [mailto:[EMAIL PROTECTED]
[...]
I've got a PIII/450, 128MB, Diamond Viper 770 TNT2 system here
running potato current and it's quite slow in X. Dragging windows
around is slower than my PII/350 with
Could somebody please explain to me how I can get eggdrop working with
Debian. I have installed tcl8 using both *.dev and *.tar.gz. But everytime,
even tho I know tcl is installed...when I try and run eggdrop (yes it
compiles just fine) it says...
./eggdrop: error in loading shared libraries
On Sun, 10 Oct 1999 05:32:57 tf wrote:
hey guys,
I have wordperfect installed, but I may have mangled the installation.
when I try to start it, I get
./xwp: can't load library 'libXpm.so.4'
hmm. do I have this library? Should I move my WordPerfect directory
out of home, to
Hi,
At the moment I am using a Sound Blaster vibra16x pnp card,
this card is not really supported by OSSFree (kernel)
or ALSA. Although the card produces sound, it gives dma
errors when using the second dma channel and it is
unable to work in full duplex. I am getting fed up with
this card
Jim Ruby wrote:
[snip]
/sbin/ipchains -P input DENY
/sbin/ipchains -P output DENY
/sbin/ipchains -P forward DENY
/sbin/ipchains -F input
/sbin/ipchains -F output
/sbin/ipchains -F forward
/sbin/ipchains -A input -j ACCEPT -i lo
/sbin/ipchains -A input -j ACCEPT -i eth0 -s
1 - 100 of 133 matches
Mail list logo
